All Stories

  1. Analytical Modeling of the Bond Behavior between ‎Textile ‎and Mortar Based on Pull-Out ‎Tests

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Dr Bahman Ghiassi

  2. Bond behavior degradation between FRP and masonry under aggressive environmental conditions

    Article • Mechanics of Advanced Materials and Structures, December 2018, Taylor & Francis

    Paulo Lourenco, Dr Bahman Ghiassi, Rafael Ramirez

  3. Fiber-to-mortar bond behavior in TRM composites: Effect of embedded length and fiber configuration

    Article • Composites Part B Engineering, November 2018, Elsevier

    Dr Bahman Ghiassi

  4. Bond behavior in NSM-strengthened masonry

    Article • Engineering Structures, July 2018, Elsevier

    Dr Bahman Ghiassi

  5. Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: Experimental and analytical modeling

    Article • Composites Part B Engineering, June 2018, Elsevier

    Dr Bahman Ghiassi

  6. Micromechanical modeling of tension stiffening in FRP-strengthened concrete elements

    Article • Journal of Composite Materials, January 2018, SAGE Publications

    Dr Bahman Ghiassi

  7. Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems

    Article • Composites Part B Engineering, October 2017, Elsevier

    Dr Bahman Ghiassi

  8. A Comparative Study on Deflection-Hardening Behavior of Ductile Alkali-Activated Composite

    Article • September 2017, Springer Science + Business Media

    Dr Bahman Ghiassi

  9. Simple Numerical Homogenization Model for FRCM Reinforced Masonry Panels Subjected to Out-of-Plane Loads

    Article • Key Engineering Materials, July 2017, Trans Tech Publications

    Dr Bahman Ghiassi

  10. Modelling of the In-Plane and Out-of-Plane Performance of TRM-Strengthened Masonry Walls

    Article • Key Engineering Materials, July 2017, Trans Tech Publications

    Dr Bahman Ghiassi

  11. Modelling the nonlinear behaviour of masonry walls strengthened with textile reinforced mortars

    Article • Engineering Structures, March 2017, Elsevier

    Dr Bahman Ghiassi

  12. Effect of synergistic environmental conditions on thermal properties of a cold curing epoxy resin

    Article • Composites Part B Engineering, January 2017, Elsevier

    Dr Bahman Ghiassi

  13. Multi-level characterization of steel reinforced mortars for strengthening of masonry structures

    Article • Materials & Design, August 2016, Elsevier

    Dr Bahman Ghiassi

  14. Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parameters

    Article • Composites Part A Applied Science and Manufacturing, August 2016, Elsevier

    Dr Bahman Ghiassi

  15. FRP–brick masonry bond degradation under hygrothermal conditions

    Article • Composite Structures, July 2016, Elsevier

    Dr Bahman Ghiassi

  16. Development and characterization of novel auxetic structures based on re-entrant hexagon design produced from braided composites

    Article • Composites Part B Engineering, May 2016, Elsevier

    Dr Bahman Ghiassi

  17. Moisture-induced degradation of interfacial bond in FRP-strengthened masonry

    Article • Composites Part B Engineering, February 2016, Elsevier

    Dr Bahman Ghiassi

  18. Effect of Environmental Aging on the Numerical Response of FRP-Strengthened Masonry Walls

    Article • Journal of Structural Engineering, January 2016, American Society of Civil Engineers (ASCE)

    Dr Bahman Ghiassi

  19. Tensile and Bond Characterization of Natural Fibers Embeeded in Inorganic Matrices

    Article • January 2016, Springer Science + Business Media

    Dr Bahman Ghiassi

  20. Structural assessment of a masonry vault in Portugal

    Article • Proceedings of the Institution of Civil Engineers - Structures and Buildings, December 2015, ICE Publishing

    Dr Bahman Ghiassi

  21. Debonding damage analysis in composite-masonry strengthening systems with polymer- and mortar-based matrix by means of the acoustic emission technique

    Article • Smart Materials and Structures, November 2015, Institute of Physics Publishing

    Dr Bahman Ghiassi

  22. Repair of composite-to-masonry bond using flexible matrix

    Article • Matériaux et Constructions, July 2015, Springer Science + Business Media

    Dr Bahman Ghiassi

  23. Accelerated Hygrothermal Aging of Bond in FRP–Masonry Systems

    Article • Journal of Composites for Construction, June 2015, American Society of Civil Engineers (ASCE)

    Dr Bahman Ghiassi

  24. Evaluation of the bond performance in FRP–brick components re-bonded after initial delamination

    Article • Composite Structures, May 2015, Elsevier

    Dr Bahman Ghiassi

  25. Application of Acoustic Emission Technique for Bond Characterization in FRP-Masonry Systems

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Dr Bahman Ghiassi, Paulo Lourenco

  26. Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling

    Article • Construction and Building Materials, August 2014, Elsevier

    Dr Bahman Ghiassi

  27. Hygrothermal durability of bond in FRP-strengthened masonry

    Article • Matériaux et Constructions, July 2014, Springer Science + Business Media

    Dr Bahman Ghiassi

  28. Mortar-based systems for externally bonded strengthening of masonry

    Article • Matériaux et Constructions, June 2014, Springer Science + Business Media

    Dr Bahman Ghiassi, Prof Paolacci Fabrizio

  29. Characterization of debonding in FRP-strengthened masonry using the acoustic emission technique

    Article • Engineering Structures, May 2014, Elsevier

    Dr Bahman Ghiassi

  30. FRP-to-Masonry Bond Durability Assessment with Infrared Thermography Method

    Article • Journal of Nondestructive Evaluation, March 2014, Springer Science + Business Media

    Dr Bahman Ghiassi

  31. Application of digital image correlation in investigating the bond between FRP and masonry

    Article • Composite Structures, December 2013, Elsevier

    Dr Bahman Ghiassi

  32. Water degrading effects on the bond behavior in FRP-strengthened masonry

    Article • Composites Part B Engineering, November 2013, Elsevier

    Dr Bahman Ghiassi

  33. Local stress field approach for post cracking analysis of FRP strengthened RC elements

    Article • Composites Part B Engineering, October 2013, Elsevier

    Dr Bahman Ghiassi

  34. Numerical study of the role of mortar joints in the bond behavior of FRP-strengthened masonry

    Article • Composites Part B Engineering, March 2013, Elsevier

    Dr Bahman Ghiassi

  35. Numerical analysis of bond behavior between masonry bricks and composite materials

    Article • Engineering Structures, October 2012, Elsevier

    Dr Bahman Ghiassi

  36. A simplified model for analysis of unreinforced masonry shear walls under combined axial, shear and flexural loading

    Article • Engineering Structures, September 2012, Elsevier

    Dr Bahman Ghiassi

  37. Seismic Evaluation of Masonry Structures Strengthened with Reinforced Concrete Layers

    Article • Journal of Structural Engineering, June 2012, American Society of Civil Engineers (ASCE)

    Dr Bahman Ghiassi

  38. New generation of shear design formulas for RC members

    Article • Journal of Advanced Concrete Technology, January 2010, Japan Concrete Institute

    Dr Bahman Ghiassi