All Stories

  1. The effect of micromechanical stresses on vacancy formation and stress-driven mass-transport in polycrystalline Fe–Au alloy
  2. Modeling the effect of grain boundary diffusivity and trapping on hydrogen transport using a phase-field compatible formulation
  3. Multi-interfacial bio-hybrid hydrogel engineering of Alg-Cys polymer coupled with Au nanoparticles as hierarchical excellent electrocatalyst for the detection of prostate cancer drug in human biological fluids
  4. Microcrack-assisted piezoelectric acoustic sensor based on f-MWCNTs/BaTiO3@PDMS nanocomposite and its self-powered voice recognition applications
  5. Detection of Single Ag–Cu2O Particle Collision and Catalysis Using Impact Electrochemistry
  6. Dysprosium tungstate incorporated on exfoliated layered molybdenum disulfide-based a flexible and wearable piezoelectric nanogenerator for the dual purpose of self-powered energy harvesting and a smart mask for human breath monitoring
  7. Deep eutectic solvents-mediated synthesis of barium stannate/halloysite nanotubes-based nanocomposite for electrochemical detection of hazardous 4-nitroaniline
  8. Development of boron nitride incorporated molybdenum disulfide nanocomposite as a simultaneous electrochemical transducer for environmentally hazardous ortho and para-nitroaniline isomers in aquatic environments
  9. Insight into the interaction of pluronic F‐127 functionalized boron nitride nanosheets with piezoelectric poly(l‐lactic acid) nanofiber scaffolds for bone tissue engineering applications
  10. Effect of Target Power on Microstructure, Tribological Performance and Biocompatibility of Magnetron Sputtered Amorphous Carbon Coatings
  11. Synergistic influence of surface‒modified SmxZn1-xCoO3‒poly(vinylidene fluoride) as a piezoelectric material for smart IoT applications
  12. A haptic knob based on the combination of shear mode and flow mode magnetorheological behaviors
  13. Investigation on Physico Chemical and X-ray Shielding Performance of Zinc Doped Nano-WO3 Epoxy Composite for Light Weight Lead Free Aprons
  14. Active-site-rich binary metal oxides integrated organic–inorganic hybrid nanocomposite: Electrochemical simultaneous detection of multi-drugs of isoprenaline and resorcinol in real samples
  15. Solvent-free fabrication of photothermal polypyrrole-coated sulfur particles for solar steam generation
  16. Lead-free bimetallic oxide loaded on reduced graphene oxide‒poly(dopamine) hybrid nanocomposite with enhanced crystallinity and piezoelectric performance
  17. N-substituted CQDs impregnated by Fe3O4 heterostructure: Bifunctional catalyst for electro-catalytic and photo-catalytic detection of an environmental hazardous organic pollutant
  18. Real-Time Sound Source Localization in Robots Using Fly Ormia Ochracea Inspired MEMS Directional Microphone
  19. Microcrack-Assisted Piezoelectric Acoustic Sensor Based on F-Mwcnts/Batio3@Pdms Nanocomposite and its Self-Powered Voice Recognition Applications
  20. Combination of polydopamine and carbon nanomaterials coating enhances the piezoelectric responses and cytocompatibility of biodegradable PLLA nanofiber scaffolds for tissue engineering applications
  21. Assessment of the Synergetic Performance of Nanostructured CeO2-SnO2/Al2O3 Mixed Oxides on Automobile Exhaust Control
  22. 3D walnut-like rare-earth gadolinium molybdate encapsulated with thermo-responsive hydrogel for sensitive electrochemical detection of anticancer drug Niftolide in human urine
  23. Synergistic Effect of Reinforced Multiwalled Carbon Nanotubes and Boron Nitride Nanosheet-Based Hybrid Piezoelectric PLLA Scaffold for Efficient Bone Tissue Regeneration
  24. An mm-sized biomimetic directional microphone array for sound source localization in three dimensions
  25. Microscale Devices for Biomimetic Sound Source Localization: A Review
  26. Bio-Inspired Microscale Three Dimensional Directional Sensing Microphone Array
  27. Grape Seed Extract Assisted Synthesis of Dual-Functional Anatase TiO2 Decorated Reduced Graphene Oxide Composite for Supercapacitor Electrode Material and Visible Light Photocatalytic Degradation of Bromophenol Blue Dye
  28. Effect of phenyl-isocyanate functionalized graphene oxide on the crystalline phases, mechanical and piezoelectric properties of electrospun PVDF nanofibers
  29. Two-dimensional clay nanosheet-reinforced polytetrafluoroethylene composites and their mechanical/tribological studies
  30. Coupled D33 Mode-Based High Performing Bio-Inspired Piezoelectric MEMS Directional Microphone
  31. Influence of oleylamine–functionalized boron nitride nanosheets on the crystalline phases, mechanical and piezoelectric properties of electrospun PVDF nanofibers
  32. Sound Source Localization in 2D Using a Pair of Bio–Inspired MEMS Directional Microphones
  33. AI speaker: a scope of utilizing sub–wavelength directional sensing of bio–inspired MEMS directional microphone
  34. Bio-inspired directional microphone for robotic hearing system
  35. A novel method for fabricating bioinspired layered nanocomposites using aligned graphene oxide/PVDF and their micromechanical modeling
  36. Design and characterization of a MEMS piezoelectric acoustic sensor with the enhanced signal-to-noise ratio
  37. Fabrication of Channel Circuit Electrodes and Flexible Graphene Resistive Sensors for Detecting Dinitrotoluene 2,4 (DNT)
  38. Sound source localization by Ormia ochracea inspired low–noise piezoelectric MEMS directional microphone
  39. Air bubbles induced piezophotocatalytic degradation of organic pollutants using nanofibrous poly(vinylidene fluoride)-titanium dioxide hybrid
  40. Direct preparation of β-crystalline poly(vinylidene fluoride) nanofibers by electrospinning and the use of non-polar silver nanoparticles coated poly(vinylidene fluoride) nanofibers as electrodes for piezoelectric sensor
  41. Effect of squeeze air film damping on diffraction grating based bio-inspired MEMS directional microphone
  42. Micromachined Piezoelectric Acoustic Sensor with Enhanced SNR for Audio Applications
  43. Effect of Torsional Beam Length on Acoustic Functionalities of Bio-Inspired Piezoelectric MEMS Directional Microphone
  44. Design of material removal rate to reduce machining time of dental crown
  45. RF magnetron sputtering mediated NiTi/Ag coating on Ti-alloy substrate with enhanced biocompatibility and durability
  46. Fly-Inspired MEMS Directional Acoustic Sensor for Sound Source Direction
  47. Micromechanics based FEM study on the mechanical properties and damage of epoxy reinforced with graphene based nanoplatelets
  48. Enhanced water oxidation catalytic performance of graphene oxide by gamma ray irradiation post-treatment
  49. Bioinspired low noise circular-shaped MEMS directional microphone
  50. Bio-Inspired Rectangular Shaped Piezoelectric MEMS Directional Microphone
  51. Graphene/polymer nanocomposites: The active role of the matrix in stiffening mechanics
  52. Graphene-Based Composite Protective Coating for Twisted Strings and Its Experimental Evaluation
  53. Fly <italic>Ormia Ochracea</italic> Inspired MEMS Directional Microphone: A Review
  54. Cryogenic fracture behavior of epoxy reinforced by a novel graphene oxide/poly(p-phenylenediamine) hybrid
  55. Analysis of graphene-encapsulated polymer microcapsules with superior thermal and storage stability behavior
  56. Effects of Changing the Amount of Oxidizing Agents on the Structural Properties of Graphene Oxide and its Dispersion Stability in an Aqueous Medium
  57. Analytical solution for squeeze film damping of MEMS perforated circular plates using Green’s function
  58. Squeeze film damping analysis of biomimetic micromachined microphone for sound source localization
  59. Analytical modeling of squeeze air film damping of biomimetic MEMS directional microphone
  60. Epoxy/p-phenylenediamine functionalized graphene oxide composites and evaluation of their fracture toughness and tensile properties
  61. Low Temperature Reduction of Graphene Oxide Using Hot-plate for Nanocomposites Applications
  62. Synthesis of graphene oxide-epoxy resin encapsulated microcapsules
  63. Design of Centrally Supported Biomimetic MEMS Microphone for Acoustic Source Localization
  64. A Parameter Study of Micromachined Seesaw Type Microphone
  65. Fabrication and Fracture Test of Functionalized Graphene-PETI 5 Composite
  66. Microcapsules Containing Solvent and Epoxy With Multi-Walled Carbon Nanotubes for Self-Healing
  67. Characterization of Micromachined Seesaw Type Microphone
  68. Carbon Fiber Reinforced Graphene Nanocomposite to Enhance Fracture Toughness for Cryogenic Application
  69. Flexible Graphene Sensors Using Channel Circuit Electrodes for Explosive Detection
  70. Functionalized graphene sheets-epoxy based nanocomposite for cryotank composite application
  71. Characterization of a micromachined vertically deformable varying-pitch grating for a spectrometer
  72. A laser interferometer encoder with two micromachined gratings generating phase-shifted quadrature
  73. Characterization of Gold Nanowire Through Beam Deflection Using Atomic Force Microscopy
  74. Flexible Graphene Sensors for Explosive Trace Detection
  75. Label-free detection of biomolecules using LED technology
  76. Thin film thickness variation measurement using dual LEDs and reflectometric interference spectroscopy model in biosensor
  77. An Optical Encoder Using Micromachined Two Gratings With Phase Difference
  78. High-speed AFM probe with micromachined membrane tip
  79. A micromachined scanning grating interferometer for the out-of-plane vibration measurement of MEMS
  80. A New Probe with Diffraction Based Displacement Sensing
  81. MEMS Scanning Diffraction Grating Spectrometer
  82. Actively controlled diffraction grating interferometer MEMS devices
  83. Scanning Grating Microinterferometer for MEMS Metrology
  84. Deformable diffraction grating for scanning microinterferometer arrays