All Stories

  1. Thermal energy storage performance evaluation of bio-based phase change material/apricot kernel shell derived activated carbon in lightweight mortar
  2. Applications of Recycled and Crushed Glass (RCG) as a Substitute for Natural Materials in Various Fields—A Review
  3. Capitalization of tires waste as derived fuel for sustainable cement production
  4. Accumulation of Heavy Metal Ions from Urban Soil in Spontaneous Flora
  5. Intensification of the photodegradation efficiency of an emergent water pollutant through process conditions optimization by means of response surface methodology
  6. Photocatalytic Removal of Antibiotics from Wastewater Using the CeO2/ZnO Heterojunction
  7. STUDY OF MICROALGAE INFLUENCE ON CARBON CAPTURE FROM GASEOUS STREAMS WITHIN THE BIOTRICKLING FILTRATION PROCESS
  8. Studies on the Removal of Congo Red Dye by an Adsorbent Based on Fly-Ash@Fe3O4 Mixture
  9. Development, characterization, and performance analysis of shape‐stabilized phase change material included‐geopolymer for passive thermal management of buildings
  10. Development and Characterization of a Novel Soil Amendment Based on Biomass Fly Ash Encapsulated in Calcium Alginate Microspheres
  11. Enhancing the TiO2-Ag Photocatalytic Efficiency by Acetone in the Dye Removal from Wastewater
  12. Biosorption Potential of Microbial and Residual Biomass of Saccharomyces pastorianus Immobilized in Calcium Alginate Matrix for Pharmaceuticals Removal from Aqueous Solutions
  13. Biosorptive Removal of Ethacridine Lactate from Aqueous Solutions by Saccharomyces pastorianus Residual Biomass/Calcium Alginate Composite Beads: Fixed-Bed Column Study
  14. Recent advances in removal of Congo Red dye by adsorption using an industrial waste
  15. Excellent ambient oxidation and mineralization of an emerging water pollutant using Pd-doped TiO 2 photocatalyst and UV-A irradiation
  16. Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash
  17. Using Fly Ash Wastes for the Development of New Building Materials with Improved Compressive Strength
  18. Encapsulation of Saccharomyces pastorianus Residual Biomass in Calcium Alginate Matrix with Insights in Ethacridine Lactate Biosorption
  19. Removal of Toxic Copper Ion from Aqueous Media by Adsorption on Fly Ash-Derived Zeolites: Kinetic and Equilibrium Studies
  20. New construction materials synthesized from water treatment sludge and fired clay brick wastes
  21. Application of Saccharomyces cerevisiae/Calcium Alginate Composite Beads for Cephalexin Antibiotic Biosorption from Aqueous Solutions
  22. Performance assessment of five adsorbents based on fly ash for removal of cadmium ions
  23. ASYMMETRIC CELLULOSE ACETATE MEMBRANES USED IN SEPARATION APPLICATIONS
  24. FLY ASH MAGNETIC ADSORBENT FOR CADMIUM ION REMOVAL FROM AN AQUEOUS SOLUTION
  25. Adsorption Performance of Modified Fly Ash for Copper Ion Removal from Aqueous Solution
  26. Magnetic Solid-Phase Extraction of Cadmium Ions by Hybrid Self-Assembled Multicore Type Nanobeads
  27. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  28. Eco-friendly Nano-adsorbents for Pollutant Removal from Wastewaters
  29. Fly Ash Coated with Magnetic Materials: Improved Adsorbent for Cu (II) Removal from Wastewater
  30. TiO2 Doped with Noble Metals as an Efficient Solution for the Photodegradation of Hazardous Organic Water Pollutants at Ambient Conditions
  31. In-situ filler loading vs. conventional filler
  32. Zn/La Mixed Oxides Prepared by Coprecipitation: Synthesis, Characterization and Photocatalytic Studies
  33. Viscosity of potassium carbonate solutions promoted by new amines
  34. Eco-Friendly Materials Obtained by Fly Ash Sulphuric Activation for Cadmium Ions Removal
  35. Doping Titanium Dioxide with Palladiun for Enhancing thePhotocatalytic Decontamination and Mineralization of a Refractory Water Pollutant
  36. Eco-friendly Nano-adsorbents for Pollutant Removal from Wastewaters
  37. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  38. Analcime-bearing rocks as advanced sorbents
  39. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  40. Bismuth-Doped Nanohydroxyapatite Coatings on Titanium Implants for Improved Radiopacity and Antimicrobial Activity
  41. Biogeosorbents for solving ecological problems
  42. Preparation and Properties of Ceramic Materials from Coal Fly Ash
  43. New Approaches in Modeling and Simulation of CO2 Absorption Reactor by Activated Potassium Carbonate Solution
  44. Clay- and zeolite-based biogeosorbents: modelling and properties
  45. Efficiency Evaluation for Titanium Dioxide-Based Advanced Materials in Water Treatment
  46. NEW TiO2-Ag NANOPARTICLES USED FOR ORGANIC COMPOUNDS DEGRADATION
  47. Investigation on hydroxyapatite coatings formation on titanium surface
  48. Synthesis and characterisation of a binder cement replacement based on alkali activation of fly ash waste
  49. SYNTHESIS OF ZnO/CuO NANOCOMPOSITES WITH CNF AND Ag BY GEL SOL
  50. Studies on adsorption of oxytetracycline from aqueous solutions onto hydroxyapatite
  51. Cerium-doped hydroxyapatite/collagen coatings on titanium for bone implants
  52. PREPARATION AND CHARACTERIZATION OF NANOCOMPOSITE MATERIAL BASED ON TiO2-Ag FOR ENVIRONMENTAL APPLICATIONS
  53. EFFECTIVENESS FACTOR APPROACH FOR CHEMICAL ABSORPTION PROCESS
  54. NEW ADSORBENT MATERIALS ON THE BASE OF ASH AND LIME FOR LEAD REMOVAL
  55. Power plant wastes capitalization as geopolymeric building materials
  56. Removal of oxytetracycline from aqueous solutions by hydroxyapatite as a low-cost adsorbent
  57. ASSESSMENT OF GROUNDWATER AND SURFACE WATER CONTAMINATION BY LANDFILL LEACHATE: A CASE STUDY IN NEAMT COUNTY, ROMANIA
  58. New trends in the mechanisms of increasing productivity of mineral-based materials
  59. Influence of Tire Waste over Durability of Polymer Concrete
  60. Retention of barium and europium radionuclides from aqueous solutions on ash-based sorbents by application of radiochemical techniques
  61. Synthesis of Zeolite from Fly Ash and their Use as Soil Amendment
  62. Kinetic and equilibrium studies on adsorption of Reactive Blue 19 dye from aqueous solutions by nanohydroxyapatite adsorbent
  63. Removal of Zn(II) ions from aqueous media on thermal activated sawdust
  64. Retention of cesium from aqueous solutions using synthetic zeolites produced from power plant ash
  65. Use of the Information Concerning the Products Manufacturing in Innovative Learning and Education Programme for Health Care Sector
  66. Structure and Strength of Flocs of Precipitated Calcium Carbonate Induced by Various Polymers Used in Papermaking
  67. Removal of cadmium(II) from aqueous solution by adsorption onto modified algae and ash
  68. A NEW STRATEGY FOR PENTACHLOROPHENOL MONITORING IN WATER SAMPLES USING ULTRA-HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY TANDEM
  69. New materials synthesized from ash under moderate conditions for removal of toxic and radioactive metals
  70. An Overview on Assistive Technology Training Courses for Salespersons
  71. A low-cost sorbent for removal of copper ions from wastewaters based on sawdust/fly ash mixture
  72. Acid Black 172 dye adsorption from aqueous solution by hydroxyapatite as low-cost adsorbent
  73. Removal of Astrazone Blue from aqueous solutions onto brown peat. Equilibrium and kinetics studies
  74. Neuro-evolutionary optimization methodology applied to the synthesis process of ash based adsorbents
  75. Uranium removal from aqueous solutions by raw and modified thermal power plant ash
  76. Prediction of properties of polymer concrete composite with tire rubber using neural networks
  77. Obtaining and Utilizing Cellulose Fibers with in-Situ Loading as an Additive for Printing Paper
  78. Removal of Reactive Blue 204 Dye from Aqueous Solutions by Adsorption Onto Nanohydroxyapatite
  79. Behaviour of short polymer-high strength concrete columns under eccentric compression
  80. Influence of Different Additions on Frost-Thaw and Chemical Resistance of Polymer Concrete
  81. Removal of heavy metal ions from aqueous solutions using low-cost sorbents obtained from ash
  82. Low cost adsorbents obtained from ash for copper removal
  83. Using Neural Networks for Prediction of Properties of Polymer Concrete with Fly Ash
  84. HOMOGENEOUS AREAS DELIMITATION BY CONSIDERING THE ENERGY DEMAND FOR PLANTS GROWING IN COVERED SPACES
  85. IMPROVING SOIL QUALITY BY ADDING MODIFIED ASH
  86. SIMULTANEOUS REMOVAL OF ASTRAZONE BLUE AND LEAD ONTO LOW COST ADSORBENTS BASED ON POWER PLANT ASH
  87. Comparison of Mechanical Properties for Polymer Concrete with Different Types of Filler
  88. CaCO3 CONTROLLABLE SYNTHESIS BY DOUBLE EXCHANGE METHOD USING CaCl2 RESIDUAL SOLUTIONS
  89. Obtaining and Characterization of the Polymer Concrete with Fly Ash
  90. STUDY OF MORPHOLOGY FOR GEOPOLYMER MATERIALS OBTAINED FROM FLY ASH
  91. UTILIZATION OF COAL FLY ASH FROM POWER PLANTS
  92. WASTES USED IN OBTAINING POLYMER COMPOSITE
  93. UTILIZATION OF COAL FLY ASH FROM POWER PLANTS - I. ASH CHARACTERIZATION