All Stories

  1. Ergonomics in surgical environments

    Article • October 2020, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  2. Lubrication modeling and wear calculation in artificial hip joint during the gait

    Article • Tribology International, February 2020, Elsevier

    Professor Alessandro Ruggiero

  3. A Finite Element Model for the Analysis of Squeaking Hips

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  4. Design and prototype of a control for virtual environment in CHD examination

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  5. Preliminary Investigating on the Influence of Whitening on Natural Tooth Wear Resistance

    Article • October 2019, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  6. Investigation on Polymer Composite Materials Wear Reinforced by Microparticles of Jatropha Curcas L. Waste

    Article • IOP Conference Series Materials Science and Engineering, October 2019, Institute of Physics Publishing

    Professor Alessandro Ruggiero

  7. Surface analysis on revised hip implants with stem taper for wear and failure incidence evaluation: A first investigation

    Article • Measurement, October 2019, Elsevier

    Professor Alessandro Ruggiero

  8. Comparison of Meshing Strategies in THR Finite Element Modelling

    Article • Materials, July 2019, MDPI AG

    Professor Alessandro Ruggiero

  9. Tribology and Dentistry: A Commentary

    Article • Lubricants, June 2019, MDPI AG

    Professor Alessandro Ruggiero

  10. Tribological investigation of epoxy/seed particle composite obtained from residues of processing Jatropha Curcas L. fruits

    Article • Composites Part B Engineering, June 2019, Elsevier

    Professor Alessandro Ruggiero

  11. A Critical Analysis of TKR In Vitro Wear Tests Considering Predicted Knee Joint Loads

    Article • Materials, May 2019, MDPI AG

    Professor Alessandro Ruggiero

  12. A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement

    Article • IEEE Transactions on Instrumentation and Measurement, May 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  13. Accurate measurement of Kinetic Friction Coefficient by using two types of tribometer

    Article • May 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  14. Evaluation of the Applicability of 3d Models as Perceived by the Students of Health Sciences

    Article • Journal of Medical Systems, March 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero

  15. Experimental Comparison on Dental BioTribological Pairs Zirconia/Zirconia and Zirconia/Natural Tooth by Using a Reciprocating Tribometer

    Article • Journal of Medical Systems, March 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero

  16. Choice of the optimal acoustic design of a school classroom and experimental verification

    Article • Applied Acoustics, March 2019, Elsevier

    Professor Alessandro Ruggiero

  17. Tribological performances of total knee prostheses: Roughness measurements on medial and lateral compartments of retrieved femoral components

    Article • Measurement, March 2019, Elsevier

    Professor Alessandro Ruggiero

  18. Evaluation of physical phenomena and surface integrity during hydroabrasive disintegration of the rotating workpiece with feedback loop control

    Article • Measurement, February 2019, Elsevier

    Professor Alessandro Ruggiero

  19. Composites Manufacturing: A New Approaches to Simulation

    Article • January 2019, Springer Science + Business Media

    Professor Alessandro Ruggiero

  20. Experimental Description of the Aging of the Coconut Shell Powder/Epoxy Composite

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  21. Fluid Film Pressure Description in Finite Turbulent Lubricated Journal Bearings by Using the Warner’s Theory

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  22. Measurements of the Friction Coefficient: Discussion on the Results in the Framework of the Time Series Analysis

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  23. Research on Water Jet Cutting of Polymer Composites Based on Epoxy/Waste Fibres from Coconut Processing

    Article • September 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  24. Development of a Novel in Silico Model to Investigate the Influence of Radial Clearance on the Acetabular Cup Contact Pressure in Hip Implants

    Article • Materials, July 2018, MDPI AG

    Professor Alessandro Ruggiero

  25. Accurate Estimation of the Environmental Noise Through Sampling Approach: Selection of the Measurement Time

    Article • IEEE Transactions on Instrumentation and Measurement, May 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  26. Dynamical Simulations of a Flexible Rotor in Cylindrical Uncavitated and Cavitated Lubricated Journal Bearings

    Article • Lubricants, April 2018, MDPI AG

    Professor Alessandro Ruggiero

  27. Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking

    Article • Materials, April 2018, MDPI AG

    Professor Alessandro Ruggiero

  28. Mechanical properties and abrasive wear of white/brown coir epoxy composites

    Article • Composites Part B Engineering, April 2018, Elsevier

    Professor Alessandro Ruggiero

  29. Wear Behaviours and Oxidation Effects on Different UHMWPE Acetabular Cups Using a Hip Joint Simulator

    Article • Materials, March 2018, MDPI AG

    Professor Alessandro Ruggiero

  30. Musa textilis Cellulose Fibres in Biocomposites – An Investigation of Mechanical Properties and Microstructure

    Article • BioResources, March 2018, BioResources

    Professor Alessandro Ruggiero

  31. Different Digitalization Techniques for 3D Printing of Anatomical Pieces

    Article • Journal of Medical Systems, January 2018, Springer Science + Business Media

    Professor Alessandro Ruggiero

  32. A study evaluating the level of satisfaction of the students of health sciences about the use of 3D printed bone models

    Article • January 2018, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  33. On the Dental BioTribology

    Article • January 2018, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  34. Estimation of the minimum measurement time interval in acoustic noise

    Article • Applied Acoustics, December 2017, Elsevier

    Professor Alessandro Ruggiero

  35. On the biotribology of total knee replacement: a new roughness measurements protocol on in vivo condyles considering the dynamic loading from musculoskeletal multibody model

    Article • Measurement, December 2017, Elsevier

    Professor Alessandro Ruggiero

  36. Tribological characterization of vegetal lubricants: Comparative experimental investigation on Jatropha curcas L. oil, Rapeseed Methyl Ester oil, Hydrotreated Rapeseed oil

    Article • Tribology International, May 2017, Elsevier

    Professor Alessandro Ruggiero

  37. Choosing Bootstrap Method for the Estimation of the Uncertainty of Traffic Noise Measurements

    Article • IEEE Transactions on Instrumentation and Measurement, May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  38. Influence of measurement time on acoustic noise uncertainty

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  39. Experimental description of strength and tribological characteristic of EFB oil palm fibres/epoxy composites with technologically undemanding preparation

    Article • Composites Part B Engineering, April 2017, Elsevier

    Professor Alessandro Ruggiero

  40. Innovative bootstrap approach for the estimation of minimum measurement time interval in road traffic noise evaluation

    Article • Measurement, February 2017, Elsevier

    Professor Alessandro Ruggiero

  41. Does metal transfer differ on retrieved Biolox® Delta composites femoral heads? Surface investigation on three Biolox® generations from a biotribological point of view

    Article • Composites Part B Engineering, January 2017, Elsevier

    Professor Alessandro Ruggiero

  42. Measurement capabilities for ball bearing wear assessment

    Article • Procedia Manufacturing, January 2017, Elsevier

    Professor Alessandro Ruggiero

  43. Noise Pollution: What the Scientific Community Can Do?

    Article • Environment Pollution and Climate Change, January 2017, OMICS Publishing Group

    Professor Alessandro Ruggiero

  44. The Importance of Uncertainty in the Noise Pollution Measurements

    Article • Environment Pollution and Climate Change, January 2017, OMICS Publishing Group

    Professor Alessandro Ruggiero

  45. Using simulation software in composites industry

    Article • January 2017, Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (ICST)

    Professor Alessandro Ruggiero

  46. Systems of digitalization and processing of anatomical pieces for their three-dimensional reconstruction

    Article • January 2017, ACM (Association for Computing Machinery)

    Professor Alessandro Ruggiero

  47. Strength Characteristics of Untreated Short-fibre Composites from the Plant Ensete ventricosum

    Article • BioResources, November 2016, BioResources

    Professor Alessandro Ruggiero

  48. Determining environmental noise measurement uncertainty in the context of the Italian legislative framework

    Article • Measurement, November 2016, Elsevier

    Professor Alessandro Ruggiero

  49. Exploitation of waste date seeds of Phoenix dactylifera in form of polymeric particle biocomposite: Investigation on adhesion, cohesion and wear

    Article • Composites Part B Engineering, November 2016, Elsevier

    Professor Alessandro Ruggiero

  50. Material utilization of waste originating during processing of plant Jatropha curcas L. In biocomposites – adhesive-cohesive characteristics and wear

    Article • Tehnicki vjesnik - Technical Gazette, October 2016, Mechanical Engineering Faculty in Slavonski Brod

    Professor Alessandro Ruggiero

  51. Tribodiagnostic investigation on oil filtration: results from a novel apparatus

    Article • Industrial Lubrication and Tribology, September 2016, Emerald

    Professor Alessandro Ruggiero

  52. On the Improvement of AA2024 Wear Properties through the Deposition of a Cold-Sprayed Titanium Coating

    Article • Metals, August 2016, MDPI AG

    Professor Alessandro Ruggiero

  53. Transfer of metallic debris after in vitro ceramic-on-metal simulation: Wear and degradation in Biolox® Delta composite femoral heads

    Article • Composites Part B Engineering, July 2016, Elsevier

    Professor Alessandro Ruggiero

  54. Acoustical design and experimental verification of school music rooms: A case study

    Article • Applied Acoustics, June 2016, Elsevier

    Professor Alessandro Ruggiero

  55. On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol

    Article • Measurement, May 2016, Elsevier

    Professor Alessandro Ruggiero

  56. Does metal transfer affect the tribological behaviour of femoral heads? Roughness and phase transformation analyses on retrieved zirconia and Biolox® Delta composites

    Article • Composites Part B Engineering, May 2016, Elsevier

    Professor Alessandro Ruggiero

  57. A preliminary study on the estimation of the uncertainty of traffic noise measurements

    Article • May 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  58. Experimental comparison on tribological pairs UHMWPE/TIAL6V4 alloy, UHMWPE/AISI316L austenitic stainless and UHMWPE/AL2O3 ceramic, under dry and lubricated conditions

    Article • Tribology International, April 2016, Elsevier

    Professor Alessandro Ruggiero

  59. Environmental Acoustic Noise Measurement Uncertainty

    Article • IEEE Transactions on Instrumentation and Measurement, February 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  60. On the Tribological Performance of Vegetal Lubricants: Experimental Investigation on Jatropha Curcas L. oil

    Article • Procedia Engineering, January 2016, Elsevier

    Professor Alessandro Ruggiero

  61. Research on Influence of Loading Speed of Structural Two-component Epoxy Adhesives on Adhesive Bond Strength

    Article • Procedia Engineering, January 2016, Elsevier

    Professor Alessandro Ruggiero

  62. Measurement of thermal emission during cutting of materials using abrasive water jet

    Article • Thermal Science, January 2016, National Library of Serbia

    Professor Alessandro Ruggiero

  63. Experimental analysis of tribological behavior of UHMWPE against AISI420C and against TiAl6V4 alloy under dry and lubricated conditions

    Article • Tribology International, December 2015, Elsevier

    Professor Alessandro Ruggiero

  64. Advanced biomaterials in hip joint arthroplasty. A review on polymer and ceramics composites as alternative bearings

    Article • Composites Part B Engineering, December 2015, Elsevier

    Professor Alessandro Ruggiero

  65. Tribo-mechanical characterization of reinforced epoxy resin under dry and lubricated contact conditions

    Article • Composites Part B Engineering, September 2015, Elsevier

    Professor Alessandro Ruggiero

  66. Analytical fluid film force calculation in the case of short bearing with a fully developed turbulent flow

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, August 2015, SAGE Publications

    Professor Alessandro Ruggiero

  67. Mechanical and Tribological Characterization of Composite Laminates Manufactured by Liquid Composite Molding Processes

    Article • Key Engineering Materials, July 2015, Trans Tech Publications

    Professor Alessandro Ruggiero, Pierpaolo Carlone

  68. Towards the evaluation of the measurement uncertainty of environmental acoustic noise

    Article • May 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alessandro Ruggiero

  69. knee prostheses

    Article • The International Journal of Artificial Organs, December 2014, Wichtig

    Professor Alessandro Ruggiero

  70. Online Monitoring and Analysis of Hydroabrasive Cutting by Vibration

    Article • Advances in Mechanical Engineering, January 2013, SAGE Publications

    Professor Alessandro Ruggiero

  71. Approximate closed-form solution of the synovial fluid film force in the human ankle joint with non-Newtonian lubricant

    Article • Tribology International, January 2013, Elsevier

    Professor Alessandro Ruggiero

  72. 10th International Conference “BIOMDLORE 2013”

    Article • January 2013, Vilnius Gediminas Technical University

    Professor Alessandro Ruggiero

  73. Approximate Analytical Model for the Squeeze-Film Lubrication of the Human Ankle Joint with Synovial Fluid Filtrated by Articular Cartilage

    Article • Tribology Letters, October 2010, Springer Science + Business Media

    Professor Alessandro Ruggiero

  74. Unsteady oil film forces in porous bearings: analysis of  permeability effect on the rotor linear stability

    Article • Meccanica, November 2008, Springer Science + Business Media

    Professor Alessandro Ruggiero

  75. Approximate closed-form solution for the dynamical analysis of short bearings with couple stress fluid

    Article • Lubrication Science, January 2007, Wiley

    Professor Alessandro Ruggiero

  76. Approximate model for unsteady finite porous journal bearings fluid film force calculation

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2006, SAGE Publications

    Professor Alessandro Ruggiero

  77. On the effective length of the top piston ring involved in hydrodynamic lubrication

    Article • Lubrication Science, May 2005, Wiley

    Professor Alessandro Ruggiero