All Stories

  1. Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825

    Article • Tribology International, October 2016, Elsevier

    Dr Soumya Gangopadhyay

  2. Effect of impregnated powder materials on surface integrity aspects of Inconel 625 during electrical discharge machining

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, September 2016, SAGE Publications

    Dr Soumya Gangopadhyay

  3. Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool

    Article • Journal of Cleaner Production, August 2016, Elsevier

    Dr Soumya Gangopadhyay

  4. Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825

    Article • Tribology Transactions, July 2016, Taylor & Francis

    Dr Soumya Gangopadhyay

  5. Comparative evaluation of machinability characteristics of Nimonic C-263 using CVD and PVD coated tools

    Article • Measurement, May 2016, Elsevier

    Dr Soumya Gangopadhyay

  6. Modelling, simulation and experimental investigation for generating ‘I’ shaped contour on Inconel 825 using electro chemical machining

    Article • Journal of Manufacturing Processes, May 2016, Elsevier

    Dr Soumya Gangopadhyay

  7. State of the art in powder-mixed electric discharge machining: A review

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, March 2016, SAGE Publications

    Dr Soumya Gangopadhyay

  8. Combinatorial synthesis of Cr1 − xAlxN and Ta1 − xAlxN coatings using industrial scale co-sputtering

    Article • Surface Engineering, February 2016, Maney Publishing

    Dr Soumya Gangopadhyay

  9. Application of Analytical Simulation on Various Characteristics of Hole Quality during Micro-Drilling of Printed Circuit Board

    Article • Materials and Manufacturing Processes, January 2016, Taylor & Francis

    Dr Soumya Gangopadhyay

  10. Micro-Hardness Study on AISI P20 Steel Using Taguchi Method

    Article • Advanced Materials Research, January 2016, Trans Tech Publications

    Dr Soumya Gangopadhyay, Ms. Ritanjali Sethy

  11. State-of-the-art in surface integrity in machining of nickel-based super alloys

    Article • International Journal of Machine Tools and Manufacture, January 2016, Elsevier

    Dr Soumya Gangopadhyay

  12. Multi-response optimization of surface integrity characteristics of EDM process using grey-fuzzy logic-based hybrid approach

    Article • Engineering Science and Technology an International Journal, September 2015, Elsevier

    Dr Soumya Gangopadhyay

  13. Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite

    Article • Engineering Science and Technology an International Journal, September 2015, Elsevier

    Dr Soumya Gangopadhyay

  14. On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel

    Article • Materials and Manufacturing Processes, July 2015, Taylor & Francis

    Dr Soumya Gangopadhyay

  15. Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis

    Article • Measurement, March 2015, Elsevier

    Dr Soumya Gangopadhyay

  16. Microstructural investigation and multi response optimisation using Fuzzy-TOPSIS during the electrochemical machining of Inconel 825

    Article • International Journal of Precision Technology, January 2015, Inderscience Publishers

    Dr Soumya Gangopadhyay

  17. Thermal Energy Distribution and Optimization of Process Parameters during Electrical Discharge Machining Of AISI D2 Steel

    Article • Materials Today Proceedings, January 2015, Elsevier

    Dr Soumya Gangopadhyay

  18. Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning

    Article • Materials and Manufacturing Processes, November 2014, Taylor & Francis

    Dr Soumya Gangopadhyay

  19. Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts

    Article • Applied Surface Science, November 2014, Elsevier

    Dr Soumya Gangopadhyay

  20. Influence of Different Tool Electrode Materials on EDMed Surface Integrity of AISI P20 Tool Steel

    Article • Materials and Manufacturing Processes, October 2014, Taylor & Francis

    Dr Soumya Gangopadhyay

  21. Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825

    Article • Surface Engineering, May 2014, Taylor & Francis

    Dr Soumya Gangopadhyay

  22. Experimental Investigation and Analysis of EDM Characteristics of Inconel 825

    Article • Materials and Manufacturing Processes, April 2014, Taylor & Francis

    Dr Soumya Gangopadhyay

  23. Multi Response Optimization of Powder Mixed Electric Discharge Machining of Aluminum/Alumina Metal Matrix Composite Using Grey Relation Analysis

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  24. Optimization of the Surface Integrity Characteristics of EDM Process Using PCA based Grey Relation Investigation

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  25. Multi-objective Optimization of Machining Parameters During Dry Turning of AISI 304 Austenitic Stainless Steel Using Grey Relational Analysis

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  26. Tool Wear and Chip Characteristics during Dry Turning of Inconel 825

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  27. Prediction of Work Hardening during Machining Inconel 825 Using Fuzzy Logic Method

    Article • Procedia Materials Science, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  28. Effect of Cutting Speed and Tool Coating on Machined Surface Integrity of Ni-based Super Alloy

    Article • Procedia CIRP, January 2014, Elsevier

    Dr Soumya Gangopadhyay

  29. Effect of Coating Thickness on the Characteristics and Dry Machining Performance of TiN Film Deposited on Cemented Carbide Inserts Using CFUBMS

    Article • Materials and Manufacturing Processes, August 2011, Taylor & Francis

    Dr Soumya Gangopadhyay

  30. Erratum to “Effect of target frequency, bias voltage and bias frequency on microstructure and mechanical properties of pulsed DC CFUBM sputtered TiN coating” [Surface & Coatings Technology Volume 204 (2010) p. 3674–3697]

    Article • Surface and Coatings Technology, September 2010, Elsevier

    Dr Soumya Gangopadhyay

  31. EFFECT OF CUTTING SPEED AND SURFACE CHEMISTRY OF CUTTING TOOLS ON THE FORMATION OF BUL OR BUE AND SURFACE QUALITY OF THE GENERATED SURFACE IN DRY TURNING OF AA6005 ALUMINIUM ALLOY

    Article • Machining Science and Technology, August 2010, Taylor & Francis

    Dr Soumya Gangopadhyay

  32. Effect of target frequency, bias voltage and bias frequency on microstructure and mechanical properties of pulsed DC CFUBM sputtered TiN coating

    Article • Surface and Coatings Technology, August 2010, Elsevier

    Dr Soumya Gangopadhyay

  33. Effect of substrate bias voltage on structural and mechanical properties of pulsed DC magnetron sputtered TiN–MoSx composite coatings

    Article • Vacuum, February 2010, Elsevier

    Dr Soumya Gangopadhyay

  34. On deposition and characterisation of MoS x -Ti multilayer coating and performance evaluation in dry turning of aluminium alloy and steel

    Article • January 2010, Springer Science + Business Media

    Dr Soumya Gangopadhyay

  35. Effects of Deposition Conditions and Counter Bodies on the Tribological Properties of Pulsed DC Magnetron Sputtered TiN–MoS x Composite Coating

    Article • Tribology Letters, November 2009, Springer Science + Business Media

    Dr Soumya Gangopadhyay

  36. Pulsed DC magnetron sputtered MoSx–TiN composite coating for improved mechanical properties and tribological performance

    Article • Surface and Coatings Technology, July 2009, Elsevier

    Dr Soumya Gangopadhyay

  37. Composition and structure–property relationship of low friction, wear resistant TiN–MoSx composite coating deposited by pulsed closed-field unbalanced magnetron sputtering

    Article • Surface and Coatings Technology, March 2009, Elsevier

    Dr Soumya Gangopadhyay

  38. Modelling and analysis of EDMED job surface integrity

    Article • Journal of Materials Processing Technology, July 2007, Elsevier

    Dr Soumya Gangopadhyay