All Stories

  1. Analysis of the Influence of Blanking Clearance on the Wear of the Punch, the Change of the Burr Size and the Geometry of the Hook Blanked in the Hardened Steel Sheet

    Article • Materials, April 2019, MDPI AG

    PhD. Jacek JM MUCHA

  2. Plastic Formed and Spot Welded Joints Strength of S350GD+Z Steel

    Article • Tehnicki vjesnik - Technical Gazette, December 2018, Mechanical Engineering Faculty in Slavonski Brod

    PhD. Jacek JM MUCHA

  3. The strength of traditional and self-pierced riveted joints

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    PhD. Jacek JM MUCHA

  4. Wear Study of Mechanical Clinching Dies During Joining of Advanced High-Strength Steel Sheets

    Article • Strength of Materials, September 2017, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  5. Experimental Study of Inconel 718 Surface Treatment by Edge Robotic Deburring with Force Control

    Article • Strength of Materials, July 2017, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  6. Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets

    Article • Strength of Materials, July 2017, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  7. FEM Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline

    Article • Strength of Materials, May 2017, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  8. The Quality Issue of the Parts Blanked from Thin Silicon Sheets

    Article • Journal of Materials Engineering and Performance, March 2017, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  9. The Application of Laboratory X-Ray Micro-Diffraction to Study the Effects of Clinching Process in Steel Sheets

    Article • Acta Physica Polonica A, October 2016, Institute of Physics, Polish Academy of Sciences

    PhD. Jacek JM MUCHA

  10. FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels

    Article • Strength of Materials, July 2016, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  11. Influence of Different Thermochemical Treatments of Bolts on Tightening Parameters of a Bolted Joint

    Article • Strength of Materials, July 2016, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  12. The tool surface wear during the silicon steel sheets blanking process

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, June 2016, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    PhD. Jacek JM MUCHA

  13. Preface to the Special Issue on “Methods and Applications in Mechanical Engineering”

    Article • Open Engineering, April 2016, De Gruyter

    PhD. Jacek JM MUCHA

  14. Mechanical Joining of Various Materials by Clinching Method

    Article • Key Engineering Materials, September 2015, Trans Tech Publications

    PhD. Jacek JM MUCHA

  15. Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests

    Article • Strength of Materials, September 2015, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  16. Evaluation of Corrosion Resistance of Galvanized Steel Sheets Used in Automotive Production

    Article • Materials Science Forum, May 2015, Trans Tech Publications

    PhD. Jacek JM MUCHA

  17. The Structure of the Strength of Riveted Joints Determined in the Lap Joint Tensile Shear Test

    Article • Acta Mechanica et Automatica, January 2015, De Gruyter

    PhD. Jacek JM MUCHA

  18. The failure mechanics analysis of the solid self-piercing riveting joints

    Article • Engineering Failure Analysis, January 2015, Elsevier

    PhD. Jacek JM MUCHA

  19. The Experimental Analysis of Cold Pressed Joint Technology for Selected Sheet Metals Used in an Automotive Industry

    Article • Advanced Materials Research, December 2014, Trans Tech Publications

    PhD. Jacek JM MUCHA

  20. The clinching joints strength analysis in the aspects of changes in the forming technology and load conditions

    Article • Thin-Walled Structures, September 2014, Elsevier

    PhD. Jacek JM MUCHA

  21. The numerical analysis of the effect of the joining process parameters on self-piercing riveting using the solid rivet

    Article • Archives of Civil and Mechanical Engineering, May 2014, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  22. The effect of material properties and joining process parameters on behavior of self-pierce riveting joints made with the solid rivet

    Article • Materials & Design (1980-2015), December 2013, Elsevier

    PhD. Jacek JM MUCHA

  23. Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry

    Article • International Journal of Adhesion and Adhesives, September 2013, Elsevier

    PhD. Jacek JM MUCHA

  24. The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test

    Article • Thin-Walled Structures, May 2013, Elsevier

    PhD. Jacek JM MUCHA

  25. The Experimental Analysis of Forming and Strength of Clinch Riveting Sheet Metal Joint Made of Different Materials

    Article • Advances in Mechanical Engineering, January 2013, SAGE Publications

    PhD. Jacek JM MUCHA

  26. The analysis of lock forming mechanism in the clinching joint

    Article • Materials & Design (1980-2015), December 2011, Elsevier

    PhD. Jacek JM MUCHA

  27. A Study of Quality Parameters and Behaviour of Self-Piercing Riveted Aluminium Sheets with Different Joining Conditions

    Article • Strojniški vestnik – Journal of Mechanical Engineering, April 2011, Faculty of Mechanical Engineering

    PhD. Jacek JM MUCHA

  28. An experimental analysis of effects of various material tool’s wear on burr during generator sheets blanking

    Article • The International Journal of Advanced Manufacturing Technology, February 2010, Springer Science + Business Media

    PhD. Jacek JM MUCHA

  29. Finite element modeling and simulating of thermomechanic stress in thermocompression bondings

    Article • Materials & Design (1980-2015), April 2009, Elsevier

    PhD. Jacek JM MUCHA