All Stories

  1. Activation volume details from nonlinear anelastic deformation of a metallic glass
  2. A comprehensive atomistic analysis of the experimental dynamic-mechanical response of a metallic glass
  3. Atomistic interpretation of the dynamic response of glasses
  4. Room-temperature flow in a metallic glass – Strain-rate dependence of shear-band behavior
  5. An atomically quantized hierarchy of shear transformation zones in a metallic glass
  6. Plastic flow of a nanocrystalline/amorphous Al90Fe5Gd5 composite formed by rolling
  7. Grain-boundary relaxation and its effect on plasticity in nanocrystalline Fe
  8. Mechanically-assisted nanocrystallization and defects in amorphous alloys: A high-resolution transmission electron microscopy study
  9. Hafnium oxide production via laser ablation plasma deposition
  10. The Contribution of Grain-Boundary Activity to Plasticity in Nanocrystalline Fe - The Effect of Grain-Boundary Relaxation
  11. Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy
  12. Mechanical strength of nanocrystalline/amorphous Al90Fe5Gd5 composites produced by rolling
  13. Deformation-induced nanocrystallization: A comparison of two amorphous Al-based alloys
  14. Effect of Ion Irradiation on Microstructure and Hardness in Zircaloy-4
  15. Effect of Ion Irradiation on Microstructure and Hardness in Zircaloy-4
  16. The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5: a high-resolution transmission electron microscopy study
  17. Grain-size dependence of plastic deformation in nanocrystalline Fe
  18. Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation
  19. Mechanism of Irradiation Assisted Cracking of Core Components in Light Water Reactors
  20. Rate dependence of serrated flow in a metallic glass
  21. Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperature
  22. Metastable, Mechanically Alloyed and Nanocrystalline Materials (Proceedings of ISMANAM-2001)
  23. A Novel Approach to Materials Development for Advanced Reactor Systems - Quarterly Progress Report: Year 2; Quarter 1
  24. On the Coupling between Mechanical Behavior and Phase Stability in Mechanically Milled Alloy Powder
  25. On the Coupling between Mechanical Behavior and Phase Stability in Mechanically Milled Alloy Powder
  26. A Novel Approach to Materials Development for Advanced Reactor Systems. Annual Report for Year 1
  27. A Novel Approach to Materials Development for Advanced Reactor Systems. Quarterly Progress Report, Year 1; Quarter 4
  28. Isolation of Microstructure in Proton-Irradiated Steels. Topical Report
  29. A Novel Approach to Material Development for Advanced Reactor Systems
  30. Non-Monotonic Decomposition in the Immiscible Ag-Cu System
  31. Non-Monotonic Decomposition in the Immiscible Ag-Cu System
  32. Interdependence of stress and interdiffusion during solid-state amorphization in Ni–Hf
  33. A Novel Approach to Material Development for Advanced Reactor Systems
  34. Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materials
  35. Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materials
  36. Kinetics of microstructure evolution in nanocrystalline Fe powder during mechanical attrition
  37. Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball milling
  38. Temperature dependence of deformation-assisted crystallization in amorphous Fe78B13Si9
  39. Microchemistry of Proton-Irradiated Austenitic Alloys Under Conditions Relevant to Lwr Core Components
  40. Microstructural Evolution in Ball-Milled Iron Powder
  41. Reaction Rates and Stresses during Solid State Amorphization in Nickel-Hafnium Diffusion Couples
  42. Phase transformations induced by mechanical alloying in binary systems
  43. Interdiffusion and Stress Evolution During Solid-State Amorphization in Ni-Hf Thin-Film Diffusion Couples
  44. Quantitative analysis of radiation-induced grain-boundary segregation measurements
  45. Deformation Mechanisms in a Proton-Irradiated Austenitic Stainless Steel
  46. Effects of proton irradiation on the microstructure and microchemistry of type 304L stainless steel
  47. Thermodynamic properties of metastable Ag-Cu alloys
  48. Evidence for self-sustained MoSi2 formation during room-temperature high-energy ball milling of elemental powders
  49. Monte Carlo simulation of phase separation during thin-film codeposition
  50. Thermodynamic and magnetic properties of metastable FexCu100−x solid solutions formed by mechanical alloying
  51. Irradiation assisted stress corrosion cracking of controlled purity 304L stainless steels
  52. The effect of non-linear diffusion on solid state amorphization in Ni-Hf: experiment and simulation
  53. Enthalpies of formation and crystallization of amorphous Zr1-xAlx and Zr1-xNix alloys: calculations compared with measurements
  54. Stability and thermodynamic properties of supersaturated solid solution and amorphous phase formed by ball milling in the Zr- Al system
  55. Alloy Phase Growth by Nonlinear Diffusion
  56. Self-Sustained Reactions in Diffusion Couples with Interfacial Barriers
  57. The Limits of the Mean-Field Theory of Atomic Diffusion
  58. Phase separation during film growth
  59. Atzmon replies
  60. Phase separation during co-deposition of Al–Ge thin films
  61. ALLOY PHASE FORMATION BY MECHANICAL ALLOYING: CONSTRAINTS AND MECHANISMS
  62. Calorimetric Characterization of the Polymorphous Phase Diagram for Mechanically-Alloyed Zr-Al
  63. The effect of interfacial diffusion barriers on the ignition of self-sustained reactions in metal-metal diffusion couples
  64. Transition from lateral to transverse phase separation during film co-deposition
  65. Calorimetric evidence for polymorphous constraints on metastable Zr-Al phase formation by mechanical alloying
  66. Characterization of AlNi formed by a self-sustaining reaction during mechanical alloying
  67. Calculation and simulation of chemical-diffusion coefficients: The inadequacy of the mean-field theory
  68. In situ thermal observation of explosive compound-formation reaction during mechanical alloying
  69. Composition Dependence of Solid-State Amorphization Kinetics
  70. Phase Separation During Film Deposition
  71. Monte-Carlo simulations of spinodal ordering and decomposition in compositionally modulated alloys
  72. Al-Ge Phase Separation During Vapor Deposition
  73. Calculation and Simulation of Interdiffusion Coefficients and Ordering Kinetics in Binary Alloys.
  74. Interdiffusion in Short-Wavelength Modulated Materials Studied by Monte-Carlo Simulations
  75. Interdiffusion in Amorphous Compositionally Modulated Ni-Zr Thin Films
  76. Metallic Glass Formation by Solid State Diffusion Enactions
  77. Formation and characterization of amorphous erbium-based alloys prepared by near-isothermal cold-rolling of elemental composites
  78. A Study of Amorphous Erbium-Based Alloys Formed by Near-Isothermal Cold-Rolling of Elemental Composites
  79. Formation and growth of amorphous phases by solid-state reaction in elemental composites prepared by cold working
  80. Inelastic neutron scattering from amorphous hydride of Zr2Pd
  81. A cooling rate dependent structure of amorphous (AuxCu1−x)91La9