All Stories

  1. A sustainable sulfur–carbonaceous composite electrode toward high specific energy rechargeable cells
  2. Three-Dimensionally Aligned Sulfur Electrodes by Directional Freeze Tape Casting
  3. Tracking the Chemical and Structural Evolution of the TiS2 Electrode in the Lithium-Ion Cell Using Operando X-ray Absorption Spectroscopy
  4. Aqueous-Processable Redox-Active Supramolecular Polymer Binders for Advanced Lithium/Sulfur Cells
  5. Electrochemical Reaction Mechanism of the MoS2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy
  6. Sulfur deposition process for sulfur-graphene oxide composites in Li/S Cells
  7. Method for Creation of Fine Sulfur Particles with Graphene Oxide for Lithium/Sulfur Cells
  8. Freeze-Dried Sulfur–Graphene Oxide–Carbon Nanotube Nanocomposite for High Sulfur-Loading Lithium/Sulfur Cells
  9. Revealing the Electrochemical Charging Mechanism of Nanosized Li2S by in Situ and Operando X-ray Absorption Spectroscopy
  10. Understanding the function of cetyltrimethyl ammonium bromide in lithium/sulfur cells
  11. Effects of Solvents on the Electrochemical Performance of LiFePO4 /C Composite Electrodes
  12. Redox-Active Supramolecular Polymer Binders for Lithium–Sulfur Batteries That Adapt Their Transport Properties in Operando
  13. Polypyrrole/TiO2 nanotube arrays with coaxial heterogeneous structure as sulfur hosts for lithium sulfur batteries
  14. Numerical and Experimental Investigation of Performance Characteristics of Lithium/Sulfur Cells
  15. Li2S nano spheres anchored to single-layered graphene as a high-performance cathode material for lithium/sulfur cells
  16. Correction to “X-ray Absorption Spectroscopic Characterization of the Synthesis Process: Revealing the Interactions in Cetyltrimethylammonium Bromide-Modified Sulfur–Graphene Oxide Nanocomposites”
  17. X-ray Absorption Spectroscopic Characterization of the Synthesis Process: Revealing the Interactions in Cetyltrimethylammonium Bromide-Modified Sulfur–Graphene Oxide Nanocomposites
  18. Electrochemical and Structural Investigation of the Mechanism of Irreversibility in Li3V2(PO4)3Cathodes
  19. A singular flexible cathode for room temperature sodium/sulfur battery
  20. X-ray Absorption Spectroscopy Characterization of a Li/S Cell
  21. Effects of cell construction parameters on the performance of lithium/sulfur cells
  22. A Conversation with Adam Heller
  23. Lithium Sulfide (Li2S)/Graphene Oxide Nanospheres with Conformal Carbon Coating as a High-Rate, Long-Life Cathode for Li/S Cells
  24. Review—Recent Progress in Electrocatalysts for Oxygen Reduction Suitable for Alkaline Anion Exchange Membrane Fuel Cells
  25. High-performance lithium/sulfur cells with a bi-functionally immobilized sulfur cathode
  26. Anodic Oxidation of COads Derived from Methanol on Pt Electrocatalysts Linked to the Bonding Type and Adsorption Site
  27. Comparisons of heat treatment on the electrochemical performance of different carbons for lithium-oxygen cells
  28. Durable Carbon-Coated Li2S Core–Shell Spheres for High Performance Lithium/Sulfur Cells
  29. Understanding the degradation mechanism of rechargeable lithium/sulfur cells: a comprehensive study of the sulfur–graphene oxide cathode after discharge–charge cycling
  30. A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
  31. Electrochemical Oxygen Reduction Behavior of Selectively Deposited Platinum Atoms on Gold Nanoparticles
  32. Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
  33. Nanostructured Li2S–C Composites as Cathode Material for High-Energy Lithium/Sulfur Batteries
  34. Foreword
  35. Investigation into Electrochemical Oxygen Reduction on Platinum in Tetraethylammonium Hydroxide and Effect of Addition of Imidazole and 1,2,4-Triazole
  36. Nano-carbon/sulfur composite cathode materials with carbon nanofiber as electrical conductor for advanced secondary lithium/sulfur cells
  37. Porous carbon-sulfur composite cathode for lithium/sulfur cells
  38. Carbon nanofiber–sulfur composite cathode materials with different binders for secondary Li/S cells
  39. SnS2 nanoparticle loaded graphene nanocomposites for superior energy storage
  40. Nanoconic TiO2 hollow spheres: novel buffers architectured for high-capacity anode materials
  41. Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
  42. Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
  43. Electrochemical performance of TiO2 and NiO as fuel cell electrode additives
  44. Depth profile analysis of a cycled lithium ion manganese oxide battery electrode via the valence state of manganese, with soft X-ray emission spectroscopy
  45. Batteries for Electric and Hybrid-Electric Vehicles
  46. Structural and Electrochemical Investigation of Li(Ni[sub 0.4]Co[sub 0.15]Al[sub 0.05]Mn[sub 0.4])O[sub 2] Cathode Material
  47. Electro-oxidation kinetics of adsorbed CO on platinum electrocatalysts
  48. Rechargeable Li/LiFePO4 cells using N-methyl-N-butyl pyrrolidinium bis(trifluoromethane sulfonyl)imide–LiTFSI electrolyte incorporating polymer additives
  49. Site-Dependent 13C Chemical Shifts of CO Adsorbed on Pt Electrocatalysts
  50. N-Methyl-(n-butyl)pyrrolidinium bis(trifluoromethanesulfonyl)imide-LiTFSI–poly(ethylene glycol) dimethyl ether mixture as a Li/S cell electrolyte
  51. Characterization of N-Methyl-N-Butylpyrrolidinium Bis(trifluoromethanesulfonyl)imide-LiTFSI-Tetra(ethylene glycol) Dimethyl Ether Mixtures as a Li Metal Cell Electrolyte
  52. Characterizing electrocatalytic surfaces: Electrochemical and NMR studies of methanol and carbon monoxide on Pt/C
  53. Covalency Measurements via NMR in Lithium Metal Phosphates
  54. Structure and electrochemical characterization of LiNi0.3Co0.3Mn0.3Fe0.1O2 cathode for lithium secondary battery
  55. Lithium K(1s) synchrotron NEXAFS spectra of lithium-ion battery cathode, anode and electrolyte materials
  56. Characterization of LiCoO2 coated Li1.05Ni0.35Co0.25Mn0.4O2 cathode material for lithium secondary cells
  57. High-rate capable organic radical cathodes for lithium rechargeable batteries
  58. Cell properties for modified PTMA cathodes of organic radical batteries
  59. Al-laminated film packaged organic radical battery for high-power applications
  60. In Situ X-Ray Absorption Spectroscopic Study of Li[sub 1.05]Ni[sub 0.35]Co[sub 0.25]Mn[sub 0.4]O[sub 2] Cathode Material Coated with LiCoO[sub 2]
  61. Characterization of Electrospun PVdF Fiber-Based Polymer Electrolytes
  62. Electrochemical and spectroscopic measurements for stable nitroxyl radicals
  63. Characterization of La 0.8 Sr 0.2 Fe O 3 − δ and La 0.7 Sr 0.2 Fe O 3 − δ as a function of temperature by x-ray absorption spectroscopy
  64. Local structure of LiNi0.5Mn0.5O2 cathode material probed by in situ x-ray absorption spectroscopy
  65. In situ X-ray absorption spectroscopy—A probe of cathode materials for Li-ion cells
  66. An effective stochastic excitation strategy for finding elusive NMR signals from solids
  67. Lanthanide–Platinum Intermetallic Compounds as Anode Electrocatalysts for Direct Ethanol PEM Fuel Cells
  68. Lanthanide–Platinum Intermetallic Compounds as Anode Electrocatalysts for Direct Ethanol PEM Fuel Cells
  69. Preparation and Characterization of Li[sub 1.05][Ni[sub 0.35]Co[sub 025]Mn[sub 0.4]]O[sub 2] as a Cathode Material for Rechargeable Lithium Cells
  70. Investigation of particle isolation in Li-ion battery electrodes using 7Li NMR spectroscopy
  71. Structural investigations of LiFePO4 electrodes and in situ studies by Fe X-ray absorption spectroscopy
  72. In situ x-ray absorption spectroscopic study of the Li[Ni1∕3Co1∕3Mn1∕3]O2 cathode material
  73. Self-discharge of lithium–sulfur cells using stainless-steel current-collectors
  74. Layered Nickel Oxide-Based Cathodes for Lithium Cells: Analysis of Performance Loss Mechanisms
  75. Synchrotron X-Ray Absorption Study of LiFePO[sub 4] Electrodes
  76. X-ray absorption spectroscopy study of the LixFePO4cathode during cycling using a novel electrochemicalin situreaction cell
  77. Structural Investigations of LiFePO4 Electrodes by Fe X-ray Absorption Spectroscopy
  78. Batteries, Overview
  79. Cu[sub 2]Sb Thin-Film Electrodes Prepared by Pulsed Laser Deposition for Lithium Batteries
  80. Diagnostic Analysis of Electrodes from High-Power Lithium-Ion Cells Cycled under Different Conditions
  81. Mechanism of Lithium Insertion into Magnesium Silicide
  82. Influence of Substitution on the Structure and Electrochemistry of Layered Manganese Oxides
  83. Electrochemicalin situreaction cell for X-ray scattering, diffraction and spectroscopy
  84. Amorphous and nanocrystalline Mg2Si thin-film electrodes
  85. Sulfur-Doped Aluminum-Substituted Manganese Oxide Spinels for Lithium-Ion Battery Applications
  86. Electrochemical Studies of Nanoncrystalline Mg[sub 2]Si Thin Film Electrodes Prepared by Pulsed Laser Deposition
  87. An Electrochemical and XRD Study of Lithium Insertion into Mechanically Alloyed Magnesium Stannide
  88. Origin of chemical shift of manganese in lithium battery electrode materials—a comparison of hard and soft X-ray techniques
  89. Direct Electroplating of Lithium Cobalt Oxide Film on Platinum Substrate in 100°–200°C Aqueous Solution
  90. Magnesium silicide as a negative electrode material for lithium-ion batteries
  91. 7Li NMR Studies of Chemically-Delithiated Li1-xCoO2
  92. Hyperfine Fields at the Li Site in LiFePO4-Type Olivine Materials for Lithium Rechargeable Batteries:  A 7Li MAS NMR and SQUID Study
  93. The Lithium/Sulfur Rechargeable Cell
  94. The Influence of Covalence on Capacity Retention in Metal-Substituted Spinels
  95. A [sup 7]Li NMR Study of Capacity Fade in Metal-Substituted Lithium Manganese Oxide Spinels
  96. [sup 7]Li and [sup 31]P Magic Angle Spinning Nuclear Magnetic Resonance of LiFePO[sub 4]-Type Materials
  97. Impedance Studies of the Thin Film LiMn[sub 2]O[sub 4]/Electrolyte Interface
  98. Electrochemical characteristics of Pt–WO3/C and Pt–TiO2/C electrocatalysts in a polymer electrolyte fuel cell
  99. In situ anomalous small angle X-ray scattering and absorption on an operating rechargeable lithium ion battery cell
  100. A [sup 7]Li Nuclear Magnetic Resonance Study of Metal-Substituted Lithium Manganese Oxide Spinels
  101. Nuclear Magnetic Resonance and Voltammetry Studies of Carbon Monoxide Adsorption and Oxidation on a Carbon-Supported Platinum Fuel Cell Electrocatalyst
  102. A [sup 7]Li Nuclear Magnetic Resonance Study of Metal-Substituted Lithium Manganese Oxide Spinels [Journal of The Electrochemical Society, 148, A951 (2001)]
  103. Diagnostic Characterization of High Power Lithium-Ion Batteries for Use in Hybrid Electric Vehicles
  104. Fuel Cells
  105. Electronic Structure of Chemically-Prepared LixMn2O4 Determined by Mn X-ray Absorption and Emission Spectroscopies
  106. Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
  107. Correlating Electronic Structure with Cycling Performance of Substituted LiMn2O4Electrode Materials:  A Study Using the Techniques of Soft X-ray Absorption and Emission
  108. Investigation of anion adsorption on platinum electrodes in aqueous media by probe beam deflection
  109. Structural Investigations of Li[sub 1.5+x]Na[sub 0.5]MnO[sub 2.85]I[sub 0.12] Electrodes by Mn X-Ray Absorption Near Edge Spectroscopy
  110. Chapter 6. Electrochemical energy storage
  111. Electrochemical Studies of Substituted Spinel Thin Films
  112. Supertransferred Hyperfine Fields at7Li:  Variable Temperature7Li NMR Studies of LiMn2O4-Based Spinels
  113. Characterization of pulsed laser-deposited LiMn2O4 thin films for rechargeable lithium batteries
  114. Investigations of a New Family of Alkaline−Fluoride−Carbonate Electrolytes for Zinc/Nickel Oxide Cells
  115. Cyclic Voltammetry of Pulsed Laser Deposited Li[sub x]Mn[sub 2]O[sub 4] Thin Films
  116. Mass Transport in Gas-Diffusion Electrodes: A Diagnostic Tool for Fuel-Cell Cathodes
  117. FTIR spectroscopy of metal oxide insertion materials: Analysis of LixMn2O4 spinel electrodes
  118. Announcement—Refereeing policy
  119. Announcement—refereeing policy
  120. Novel Nanodisperse Composite Cathode for Rechargeable Lithium/Polymer Batteries
  121. Thermal Treatment of La[sub 0.6]Ca[sub 0.4]CoO[sub 3] Perovskites for Bifunctional Air Electrodes
  122. Corrigendum to “ftir characterization of peo + lin( cf3so2) 2 electrolytes”
  123. Energy conversion & storage program. 1995 annual report
  124. FTIR characterization of PEO + LiN(CF3SO2)2 electrolytes
  125. Development of lightweight nickel electrodes for zinc/nickel oxide cells
  126. Quantitative Solid-State NMR Spectra of CO Adsorbed from Aqueous Solution onto a Commercial Electrode
  127. Electrochemical Behavior of LiMn[sub 2]O[sub 4] and LiCoO[sub 2] Thin Films Produced with Pulsed Laser Deposition
  128. FTIR Spectroscopy of Metal Oxide Insertion Electrodes
  129. Infrared Photothermal Deflection Spectroscopy: A New Probe for the Investigation of Electrochemical Interfaces
  130. Sodium/Phosphorus-Sulfur Cells
  131. Sodium/Phosphorus-Sulfur Cells
  132. Steady-state model for an oxygen fuel cell electrode with an aqueous carbonate electrolyte
  133. Application of probe beam deflection to study the electrooxidation of copper in alkaline media
  134. Degradation mechanisms of nickel oxide electrodes in zinc/nickel oxide cells with low-zinc-solubility electrolytes
  135. Energy conversion & storage program. 1994 annual report
  136. Direct Anodic Oxidation of Methanol on Supported Platinum/Ruthenium Catalyst in Aqueous Cesium Carbonate
  137. Visual Observations of Early Shape Changes in a Zinc/Nickel Oxide Cell
  138. Electro-oxidation of small organic molecules on well-characterized PtRu alloys
  139. Energy Conversion & Storage Program, 1993 annual report
  140. Laboratory-scale evaluation of secondary alkaline zinc batteries for electric vehicles
  141. The effect of zinc ions on the platinum electrode in alkaline solutions
  142. Carbon monoxide electrooxidation on well-characterized platinum-ruthenium alloys
  143. Temperature-Dependent Methanol Electro-Oxidation on Well-Characterized Pt-Ru Alloys
  144. THE PLANARITY PROBLEM FOR SIGNED GAUSS WORDS
  145. Effect of the supporting electrolyte and beam diameter on probe beam deflection experiments
  146. Methanol electrooxidation on well-characterized platinum-ruthenium bulk alloys
  147. LEIS and AES on sputtered and annealed polycrystalline Pt-Ru bulk alloys
  148. Low-Zinc-Solubility Electrolytes for Use in Zinc/Nickel Oxide Cells
  149. The Dependence of Aqueous Sulfur-Polysulfide Redox Potential on Electrolyte Composition and Temperature
  150. Development of long-lived high-performance zinc-calcium/nickel oxide cells
  151. Aqueous polysulphide flow-through electrodes: Effects of electrocatalyst and electrolyte composition on performance
  152. Energy Conversion and Storage Program
  153. Investigation of low-zinc-solubility electrodes and electrolytes in zinc/silver oxide cells
  154. Mechanistic investigations of redox polymer-coated electrodes using probe-beam deflection and cyclic voltammetry
  155. Experimental and Theoretical Study of Concentration Distributions in a Model Pore Electrode
  156. Experimental and Theoretical Study of Concentration Distributions in a Model Pore Electrode
  157. The Secondary Alkaline Zinc Electrode
  158. Current Density and ZnO Precipitation-Dissolution Distributions in Zn-ZnO Porous Electrodes and Their Effect on Material Redistribution: A Two-Dimensional Mathematical Model
  159. Fuel Cell Cathode Studies in Aqueous K[sub 2]CO[sub 3] and KOH
  160. Oxygen Reduction on Pt in Aqueous K[sub 2]CO[sub 3] and KOH
  161. Zinc Electrode Rest Potentials in Concentrated KOH-K[sub 2]Zn(OH)[sub 4] Electrolytes
  162. Solution processes in photoelectrochemical cells
  163. Response to “Comment on ‘Licht's Comment on Kinetics of Aqueous Polysulfide Solutions, Part I’” [J. Electrochem. Soc., 133, 2510]
  164. The corrosion of some metals in sulfur-polysulfide melts
  165. The effect of pulse charging on the cycle-life performance of zinc/nickel oxide cells
  166. The reaction order for oxygen reduction in TFMSA on Pt
  167. Kinetics of Aqueous Polysulfide Solutions
  168. Probe Beam Deflection for in situ Measurements of Concentration and Spectroscopic Behavior during Copper Oxidation and Reduction
  169. Kinetics of Aqueous Polysulfide Solutions
  170. Kinetics of Aqueous Polysulfide Solutions
  171. Voltammetry of Lithium Polysulfides at Metal Electrodes
  172. Voltammetry of Sodium Polysulfides at Metal Electrodes
  173. ZINC ELECTRODE CYCLE-LIFE PERFORMANCE IN ALKALINE ELECTROLYTES HAVING REDUCED ZINC SPECIES SOLUBILITY
  174. ZINC ELECTRODE CYCLE-LIFE PERFORMANCE IN ALKALINE ELECTROLYTES HAVING REDUCED ZINC SPECIES SOLUBILITY
  175. Oxygen Reduction in Tetrafluoroethane-1,2-Disulfonic Acid
  176. Computer-controlled multiple-channel system for electrochemical experiments
  177. Batteries
  178. Batteries of the Future for Vehicle Applications
  179. Future Trends in Advanced Batteries for Automobile Propulsion
  180. Secondary Batteries—New Batteries: High Temperature
  181. Electrochemical Power for Transportation
  182. ENERGY& ENVIRONMENT DIVISION ANNUAL REPORT 1979
  183. Requirements of Battery Systems
  184. Compatibility of Aluminum Nitride in Environments Representative of High Temperature Cells
  185. An Evaluation of Alternative Power Sources for Low-Emission Automobiles
  186. Physics Opportunities in Electrochemical Energy Conversion
  187. Phase Equilibria in Lithium-Chalcogen Systems
  188. Phase Diagram of the Pseudoternary System Li[sub 2]Se-Se-(LiBr-RbBr Eutectic)
  189. Thermodynamic Studies of the Lithium-Selenium System by an EMF Method
  190. Phase Equilibria in Lithium-Chalcogen Systems
  191. Structural studies of magnesium halide-potassium halide melts by Raman spectroscopy
  192. Phase Equilibria in Lithium-Chalcogen Systems
  193. Raman Spectra of Fused Carbonates
  194. Phase diagrams of the systems LiI-KI and LiI-RbI
  195. Raman spectrum and vibrational analysis for gaseous aluminum chloride
  196. High-Temperature Batteries
  197. Increased irreversibility caused by composition changes in fuel cells
  198. The Performance of Direct Ammonia Fuel Cells
  199. Secondary Cells with Lithium Anodes and Immobilized Fused-Salt Electrolytes
  200. Ammonia–Oxygen Fuel Cell
  201. Electrocatalysts for the Direct Electrochemical Oxidation of n-Octane in Fuel Cells
  202. The Kinetics of Adsorption, Surface Reaction, and Electrochemical Oxidation of Propane on Platinum in Hydrofluoric Acid
  203. Molten and Solid Lithium Hydride as an Ionized Solvent for Other Ionic Salts
  204. Anodic Oxidation and Molecular Structure: Influence on Performance of Normal Saturated Hydrocarbons in Fuel Cells
  205. The Kinetics of Propane Adsorption on Platinum in Hydrofluoric Acid
  206. The Transport of Hydrogen to Cylindrical Anodes in Stirred Electrolytes
  207. High Activity Platinum Electrocatalysts for the Direct Anodic Oxidation of Saturated Hydrocarbons
  208. ``Hydrogen Overvoltage and Electrode Materials.'' Comments
  209. High-Performance Hydrocarbon Fuel Cells with Fluoride Electrolytes
  210. Purification and preparation of some caesium compounds
  211. Hydrocarbon Fuel Cells with Fluoride Electrolytes
  212. Sensitive Voltage Measurement and Recording System
  213. Carbon Deposition Boundaries in the CHO System at Several Pressures.
  214. A Methanol Fuel Cell with an Invariant Alkaline Electrolyte
  215. Thermodynamics of Hydrocarbon Fuel Cells
  216. Sensitive Thermal Analysis Establishing Formation of the Incongruently Melting Compound LiNaCO3
  217. Performance of fractional watt ion exchange membrane fuel cells
  218. Macroscopic mixing in fluidization
  219. Longitudinal mixing in fluidization
  220. Longitudinal mixing in packed beds
  221. Kinetics of the Hydrolysis of Acetyl Chloride
  222. Velocity Profiles in Packed and Fluidized Beds