All Stories

  1. Performance of Cement–Fly Ash Masonry Mortar with Sand from Mine Overburden as an Environment-Friendly Alternative to Conventional Fine Aggregate
  2. Effect of mode of delivery and background noise on speech characteristics of talkers in a classroom environment
  3. Assessment of CO2-based demand controlled ventilation requirement for a flexible work environment with ductless split air-conditioners
  4. Surface modified microcrystalline cellulose from cotton as a potential mineral admixture in cement mortar composite
  5. Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete
  6. Design of an anidolic concentrator and evaluation of daylight enhancement under an overcast sky
  7. Sodium salt admixtures for enhancing the foaming characteristics of sodium lauryl sulphate
  8. Daylight enhancement using laser cut panels integrated with a profiled Fresnel collector
  9. Identification of admixture for pelletization and strength enhancement of sintered coal pond ash aggregate through statistically designed experiments
  10. Conceptual design and assessment of a profiled Fresnel lens daylight collector
  11. Identification of design parameters influencing manufacture and properties of cold-bonded pond ash aggregate
  12. Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature
  13. Classification of indoor daylight enhancement systems
  14. Identification of set-accelerator for enhancing the productivity of foam concrete block manufacture
  15. Behaviour of foam concrete under sulphate environments
  16. Physical characteristics of sintered fly ash aggregate containing clay binders
  17. Autogenous Curing of Cold-Bonded Fly-Ash-Aggregate Concrete
  18. Properties of sintered low calcium bottom ash aggregate with clay binders
  19. Environmental friendly technology of cold-bonded bottom ash aggregate manufacture through chemical activation
  20. Reuse potential of low-calcium bottom ash as aggregate through pelletization
  21. Relative assessment of density and stability of foam produced with four synthetic surfactants
  22. Shrinkage Behavior of Foam Concrete
  23. Swelling Characteristic of Bentonite on Pelletization and Properties of Fly Ash Aggregates
  24. A classification of studies on properties of foam concrete
  25. Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete
  26. Influence of parent concrete on the properties of recycled aggregate concrete
  27. Effect of curing method on characteristics of cold bonded fly ash aggregates
  28. Workability and strength behaviour of concrete with cold-bonded fly ash aggregate
  29. Fresh State Characteristics of Foam Concrete
  30. Sorption characteristics of foam concrete
  31. Influence of fineness of fly ash on the aggregate pelletization process
  32. KB-GA-Based Hybrid System for Layout Planning of Multistory Buildings
  33. Models for strength prediction of foam concrete
  34. Air‐void characterisation of foam concrete
  35. Models relating mixture composition to the density and strength of foam concrete using response surface methodology
  36. Influence of filler type on the properties of foam concrete
  37. Influence of binders on properties of sintered fly ash aggregate
  38. Influence of pelletization process on the properties of fly ash aggregates
  39. Water permeability assessment of alternative masonry systems
  40. Laboratory-Based Productivity Study on Alternative Masonry Systems
  41. Relative moisture movement through recycled aggregate concrete
  42. Behaviour of concrete with low-strength bricks as lightweight coarse aggregate
  43. Influence of Construction Method on Water Permeation of Interlocking Block Masonry
  44. Reply to the discussion by H. Vaupel and I. Odler of the paper “Microstructural investigations on aerated concrete”
  45. Structure and properties of aerated concrete: a review
  46. Microstructural investigations on aerated concrete
  47. Behavior of Concrete Hollow‐Block Masonry Prisms under Axial Compression