All Stories

  1. Rapid production of carbon steel slag based-structural clay product using dry mixing integrated with uniaxial compaction process

    Article • January 2022, American Institute of Physics

    Anasyida Abu Seman

  2. Effect of friction stir welding parameters on mechanical properties of as received and cryorolled Al 5083 alloy

    Article • January 2020, American Institute of Physics

    Anasyida Abu Seman, Taiwo Abioye

  3. Parametric optimization of friction stir welding of dissimilar Al 5083 and Al 6061 alloys by using Taguchi method

    Article • January 2020, American Institute of Physics

    Anasyida Abu Seman, Taiwo Abioye

  4. Wear Resistance of Pre-ECAP Annealing A356 Al Alloy with 1.5 Wt.% TiB2

    Article • Materials Science Forum, July 2019, Trans Tech Publications

    Anasyida Abu Seman, Muhammad Syukron, Zuhailawati Hussain

  5. Fabrication and characterization of hypoeutectic open-cell Al-Si foams using gravity die casting and squeeze casting

    Article • Metallurgical Research & Technology, January 2018, EDP Sciences

    Anasyida Abu Seman

  6. The Effect of Dipping Time of Liquid Nitrogen on Mechanical Properties of Al Alloy 5083 via Cryorolling

    Article • Materials Science Forum, March 2017, Trans Tech Publications

    Anasyida Abu Seman, Zuhailawati Hussain

  7. Chemical, Thermal and Phase Analysis of Malaysia’s Electric Arc Furnace (EAF) Slag Waste

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Anasyida Abu Seman

  8. The Role of Roller Speed on Solidification of Al-Mg-Si Alloy during Twin Roll Strip Casting

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Anasyida Abu Seman, Professor Brij Kumar Dhindaw, Zuhailawati Hussain

  9. ceramics (oxide & non-oxide) and biomaterials

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Anasyida Abu Seman, Assoc Prof Dr Hasmaliza MOHAMAD, Zuhailawati Hussain

  10. Microstructure Evolution of Conventional and Semi-Solid Cast of A356 Aluminium Alloy with Addition of Inoculant

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Anasyida Abu Seman, Zuhailawati Hussain

  11. Effect of Aluminium and Silicon to IMC Formation in Low Ag-SAC Solder

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Anasyida Abu Seman, Maslinda binti Kamarudin

  12. Effect of Complexing Agent in Ni-P Coating on Cu Substrate

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Anasyida Abu Seman, ek shiu

  13. Microstructure Evolution of Conventional and Semi-Solid A356 Alloy with Addition of Strontium

    Article • Advanced Materials Research, February 2015, Trans Tech Publications

    Anasyida Abu Seman, Zuhailawati Hussain

  14. Microstructural Study of Hypereutectic Al-15%Si Containing Ce

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Anasyida Abu Seman

  15. Ageing Characteristics of Equal Channel Angular Pressed Al-Mg-Si Alloy

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Anasyida Abu Seman

  16. Microstructural Study of Sn-3.0Ag0.5Cu Alloy on Cu/NiP-Coated Substrate by Addition of Fe, Sb and Ce

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Anasyida Abu Seman, Mahani Yusoff

  17. Wear behaviour of eutectic and hypoeutectic Al‐Si‐Mg‐Ce alloys

    Article • Industrial Lubrication and Tribology, March 2013, Emerald

    Anasyida Abu Seman

  18. Characterisation of Phases and Lattice Parameter in Eutectic and Hypoeutectic Al-Si-Mg-Ce Cast Alloy

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Anasyida Abu Seman

  19. The Influence of Temperature on the Oxide Layer Formation of Aluminized Carbon Steel

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Anasyida Abu Seman

  20. Material Characterization of Al-Si/SiCpp Composite via Pressureless Infiltration Using Polystyrene as External Binder

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Anasyida Abu Seman, Mahani Yusoff

  21. Friction Stir Welding of 6061-T6 Aluminum Alloy

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Anasyida Abu Seman

  22. Fabrication of low cost cutting wheel via thermal spray process

    Article • January 2012, American Institute of Physics

    Anasyida Abu Seman

  23. Dry sliding wear behaviour of Al–12Si–4Mg alloy with cerium addition

    Article • Materials & Design (1980-2015), January 2010, Elsevier

    Anasyida Abu Seman