All Stories

  1. An Improved Omega-Based Method for Creep Life Prediction Using Hyperbolic Sine Stress Correlation

    Article • Key Engineering Materials, March 2019, Trans Tech Publications

    Professor sean b leen

  2. Multi-scale fatigue, fracture and damage of materials in harsh environments at NUI Galway, Ireland

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, December 2018, SAGE Publications

    Professor sean b leen

  3. The effect of inclusions on the high-temperature low-cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 2018, Wiley

    Professor sean b leen

  4. Effect of pre-corrosion on damage evolution and crack propagation in aluminum alloy 7050-T7651

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 2018, Wiley

    Professor sean b leen

  5. The effect of ferrite phases on the micromechanical response and crack initiation in the intercritical heat-affected zone of a welded 9Cr martensitic steel

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2018, Wiley

    Professor sean b leen

  6. Global and local fatigue analysis of X100 and X60 steel catenary riser girth welds

    Article • Journal of Structural Integrity and Maintenance, July 2017, Taylor & Francis

    Professor sean b leen

  7. Cyclic plasticity of welded P91 material for simple and complex power plant connections

    Article • International Journal of Fatigue, June 2016, Elsevier

    Professor sean b leen

  8. Micromechanical finite element modelling of thermo-mechanical fatigue for P91 steels

    Article • International Journal of Fatigue, June 2016, Elsevier

    Professor sean b leen

  9. High-Temperature Low-Cycle Fatigue Behavior of MarBN at 600 °C

    Article • Journal of Pressure Vessel Technology, April 2016, ASME International

    Professor sean b leen, Ms Eimear M O'Hara

  10. Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing

    Article • Journal of Pressure Vessel Technology, February 2016, ASME International

    Professor sean b leen

  11. Microscale deformation of a tempered martensite ferritic steel: Modelling and experimental study of grain and sub-grain interactions

    Article • Journal of the Mechanics and Physics of Solids, January 2016, Elsevier

    Professor sean b leen

  12. High Temperature Low Cycle Fatigue Behaviour of MarBN at 600 °C

    Article • July 2015, ASME International

    Professor sean b leen, Ms Eimear M O'Hara

  13. High Temperature, Multi-Material, Cyclic Plasticity of a P91 Welded Branch-Header Connection Under Cyclic Pressure

    Article • July 2015, ASME International

    Professor sean b leen

  14. Finite element based damage assessment of composite tidal turbine blades

    Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

    Professor sean b leen

  15. Porosity-Based Corrosion Model for Alkali Halide Ash Deposits during Biomass Co-firing

    Article • Energy & Fuels, May 2015, American Chemical Society (ACS)

    Professor sean b leen

  16. The effect of grain orientation on fretting fatigue plasticity and life prediction

    Article • Tribology International, August 2014, Elsevier

    Professor sean b leen

  17. Micro-mechanical modelling of fretting fatigue crack initiation and wear in Ti–6Al–4V

    Article • International Journal of Fatigue, May 2014, Elsevier

    Professor sean b leen

  18. Void distributions and permeability prediction for rotationally moulded polymers

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, March 2014, SAGE Publications

    Professor sean b leen

  19. Experimental characterisation for micromechanical modelling of CoCr stent fatigue

    Article • Biomaterials, January 2014, Elsevier

    Professor sean b leen

  20. A multiaxial fatigue damage model for fibre reinforced polymer composites

    Article • Composite Structures, December 2013, Elsevier

    Professor sean b leen

  21. Optimizing the design of a bioabsorbable metal stent using computer simulation methods

    Article • Biomaterials, November 2013, Elsevier

    Professor sean b leen

  22. Finite element simulation of fretting wear and fatigue in thin steel wires

    Article • International Journal of Fatigue, October 2013, Elsevier

    Professor sean b leen

  23. A finite element methodology for wear–fatigue analysis for modular hip implants

    Article • Tribology International, September 2013, Elsevier

    Professor sean b leen

  24. Design of composite tidal turbine blades

    Article • Renewable Energy, September 2013, Elsevier

    Professor sean b leen

  25. Microstructure-sensitive prediction and experimental validation of fretting fatigue

    Article • Wear, July 2013, Elsevier

    Professor sean b leen

  26. Finite element modelling of brittle fracture of thick coatings under normal and tangential loading

    Article • Tribology International, February 2013, Elsevier

    Professor sean b leen

  27. Finite Element Modelling of the Thermo-Mechanical Behaviour of a 9Cr Martensitic Steel

    Article • January 2013, Springer Science + Business Media

    Professor sean b leen

  28. New Strategy for the Prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083 Aluminium Alloy

    Article • Materials Science Forum, December 2012, Trans Tech Publications

    Professor sean b leen

  29. Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue

    Article • International Journal of Fatigue, November 2012, Elsevier

    Professor sean b leen

  30. Computational study on the effect of contact geometry on fretting behaviour

    Article • Wear, July 2011, Elsevier

    Professor sean b leen

  31. Gross slip fretting wear performance of a layered thin W-DLC coating: Damage mechanisms and life modelling

    Article • Wear, July 2011, Elsevier

    Professor sean b leen

  32. A finite element study of microstructure-sensitive plasticity and crack nucleation in fretting

    Article • Computational Materials Science, June 2011, Elsevier

    Professor sean b leen

  33. Simple parameters to predict effect of surface damage on fretting fatigue

    Article • International Journal of Fatigue, March 2011, Elsevier

    Professor sean b leen

  34. A Study on the Fatigue Life of Glass Reinforced Polymer Composites for Tidal Turbine Blades

    Article • January 2011, ASME International

    Professor sean b leen

  35. The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems

    Article • Tribology International, October 2010, Elsevier

    Professor sean b leen

  36. Finite Element Modelling and Experimental Testing of Thermomechanical Behaviour and Failure of Titanium Superplastic Forming Dies

    Article • Key Engineering Materials, June 2010, Trans Tech Publications

    Professor sean b leen

  37. Thermo-Mechanical Analysis and Lifing of Ni-Cr SPF Tool

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Professor sean b leen

  38. A Finite Element Analysis of Errors in Axisymmetricisothermal and Gleeble Compression Testing of Ti-6Al-4V

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Professor sean b leen

  39. Finite Element Prediction of Creep-Plastic Ratchetting and Low Cycle Creep-Fatigue for a Large SPF Tool

    Article • Journal of Materials Engineering and Performance, March 2010, Springer Science + Business Media

    Professor sean b leen

  40. Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy

    Article • Journal of Manufacturing Science and Engineering, January 2010, ASME International

    Professor sean b leen

  41. Erratum: Experimental and Numerical Characterization of the Cyclic Thermomechanical Behavior of a High Temperature Forming Tool Alloy [ASME J. Manuf. Sci. Eng., 2010, 132, p. 051013]

    Article • Journal of Manufacturing Science and Engineering, January 2010, ASME International

    Professor sean b leen

  42. Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti–6Al–4V

    Article • Tribology International, December 2009, Elsevier

    Professor sean b leen

  43. Multiaxial fretting fatigue testing and prediction for splined couplings

    Article • International Journal of Fatigue, November 2009, Elsevier

    Professor sean b leen

  44. Finite element modelling of damage in superplastic forming of a titanium alloy

    Article • International Journal of Material Forming, August 2009, Springer Science + Business Media

    Professor sean b leen

  45. A study on the interaction between fretting wear and cyclic plasticity for Ti–6Al–4V

    Article • Wear, June 2009, Elsevier

    Professor sean b leen

  46. Characterisation of fretting-induced wear debris for Ti-6Al-4 V

    Article • Wear, June 2009, Elsevier

    Professor sean b leen

  47. A multiaxial fretting fatigue test for spline coupling contact

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2009, Wiley

    Professor sean b leen

  48. A multi-scale model for fretting wear with oxidation-debris effects

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, March 2009, SAGE Publications

    Professor sean b leen

  49. Experimental and Numerical Characterisation of the Cyclic Thermo-Mechanical Behaviour of a High Temperature Forming Tool Alloy

    Article • January 2009, ASME International

    Professor sean b leen

  50. An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris

    Article • January 2009, Springer Science + Business Media

    Professor sean b leen

  51. A combined wear and crack nucleation–propagation methodology for fretting fatigue prediction

    Article • International Journal of Fatigue, September 2008, Elsevier

    Professor sean b leen

  52. Finite element based predictions of life limiting behaviour for a large SPF tool

    Article • Materialwissenschaft und Werkstofftechnik, April 2008, Wiley

    Professor sean b leen

  53. Finite element simulation of fretting wear-fatigue interaction in spline couplings

    Article • Tribology - Materials Surfaces & Interfaces, March 2008, Taylor & Francis

    Professor sean b leen

  54. A Comparative Study of a Single Damage-Parameter Life Prediction Method and a Physically-Based Damage Mechanics Method

    Article • January 2008, ASME International

    Professor sean b leen

  55. A hybrid implicit—explicit finite element methodology for coating formation in the high-velocity oxy-fuel spraying process

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, October 2007, SAGE Publications

    Professor sean b leen

  56. A finite element based approach to simulating the effects of debris on fretting wear

    Article • Wear, September 2007, Elsevier

    Professor sean b leen

  57. The critical role of fretting wear in the analysis of fretting fatigue

    Article • Wear, September 2007, Elsevier

    Professor sean b leen

  58. Fretting fatigue predictions in a complex coupling

    Article • International Journal of Fatigue, July 2007, Elsevier

    Professor sean b leen

  59. The application of fretting wear modelling to a spline coupling

    Article • Wear, April 2007, Elsevier

    Professor sean b leen

  60. Contact-evolution based prediction of fretting fatigue life: Effect of slip amplitude

    Article • Wear, April 2007, Elsevier

    Professor sean b leen

  61. Improved Correlation of Measured and Predicted Hysteresis Loops in a Multiaxial Fretting Fatigue Test Rig for Spline Couplings

    Article • Applied Mechanics and Materials, January 2007, Trans Tech Publications

    Professor sean b leen

  62. Finite element-based life prediction for high-temperature cyclic loading of a large superplastic forming die

    Article • The Journal of Strain Analysis for Engineering Design, November 2006, SAGE Publications

    Professor sean b leen

  63. Towards the Modelling of Fretting Wear and Fatigue Interaction in Spline Couplings

    Article • October 2006, CrossRef Test Account

    Professor sean b leen

  64. Finite-element-based methodology for predicting the thermo-mechanical behaviour of superplastic forming tools

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, July 2006, SAGE Publications

    Professor sean b leen

  65. Finite element modelling of the fracture behaviour of brittle coatings

    Article • Surface and Coatings Technology, May 2006, Elsevier

    Professor sean b leen

  66. Towards the Modelling of Fretting Wear and Fatigue Interaction in Spline Couplings

    Article • Applied Mechanics and Materials, January 2006, Trans Tech Publications

    Professor sean b leen

  67. Characterisation of a Simplified Aeroengine Casing Subjected to a Radial Loading Condition Using FE and Approximate Methods

    Article • January 2006, ASME International

    Professor sean b leen

  68. A simplified fretting test methodology for complex shaft couplings

    Article • Fatigue & Fracture of Engineering Materials & Structures, November 2005, Wiley

    Professor sean b leen

  69. Efficient Finite Element Modelling For Complex Shaft Couplings Under Non-Symmetric Loading

    Article • The Journal of Strain Analysis for Engineering Design, October 2005, SAGE Publications

    Professor sean b leen

  70. Simplified Methods for Prediction of Elastic-Plastic Behaviour of Complex Structures with Repeated Structural Units

    Article • September 2005, CrossRef Test Account

    Professor sean b leen

  71. Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations

    Article • International Journal of Fatigue, April 2005, Elsevier

    Professor sean b leen

  72. Design of a Multi-Axial Test Specimen for Fretting Fatigue in Splined Couplings

    Article • Applied Mechanics and Materials, January 2005, Trans Tech Publications

    Professor sean b leen

  73. Simplified Methods for Prediction of Elastic-Plastic Behaviour of Complex Structures with Repeated Structural Units

    Article • Key Engineering Materials, January 2005, Trans Tech Publications

    Professor sean b leen

  74. Measurement, analysis and prediction of fretting wear damage in a representative aeroengine spline coupling

    Article • Wear, December 2004, Elsevier

    Professor sean b leen

  75. Finite element simulation and experimental validation of fretting wear

    Article • Wear, June 2004, Elsevier

    Professor sean b leen

  76. The Measurement of Friction for Superplastic Forming of Ti-6Al-4V

    Article • Materials Science Forum, January 2004, Trans Tech Publications

    Professor sean b leen

  77. Parametric Study on the Frictional Contact Behaviour between Spline Teeth

    Article • Materials Science Forum, January 2003, Trans Tech Publications

    Professor sean b leen

  78. Simplified Method to Predict Elastic-Plastic Behaviour of Aeroengine Casings

    Article • Key Engineering Materials, January 2003, Trans Tech Publications

    Professor sean b leen

  79. An investigation of the fatigue and fretting performance of a representative aero-engine spline coupling

    Article • The Journal of Strain Analysis for Engineering Design, August 2002, SAGE Publications

    Professor sean b leen

  80. Macroscopic fretting variables in a splined coupling under combined torque and axial load

    Article • The Journal of Strain Analysis for Engineering Design, July 2001, SAGE Publications

    Professor sean b leen

  81. Combining Rapid Prototyping, Optical Field View Measurement Techniques and Finite Element Analysis to Test Structural Integrity of Tubular Joints

    Article • January 2000, Springer Science + Business Media

    Professor sean b leen

  82. An experimental and finite element study of the non-linear force-displacement characteristics of tubular YT-joints under combined axial loading

    Article • The Journal of Strain Analysis for Engineering Design, April 1999, SAGE Publications

    Professor sean b leen