All Stories

  1. Measurement and analysis of the non-symmetry of transverse magnetisation and resulting loss in grain-oriented steel using a modified RSST
  2. A Modified Inverse Vector Hysteresis Model for Nonoriented Electrical Steels Considering Anisotropy for FEA
  3. Computer-controlled electromagnetic control and image capture system for alignment of magnetic graphene nanofillers in epoxy composites
  4. Comparison between measured and computed magnetic flux density distribution of simulated transformer core joints assembled from grain-oriented and non-oriented electrical steel
  5. Development and application of measurement techniques for evaluating localised magnetic properties in electrical steel
  6. Use of failure-to-rescue to identify international variation in postoperative care in low-, middle- and high-income countries: a 7-day cohort study of elective surgery
  7. magnetostriction and noise in electrcial machines
  8. Localized Surface Vibration and Acoustic Noise Emitted From Laboratory-Scale Transformer Cores Assembled From Grain-Oriented Electrical Steel
  9. Experimental study on inter-laminar short-circuit faults at random positions in laminated magnetic cores
  10. Electroless Co–P-Carbon Nanotube composite coating to enhance magnetic properties of grain-oriented electrical steel
  11. CrAlN coating to enhance the power loss and magnetostriction in grain oriented electrical steel
  12. Power Loss Models in Punched Non-Oriented Electrical Steel Rings
  13. Electroless Plating: A Versatile Technique to Deposit Coatings on Electrical Steel
  14. Characterization of Grain-Oriented Electrical Steels Under High DC Biased Conditions
  15. Application of Co–Ni–P Coating on Grain-Oriented Electrical Steel
  16. Application of an advanced eddy-current loss modelling to magnetic properties of electrical steel laminations in a wide range of measurements
  17. Interlaminar Insulation Faults Detection and Quality Assessment of Magnetic Cores Using Flux Injection Probe
  18. An overview of the recent developments of the inter-laminar short circuit fault detection methods in magnetic cores
  19. Modeling 2-D Magnetostriction in Nonoriented Electrical Steels Using a Simple Magnetic Domain Model
  20. Approximation and Prediction of AC Magnetization Curves for Power Transformer Core Analysis
  21. Eddy Current Loss Estimation of Edge Burr-Affected Magnetic Laminations Based on Equivalent Electrical Network—Part II: Analytical Modeling and Experimental Results
  22. Eddy Current Loss Estimation of Edge Burr-Affected Magnetic Laminations Based on Equivalent Electrical Network—Part I: Fundamental Concepts and FEM Modeling
  23. Modeling of Magnetic Properties of GO Electrical Steel Based on Epstein Combination and Loss Data Weighted Processing
  24. Effects of strip thickness and silicon content on Magnetic Barkhausen Noise of non-oriented electrical steel at 50~Hz
  25. Effect of Artificial Burrs on Local Power Loss in a Three-Phase Transformer Core
  26. Influence of Cutting Techniques on Magnetostriction Under Stress of Grain Oriented Electrical Steel
  27. Study of the Effects of Surface Coating on Magnetic Barkhausen Noise in Grain-Oriented Electrical Steel
  28. Measurement and Modeling of 2-D Magnetostriction of Nonoriented Electrical Steel
  29. Equivalence of Measurements on Soft Magnetic Materials in the U.K. and Measurements for Operational Conditions
  30. Equivalence of measurements on soft magnetic materials in the UK and measurements for operational conditions
  31. Magnetostriction Anisotropy and Rotational Magnetostriction of a Nonoriented Electrical Steel
  32. Effect of Magnetostriction Anisotropy in Nonoriented Electrical Steels on Deformation of Induction Motor Stator Cores
  33. Mechanical Resonance in Nonoriented Electrical Steels Induced by Magnetostriction Under PWM Voltage Excitation
  34. Measurement of the stress sensitivity of magnetostriction in electrical steels under distorted waveform conditions
  35. Prediction of power loss and permeability with the use of an artificial neural network in wound toroidal cores
  36. A universal DC characterisation system for hard and soft magnetic materials
  37. Assessment of the Stress Sensitivity of Magnetostriction in Grain-Oriented Silicon Steel
  38. Measured and Computed Effect of Holes on Low-Frequency Magnetic Shielding Performance of Electrical Steel Sheet
  39. Measurement of resistivity of soft magnetic laminations at elevated temperatures
  40. Apparent permeability of electrical steel under PWM magnetisation
  41. Measured and computed effect of holes on low frequency magnetic shielding performance of electrical steel sheet
  42. Characterising electrical steels under complex magnetising conditions