All Stories

  1. Publisher's Note: “Birefringent optical retarders from laser 3D-printed dielectric metasurfaces” [Appl. Phys Lett. 118, 151104 (2021)]

    Article • Applied Physics Letters, May 2021, American Institute of Physics

    Dr Mangirdas Malinauskas

  2. Birefringent optical retarders from laser 3D-printed dielectric metasurfaces

    Article • Applied Physics Letters, April 2021, American Institute of Physics

    Dr Mangirdas Malinauskas

  3. Polymerization mechanisms initiated by spatio-temporally confined light

    Article • Nanophotonics, January 2021, De Gruyter

    Tommaso Baldacchini, Dr Jolita Ostrauskaite, Professor Saulius Juodkazis, Dr Mangirdas Malinauskas

  4. Mesoscale Laser 3D Printing

    Article • October 2018, MDPI AG

    Dr Mangirdas Malinauskas

  5. Additive-Manufacturing of 3D Glass-Ceramics down to Nanoscale Resolution

    Article • September 2018, MDPI AG

    Dr Mangirdas Malinauskas

  6. Multiscale optical 3D printing: a Review

    Article • Journal of Optics, April 2018, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  7. 3D printed polarizing grids for IR-THz synchrotron radiation

    Article • Journal of Optics, January 2018, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  8. Hybrid Subtractive-Additive-Welding Microfabrication for Lab-on-Chip (LOC) Applications via Single Amplified Femtosecond Laser Source

    Article • April 2017, MDPI AG

    Dr Mangirdas Malinauskas

  9. Enhanced cavity-waveguide interaction in three-dimensional photonic crystals

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  10. Microactuation and sensing using reversible deformations of laser-written polymeric structures

    Article • Nanotechnology, February 2017, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  11. Bioresists from renewable resources as sustainable photoresins for 3D laser microlithography: material synthesis, cross-linking rate and characterization of the structures

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  12. Laser nanolithography and pyrolysis of SZ2080 hybrid for slowing light in 3D photonic crystals

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  13. Laser subtractive-additive-welding microfabrication for Lab-On-Chip (LOC) applications

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  14. Nanostructures for highly efficient infrared detection

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  15. Plasmonically enhanced 3D laser lithography for high-throughput nanoprecision fabrication

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  16. Fabrication of 3D micro-structured scaffolds by direct laser writing in pre-polymers for in vitro and in vivo studies

    Article • February 2017, SPIE

    Dr Mangirdas Malinauskas

  17. Does orthodontic debonding lead to tooth sensitivity? Comparison of teeth with and without visible enamel microcracks

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, February 2017, Elsevier

    Dr Mangirdas Malinauskas

  18. Optically Clear and Resilient Free-Form µ-Optics 3D-Printed via Ultrafast Laser Lithography

    Article • Materials, January 2017, MDPI AG

    Dr Mangirdas Malinauskas

  19. Enamel microcracks in terms of orthodontic treatment: A novel method for their detection and evaluation

    Article • Dental Materials Journal, January 2017, Japanese Society for Dental Materials and Devices

    Dr Mangirdas Malinauskas

  20. Optically Clear and Resilient Free-Form µ-Optics 3D-Printed via Ultrafast Laser Lithography

    Article • November 2016, MDPI AG

    Dr Mangirdas Malinauskas

  21. Characterization of tissue engineered cartilage products: Recent developments in advanced therapy

    Article • Pharmacological Research, November 2016, Elsevier

    Dr Mangirdas Malinauskas

  22. Comparison of different microstructure scaffolds for tissue regeneration

    Article • October 2016, Vilnius Gediminas Technical University

    Dr Mangirdas Malinauskas

  23. Wrinkled axicons: shaping light from cusps

    Article • Optics Express, October 2016, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  24. Rapid Laser Optical Printing in 3D at a Nanoscale

    Article • September 2016, Wiley

    Dr Mangirdas Malinauskas

  25. Hybrid curved nano-structured micro-optical elements

    Article • Optics Express, July 2016, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  26. Nanoscale Precision of 3D Polymerization via Polarization Control

    Article • Advanced Optical Materials, May 2016, Wiley

    Dr Mangirdas Malinauskas

  27. The prognostic value of visually assessing enamel microcracks:Do debonding and adhesive removal contribute to their increase?

    Article • The Angle Orthodontist, May 2016, The Angle Orthodontist (EH Angle Education & Research Foundation)

    Dr Mangirdas Malinauskas

  28. Ultrafast laser processing of materials: from science to industry

    Article • Light Science & Applications, March 2016, Nature

    Dr Mangirdas Malinauskas

  29. Femtosecond pulsed light polarization induced effects in direct laser writing 3D nanolithography

    Article • March 2016, SPIE

    Dr Mangirdas Malinauskas

  30. Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers

    Article • Nanotechnology, February 2016, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  31. Fabrication of a composite of nanocrystalline carbonated hydroxyapatite (cHAP) with polylactic acid (PLA) and its surface topographical structuring with direct laser writing (DLW)

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Mangirdas Malinauskas

  32. Correction: Fabrication of a composite of nanocrystalline carbonated hydroxyapatite (cHAP) with polylactic acid (PLA) and its surface topographical structuring with direct laser writing (DLW)

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Mangirdas Malinauskas

  33. 3D Micro-Optics Via Ultrafast Laser Writing: Miniaturization, Integration, and Multifunctionalities

    Article • January 2016, Elsevier

    Dr Mangirdas Malinauskas

  34. Tuning the refractive index in 3D direct laser writing lithography: towards GRIN microoptics

    Article • Laser & Photonics Review, October 2015, Wiley

    Dr Mangirdas Malinauskas

  35. Tailoring bulk mechanical properties of 3D printed objects of polylactic acid varying internal micro-architecture

    Article • May 2015, SPIE

    Dr Mangirdas Malinauskas

  36. Femtosecond Pulse Light Filament-Assisted Microfabrication of Biodegradable Polylactic Acid (PLA) Material

    Article • Journal of Laser Micro/Nanoengineering, May 2015, Japan Laser Processing Society

    Dr Mangirdas Malinauskas

  37. Assessment of human gingival fibroblast interaction with dental implant abutment materials

    Article • Journal of Materials Science Materials in Medicine, March 2015, Springer Science + Business Media

    Dr Mangirdas Malinauskas

  38. Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography

    Article • Biofabrication, March 2015, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  39. 3D micro-optical elements for generation of tightly focused vortex beams

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Dr Mangirdas Malinauskas

  40. Effect of the photoinitiator presence and exposure conditions on laser-induced damage threshold of ORMOSIL (SZ2080)

    Article • Optical Materials, January 2015, Elsevier

    Dr Mangirdas Malinauskas

  41. Enamel cracks evaluation —A method to predict tooth surface damage during the debonding

    Article • Dental Materials Journal, January 2015, Japanese Society for Dental Materials and Devices

    Dr Mangirdas Malinauskas

  42. Augmentation of direct laser writing fabrication throughput for three-dimensional structures by varying focusing conditions

    Article • Optical Engineering, December 2014, SPIE

    Dr Mangirdas Malinauskas

  43. Beam focalization in reflection from flat dielectric subwavelength gratings

    Article • Optics Letters, October 2014, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  44. 3D printing enhanced by direct laser writing for tissue engineering applications

    Article • Micromachines, September 2014, MDPI AG

    Dr Mangirdas Malinauskas

  45. Employment of fluorescence for autofocusing in direct laser writing micro-/nano-lithography

    Article • September 2014, SPIE

    Dr Mangirdas Malinauskas

  46. Angiotensin IV induced contractions in human jejunal wall musculature in vitro

    Article • Peptides, September 2014, Elsevier

    Dr Mangirdas Malinauskas

  47. Characterization of photopolymers used in laser 3D micro/nanolithography by means of laser-induced damage threshold (LIDT)

    Article • Optical Materials Express, July 2014, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  48. Mesoscale 3D manufacturing: varying focusing conditions for efficient direct laser writing of polymers

    Article • May 2014, SPIE

    Dr Mangirdas Malinauskas

  49. Laser-induced damage in photopolymers thin films with ultrashort pulses

    Article • May 2014, SPIE

    Dr Mangirdas Malinauskas

  50. Multiscale 3D manufacturing: combining thermal extrusion printing with additive and subtractive direct laser writing

    Article • May 2014, SPIE

    Dr Mangirdas Malinauskas

  51. Combination of thermal extrusion printing and ultrafast laser fabrication for the manufacturing of 3D composite scaffolds

    Article • March 2014, SPIE

    Dr Mangirdas Malinauskas

  52. Three-dimensional nanostructuring of polymer materials by controlled avalanche using femtosecond laser pulses

    Article • March 2014, SPIE

    Dr Mangirdas Malinauskas

  53. Laser nanolithography and chemical metalization for the manufacturing of 3D metallic interconnects

    Article • March 2014, SPIE

    Dr Mangirdas Malinauskas

  54. Direct Laser Fabrication of Composite Material 3D Microstructured Scaffolds

    Article • Journal of Laser Micro/Nanoengineering, March 2014, Japan Laser Processing Society

    Dr Mangirdas Malinauskas

  55. Improvement of the Fabrication Accuracy of Fiber Tip Microoptical Components via Mode Field Expansion

    Article • Journal of Laser Micro/Nanoengineering, March 2014, Japan Laser Processing Society

    Dr Mangirdas Malinauskas

  56. Spatial filtering by axisymmetric photonic microstructures

    Article • Optics Letters, February 2014, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  57. Direct laser writing of microstructures on optically opaque and reflective surfaces

    Article • Optics and Lasers in Engineering, February 2014, Elsevier

    Dr Mangirdas Malinauskas

  58. A Decade of Advances in Femtosecond Laser Fabrication of Polymers: Mechanisms and Applications

    Article • January 2014, Springer Science + Business Media

    Dr Mangirdas Malinauskas

  59. Optoplasmonics: hybridization in 3D

    Article • December 2013, SPIE

    Dr Mangirdas Malinauskas

  60. Optical and thermal characterization on micro-optical elements made by femtosecond laser writing

    Article • December 2013, SPIE

    Dr Mangirdas Malinauskas

  61. Ultrafast laser nanostructuring of photopolymers: A decade of advances

    Article • Physics Reports, December 2013, Elsevier

    Dr Mangirdas Malinauskas

  62. Monolithic generators of pseudo-nondiffracting optical vortex beams at the microscale

    Article • Applied Physics Letters, October 2013, American Institute of Physics

    Dr Mangirdas Malinauskas

  63. Nano-groove and 3D fabrication by controlled avalanche using femtosecond laser pulses

    Article • Optical Materials Express, September 2013, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  64. Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds

    Article • Optics Express, July 2013, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  65. Flat lensing in the visible frequency range by woodpile photonic crystals

    Article • Optics Letters, July 2013, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  66. Focusing by a flat woodpile 3D photonic crystal

    Article • June 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  67. Laser 3D nanostructuring of polymers: Mechanisms study and targeted applications

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  68. Chirped Photonic Crystals for spatial filtering of light beams

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  69. Direct laser fabrication of composite material 3D microstructured scaffolds

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  70. Focussing by a flat woodpile 3D photonic crystal

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  71. Direct laser writing of 3D polymer micro/nanostructures on metallic surfaces

    Article • Applied Surface Science, April 2013, Elsevier

    Dr Mangirdas Malinauskas

  72. Black silicon: substrate for laser 3D micro/nano-polymerization

    Article • Optics Express, March 2013, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  73. Spatial filtering by chirped photonic crystals

    Article • Physical Review A, March 2013, American Physical Society (APS)

    Dr Mangirdas Malinauskas

  74. Fabrication, replication, and characterization of microlenses for optofluidic applications

    Article • March 2013, SPIE

    Dr Mangirdas Malinauskas

  75. Laser 3D micro/nanofabrication of polymers for tissue engineering applications

    Article • Optics & Laser Technology, February 2013, Elsevier

    Dr Mangirdas Malinauskas

  76. Fabrication of periodic micro-structures by holographic lithography

    Article • Lithuanian Journal of Physics, January 2013, Lithuanian Academy of Sciences

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  77. Fabrication of periodic micro-structures by holographic lithography

    Article • Lithuanian Journal of Physics, January 2013, Lithuanian Academy of Sciences

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  78. 3D microoptical elements formed in a photostructurable germanium silicate by direct laser writing

    Article • Optics and Lasers in Engineering, December 2012, Elsevier

    Dr Mangirdas Malinauskas

  79. Closely packed hexagonal conical microlens array fabricated by direct laser photopolymerization

    Article • Applied Optics, July 2012, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  80. Collimation and imaging behind a woodpile photonic crystal

    Article • July 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  81. Direct Laser Fabrication of Polymeric Implants for Cardiovascular Surgery

    Article • Materials Science, June 2012, Publishing House Technologija

    Dr Mangirdas Malinauskas

  82. Holographic lithography for biomedical applications

    Article • June 2012, SPIE

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  83. Woodpile photonic crystal for beam collimation

    Article • June 2012, SPIE

    Dr Mangirdas Malinauskas

  84. Single-step direct laser fabrication of complex shaped microoptical components

    Article • June 2012, SPIE

    Dr Mangirdas Malinauskas

  85. Lithographic microfabrication of biocompatible polymers for tissue engineering and lab-on-a-chip applications

    Article • June 2012, SPIE

    Dr Mangirdas Malinauskas

  86. Direct laser writing of 3D micro/nanostructures on opaque surfaces

    Article • June 2012, SPIE

    Dr Mangirdas Malinauskas

  87. Fabrication of micro-tube arrays in photopolymer SZ2080 by using three different methods of a direct laser polymerization technique

    Article • Journal of Micromechanics and Microengineering, May 2012, Institute of Physics Publishing

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  88. In vitro and in vivo biocompatibility study on laser 3D microstructurable polymers

    Article • Applied Physics A, May 2012, Springer Science + Business Media

    Dr Mangirdas Malinauskas

  89. Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering

    Article • Journal of Biomedical Optics, May 2012, SPIE

    Dr Mangirdas Malinauskas

  90. Laser fabrication of various polymer microoptical components

    Article • The European Physical Journal Applied Physics, May 2012, EDP Sciences

    Dr Mangirdas Malinauskas

  91. Thermal and optical properties of sol-gel and SU-8 resists

    Article • February 2012, SPIE

    Dr Mangirdas Malinauskas

  92. Nanophotonic lithography: a versatile tool for manufacturing functional three-dimensional micro-/nano-objects

    Article • Lithuanian Journal of Physics, January 2012, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  93. Applications of nonlinear laser nano/microlithography: fabrication from nanophotonic to biomedical components

    Article • December 2011, SPIE

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  94. Evaluation of enamel micro-cracks characteristics after removal of metal brackets in adult patients

    Article • European Journal of Orthodontics, November 2011, Oxford University Press (OUP)

    Dr Mangirdas Malinauskas

  95. Fabrication of Periodic Micro-Structures by Multi-Photon Polymerization Using the Femtosecond Laser and Four-Beam Interference

    Article • Materials Science, September 2011, Publishing House Technologija

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  96. Formation of collimated beams behind the woodpile photonic crystal

    Article • Physical Review A, September 2011, American Physical Society (APS)

    Dr Mangirdas Malinauskas

  97. Fine structuring of integrated micro-optical components using lasers

    Article • SPIE Newsroom, July 2011, SPIE

    Dr Mangirdas Malinauskas

  98. Direct laser writing of microoptical structures using a Ge-containing hybrid material

    Article • Metamaterials, June 2011, Elsevier

    Dr Mangirdas Malinauskas

  99. Laser polymerization of Photonic Crystals for collimation of beams at visible wavelengths

    Article • June 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  100. Diffraction grating fabrication in lithium niobate and KDP crystals with femtosecond laser pulses

    Article • Applied Physics A, May 2011, Springer Science + Business Media

    Dr Mangirdas Malinauskas

  101. Controlled self-formation of nanofibers and nanomembranes in polymers induced by laser direct writing

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  102. Direct laser writing of microoptical structures using a germanium-containing hybrid photopolymer

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  103. Laser microstructured 3D polymeric biocompatible implants

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  104. Permanent volume Bragg grating fabrication in pure lithium niobate crystal using direct laser writing technique

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  105. Three dimensional Woodpile Photonic Crystal for collimation of light beams

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Mangirdas Malinauskas

  106. Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses

    Article • Optics Express, March 2011, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  107. Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications

    Article • Acta Biomaterialia, March 2011, Elsevier

    Dr Mangirdas Malinauskas

  108. Fabrication of Scaffolds and Micro-Lenses Array in a Negative Photopolymer SZ2080 by Multi-Photon Polymerization and Four-Femtosecond-Beam Interference

    Article • Physics Procedia, January 2011, Elsevier

    Dr Gediminas Raciukaitis, Dr Mangirdas Malinauskas

  109. Laser-Micro/Nanofabricated 3D Polymers for Tissue Engineering Applications

    Article • Latvian Journal of Physics and Technical Sciences, January 2011, De Gruyter

    Dr Mangirdas Malinauskas

  110. Volume Bragg Grating Formation in Fused Silica with High Repetition Rate Femtosecond Yb:KGW Laser Pulses

    Article • Journal of Laser Micro/Nanoengineering, December 2010, Japan Laser Processing Society

    Dr Mangirdas Malinauskas

  111. Photopolymerized microscopic vortex beam generators: Precise delivery of optical orbital angular momentum

    Article • Applied Physics Letters, November 2010, American Institute of Physics

    Dr Mangirdas Malinauskas

  112. Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization

    Article • Journal of Optics, November 2010, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  113. Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses

    Article • Optics Express, April 2010, Optical Society of America (OSA)

    Dr Mangirdas Malinauskas

  114. Laser two-photon polymerization micro- and nanostructuring over a large area on various substrates

    Article • April 2010, SPIE

    Dr Mangirdas Malinauskas

  115. Femtosecond laser fabrication of hybrid micro-optical elements and their integration on the fiber tip

    Article • April 2010, SPIE

    Dr Mangirdas Malinauskas

  116. A femtosecond laser-induced two-photon photopolymerization technique for structuring microlenses

    Article • Journal of Optics, February 2010, Institute of Physics Publishing

    Dr Mangirdas Malinauskas

  117. Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption

    Article • Lithuanian Journal of Physics, January 2010, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  118. Organic dye doped microstructures for optically active functional devices fabricated via two-photon polymerization technique

    Article • Lithuanian Journal of Physics, January 2010, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  119. Manufacturing of diffractive elements in fused silica using high repetition rate femtosecond Yb:KGW laser pulses

    Article • Lithuanian Journal of Physics, January 2010, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  120. Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers

    Article • Lithuanian Journal of Physics, January 2010, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  121. 3D artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser

    Article • Lithuanian Journal of Physics, January 2010, Lithuanian Academy of Sciences

    Dr Mangirdas Malinauskas

  122. Large Scale Laser Two-Photon Polymerization Structuring for Fabrication of Artificial Polymeric Scaffolds for Regenerative Medicine

    Article • January 2010, American Institute of Physics

    Dr Mangirdas Malinauskas

  123. Femtosecond laser-induced two-photon photopolymerization for structuring of micro-optical and photonic devices

    Article • May 2009, SPIE

    Dr Mangirdas Malinauskas

  124. Two-photon polymerization for fabrication of three-dimensional micro- and nanostructures over a large area

    Article • February 2009, SPIE

    Dr Mangirdas Malinauskas