All Stories

  1. Damage Detection and Quantification via Multiview DIC at Varying Scales
  2. Brightness and contrast corrections for stereocorrelation
  3. Damage Detection in a Polymer Matrix Composite from 4D Displacement Field Measurements
  4. Digital image correlation analyses of masonry infilled frame: Uncertainty-based mesh refinement and damage quantification
  5. Mesoscale DVC analyses and parameter calibration for pantographic block in 3-point flexure
  6. Experimental and numerical analyses of the interaction of creep with mesoscale damage in cementitious materials
  7. Damage evolution in coal under different loading modes using advanced digital volume correlation based on X-ray computed tomography
  8. Modal characterization of crack network development in an MgO containing refractory castable
  9. Characterization of glass fiber reinforced polymer via Digital Volume Correlation: Investigation of notch sensitivity
  10. Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8
  11. Deformation mode in 3-point flexure on pantographic block
  12. Digital Volume Correlation for large deformations of soft tissues: Pipeline and proof of concept for the application to breast ex vivo deformations
  13. Identification of microscale fracture models for mortar with in-situ tests
  14. Calibration of cohesive parameters for a castable refractory using 4D tomographic data and realistic crack path from in-situ wedge splitting test
  15. Probing Constitutive Models of Bohus Granite with In Situ Spherical Indentation and Digital Volume Correlation
  16. 2D Numerical Simulation of Auxetic Metamaterials Based on Force and Deformation Consistency
  17. Insights into a dual-phase steel microstructure using EBSD and image-processing-based workflow
  18. Parametric Experimentation to Evaluate Chiral Bars Representative of Granular Motif
  19. An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging
  20. Multiscalar DIC analyses of granular string under stretch reveal non-standard deformation mechanisms
  21. On mesoscale strain fluctuations in tensile tests on additively manufactured 17-4PH stainless steel
  22. Damage Quantification via Digital Volume Correlation with Heterogeneous Mechanical Regularization: Application to an In situ Meso-Flexural Test on Mortar
  23. Improvement of the Arcan Setup for the Investigation of Thin Sheet Behavior Under Shear Loading
  24. Sub-pixel detection of laser-induced damage and its growth on fused silica optics using registration residuals
  25. Pyramidal adaptive meshing for Digital Image Correlation dealing with cracks
  26. Fracture energy evaluation of refractories in wedge splitting tests from notch opening displacements
  27. Effective Toughness of Heterogeneous Materials with Rate-Dependent Fracture Energy
  28. On the calibration of cohesive parameters for refractories from notch opening displacements in wedge splitting tests
  29. Displacement Uncertainty Quantifications in T3-Stereocorrelation
  30. Crack growth measurement and J ‐integral evaluation of additively manufactured polymer using digital image correlation and FE modeling
  31. On the effect of sintering temperature on the fracture energy of an Alumina-Mullite-Zirconia castable at 600°C
  32. In-situ X-CT Test on Mortar Micro-specimen Coupled with Mesoscale Numerical Simulations of Fracture
  33. Study of Frictional Effects of Granite Subjected to Quasi-Static Contact Loading
  34. Poynting effects in pantographic metamaterial captured via multiscale DVC
  35. Optimized gauging for tire-rim loading identification
  36. Multiscale DIC Applied to Pantographic Structures
  37. Interlaboratory Study of Digital Volume Correlation Error Due to X-Ray Computed Tomography Equipment and Scan Parameters: an Update from the DVC Challenge
  38. On the validation of a priori estimates of standard displacement uncertainties in T3-stereocorrelation
  39. On the identification of cohesive zone model for curved crack in mortar
  40. Displacement uncertainties with multiview correlation schemes
  41. Measuring acceleration fields via regularized digital image correlation
  42. Toward virtual design and optimization of a structural test monitored by a multi-view system
  43. Two-dimensional continua capable of large elastic extension in two independent directions: asymptotic homogenization, numerical simulations and experimental evidence
  44. Global digital image correlation up to very high temperatures with grey level corrections
  45. Sub-minute In Situ Fracture Test in a Laboratory CT Scanner
  46. Calibrating thermoelastic stress analysis with integrated digital image correlation: Application to fatigue cracks
  47. Measurement of kinematic fields via DIC for impact engineering applications
  48. Estimation of Elastic Strain by Integrated Image Correlation on Electron Diffraction Patterns
  49. Crack initiation and propagation under thermal fatigue of austenitic stainless steel
  50. Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs
  51. On the analysis of heat haze effects with spacetime DIC
  52. On the analysis of canvas wrinkling via isogeometric stereocorrelation
  53. Fast four-dimensional tensile test monitored via X-ray computed tomography: Single projection–based digital volume correlation dedicated to slender samples
  54. Mode-enhanced space-time DIC: Applications to ultra high-speed imaging
  55. Validation of Registration Techniques Applied to XRD Signals for Stress Evaluations in Titanium Alloys
  56. Digital Volume Correlation: Review of Progress and Challenges
  57. Enhanced Piola–Hencky discrete models for pantographic sheets with pivots without deformation energy: numerics and experiments
  58. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage
  59. Measuring topographies from conventional SEM acquisitions
  60. Spatiotemporal regularization for digital image correlation: Application to infrared camera frames
  61. Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements
  62. Regularised digital-level corrections for infrared image correlation
  63. Self-calibration for lab-μCT using space-time regularized projection-based DVC and model reduction
  64. Evaluation of measurement uncertainties of digital volume correlation applied to laminography data
  65. Experimental-Numerical Validation Framework for Micromechanical Simulations
  66. Backtracking Depth-Resolved Microstructures for Crystal Plasticity Identification—Part 1: Backtracking Microstructures
  67. An extension of digital volume correlation for multimodality image registration
  68. On the identifiability of Hill-1948 plasticity model with a single biaxial test on very thin sheet
  69. Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging
  70. I-DIC-based identification strategy of failure criteria: application to titanium and nickel-based alloys
  71. Identification method for the mixed mode interlaminar behavior of a composite thermoset using displacement field measurements and load data
  72. Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification–Analysis of uniaxial tests
  73. Identification of crystal plasticity parameters using DIC measurements and weighted FEMU
  74. Experimental and numerical analysis of thermal striping in automotive brake discs
  75. Toward 4D mechanical correlation
  76. Mesh-Based Shape Measurements with Stereocorrelation
  77. Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements
  78. Integrated Digital Image Correlation considering gray level and blur variations: Application to distortion measurements of IR camera
  79. elastoplastic identification
  80. Constitutive model for flake graphite cast iron automotive brake discs: induced anisotropic damage model under complex loadings
  81. Constitutive model for flake graphite cast iron automotive brake discs: from macroscopic multiscale models to a 1D rheological description
  82. On the Evaluation of Stress Triaxiality Fields in a Notched Titanium Alloy Sample Via Integrated Digital Image Correlation
  83. Analysis of Asymmetrical Creep of a Ceramic at 1350°C by Digital Image Correlation
  84. Identification of a set of macroscopic elastic parameters in a 3D woven composite: Uncertainty analysis and regularization
  85. Damage measurements via DIC
  86. Recent Advances and Perspectives in Digital Image Correlation
  87. On characteristic parameters involved in dynamic fragmentation processes
  88. DIC identification and X-FEM simulation of fatigue crack growth based on the Williams’ series
  89. Damage law identification from full field displacement measurement: Application to four-point bending test for plasterboard
  90. A numerical study of the influence from pre-existing cracks on granite rock fragmentation at percussive drilling
  91. Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum
  92. Projection Savings in CT-based Digital Volume Correlation
  93. Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC
  94. Integrated digital image correlation for the evaluation and correction of optical distortions
  95. In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet
  96. Localized strain field measurement on laminography data with mechanical regularization
  97. Direct Stress-Strain Measurements from Bulged Membranes Using Topography Image Correlation
  98. Thermo-mechanical behavior and fatigue strength of a grey cast iron for automotive brake discs considering graphite flakes debonding
  99. Characterization of SEM speckle pattern marking and imaging distortion by digital image correlation
  100. Granite rock fragmentation at percussive drilling - experimental and numerical investigation
  101. Nonlinear mechanical properties estimated from images of a mechanical test
  102. CAD-based calibration and shape measurement with stereoDIC
  103. Efficient Binary Tomographic Reconstruction
  104. Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis
  105. Controlling Stress Intensity Factor Histories with Digital Images
  106. Performing DVC at the Voxel Scale
  107. Shape Measurement Using CAD-Based Stereo-DIC
  108. 2D and 3D Analyses of Cracks Via DIC
  109. Mechanics-aided digital image correlation
  110. Identification of interlaminar fracture properties of a composite laminate using local full-field kinematic measurements and finite element simulations
  111. Experimental analysis of masonry infilled frames using digital image correlation
  112. Image-based identification procedure of a crack propagation law
  113. Description of the Dynamic Fragmentation of Glass with a Meso-Damage Model
  114. Deformation modes of nanostructured thin film under controlled biaxial deformation
  115. Addendum to: Assessment of Digital Image Correlation Measurement Errors: Methodology and Results [Experimental Mechanics 49(3)]
  116. A Non-Local Damage Model for Heterogeneous Rocks - Application to Rock Fracturing Evaluation Under Gas Injection Conditions
  117. Probabilistic Prediction of Fatigue Life of Cracked Parts: Linear Elastic Fracture Mechanics based Approach
  118. Experimental Facility for High Cycle Thermal Fatigue Tests Using Laser Shocks
  119. Experimental analysis and mathematical modeling of fracture in RC elements with any aspect ratio
  120. Full-Field Measurements and Identification in Solid Mechanics
  121. Digital Image Correlation
  122. Analysis of necking in high speed experiments by stereocorrelation
  123. Tomographic reconstruction of binary fields
  124. On the Resolution of Local and Global DIC Approaches
  125. Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation
  126. CAD-Based Calibration of a 3D DIC System
  127. Artifact Correction for DVC Measurements Using a Laboratory X-Ray Source
  128. 3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study
  129. Global Digital Image Correlation for Pressure Deflected Membranes
  130. Volume changes in a filled elastomer studied via digital image correlation
  131. « Radioscopies » d’une fissure de fatigue
  132. Utilisation de l’imagerie IR pour l’étude de la fatigue des aciers. Premières observations d’effets de surface
  133. Analysis of image series through global digital image correlation
  134. A probabilistic nonlocal model for crack initiation and propagation in heterogeneous brittle materials
  135. Comparison of Local and Global Approaches to Digital Image Correlation
  136. Identification of a crack propagation law by digital image correlation
  137. Three-dimensional Analysis of Fatigue Crack Propagation using X-Ray Tomography, Digital Volume Correlation and Extended Finite Element Simulations
  138. Mechanical Assistance to DIC
  139. Foreword
  140. Digital volume correlation: what are the limits to the spatial resolution?
  141. Compression Test for Metal Characterization using Digital Image Correlation and Inverse Modeling
  142. Combined synchrotron X-ray and image-correlation analyses of biaxially deformed W/Cu nanocomposite thin films on Kapton
  143. A critical local energy release rate criterion for fatigue fracture of elastomers
  144. Digital volume correlation analyses of synchrotron tomographic images
  145. Identification of In Situ Frictional Properties of Bolted Assemblies with Digital Image Correlation
  146. Fatigue microcrack detection with digital image correlation
  147. Optimal and noise-robust extraction of Fracture Mechanics parameters from kinematic measurements
  148. Hydro-mechanical modelling of geological CO2storage and the study of possible caprock fracture mechanisms
  149. On the stored and dissipated energies in heterogeneous rate-independent materials
  150. Advanced Imaging Methods
  151. On the Identification and Validation of an Anisotropic Damage Model Using Full-field Measurements
  152. On the analysis of notched concrete beams: From measurement with digital image correlation to identification with boundary element method of a cohesive model
  153. Measurement of applied strains in thin films deposited onto polymer by synchrotron X-ray diffraction
  154. IDENTIFICATION AND PROBABILISTIC MODELING OF MESOCRACK INITIATIONS IN 304L STAINLESS STEEL
  155. Fatigue crack propagation law measured from integrated digital image correlation: the example of Ti35 thin sheets
  156. Calibration of constitutive models of steel beams subject to local buckling by using digital image correlation
  157. A space–time approach in digital image correlation: Movie-DIC
  158. Enriched kinematic fields of cracked structures
  159. 3D X-ray Microtomography Volume Correlation to Study Fatigue Crack Growth
  160. Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response
  161. Voxel-Scale Digital Volume Correlation
  162. Hydro-mechanical modelling of geological CO2storage and the study of possible caprock fracture mechanisms
  163. Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source
  164. Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation
  165. Three dimensional experimental and numerical multiscale analysis of a fatigue crack
  166. Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue
  167. Mixed-mode crack propagation using a Hybrid Analytical and eXtended Finite Element Method
  168. Dialogue essais-modèle pour l’interprétation des liens entre mesure d’auto-échauffement sous chargement cyclique et fatigue polycyclique
  169. Dissipation Measurements in Steel Sheets Under Cyclic Loading by Use of Infrared Microthermography
  170. Microstructure-Aided Digital Volume Correlation
  171. Mechanical characterization of nanostructured thin films at different scales
  172. Identification of heat source fields from infrared thermography: Determination of ‘self-heating’ in a dual-phase steel by using a dog bone sample
  173. Characterization of Necking Phenomena in High-Speed Experiments by Using a Single Camera
  174. A Probabilistic Damage Model of the Dynamic Fragmentation Process in Brittle Materials
  175. On probabilistic aspects in the dynamic degradation of ductile materials
  176. Complexity of shear localization in a Zr-based bulk metallic glass
  177. On the dynamic fragmentation of glass: a meso-damage model
  178. Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks
  179. 3D analysis from micro-MRI during in situ compression on cancellous bone
  180. Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images
  181. Hybrid analytical and extended finite element method (HAX-FEM): A new enrichment procedure for cracked solids
  182. Identification of adhesive properties in GLARE assemblies using digital image correlation
  183. An extended and integrated digital image correlation technique applied to the analysis of fractured samples. The equilibrium gap method as a mechanical filter
  184. Three-dimensional analysis of a compression test on stone wool
  185. Parameter choice for optimized digital image correlation
  186. Digital image correlation and biaxial test on composite material for anisotropic damage law identification
  187. Charge redistribution in electrochemically actuated mechanical sensors
  188. Displacement measurement technique for beam kinematics
  189. A probabilistic model to predict the formation and propagation of crack networks in thermal fatigue
  190. Coupled hydromechanical modeling to study the integrity and safety of geological storage of CO2
  191. Application of the virtual fields method to mechanical characterization of elastomeric materials
  192. On the stored and dissipated energies in heterogeneous rate-independent systems: theory and simple examples
  193. Integrated Digital Image Correlation for the Identification of Mechanical Properties
  194. Editorial
  195. Assessment of Digital Image Correlation Measurement Errors: Methodology and Results
  196. Metrology and detonics: analysis of necking
  197. Self-consistent scheme for toughness homogenization
  198. Recent progress in digital image correlation: From measurement to mechanical identification
  199. From digital image correlation to damage law identification
  200. Experimental investigation of localized phenomena using digital image correlation
  201. On the dynamic fragmentation of two limestones using edge-on impact tests
  202. Noise-robust stress intensity factor determination from kinematic field measurements
  203. HIGH-CYCLE FATIGUE DEVICE FOR LOW STIFFNESS COMPONENTS
  204. Contrôler une machine d'essai avec une caméra
  205. Three-dimensional image correlation from X-ray computed tomography of solid foam
  206. Extended three-dimensional digital image correlation (X3D-DIC)
  207. Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements
  208. Digital Image Mechanical Identification (DIMI)
  209. Dynamic Fragmentation of an Ultrahigh-Strength Concrete during Edge-On Impact Tests
  210. A Study of Large Plastic Deformations in Dual Phase Steel Using Digital Image Correlation and FE Analysis
  211. Probabilistic Modeling of Crack Networks in Thermal Fatigue
  212. Mechanical Properties of Crimped Mineral Wools: Identification From Digital Image Correlation
  213. A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis
  214. Shock enhancement of cellular structures under impact loading: Part II analysis
  215. Shock enhancement of cellular structures under impact loading: Part I Experiments
  216. Shear-band capturing using a multiscale extended digital image correlation technique
  217. A Study of Large Plastic Deformations in Dual Phase Steel Using Digital Image Correlation and FE Analysis
  218. Stress Intensity Factor Gauging by Digital Image Correlation: Application in Cyclic Fatigue
  219. Identification of the electroelastic coupling from full multi-physical fields measured at the micrometre scale
  220. Identification of elastic property and loading fields from full-field displacement measurements
  221. CONTROLLING TESTING MACHINES WITH DIGITAL IMAGE CORRELATION
  222. Identification of a Damage Law by Using Full-field Displacement Measurements
  223. Determination of an HCF criterion by thermal measurements under biaxial cyclic loading
  224. From pictures to extended finite elements: extended digital image correlation (X-DIC)
  225. Prediction of self-heating measurements under proportional and non-proportional multiaxial cyclic loadings
  226. Local anisotropy analysis for non-smooth images
  227. A probabilistic model for multiaxial high cycle fatigue
  228. Extended digital image correlation with crack shape optimization
  229. Measurement and Identification Techniques for Evolving Discontinuities
  230. Specific effects and deconvolution in submicrometre EPMA: application to binary diffusion
  231. Effect of Slag Impregnation on Thermal Degradations in Refractories
  232. Material-independent crack arrest statistics: application to indentation experiments
  233. “Finite-Element” Displacement Fields Analysis from Digital Images: Application to Portevin–Le Châtelier Bands
  234. Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test
  235. Modelling dynamic fragmentation of rocks
  236. Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches
  237. Localisation de la déformation par corrélation d'images numériques sur laine de verre crêpée
  238. On the formation of crack networks in high cycle fatigue
  239. Numerical modeling of crack propagation and shielding effects in a striping network
  240. Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review
  241. Measuring stress intensity factors with a camera: Integrated digital image correlation (I-DIC)
  242. Strain heterogeneities and local anisotropy in crimped glass wool
  243. Modelling of high temperature asymmetric creep behavior of ceramics
  244. A stress scale in full-field identification procedures: a diffuse stress gauge
  245. Thermal evaluation of the mean fatigue limit of a complex structure
  246. A probabilistic two-scale model for high-cycle fatigue life predictions
  247. Digital image correlation used for mechanical tests on crimped glass wool samples
  248. Analyse d'un mode de vieillissement dans un assemblage céramique/métal
  249. Identification of the scatter in high cycle fatigue from temperature measurements
  250. A finite element formulation to identify damage fields: the equilibrium gap method
  251. Probabilistic Approach to Predict Cracking in Lightly Reinforced Microconcrete Panels
  252. Material-independent crack arrest statistics
  253. A method to determine the macroscopic toughness scatter of brittle materials
  254. Identification de conductivités thermiques et de propriétés élastiques locales par analyse de champsIdentification of thermal conductivities and elastic properties by field analyses
  255. Effect of aluminum reinforcement on the dynamic fragmentation of SiC ceramics
  256. Experiments and modelling of the compressive behaviour of two SiC ceramics
  257. Effective toughness of heterogeneous brittle materials
  258. On the probabilistic–deterministic transition involved in a fragmentation process of brittle materials
  259. The role of surface and volume defects in the fracture of glass under quasi-static and dynamic loadings
  260. Long-Term Reliability of Brittle Materials: The Issue of Crack Arrest
  261. Specific effects and deconvolution in submicrometre EPMA: application to binary diffusion
  262. Response of saturated porous media to cyclic thermal loading
  263. Identification of damage fields using kinematic measurements
  264. Analysis of a Multiaxial Test on a C/C Composite by Using Digital Image Correlation and a Damage Model
  265. Analysis of mechanical behavior and in-situ observations of Cu-Al-Be SMA under biaxial compressive tests by using DIC
  266. Identification of elastic parameters by displacement field measurement
  267. Dynamic fragmentation of brittle solids: a multi-scale model
  268. Isochronous analysis of the behaviour of ceramic-matrix composites under thermomechanical cyclic loading conditions
  269. Digital image correlation used to analyze the multiaxial behavior of rubber-like materials
  270. A probabilistic approach to predict the very high-cycle fatigue behaviour of spheroidal graphite cast iron structures
  271. On the mechanical behaviour under cyclic loading of ceramic matrix composites
  272. The behavior of ceramic-matrix composites under thermo-mechanical cyclic conditions
  273. On the continuum description of damage in fiber-reinforced composites
  274. Statistical damage tolerance for cast iron under fatigue loadings
  275. Matrix cracking and debonding of ceramic-matrix composites
  276. Fatigue failure maps of heterogeneous materials
  277. Micro-mechanics and continuum damage mechanics
  278. Ultimate tensile strength during fatigue of fiber-reinforced ceramic-matrix composites
  279. Localization and ultimate tensile strength of fiber-reinforced ceramic-matrix composites
  280. Tensile and flexural ultimate strength of fiber-reinforced ceramic-matrix composites
  281. Uncoupled and coupled approaches to predict macrocrack initiation in fiber reinforced ceramic matrix composites
  282. Localization due to damage in fiber-reinforced composites
  283. Fatigue initiation in heterogeneous brittle materials
  284. Shock Enhancement due to Shock Front Propagation in Cellular Materials
  285. Mechanical Properties of Crimped Mineral Wools: Identification from Digital Image Correlation