All Stories

  1. Probabilistic Fracture Mechanics Simulation of Stress Corrosion Cracking Using Accelerated Laboratory Testing and Multi-Scale Modeling

    Article • CORROSION, July 2016, NACE International

    Prof. Richard P. Gangloff

  2. Crack Chemistry Control of Intergranular SCC in Sensitized Al-Mg

    Article • CORROSION, November 2015, NACE International

    Prof. Richard P. Gangloff, Rob Kelly

  3. Modeling Hydrogen Environment-Enhanced Fatigue Crack Growth in Al-Li-Cu-Zr

    Article • October 2013, Wiley

    Prof. Richard P. Gangloff

  4. Molybdate inhibition of corrosion fatigue crack propagation in precipitation hardened Al–Cu–Li

    Article • Corrosion Science, September 2012, Elsevier

    Prof. Richard P. Gangloff

  5. Effect of Environment on Fatigue Crack Wake Dislocation Structure in Al-Cu-Mg

    Article • Metallurgical and Materials Transactions A, February 2012, Springer Science + Business Media

    Prof. Richard P. Gangloff

  6. Gaseous hydrogen embrittlement of materials in energy technologies Volume 1

    Article • January 2012, Elsevier

    Prof. Richard P. Gangloff

  7. Gaseous hydrogen embrittlement of materials in energy technologies Volume 2

    Article • January 2012, Elsevier

    Prof. Richard P. Gangloff

  8. Scientific advances enabling next generation management of corrosion induced fatigue

    Article • Procedia Engineering, January 2011, Elsevier

    Prof. Richard P. Gangloff

  9. Effect of corrosion severity on fatigue evolution in Al–Zn–Mg–Cu

    Article • Corrosion Science, February 2010, Elsevier

    Prof. Richard P. Gangloff

  10. Molybdate inhibition of environmental fatigue crack propagation in Al–Zn–Mg–Cu

    Article • International Journal of Fatigue, November 2009, Elsevier

    Prof. Richard P. Gangloff

  11. Fatigue crack formation and growth from localized corrosion in Al–Zn–Mg–Cu

    Article • Engineering Fracture Mechanics, March 2009, Elsevier

    Prof. Richard P. Gangloff

  12. Environmental Fatigue-Crack Surface Crystallography for Al-Zn-Cu-Mg-Mn/Zr

    Article • Metallurgical and Materials Transactions A, April 2008, Springer Science + Business Media

    Prof. Richard P. Gangloff

  13. Critical issues in hydrogen assisted cracking of structural alloys

    Article • January 2008, Elsevier

    Prof. Richard P. Gangloff

  14. Crystallography of Fatigue Crack Propagation in Precipitation-Hardened Al-Cu-Mg/Li

    Article • Metallurgical and Materials Transactions A, November 2007, Springer Science + Business Media

    Prof. Richard P. Gangloff

  15. Environment-exposure-dependent fatigue crack growth kinetics for Al–Cu–Mg/Li

    Article • Materials Science and Engineering A, November 2007, Elsevier

    Prof. Richard P. Gangloff

  16. Ionic Inhibition of Environental Fatigue Crack Growth in 7075-T6

    Article • Key Engineering Materials, January 2007, Trans Tech Publications

    Prof. Richard P. Gangloff

  17. Internal hydrogen embrittlement of ultrahigh-strength AERMET 100 steel

    Article • Metallurgical and Materials Transactions A, February 2003, Springer Science + Business Media

    Prof. Richard P. Gangloff

  18. Effect of Temper on Environmental Fatigue Crack Propagation in 7000-Series Aluminum Alloys

    Article • Materials Science Forum, January 2000, Trans Tech Publications

    Prof. Richard P. Gangloff

  19. The Electrode Potential Dependence of Environment-Assisted Cracking of AA 7050

    Article • Materials Science Forum, January 2000, Trans Tech Publications

    Prof. Richard P. Gangloff

  20. Temperature-dependent void-sheet fracture in Al-Cu-Mg-Ag-Zr

    Article • Metallurgical and Materials Transactions A, June 1998, Springer Science + Business Media

    Prof. Richard P. Gangloff

  21. Elevated temperature fracture toughness of Al-Cu-Mg-Ag sheet: Characterization and modeling

    Article • Metallurgical and Materials Transactions A, September 1997, Springer Science + Business Media

    Prof. Richard P. Gangloff

  22. Localized deformation and elevated-temperature fracture of submicron-grain aluminum with dispersoids

    Article • Materials Science and Engineering A, November 1995, Elsevier

    Prof. Richard P. Gangloff

  23. Fracture toughness of an Al-Li-Cu-In alloy

    Article • Scripta Metallurgica et Materialia, June 1992, Elsevier

    Prof. Richard P. Gangloff

  24. Elevated temperature cracking of RSP aluminum alloy 8009: Characterization of the environmental influence

    Article • Scripta Metallurgica et Materialia, December 1991, Elsevier

    Prof. Richard P. Gangloff

  25. Time dependent crack growth in P/M AlFeVSi at elevated temperatures

    Article • Scripta Metallurgica et Materialia, April 1991, Elsevier

    Prof. Richard P. Gangloff

  26. Environment-induced cracking

    Article • JOM, February 1989, Springer Science + Business Media

    Prof. Richard P. Gangloff

  27. Intrinsic Fatigue Crack Propagation in Aluminum–Lithium Alloys: the Effect of Gaseous Environments

    Article • January 1989, Elsevier

    Prof. Richard P. Gangloff

  28. Crack tip modeling of hydrogen environement embrittlement: Application to fracture mechanics life prediction

    Article • Materials Science and Engineering A, August 1988, Elsevier

    Prof. Richard P. Gangloff

  29. Corrosion Fatigue of Metals: A Survey of Recent Advances and Issues

    Article • January 1987, Springer Science + Business Media

    Prof. Richard P. Gangloff

  30. Note sur un site à macrorestes végétaux tardiglaciaires au sud-ouest de Montréal, Québec

    Article • Géographie physique et Quaternaire, January 1985, Consortium Erudit

    Prof. Richard P. Gangloff

  31. Measurement and Modeling of Temperature Dependent Internal Hydrogen Assisted Cracking in Cr-Mo Steel

    Article • ASME International

    Prof. Richard P. Gangloff

  32. Dissolution and Hydrogen Diffusion Control of IGSCC in Sensitized Aluminum-Magnesium Alloys

    Article • ASME International

    Prof. Richard P. Gangloff