All Stories

  1. Exploring tensile properties of bio composites reinforced date palm fibers using experimental and Modelling Approaches

    Article • Materials Chemistry and Physics, February 2024, Elsevier

    Dr Mohammad Jawaid

  2. Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite

    Article • Biomass Conversion and Biorefinery, January 2024, Springer Science + Business Media

    Dr Mohammad Jawaid

  3. Effect of chitosan filler on the thermal and viscoelasticity properties of bio-epoxy/date palm fiber composites

    Article • Sustainable Chemistry and Pharmacy, December 2023, Elsevier

    Ts. Dr. Nurjannah Salim, Dr Mohammad Jawaid

  4. A review on alkaline sulfite anthraquinone methanol as an alternative pulping process for non-woody biomass

    Article • Biomass Conversion and Biorefinery, November 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  5. Performance of nanofibrillated cellulose with chitosan as a wet-end additive for paper applications

    Article • Industrial Crops and Products, November 2023, Elsevier

    Dr Mohammad Jawaid

  6. Progress in polymeric and metallic brake pads: A comprehensive review

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, October 2023, SAGE Publications

    Dr Mohammad Jawaid

  7. Dynamic mechanical and thermal properties of Flax/bio-phenolic/epoxy reinforced hybrid composites

    Article • Journal of King Saud University - Science, October 2023, Elsevier

    Dr Mohammad Jawaid

  8. Enhancing the properties of date palm fibre reinforced bio-epoxy composites with chitosan – Synthesis, mechanical properties, and dimensional stability

    Article • Journal of King Saud University - Science, October 2023, Elsevier

    Dr Mohammad Jawaid

  9. Modelling and optimization of the absorption rate of date palm fiber reinforced composite using response surface methodology

    Article • Alexandria Engineering Journal, September 2023, Elsevier

    Dr Mohammad Jawaid

  10. Supercritical fluid extraction of torch ginger: Encapsulation, metabolite profiling, and antioxidant activity

    Article • Journal of King Saud University - Science, July 2023, Elsevier

    Dr Mohammad Jawaid

  11. Evaluation of characterisation efficiency of natural fibre-reinforced polylactic acid biocomposites for 3D printing applications

    Article • Sustainable Materials and Technologies, July 2023, Elsevier

    Dr Mohammad Jawaid

  12. Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites

    Article • Polymers, June 2023, MDPI AG

    Dr Mohammad Jawaid

  13. Evolution of dielectric properties of Kevlar/epoxy laminated composites after hybridization by naturally woven Coco Nucifera sheaths

    Article • Journal of Composite Materials, June 2023, SAGE Publications

    Dr Mohammad Jawaid

  14. The Effect of Eggshell Fillers on the Physical, Mechanical, and Morphological Properties of Date palm Fibre Reinforced Bio-epoxy Composites

    Article • Journal of Polymers and the Environment, June 2023, Springer Science + Business Media

    Ts. Dr. Nurjannah Salim, Dr Mohammad Jawaid

  15. New cellulosic fibre from Spathes of male date for lightweight composite materials: extraction and characterization

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Dr Mohammad Jawaid

  16. Effects of alkaline treatment of Washingtonia mesh waste on the mechanical and physical properties of bio-mortar: experimental and prediction models

    Article • Biomass Conversion and Biorefinery, April 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  17. Effect of fiber surface treatment on the mechanical, morphological, and dynamic mechanical properties of palm petiole fiber/LLDPE composites

    Article • Biomass Conversion and Biorefinery, April 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  18. Dynamic and thermo-mechanical properties of polypropylene reinforced with date palm nano filler

    Article • Journal of King Saud University - Science, April 2023, Elsevier

    Dr Mohammad Jawaid

  19. Processing techniques on plastic waste materials for construction and building applications

    Article • Current Opinion in Green and Sustainable Chemistry, April 2023, Elsevier

    Dr Mohammad Jawaid

  20. Investigating the synergistic effect of olive trunk leaves powder and pineapple leaf fibers on the physical, tensile, and thermal properties of epoxy‐based composites

    Article • Polymer Composites, March 2023, Wiley

    Dr Mohammad Jawaid

  21. A Review on Eco-friendly Isolation of Lignin by Natural Deep Eutectic Solvents from Agricultural Wastes

    Article • Journal of Polymers and the Environment, March 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  22. Shape memory properties of epoxy with hybrid multi-walled carbon nanotube and montmorillonite nanoclay nanofiller

    Article • Polymer Bulletin, March 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  23. Physical, structural and thermal properties of bio-phenolic/epoxy polymers blends

    Article • Materials Today Communications, March 2023, Elsevier

    Dr Mohammad Jawaid

  24. Optimization of flexural properties and thermal conductivity of Washingtonia plant biomass waste biochar reinforced bio-mortar

    Article • Journal of Materials Research and Technology, March 2023, Elsevier

    Dr Mohammad Jawaid

  25. Fabrication and characterization of polylactic acid/natural fiber extruded composites

    Article • Polymer Engineering & Science, February 2023, Wiley

    Dr Mohammad Jawaid

  26. Benchmarking automotive nonwoven composites from date palm midrib and spadix fibers in comparison to commercial leaf fibers

    Article • Biomass Conversion and Biorefinery, February 2023, Springer Science + Business Media

    Dr Mohammad Jawaid

  27. Delignification’s effect on microcrystalline cellulose obtained from oil palm empty fruit bunch fibres

    Article • BioResources, January 2023, BioResources

    Dr Mohammad Jawaid

  28. Response Surface Methodology Optimization of Palm Rachis Biochar Content and Temperature Effects on Predicting Bio-Mortar Compressive Strength, Porosity and Thermal Conductivity

    Article • Journal of Natural Fibers, January 2023, Taylor & Francis

    Dr Mohammad Jawaid

  29. Evaluation of physical, mechanical, and thermal properties of woven kenaf/bio-epoxy composites

    Article • Journal of Industrial Textiles, January 2023, SAGE Publications

    Dr Mohammad Jawaid

  30. Synthesis and characterization of carboxymethyl cellulose from pineapple leaf and kenaf core biomass: a comparative study of new raw materials

    Article • Biomass Conversion and Biorefinery, December 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  31. Comparative study of long date palm (Phoenix dactylifera L.) midrib and spadix fibers with other commercial leaf fibers

    Article • Cellulose, December 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  32. Mechanical properties of cellulose‐based multiscale composites: A review

    Article • Polymer Composites, November 2022, Wiley

    Dr. R.A. Ilyas, Dr Mohammad Jawaid

  33. Flexural, Dynamic and Thermo-Mechanical Analysis of Pineapple Leaf Fiber/Epoxy Composites

    Article • Journal of Natural Fibers, November 2022, Taylor & Francis

    Dr Mohammad Jawaid

  34. Assessment of induced delamination drilling of natural fiber reinforced composites: a statistical analysis

    Article • Journal of Materials Research and Technology, November 2022, Elsevier

    Dr Mohammad Jawaid

  35. Flexural, impact and dynamic mechanical analysis of hybrid composites: Olive tree leaves powder/ pineapple leaf fibre/epoxy matrix

    Article • Journal of Materials Research and Technology, November 2022, Elsevier

    Dr Mohammad Jawaid

  36. Drilling performance prediction of HDPE/Washingtonia fiber biocomposite using RSM, ANN, and GA optimization

    Article • The International Journal of Advanced Manufacturing Technology, October 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  37. Thermal characterization of epoxy bilayer hybrid composites reinforced with kenaf and oil palm fibers

    Article • Polymer Composites, October 2022, Wiley

    Dr Mohammad Jawaid

  38. PBAT/PBS Blends Membranes Filled with Nanocrystalline Cellulose for Heavy Metal Ion Separation

    Article • Journal of Polymers and the Environment, September 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  39. Characterization and fabrication of poly(butylene adipate‐co‐terephthalate)/nanocrystalline cellulose composite membranes for heavy metal ion separation

    Article • Journal of Applied Polymer Science, September 2022, Wiley

    Dr Mohammad Jawaid

  40. A Review on Gypsum-Based Composites Reinforced With Palm Fibers in Construction Applications

    Article • International Journal of Thermophysics, September 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  41. Thermal degradation, visco-elastic and fire-retardant behavior of hybrid Cyrtostachys Renda/kenaf fiber-reinforced MWCNT-modified phenolic composites

    Article • Journal of Thermal Analysis and Calorimetry, September 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  42. Effect of Accelerated Weathering on the Thermal, Tensile, and Morphological Characteristics of Polypropylene/Date Nanofiller Composites

    Article • Materials, September 2022, MDPI AG

    Dr Mohammad Jawaid

  43. Water Absorption Behavior of Jute Fibers Reinforced HDPE Biocomposites: Prediction Using RSM and ANN Modeling

    Article • Journal of Natural Fibers, September 2022, Taylor & Francis

    Dr Mohammad Jawaid

  44. Development and characterization of fire retardant nanofiller from date palm biomass

    Article • Biomass Conversion and Biorefinery, August 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  45. Dimensional stability, density, void and mechanical properties of flax fabrics reinforced bio-phenolic/epoxy composites

    Article • Journal of Industrial Textiles, August 2022, SAGE Publications

    Dr Mohammad Jawaid

  46. Thermal and acoustic properties of silane and hydrogen peroxide treated oil palm/bagasse fiber based biophenolic hybrid composites

    Article • Polymer Composites, July 2022, Wiley

    Dr Mohammad Jawaid

  47. Tensile, Thermal and Physical Properties of Washightonia Trunk Fibres/Pineapple Fibre Biophenolic Hybrid Composites

    Article • Journal of Polymers and the Environment, July 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  48. Mechanical and thermal properties of flax/carbon/kevlar based epoxy hybrid composites

    Article • Polymer Composites, July 2022, Wiley

    Dr Mohammad Jawaid

  49. Mechanical, Morphological and Dynamic Mechanical Analysis of Pineapple Leaf/Washingtonia Trunk Fibres Based Biophenolic Hybrid Composites

    Article • Journal of Polymers and the Environment, June 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  50. Areca/synthetic fibers reinforced based epoxy hybrid composites for semi‐structural applications

    Article • Polymer Composites, June 2022, Wiley

    Dr Mohammad Jawaid

  51. Effect of alkali surface treatment and compatibilizer agent on tensile and morphological properties of date palm fibers‐based high density polyethylene biocomposites

    Article • Polymer Composites, June 2022, Wiley

    Dr Mohammad Jawaid

  52. Mechanical and physical properties analysis of olive biomass and bamboo reinforced epoxy-based hybrid composites

    Article • Biomass Conversion and Biorefinery, June 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  53. Structural, thermal, mechanical and physical properties of Washingtonia filifera fibres reinforced thermoplastic biocomposites

    Article • Materials Today Communications, June 2022, Elsevier

    Dr Mohammad Jawaid

  54. Performance Evaluation of Calcium Alkali-treated Oil Palm/Pineapple Fibre/Bio-phenolic Composites

    Article • Journal of Bionic Engineering, May 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  55. Development of encapsulated sage extract powder: Inter-comparison with commercially available powder for physical properties and metabolites composition

    Article • The Journal of Supercritical Fluids, May 2022, Elsevier

    Dr Mohammad Jawaid

  56. Preparation and characterization of lignin/nano graphene oxide/styrene butadiene rubber composite for automobile tyre application

    Article • International Journal of Biological Macromolecules, May 2022, Elsevier

    Dr Mohammad Jawaid

  57. Physical, thermal and tensile behaviour of 3D printed kenaf/PLA to suggest its usability for ankle–foot orthosis – a preliminary study

    Article • Rapid Prototyping Journal, March 2022, Emerald

    Dr Mohammad Jawaid

  58. Extraction and Characterization of a New Lignocellulosic Fiber from Yucca Treculeana L. Leaf as Potential Reinforcement for Industrial Biocomposites

    Article • Journal of Natural Fibers, March 2022, Taylor & Francis

    Dr Mohammad Jawaid

  59. Olive Cellulosic Fibre Based Epoxy Composites: Thermal and Dynamic Mechanical Properties

    Article • Journal of Natural Fibers, March 2022, Taylor & Francis

    Dr Mohammad Jawaid

  60. Improving the thermal properties of olive/bamboo fiber‐based epoxy hybrid composites

    Article • Polymer Composites, March 2022, Wiley

    Dr Mohammad Jawaid

  61. Crystalline nanocellulose based sustainable nanoscopic composite membrane production: removal of metal ions from water

    Article • Cellulose, March 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  62. Preparation of Styrene-Butadiene Rubber (SBR) Composite Incorporated with Collagen-Functionalized Graphene Oxide for Green Tire Application

    Article • Gels, March 2022, MDPI AG

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  63. A comparative assessment of chemical, mechanical, and thermal characteristics of treated oil palm/pineapple fiber/bio phenolic composites

    Article • Polymer Composites, February 2022, Wiley

    Dr Mohammad Jawaid

  64. Comparative study of flexural properties prediction of Washingtonia filifera rachis biochar bio-mortar by ANN and RSM models

    Article • Construction and Building Materials, February 2022, Elsevier

    Dr Mohammad Jawaid

  65. Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive

    Article • Polymer Bulletin, January 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  66. Bioepoxy based hybrid composites from nano-fillers of chicken feather and lignocellulose Ceiba Pentandra

    Article • Scientific Reports, January 2022, Springer Science + Business Media

    Dr Mohammad Jawaid

  67. Cellulose Nanocrystal from Washingtonia Fibre and Its Characterization

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2022, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  68. Fatigue and impact properties of 3D printed PLA reinforced with kenaf particles

    Article • Journal of Materials Research and Technology, January 2022, Elsevier

    Dr Mohammad Jawaid

  69. Sustainable kenaf/bamboo fibers/clay hybrid nanocomposites: properties, environmental aspects and applications

    Article • Journal of Cleaner Production, January 2022, Elsevier

    Dr Mohammad Jawaid

  70. Improvements in the thermal behaviour of date palm/bamboo fibres reinforced epoxy hybrid composites

    Article • Composite Structures, December 2021, Elsevier

    Dr Mohammad Jawaid

  71. Poly(lactic acid)/poly(butylene succinate) dual-layer membranes with cellulose nanowhisker for heavy metal ion separation

    Article • International Journal of Biological Macromolecules, December 2021, Elsevier

    Dr Mohammad Jawaid

  72. Sugarcane wastes into commercial products: Processing methods, production optimization and challenges

    Article • Journal of Cleaner Production, December 2021, Elsevier

    Dr Mohammad Jawaid

  73. Sustainable Durio zibethinus-Derived Biosorbents for Congo Red Removal from Aqueous Solution: Statistical Optimization, Isotherms and Mechanism Studies

    Article • Sustainability, November 2021, MDPI AG

    Dr Mohammad Jawaid

  74. Lignocellulosic fiber reinforced composites: Progress, performance, properties, applications, and future perspectives

    Article • Polymer Composites, November 2021, Wiley

    Dr Mohammad Jawaid

  75. Antimicrobial Potential of Plastic Films Incorporated with Sage Extract on Chicken Meat

    Article • Foods, November 2021, MDPI AG

    Dr Mohammad Jawaid

  76. Effect of Cyrtostachys renda Fiber Loading on the Mechanical, Morphology, and Flammability Properties of Multi-Walled Carbon Nanotubes/Phenolic Bio-Composites

    Article • Nanomaterials, November 2021, MDPI AG

    Dr Mohammad Jawaid

  77. Olive fiber reinforced epoxy composites: Dimensional Stability, and mechanical properties

    Article • Polymer Composites, November 2021, Wiley

    Dr Mohammad Jawaid

  78. Development of Cd (II) Ion Probe Based on Novel Polyaniline-Multiwalled Carbon Nanotube-3-aminopropyltriethoxylsilane Composite

    Article • Membranes, November 2021, MDPI AG

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  79. Advancement in fiber reinforced polymer, metal alloys and multi-layered armour systems for ballistic applications – A review

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Mohammad Jawaid

  80. Mechanical and physical performance of date palm/bamboo fibre reinforced epoxy hybrid composites

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Mohammad Jawaid

  81. Effect of tetraethoxysilane on the dimensional stability and static bending properties of nanocellulose, tannin, and activated carbon mixed with epoxy resin

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Mohammad Jawaid

  82. Energy security index of Pakistan (ESIOP)

    Article • Energy Strategy Reviews, November 2021, Elsevier

    Dr Mohammad Jawaid

  83. Flexural and Dynamic Mechanical Properties of Alkali-Treated Coir/Pineapple Leaf Fibres Reinforced Polylactic Acid Hybrid Biocomposites

    Article • Journal of Bionic Engineering, November 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  84. Mathematical Modelling of Infra-Red Evaporation Characteristics of Wheat Straw Black Liquor

    Article • Pertanika Journal of Science and Technology, October 2021, Universiti Putra Malaysia

    Dr Mohammad Jawaid

  85. Sage biomass powders by supercritical fluid extraction and hydro-distillation techniques: a comparative study of biological and chemical properties

    Article • Biomass Conversion and Biorefinery, October 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  86. Development of Pulp Moulded Packaging Samples from Empty Fruit Bunch Fibre

    Article • Pertanika Journal of Science and Technology, October 2021, Universiti Putra Malaysia

    Dr Mohammad Jawaid

  87. Efficacy of Biopolymer/Starch Based Antimicrobial Packaging for Chicken Breast Fillets

    Article • Foods, October 2021, MDPI AG

    Dr Mohammad Jawaid

  88. Physical, Mechanical, and Morphological Properties of Hybrid Cyrtostachys renda/Kenaf Fiber Reinforced with Multi-Walled Carbon Nanotubes (MWCNT)-Phenolic Composites

    Article • Polymers, October 2021, MDPI AG

    Dr Mohammad Jawaid

  89. Efficient Synthesis and Characterization of Polyaniline@Aluminium–Succinate Metal-Organic Frameworks Nanocomposite and Its Application for Zn(II) Ion Sensing

    Article • Polymers, September 2021, MDPI AG

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  90. Low-Velocity Impact Analysis of Pineapple Leaf Fiber (PALF) Hybrid Composites

    Article • Polymers, September 2021, MDPI AG

    Dr Mohammad Jawaid

  91. Nanocrystalline Cellulose from Microcrystalline Cellulose of Date Palm Fibers as a Promising Candidate for Bio-Nanocomposites: Isolation and Characterization

    Article • Materials, September 2021, MDPI AG

    Dr Mohammad Jawaid

  92. A comparative evaluation of chemical, mechanical, and thermal properties of oil palm fiber/pineapple fiber reinforced phenolic hybrid composites

    Article • Polymer Composites, September 2021, Wiley

    Dr Mohammad Jawaid

  93. Extraction of Microcrystalline Cellulose from Washingtonia Fibre and Its Characterization

    Article • Polymers, September 2021, MDPI AG

    Dr Mohammad Jawaid

  94. Mechanical Performance of Granite Fine Fly Dust-Filled Basalt/Glass Polyurethane Polymer Hybrid Composites

    Article • Polymers, September 2021, MDPI AG

    Dr Mohammad Jawaid

  95. Assessment and detection of the potential contaminants from oil palm empty fruit bunch fiber-based biodegradable tray

    Article • Food Packaging and Shelf Life, September 2021, Elsevier

    Dr Mohammad Jawaid

  96. Effect of pH, temperature, and solids content on rheological properties of wheat straw black liquor

    Article • Biomass Conversion and Biorefinery, August 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  97. Novel Aminosilane (APTES)-Grafted Polyaniline@Graphene Oxide (PANI-GO) Nanocomposite for Electrochemical Sensor

    Article • Polymers, July 2021, MDPI AG

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  98. Characterization of physical and mechanical properties of recycled jute fabric reinforced polypropylene composites

    Article • Polymer Composites, July 2021, Wiley

    Dr Mohammad Jawaid

  99. A numerical failure analysis of laser micromachining in various thermoplastics

    Article • The International Journal of Advanced Manufacturing Technology, July 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  100. Crashworthiness Response of Filament Wound Kenaf/Glass Fibre-reinforced Epoxy Composite Tubes with Influence of Stacking Sequence under Intermediate-velocity Impact Load

    Article • Fibers and Polymers, July 2021, Springer Science + Business Media

    Dr. R.A. Ilyas, Dr Mohammad Jawaid

  101. Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

    Article • Journal of Polymers and the Environment, July 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  102. Extraction of nanocellulose from sugarcane bagasse and its characterization for potential applications

    Article • Polymer Composites, July 2021, Wiley

    Dr Mohammad Jawaid

  103. Structural, Morphological and Thermal Properties of Nano Filler Produced from Date Palm-Based Micro Fibers (Phoenix dactylifera L.)

    Article • Journal of Polymers and the Environment, July 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  104. Characterization of Active Polybutylene Succinate Films Filled Essential Oils for Food Packaging Application

    Article • Journal of Polymers and the Environment, July 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  105. Effect of surface modified date palm fibre loading on mechanical, thermal properties of date palm reinforced phenolic composites

    Article • Composite Structures, July 2021, Elsevier

    Dr Mohammad Jawaid

  106. Structural, Morphological and thermal properties of Nano filler Produced from Date Palm-based Micro Fibers (Phoenix Dactylifera L.)

    Article • June 2021, Research Square

    Dr Mohammad Jawaid

  107. Isolation and Production of Nanocrystalline Cellulose from Conocarpus Fiber

    Article • Polymers, June 2021, MDPI AG

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  108. Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

    Article • Nanomaterials, June 2021, MDPI AG

    Dr Mohammad Jawaid

  109. Fabrication of Reproducible and Selective Ammonia Vapor Sensor-Pellet of Polypyrrole/Cerium Oxide Nanocomposite for Prompt Detection at Room Temperature

    Article • Polymers, May 2021, MDPI AG

    Dr Mohammad Jawaid

  110. Evaluation of Thermal and Acoustic Properties of Oil Palm Empty Fruit Bunch/Sugarcane Bagasse Fibres Based Hybrid Composites for Wall Buildings Thermal Insulation

    Article • Fibers and Polymers, May 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  111. Effect of Curing Temperature on Mechanical Properties of Bio-Phenolic/Epoxy Polymer Blends

    Article • May 2021, Research Square

    Dr Mohammad Jawaid

  112. Natural Fibre-Reinforced Composite for Ballistic Applications: A Review

    Article • Journal of Polymers and the Environment, May 2021, Springer Science + Business Media

    Dr Ganiyat Olusola Adebayo, Dr Mohammad Jawaid

  113. Advancement in Graphene-Based Materials and Their Nacre Inspired Composites for Armour Applications—A Review

    Article • Nanomaterials, May 2021, MDPI AG

    Dr Mohammad Jawaid

  114. Preparation, Characterization and Properties of Biodegradable Composites from Bamboo Fibers—Mechanical and Morphological Study

    Article • Journal of Polymers and the Environment, April 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  115. Extraction and Characterization of Fiber Treatment Inula viscosa Fibers as Potential Polymer Composite Reinforcement

    Article • Journal of Polymers and the Environment, April 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  116. Physico‐mechanical and Flammability Properties of Cyrtostachys renda Fibers Reinforced Phenolic Resin Bio-composites

    Article • Journal of Polymers and the Environment, April 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  117. Comparative Study of Mechanical Properties of Chemically Treated and Untreated Cyrtostachys Renda Fibers

    Article • Journal of Natural Fibers, April 2021, Taylor & Francis

    Dr Mohammad Jawaid

  118. Compressive, dynamic and thermo-mechanical properties of cellulosic pineapple leaf fibre/polyester composites: Influence of alkali treatment on adhesion

    Article • International Journal of Adhesion and Adhesives, April 2021, Elsevier

    Dr Mohammad Jawaid

  119. Bamboo Fiber Based Cellulose Nanocrystals/Poly(Lactic Acid)/Poly(Butylene Succinate) Nanocomposites: Morphological, Mechanical and Thermal Properties

    Article • Polymers, March 2021, MDPI AG

    Dr Mohammad Jawaid

  120. Wear Properties of Nanoclay Modified Basalt Fibre Composites Under Dry Adhesive Sliding, Two-body Abrasive and Slurry Pot Erosive

    Article • March 2021, Research Square

    Dr Mohammad Jawaid

  121. Biodegradable composites from bamboo Fibers - Mechanical and Morphological Study

    Article • March 2021, Research Square

    Dr Mohammad Jawaid

  122. Effects of oil palm and montmorillonite nanofillers on stiffness and interfacial adhesion of kenaf/epoxy hybrid nanocomposites

    Article • Polymer Composites, March 2021, Wiley

    Dr Mohammad Jawaid

  123. Effect of surface treatment on mechanical, physical and morphological properties of oil palm/bagasse fiber reinforced phenolic hybrid composites for wall thermal insulation application

    Article • Construction and Building Materials, March 2021, Elsevier

    Dr Mohammad Jawaid

  124. Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites

    Article • Composite Structures, March 2021, Elsevier

    Dr Mohammad Jawaid

  125. Effect of Nanofiller Content on Dynamic Mechanical and Thermal Properties of Multi-Walled Carbon Nanotube and Montmorillonite Nanoclay Filler Hybrid Shape Memory Epoxy Composites

    Article • Polymers, February 2021, MDPI AG

    Dr Mohammad Jawaid

  126. Extraction and Characterization of Fiber Treatment Inula Viscosa Fibers as Potential Polymer Composite Reinforcement

    Article • February 2021, Research Square

    Dr Mohammad Jawaid

  127. Optimization and empirical modelling of physical ‎properties of hydrothermally treated ‎oil ‎palm wood in ‎different ‎buffered media using ‎response ‎surface ‎methodology

    Article • BioResources, February 2021, BioResources

    Dr Mohammad Jawaid

  128. Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends

    Article • Molecules, February 2021, MDPI AG

    Dr Mohammad Jawaid

  129. Effect of Wear Conditions, Parameters and Sliding Motions on Tribological Characteristics of Basalt and Glass Fibre Reinforced Epoxy Composites

    Article • Materials, February 2021, MDPI AG

    Dr Mohammad Jawaid

  130. Morphology, Structural, Thermal, and Tensile Properties of Bamboo Microcrystalline Cellulose/Poly(Lactic Acid)/Poly(Butylene Succinate) Composites

    Article • Polymers, February 2021, MDPI AG

    Dr Mohammad Jawaid

  131. New Cellulosic Fibers from Washingtonia Tree Agro-wastes: Structural, Morphological, and Thermal Properties

    Article • Journal of Natural Fibers, February 2021, Taylor & Francis

    Dr Mohammad Jawaid

  132. Potential of oil palm empty fruit bunch (OPEFB) and sugarcane bagasse fibers for thermal insulation application – A review

    Article • Construction and Building Materials, February 2021, Elsevier

    Dr Mohammad Jawaid

  133. Effects of Nanoclay on Mechanical and Dynamic Mechanical Properties of Bamboo/Kenaf Reinforced Epoxy Hybrid Composites

    Article • Polymers, January 2021, MDPI AG

    Dr Mohammad Jawaid

  134. Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

    Article • Polymers, January 2021, MDPI AG

    Dr Mohammad Jawaid

  135. Morphological, Structural, Thermal, Permeability, and Antimicrobial Activity of PBS and PBS/TPS Films Incorporated with Biomaster-Silver for Food Packaging Application

    Article • Polymers, January 2021, MDPI AG

    Dr Mohammad Jawaid

  136. Fabrication and Characterization of Novel Poly(d-Lactic Acid) Nanocomposite Membrane for Water Filtration Purpose

    Article • Nanomaterials, January 2021, MDPI AG

    Dr Mohammad Jawaid

  137. Abrasive Wear Behavior of CNT-Filled Unidirectional Kenaf–Epoxy Composites

    Article • Processes, January 2021, MDPI AG

    Dr Mohammad Jawaid

  138. Extraction and Characterization of Microcrystalline Cellulose from Date Palm Fibers using Successive Chemical Treatments

    Article • Journal of Polymers and the Environment, January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  139. Future Trends in Natural Fiber Composites in the Automotive Industry

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  140. Manufacturing Automotive Components from Sustainable Natural Fiber Composites

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  141. Natural Fiber Composite Fabrication for the Automotive Industry

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  142. Natural Fiber Composite Qualification in the Automotive Industry

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  143. Natural Fiber Reinforcement Preparation

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  144. Natural Fibers in the Automotive Industry

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  145. Sustainability Assessment and Recycling of Natural Fiber Composites

    Article • January 2021, Springer Science + Business Media

    Dr Mohammad Jawaid

  146. Cellulose nanocrystal extracted from date palm fibre: Morphological, structural and thermal properties

    Article • Industrial Crops and Products, January 2021, Elsevier

    Dr Mohammad Jawaid

  147. Dynamic mechanical characters of PEG/zircon composites around PEG glassy region

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Mohammad Jawaid

  148. The Effects of Stacking Sequence on Dynamic Mechanical Properties and Thermal Degradation of Kenaf/Jute Hybrid Composites

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2021, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  149. Parameters Optimization in Compression Molding of Ultra-high Molecular Weight Polyethylene/Cellulose Nanofiber Bio-nanocomposites by using Response Surface Methodology

    Article • Pertanika Journal of Science and Technology, December 2020, Universiti Putra Malaysia

    Dr Mohammad Jawaid

  150. Characterization of Microcrystalline Cellulose Isolated from Conocarpus Fiber

    Article • Polymers, December 2020, MDPI AG

    Dr Mohammad Jawaid

  151. Morphological, Structural, and Thermal analysis of three part of Conocarpus Cellulosic Fibres

    Article • Journal of Materials Research and Technology, December 2020, Elsevier

    Dr Mohammad Jawaid

  152. Tensile and Flexural Properties of Silica Nanoparticles Modified Unidirectional Kenaf and Hybrid Glass/Kenaf Epoxy Composites

    Article • Polymers, November 2020, MDPI AG

    Dr Mohammad Jawaid

  153. Effects of Accelerated Weathering on Degradation Behavior of Basalt Fiber Reinforced Polymer Nanocomposites

    Article • Polymers, November 2020, MDPI AG

    Dr Mohammad Jawaid

  154. Insights into the Current Trends in the Utilization of Bacteria for Microbially Induced Calcium Carbonate Precipitation

    Article • Materials, November 2020, MDPI AG

    Dr Mohammad Jawaid

  155. Thermal characterization of date palm/epoxy composites with fillers from different parts of the tree

    Article • Journal of Materials Research and Technology, November 2020, Elsevier

    Dr Mohammad Jawaid

  156. Development of active agents filled polylactic acid films for food packaging application

    Article • International Journal of Biological Macromolecules, November 2020, Elsevier

    Dr Mohammad Jawaid

  157. Effect of MWCNT Surface Functionalisation and Distribution on Compressive Properties of Kenaf and Hybrid Kenaf/Glass Fibres Reinforced Polymer Composites

    Article • Polymers, October 2020, MDPI AG

    Dr Mohammad Jawaid

  158. Morphological, chemical and thermal analysis of cellulose nanocrystals extracted from bamboo fibre

    Article • International Journal of Biological Macromolecules, October 2020, Elsevier

    Dr Mohammad Jawaid

  159. Process Optimization of Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposites in Triple Screw Kneading Extruder by Response Surface Methodology

    Article • Molecules, September 2020, MDPI AG

    Dr Mohammad Jawaid

  160. Life cycle analysis of hybrid oil palm/glass fibre-reinforced polyurethane composites for automotive crash box

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, September 2020, Universiti Malaysia Pahang Publisher

    Dr Mohammad Jawaid

  161. Structural, Morphological and Thermal Properties of Cellulose Nanofibers from Napier fiber (Pennisetum purpureum)

    Article • Materials, September 2020, MDPI AG

    Dr Mohammad Jawaid

  162. Characterization of Hybrid Oil Palm Empty Fruit Bunch/Woven Kenaf Fabric-Reinforced Epoxy Composites

    Article • Polymers, September 2020, MDPI AG

    Dr Mohammad Jawaid

  163. Mechanical properties enhancement of cardanol by hybridization with kenaf/recycled carbon

    Article • Mechanics of Materials, September 2020, Elsevier

    Dr Mohammad Jawaid

  164. Extraction and Characterization of Cellulose Fibers from the Stem of Momordica Charantia

    Article • Journal of Natural Fibers, August 2020, Taylor & Francis

    Dr Mohammad Jawaid

  165. Characterization of microcrystalline cellulose extracted from olive fiber

    Article • International Journal of Biological Macromolecules, August 2020, Elsevier

    Dr Mohammad Jawaid

  166. Properties and characteristics of nanocrystalline cellulose isolated from olive fiber

    Article • Carbohydrate Polymers, August 2020, Elsevier

    Dr Mohammad Jawaid

  167. Novel Spider Silk Fiber for High-Performance Textiles and Eco-friendly Armor Applications

    Article • Journal of Natural Fibers, July 2020, Taylor & Francis

    Dr Mohammad Jawaid

  168. Low Velocity Impact and Compression after Impact Properties on Gamma Irradiated Kevlar/Oil Palm Empty Fruit Bunch Hybrid Composites

    Article • Coatings, July 2020, MDPI AG

    Dr Mohammad Jawaid

  169. Physical and Mechanical Properties of Paper Made from Beaten Empty Fruit Bunch Fiber Incorporated with Microcrystalline Cellulose

    Article • Journal of Natural Fibers, July 2020, Taylor & Francis

    Dr Mohammad Jawaid

  170. Effect of cellulose nano fibers and nano clays on the mechanical, morphological, thermal and dynamic mechanical performance of kenaf/epoxy composites

    Article • Carbohydrate Polymers, July 2020, Elsevier

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  171. Morphological, Physiochemical and Thermal Properties of Microcrystalline Cellulose (MCC) Extracted from Bamboo Fiber

    Article • Molecules, June 2020, MDPI AG

    Dr Mohammad Jawaid

  172. A comprehensive review of coconut shell powder composites: Preparation, processing, and characterization

    Article • Journal of Thermoplastic Composite Materials, June 2020, SAGE Publications

    Dr Mohammad Jawaid

  173. Sodium Hydroxide Treatment of Waste Rubber Crumb and Its Effects on Properties of Unsaturated Polyester Composites

    Article • Applied Sciences, June 2020, MDPI AG

    Dr Mohammad Jawaid

  174. Thermal stability of natural fibers and their polymer composites

    Article • Iranian Polymer Journal, May 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  175. Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants

    Article • Journal of Natural Fibers, May 2020, Taylor & Francis

    Dr Mohammad Jawaid

  176. Extraction and Characterization of Natural Fibers from Citrullus lanatus Climber

    Article • Journal of Natural Fibers, May 2020, Taylor & Francis

    Prof. Dr. Abdullah M. Asiri, Dr Mohammad Jawaid

  177. A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and morphological properties

    Article • Polymer Testing, May 2020, Elsevier

    Dr Mohammad Jawaid

  178. Effects of Date Palm fibres loading on mechanical, and thermal properties of Date Palm reinforced phenolic composites

    Article • Journal of Materials Research and Technology, May 2020, Elsevier

    Dr Mohammad Jawaid

  179. Effects of nanoclay on physical and dimensional stability of Bamboo/Kenaf/nanoclay reinforced epoxy hybrid nanocomposites

    Article • Journal of Materials Research and Technology, May 2020, Elsevier

    Dr Mohammad Jawaid

  180. Microcrystalline Cellulose from Fruit Bunch Stalk of Date Palm: Isolation and Characterization

    Article • Journal of Polymers and the Environment, April 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  181. Effect of Surface Treatment on the Performance of Polyester Composite Filled with Waste Glove Rubber Crumbs

    Article • Waste and Biomass Valorization, March 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  182. Characterization of Date Palm Fiber-Reinforced Different Polypropylene Matrices

    Article • Polymers, March 2020, MDPI AG

    Dr Mohammad Jawaid

  183. Accelerated Weathering and Soil Burial Effect on Biodegradability, Colour and Textureof Coir/Pineapple Leaf Fibres/PLA Biocomposites

    Article • Polymers, February 2020, MDPI AG

    Dr Mohammad Jawaid

  184. Characterization of alkali treated new cellulosic fibre from Cyrtostachys renda

    Article • Journal of Materials Research and Technology, February 2020, Elsevier

    Dr Mohammad Jawaid

  185. Characterization of Lignocellulosic Biomass from Malaysian’s Yankee Pineapple AC6 Toward Composite Application

    Article • Journal of Natural Fibers, January 2020, Taylor & Francis

    Dr Mohammad Jawaid

  186. Characterization of silane treated Malaysian Yankee Pineapple AC6 leaf fiber (PALF) towards industrial applications

    Article • Journal of Materials Research and Technology, January 2020, Elsevier

    Dr Mohammad Jawaid

  187. Conceptual design of oil palm fibre reinforced polymer hybrid composite automotive crash box using integrated approach

    Article • Journal of Central South University, January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  188. Extraction and characterization of vetiver grass (Chrysopogon zizanioides) and kenaf fiber (Hibiscus cannabinus) as reinforcement materials for epoxy based composite structures

    Article • Journal of Materials Research and Technology, January 2020, Elsevier

    Dr Mohammad Jawaid, Prof. Dr. Abdullah M. Asiri

  189. Improving the Properties of Pineapple Leaf Fibres by Chemical Treatments

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  190. Physical, Thermal and Mechanical Properties of Areca Fibre Reinforced Polymer Composites — An Overview

    Article • Journal of Bionic Engineering, January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  191. Thermo-oxidative stability and flammability properties of bamboo/kenaf/nanoclay/epoxy hybrid nanocomposites

    Article • RSC Advances, January 2020, Royal Society of Chemistry

    Dr Mohammad Jawaid

  192. A Comparative Study of X-Ray Shielding Capability in Ion-Implanted Acrylic and Glass

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  193. A review on PEEK composites – Manufacturing methods, properties and applications

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Mohammad Jawaid

  194. Alkali treated coir/pineapple leaf fibres reinforced PLA hybrid composites: Evaluation of mechanical, morphological, thermal and physical properties

    Article • eXPRESS Polymer Letters, January 2020, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Dr Mohammad Jawaid

  195. Characterisation of Micro-Sized and Nano-Sized Tungsten Oxide-Epoxy Composites for Radiation Shielding of Diagnostic X-Rays

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  196. Characteristics of X-Ray Attenuation in Electrospun Bismuth Oxide/Poly-lactic Acid Nanofibre Mats

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  197. Effect of Bi2O3 Particle Sizes and Addition of Starch into Bi2O3–PVA Composites for X-Ray Shielding

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  198. Effect of Particle Size, Filler Loadings and X-Ray Energy on the X-Ray Attenuation Ability of Tungsten Oxide–Epoxy Composites

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  199. Manufacturing Process Selection of “Green” Oil Palm Natural Fiber Reinforced Polyurethane Composites Using Hybrid TEA Criteria Requirement and AHP Method for Automotive Crash Box

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2020, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  200. Materials and Methodology

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  201. Materials selection of “green” natural fibers in polymer composite automotive crash box using DMAIC approach in Six Sigma method

    Article • Journal of Engineered Fibers and Fabrics, January 2020, SAGE Publications

    Dr Mohammad Jawaid

  202. Microstructural Design of Lead Oxide–Epoxy Composites for Radiation Shielding Purposes

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  203. Introduction and Background

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  204. Self-repairing hollow-fiber polymer composites

    Article • January 2020, Elsevier

    Dr Mohammad Jawaid

  205. Summary and Concluding Remarks

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  206. Synthesis and Characterization of Ion-Implanted Epoxy Composites for X-Ray Shielding

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  207. Synthesis and Characterization of Pb, Bi or W Compound Filled Epoxy Composites for Shielding of Diagnostic X-Rays

    Article • January 2020, Springer Science + Business Media

    Dr Mohammad Jawaid

  208. The Effect of Fibre Length on Flexural and Dynamic Mechanical Properties of Pineapple Leaf Fibre Composites

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2020, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  209. New Lignocellulosic Aristida adscensionis Fibers as Novel Reinforcement for Composite Materials: Extraction, Characterization and Weibull Distribution Analysis

    Article • Journal of Polymers and the Environment, December 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  210. Effect of nanoclay content on the thermal, mechanical and shape memory properties of epoxy nanocomposites

    Article • Polymer Bulletin, December 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  211. The Effect of Bi-Functionalized MMT on Morphology, Thermal Stability, Dynamic Mechanical, and Tensile Properties of Epoxy/Organoclay Nanocomposites

    Article • Polymers, December 2019, MDPI AG

    Dr Mohammad Jawaid

  212. Thermal Properties of Nanocrystalline Cellulose and Cellulose Nanowhisker

    Article • International Journal of Innovative Technology and Exploring Engineering, November 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr Mohammad Jawaid

  213. A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis

    Article • Journal of the Mechanical Behavior of Biomedical Materials, November 2019, Elsevier

    Dr Mohammad Jawaid

  214. Effects of layering sequence and gamma radiation on mechanical properties and morphology of Kevlar/oil palm EFB/epoxy hybrid composites

    Article • Journal of Materials Research and Technology, November 2019, Elsevier

    Dr Mohammad Jawaid

  215. Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites

    Article • Composite Structures, October 2019, Elsevier

    Dr Mohammad Jawaid

  216. Accelerated weathering and soil burial effects on colour, biodegradability and thermal properties of bamboo/kenaf/epoxy hybrid composites

    Article • Polymer Testing, October 2019, Elsevier

    Dr Mohammad Jawaid

  217. Mechanical and Thermal Properties of Montmorillonite-Reinforced Polypropylene/Rice Husk Hybrid Nanocomposites

    Article • Polymers, September 2019, MDPI AG

    Dr Mohammad Jawaid

  218. Hybrid Composites: A Versatile Materials for Future

    Article • Applied Science and Engineering Progress, September 2019, King Mongkut's University of Technology North Bangkok

    Dr Mohammad Jawaid

  219. Thermal and Flammability Properties of Kenaf/Recycled Carbon Filled with Cardanol Hybrid Composites

    Article • International Journal of Polymer Science, September 2019, Hindawi Publishing Corporation

    Dr Mohammad Jawaid

  220. Oil palm waste based hybrid nanocomposites: Fire performance and structural analysis

    Article • Journal of Building Engineering, September 2019, Elsevier

    Dr Mohammad Jawaid

  221. Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles

    Article • Polimery, September 2019, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  222. Date palm reinforced epoxy composites: tensile, impact and morphological properties

    Article • Journal of Materials Research and Technology, September 2019, Elsevier

    Dr Mohammad Jawaid

  223. Effects of Nanoclay on Tensile and Flexural Properties of Pineapple Leaf Fibre Reinforced Phenolic Composite

    Article • International Journal of Recent Technology and Engineering (IJRTE), August 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr Mohammad Jawaid

  224. Water Absorption and Thickness Swelling Properties of Silica Aerogel Infused Sugar Palm Fiber/Polyester Composites

    Article • International Journal of Recent Technology and Engineering (IJRTE), August 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr Mohammad Jawaid

  225. Impact of silane treatment on the dielectric properties of pineapple leaf/kenaf fiber reinforced phenolic composites

    Article • Journal of Composite Materials, August 2019, SAGE Publications

    Dr Mohammad Jawaid

  226. Flax and sugar palm reinforced epoxy composites: effect of hybridization on physical, mechanical, morphological and dynamic mechanical properties

    Article • Materials Research Express, August 2019, Institute of Physics Publishing

    Dr Mohammad Jawaid

  227. Characterization of natural fiber obtained from different parts of date palm tree (Phoenix dactylifera L.)

    Article • International Journal of Biological Macromolecules, August 2019, Elsevier

    Dr Mohammad Jawaid

  228. Improved Interlaminar Shear Behaviour of a New Hybrid Kevlar/Cocos Nucifera Sheath Composites with Graphene Nanoplatelets Modified Epoxy Matrix

    Article • Fibers and Polymers, August 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  229. A New Study on Characterization and Properties of Natural Fibers Obtained from Olive Tree (Olea europaea L.) Residues

    Article • Journal of Polymers and the Environment, July 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  230. The Effects of Stacking Sequence on the Tensile and Flexural Properties of Kenaf/Jute Fibre Hybrid Composites

    Article • Journal of Natural Fibers, July 2019, Taylor & Francis

    Dr Mohammad Jawaid, Ir. Dr. Mohamed Thariq Bin Hameed Sultan

  231. Evaluation of Mechanical, Physical, and Morphological Properties of Epoxy Composites Reinforced with Different Date Palm Fillers

    Article • Materials, July 2019, MDPI AG

    Dr Mohammad Jawaid

  232. Analysing impact properties of CNT filled bamboo/glass hybrid nanocomposites through drop-weight impact testing, UWPI and compression-after-impact behaviour

    Article • Composites Part B Engineering, July 2019, Elsevier

    Dr Mohammad Jawaid

  233. Physical and thermal properties of treated sugar palm/glass fibre reinforced thermoplastic polyurethane hybrid composites

    Article • Journal of Materials Research and Technology, July 2019, Elsevier

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  234. Water absorption, thickness swelling and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites

    Article • Journal of Materials Research and Technology, July 2019, Elsevier

    Dr Mohammad Jawaid

  235. Hydrothermal ageing effect on the mechanical behaviour and fatigue response of aluminium alloy/glass/epoxy hybrid composite single lap joints

    Article • Composite Structures, July 2019, Elsevier

    Dr Mohammad Jawaid

  236. Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites

    Article • Journal of Materials Research and Technology, July 2019, Elsevier

    Dr Mohammad Jawaid

  237. Thermal degradation and viscoelastic properties of Kevlar/Cocos nucifera sheath reinforced epoxy hybrid composites

    Article • Composite Structures, July 2019, Elsevier

    Dr Mohammad Jawaid

  238. Void Content, Tensile, Vibration and Acoustic Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Hybrid Composites

    Article • Materials, June 2019, MDPI AG

    Dr Mohammad Jawaid

  239. Enhanced Thermal and Dynamic Mechanical Properties of Synthetic/Natural Hybrid Composites with Graphene Nanoplateletes

    Article • Polymers, June 2019, MDPI AG

    Dr Mohammad Jawaid

  240. Morphological, physico-chemical, and thermal properties of cellulose nanowhiskers from roselle fibers

    Article • Cellulose, June 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  241. Effect of fibre loading and Ca(OH)2 treatment on thermal, mechanical, and physical properties of pineapple leaf fibre/polyester reinforced composites

    Article • Materials Research Express, June 2019, Institute of Physics Publishing

    Dr Mohammad Jawaid

  242. Thermal and dynamic mechanical properties of polyethylene glycol/quartz composites for phase change materials

    Article • Journal of Applied Polymer Science, June 2019, Wiley

    Dr Mohammad Jawaid

  243. Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying

    Article • Polimery, June 2019, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  244. Microstructure and Mechanical Properties of Unsaturated Polyester Composites Filled with Waste Rubber Glove Crumbs

    Article • Fibers and Polymers, June 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  245. Recent development in binderless fiber-board fabrication from agricultural residues: A review

    Article • Construction and Building Materials, June 2019, Elsevier

    Dr Mohammad Jawaid

  246. An investigation of the morphological and tensile properties of vacuum resin impregnated sugar palm fibers with various thermosetting resins

    Article • BioResources, May 2019, BioResources

    Dr Mohammad Jawaid

  247. Micro Crystalline Bamboo Cellulose Based Seaweed Biodegradable Composite Films for Sustainable Packaging Material

    Article • Journal of Polymers and the Environment, May 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  248. Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios

    Article • Journal of Materials Research and Technology, May 2019, Elsevier

    Dr Mohammad Jawaid

  249. Improved Mechanical and Moisture-Resistant Properties of Woven Hybrid Epoxy Composites by Graphene Nanoplatelets (GNP)

    Article • Materials, April 2019, MDPI AG

    Dr Mohammad Jawaid

  250. Fabrication of Fibre Metal Laminate with Flax and Sugar Palm Fibre based Epoxy Composite and Evaluation of their Fatigue Properties

    Article • JOURNAL OF POLYMER MATERIALS, April 2019, Printspublications Private Limited

    Dr Mohammad Jawaid

  251. Corn and Rice Starch-Based Bio-Plastics as Alternative Packaging Materials

    Article • Fibers, April 2019, MDPI AG

    Dr Mohammad Jawaid

  252. Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites

    Article • Composites Part B Engineering, April 2019, Elsevier

    Dr Mohammad Jawaid

  253. Physico-chemical and thermal properties of untreated and treated Acacia planifrons bark fibers for composite reinforcement

    Article • Materials Letters, April 2019, Elsevier

    Dr Mohammad Jawaid

  254. Characterization of new cellulosic fiber: Dracaena reflexa as a reinforcement for polymer composite structures

    Article • Journal of Materials Research and Technology, April 2019, Elsevier

    Dr Mohammad Jawaid

  255. Effect of Alkaline Treatment on Mechanical, Physical and Thermal Properties of Roselle/Sugar Palm Fiber Reinforced Thermoplastic Polyurethane Hybrid Composites

    Article • Fibers and Polymers, April 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  256. Effect of Alkali Treatment on Mechanical and Morphological Properties of Pineapple Leaf Fibre/Polyester Composites

    Article • Journal of Polymers and the Environment, March 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  257. Dynamic and Thermo-Mechanical Properties of Hybridized Kenaf/PALF Reinforced Phenolic Composites

    Article • Polymer Composites, March 2019, Wiley

    Dr Mohammad Jawaid

  258. A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization

    Article • Carbohydrate Polymers, March 2019, Elsevier

    Dr Mohammad Jawaid

  259. Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens

    Article • International Journal of Biological Macromolecules, March 2019, Elsevier

    Dr Mohammad Jawaid

  260. Impact properties of kenaf Fibre/X-ray films hybrid composites for structural applications

    Article • Journal of Materials Research and Technology, March 2019, Elsevier

    Dr Mohammad Jawaid

  261. Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: Mechanical and thermomechanical properties

    Article • Construction and Building Materials, March 2019, Elsevier

    Dr Mohammad Jawaid

  262. Effect of graphene nanoplatelets on the ballistic performance of hybrid Kevlar/Cocos nucifera sheath-reinforced epoxy composites

    Article • Textile Research Journal, February 2019, SAGE Publications

    Dr Mohammad Jawaid

  263. Effect of freezing temperature and stacking sequence on the mechanical properties of hybrid fibre metal laminates made with carbon, flax, and sugar palm fibres

    Article • BioResources, February 2019, BioResources

    Dr Mohammad Jawaid

  264. Evaluation of Mechanical and Physical Properties of Hybrid Composites from Food Packaging and Textiles Wastes

    Article • Journal of Polymers and the Environment, January 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  265. Physical and mechanical properties of woven kenaf/bamboo fiber mat reinforced epoxy hybrid composites

    Article • BioResources, January 2019, BioResources

    Dr Mohammad Jawaid

  266. Sandwich-structured bamboo powder/glass fibre-reinforced epoxy hybrid composites – Mechanical performance in static and dynamic evaluations

    Article • Journal of Sandwich Structures & Materials, January 2019, SAGE Publications

    Ir. Dr. Mohamed Thariq Bin Hameed Sultan, Dr Mohammad Jawaid

  267. Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites

    Article • Composite Structures, January 2019, Elsevier

    Dr Mohammad Jawaid

  268. A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites

    Article • International Journal of Biological Macromolecules, January 2019, Elsevier

    Dr Mohammad Jawaid

  269. Low velocity impact and compression after impact properties of hybrid bio-composites modified with multi-walled carbon nanotubes

    Article • Composites Part B Engineering, January 2019, Elsevier

    Dr Mohammad Jawaid

  270. Evaluation of mechanical and free vibration properties of the pineapple leaf fibre reinforced polyester composites

    Article • Construction and Building Materials, January 2019, Elsevier

    Dr Mohammad Jawaid

  271. Modification of Oil Palm Empty Fruit Bunch and Sugarcane Bagasse Biomass as Potential Reinforcement for Composites Panel and Thermal Insulation Materials

    Article • Journal of Bionic Engineering, January 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  272. Bio-based Polymers and Nanocomposites

    Article • January 2019, Springer Science + Business Media

    Dr Mohammad Jawaid

  273. Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  274. Functionalized Graphene Nanocomposites and their Derivatives

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  275. Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  276. Modelling of Damage Processes in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  277. Nanocarbon and its Composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  278. Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  279. A newly developed bulletproof vest using kenaf–X-ray film hybrid composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  280. An overview of mechanical and physical testing of composite materials

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  281. Damage analysis of glass fiber reinforced composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  282. Functionalized Graphene Reinforced Hybrid Nanocomposites and Their Applications

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  283. Impact damage analysis of hybrid composite materials

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  284. Mechanical and physical properties of sisal and hybrid sisal fiber-reinforced polymer composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  285. Nanocarbon: Preparation, properties, and applications

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  286. Nanocomposites with nanofibers and fillers from renewable resources

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  287. Nondestructive testing method for Kevlar and natural fiber and their hybrid composites

    Article • January 2019, Elsevier

    Dr Mohammad Jawaid

  288. Evaluation of ballistic performance of hybrid Kevlar®/Cocos nucifera sheath reinforced epoxy composites

    Article • Journal of the Textile Institute, December 2018, Taylor & Francis

    Dr Mohammad Jawaid, Ir. Dr. Mohamed Thariq Bin Hameed Sultan, Dr RIDWAN YAHAYA

  289. Evaluation of dynamic properties of nano oil palm empty fruit bunch filler/epoxy composites

    Article • Journal of Materials Research and Technology, December 2018, Elsevier

    Dr Mohammad Jawaid

  290. Evaluation of the hybridization effect on the thermal and thermo-oxidative stability of bamboo/kenaf/epoxy hybrid composites

    Article • Journal of Thermal Analysis and Calorimetry, November 2018, Springer Science + Business Media

    Dr Mohammad Jawaid

  291. A review on thermomechanical properties of polymers and fibers reinforced polymer composites

    Article • Journal of Industrial and Engineering Chemistry, November 2018, Elsevier

    Dr Mohammad Jawaid

  292. Effects of Surface Treatments on Tensile, Thermal and Fibre-matrix Bond Strength of Coir and Pineapple Leaf Fibres with Poly Lactic Acid

    Article • Journal of Bionic Engineering, November 2018, Springer Science + Business Media

    Dr Mohammad Jawaid

  293. Mechanical and moisture diffusion behaviour of hybrid Kevlar/Cocos nucifera sheath reinforced epoxy composites

    Article • Journal of Materials Research and Technology, November 2018, Elsevier

    Dr Mohammad Jawaid

  294. Effect of Modified Tapioca Starch on Mechanical, Thermal, and Morphological Properties of PBS Blends for Food Packaging

    Article • Polymers, October 2018, MDPI AG

    Dr Mohammad Jawaid

  295. Effect of Various Chemical Treatments of Prosopis juliflora Fibers as Composite Reinforcement: Physicochemical, Thermal, Mechanical, and Morphological Properties

    Article • Journal of Natural Fibers, October 2018, Taylor & Francis

    Dr senthamaraikannan P, Dr Sanjay M R, Dr Mohammad Jawaid

  296. Experimental and Analysis of Jute Fabric with Silk Fabric Reinforced Polymer Composites

    Article • October 2018, Materials Research Forum, LLC

    Dr. Bharath K N, Dr Mohammad Jawaid

  297. Energy Absorption of Natural Fibre Reinforced Thermoset Polymer Composites Materials for Automotive Crashworthiness: A Review

    Article • October 2018, Materials Research Forum, LLC

    Dr Mohammad Jawaid

  298. Effect of benzoyl treatment on flexural and compressive properties of sugar palm/glass fibres/epoxy hybrid composites

    Article • Polymer Testing, October 2018, Elsevier

    Dr Mohammad Jawaid

  299. Thermal, physical properties and flammability of silane treated kenaf/pineapple leaf fibres phenolic hybrid composites

    Article • Composite Structures, October 2018, Elsevier

    Dr Mohammad Jawaid

  300. Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

    Article • Composite Structures, October 2018, Elsevier

    Dr Mohammad Jawaid

  301. Selection of Natural Fiber for Hybrid Kevlar/Natural Fiber Reinforced Polymer Composites for Personal Body Armor by Using Analytical Hierarchy Process

    Article • Frontiers in Materials, August 2018, Frontiers

    Dr Mohammad Jawaid

  302. Effect of Gamma Radiation on Compressive Properties of Kevlar/Oil Palm Empty Fruit Bunch Hybrid Composites

    Article • BioResources, August 2018, BioResources

    Dr Mohammad Jawaid

  303. Mechanical, dynamic, and thermomechanical properties of coir/pineapple leaf fiber reinforced polylactic acid hybrid biocomposites

    Article • Polymer Composites, August 2018, Wiley

    Dr Mohammad Jawaid

  304. Influence of treatments on the dielectric properties of sugar palm fiber reinforced phenolic composites

    Article • Journal of Molecular Liquids, August 2018, Elsevier

    Dr Mohammad Jawaid

  305. Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy composites

    Article • Journal of Materials Research and Technology, August 2018, Elsevier

    Dr Mohammad Jawaid

  306. Physical and mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

    Article • Journal of Materials Research and Technology, August 2018, Elsevier

    Dr Mohammad Jawaid

  307. Vertex angles effects in the energy absorption of axially crushed kenaf fibre-epoxy reinforced elliptical composite cones

    Article • Defence Technology, August 2018, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  308. Preparation and characterization of nanocomposite films from oil palm pulp nanocellulose/poly (Vinyl alcohol) by casting method

    Article • Carbohydrate Polymers, July 2018, Elsevier

    Prof. Dr. Abdullah M. Asiri, Dr Mohammad Jawaid

  309. Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose

    Article • International Journal of Biological Macromolecules, July 2018, Elsevier

    Dr Mohammad Jawaid

  310. Quasi-static crush behaviour of environmentally friendly kenaf/wool epoxy composites elliptical tube

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2018, Universiti Malaysia Pahang Publisher

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  311. Mechanical performance of roselle/sugar palm fiber hybrid reinforced polyurethane composites

    Article • BioResources, June 2018, BioResources

    Dr Mohammad Jawaid

  312. The AirCirc: design and development of a thermal management prototype device for below-knee prosthesis leg socket

    Article • Disability and Rehabilitation Assistive Technology, June 2018, Taylor & Francis

    Dr Mohammad Jawaid

  313. Mechanical properties of a novel fibre metal laminate reinforced with the carbon, flax, and sugar palm fibres

    Article • BioResources, June 2018, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  314. A review on date palm (phoenix dactylifera) fibers and its polymer composites

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  315. Crushing behavior of kenaf fiber/wooden stick reinforced epoxy hybrid “green” composite elliptical tubes

    Article • Polimery, June 2018, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  316. Effect of Fiber Loadings and Treatment on Dynamic Mechanical, Thermal and Flammability Properties of Pineapple Leaf Fiber and Kenaf Phenolic Composites

    Article • JOURNAL OF RENEWABLE MATERIALS, June 2018, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  317. Effect of microcrystalline cellulose on the strength of oil palm empty fruit bunch paper

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  318. Effect of pretreatment concentration on pulp blending between oil palm empty fruit bunch and citronella leaf fibers in terms of pulp and paper properties

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  319. Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review

    Article • Construction and Building Materials, June 2018, Elsevier

    Dr Mohammad Jawaid

  320. Mechanical properties of laminated kenaf woven fabric composites for below-knee prosthesis socket application

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  321. Oil Palm EFB/Kenaf Fibre Reinforced Epoxy Hybrid Composites: Dimension Stability Behaviours

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  322. Physical and flammability properties of kenaf and pineapple leaf fibre hybrid composites

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  323. Physical properties of silane-treated sugar palm fiber reinforced thermoplastic polyurethane composites

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  324. The Wood and Biofiber International Conference (WOBIC 2017)

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  325. Recycling of waste rubber as fillers: A review

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  326. Thermal properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  327. Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites

    Article • Journal of Natural Fibers, May 2018, Taylor & Francis

    Dr Mohammad Jawaid

  328. A Review on Phenolic Resin and its Composites

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Dr Mohammad Jawaid, Miss Naheed saba, mohd asim

  329. Seaweeds as Renewable Sources for Biopolymers and its Composites: A Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  330. Review of Kenaf Reinforced Hybrid Biocomposites: Potential for Defence Applications

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Dr RIDWAN YAHAYA, Professor S.M. Sapuan, Dr Mohammad Jawaid

  331. Editorial: Biopolymers and Biocomposites: Chemistry and Technology

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Prof Dr Md Enamul Hoque, Dr Mohammad Jawaid

  332. Tensile and Flexural Properties of a Newly Developed Bulletproof Vest Using a Kenaf/X-ray Film Hybrid Composite

    Article • BioResources, April 2018, BioResources

    Dr Mohammad Jawaid

  333. The Effects of Multi-walled CNT in Bamboo/Glass Fibre Hybrid Composites: Tensile and Flexural Properties

    Article • BioResources, April 2018, BioResources

    Dr Mohammad Jawaid

  334. Dynamic mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

    Article • Polymer Composites, April 2018, Wiley

    Dr Mohammad Jawaid

  335. Effect of stacking sequence on properties of coconut leaf sheath/jute/E-glass reinforced phenol formaldehyde hybrid composites

    Article • Journal of Industrial Textiles, April 2018, SAGE Publications

    Dr Sanjay M R, Dr Mohammad Jawaid, Dr. Bharath K N

  336. Newer natural fiber sourced identified and characterized.

    Article • Journal of Natural Fibers, April 2018, Taylor & Francis

    Dr Subrahmanya Bhat K, Dr senthamaraikannan P, Dr Mohammad Jawaid

  337. Enhanced Flame Retardancy, Thermal and Mechanical Properties of Hybrid Magnesium Hydroxide/Montmorillonite Reinforced Polyamide 6/Polypropylene Nanocomposites

    Article • Fibers and Polymers, April 2018, Springer Science + Business Media

    Dr Mohammad Jawaid

  338. Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications

    Article • Journal of Natural Fibers, February 2018, Taylor & Francis

    Dr senthamaraikannan P, Dr Sanjay M R, Dr Mohammad Jawaid

  339. Study on characterization of Furcraea foetida new natural fiber as composite reinforcement for lightweight applications

    Article • Carbohydrate Polymers, February 2018, Elsevier

    Dr senthamaraikannan P, Dr Mohammad Jawaid

  340. Mechanical Properties of Fibre-Metal Laminates Made of Natural/Synthetic Fibre Composites

    Article • BioResources, January 2018, BioResources

    Dr Mohammad Jawaid

  341. Effect of Hybridization on the Mechanical Properties of Pineapple Leaf Fiber/Kenaf Phenolic Hybrid Composites

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2018, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  342. Natural fiber reinforced polylactic acid composites: A review

    Article • Polymer Composites, January 2018, Wiley

    Dr Mohammad Jawaid

  343. Bionanocomposites for Packaging Applications

    Article • January 2018, Springer Science + Business Media

    Prof. Sarat K Swain, Dr Mohammad Jawaid

  344. Characterization and properties of natural fiber polymer composites: A comprehensive review

    Article • Journal of Cleaner Production, January 2018, Elsevier

    Dr senthamaraikannan P, Dr Mohammad Jawaid, Dr Senthil S

  345. Effect of Alkali treatments on physical and Mechanical strength of Pineapple leaf fibres

    Article • IOP Conference Series Materials Science and Engineering, January 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  346. Impact behaviour of hybrid composites for structural applications: A review

    Article • Composites Part B Engineering, January 2018, Elsevier

    Dr Mohammad Jawaid

  347. Physical properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites

    Article • IOP Conference Series Materials Science and Engineering, January 2018, Institute of Physics Publishing

    Dr Mohammad Jawaid

  348. Polymer-based Nanocomposites for Energy and Environmental Applications

    Article • January 2018, Elsevier

    Dr Mohammad Jawaid, Professor Mohammad Mansoob Khan

  349. Tensile properties of a kenaf/x-ray film hybrid composite

    Article • January 2018, American Institute of Physics

    Dr Mohammad Jawaid

  350. Sustainable Composites for Aerospace Applications

    Article • January 2018, Elsevier

    Dr Mohammad Jawaid

  351. Preliminary Study on Tensile and Impact Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Composites

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2018, Computers, Materials and Continua (Tech Science Press)

    Dr Mohammad Jawaid

  352. Sustainable bio composites for aircraft components

    Article • January 2018, Elsevier

    Dr Mohammad Jawaid

  353. The role of advanced polymer materials in aerospace

    Article • January 2018, Elsevier

    Dr Mohammad Jawaid

  354. Effect of Surface Treatment on the Mechanical Properties of Sugar Palm/Glass Fiber-reinforced Thermoplastic Polyurethane Hybrid Composites

    Article • BioResources, December 2017, BioResources

    Dr Mohammad Jawaid

  355. Formulation and characterization of in situ generated copper nanoparticles reinforced cellulose composite films for potential antimicrobial applications

    Article • Journal of Macromolecular Science Part A, December 2017, Taylor & Francis

    Dr Mohammad Jawaid

  356. Physical, structural and thermomechanical properties of nano oil palm empty fruit bunch filler based epoxy nanocomposites

    Article • Industrial Crops and Products, December 2017, Elsevier

    Dr Mohammad Jawaid

  357. Biomass and bioenergy: An overview of the development potential in Turkey and Malaysia

    Article • Renewable and Sustainable Energy Reviews, November 2017, Elsevier

    Dr Mohammad Jawaid, Dr Khalid Rehman Hakeem

  358. Utilization of chemically treated municipal solid waste (spent coffee bean powder) as reinforcement in cellulose matrix for packaging applications

    Article • Waste Management, November 2017, Elsevier

    Dr Mohammad Jawaid

  359. Isolation and characterization of microcrystalline cellulose from roselle fibers

    Article • International Journal of Biological Macromolecules, October 2017, Elsevier

    Dr Mohammad Jawaid

  360. A Review on detecting and characterizing damage mechanisms of synthetic and natural fiber based composites

    Article • BioResources, September 2017, BioResources

    Dr Mohammad Jawaid

  361. Static and dynamic properties of sisal fiber polyester composites – Effect of interlaminar fiber orientation

    Article • BioResources, September 2017, BioResources

    Dr Mohammad Jawaid, Dr Siva Irulappasamy

  362. Design and materials development of automotive crash box: a review

    Article • Ciência & Tecnologia dos Materiais, September 2017, Elsevier

    Dr Mohammad Jawaid

  363. Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites

    Article • International Journal of Biological Macromolecules, September 2017, Elsevier

    Dr Mohammad Jawaid

  364. Tensile, barrier, dynamic mechanical, and biodegradation properties of cassava/sugar palm fiber reinforced cassava starch hybrid composites

    Article • BioResources, August 2017, BioResources

    Dr Mohammad Jawaid

  365. Thermal stability and dynamic mechanical properties of kenaf/bamboo fibre reinforced epoxy composites

    Article • BioResources, August 2017, BioResources

    Dr Mohammad Jawaid

  366. Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties

    Article • International Journal of Biological Macromolecules, August 2017, Elsevier

    Dr Mohammad Jawaid

  367. Corrigendum

    Article • European Journal of Phycology, July 2017, Taylor & Francis

    Dr Mohammad Jawaid

  368. Nanocellulose and Nanohydrogel Matrices

    Article • July 2017, Wiley

    Dr Mohammad Jawaid

  369. Thermal and Flame Retardancy Behavior of Oil Palm Based Epoxy Nanocomposites

    Article • Journal of Polymers and the Environment, July 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  370. Influence of fibre contents on mechanical and thermal properties of roselle fibre reinforced polyurethane composites

    Article • Fibers and Polymers, July 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  371. Physico-mechanical, thermal and morphological properties of furfuryl alcohol/2-ethylhexyl methacrylate/halloysite nanoclay wood polymer nanocomposites (WPNCs)

    Article • Heliyon, July 2017, Elsevier

    Dr Mohammad Jawaid

  372. The Effect of Silane Treated Fibre Loading on Mechanical Properties of Pineapple Leaf/Kenaf Fibre Filler Phenolic Composites

    Article • Journal of Polymers and the Environment, June 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  373. Effect of Alkali and Silane Treatments on Mechanical and Interfacial Bonding Strength of Sugar Palm Fibers with Thermoplastic Polyurethane

    Article • Journal of Natural Fibers, June 2017, Taylor & Francis

    Dr Mohammad Jawaid

  374. Cellulose nanocomposite films with in situ generated silver nanoparticles using Cassia alata leaf extract as a reducing agent

    Article • International Journal of Biological Macromolecules, June 2017, Elsevier

    Dr Mohammad Jawaid

  375. Dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique

    Article • Wear, June 2017, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  376. Effect of seaweed on mechanical, thermal, and biodegradation properties of thermoplastic sugar palm starch/agar composites

    Article • International Journal of Biological Macromolecules, June 2017, Elsevier

    Dr Mohammad Jawaid

  377. Energy absorption capacities of kenaf fibre-reinforced epoxy composite elliptical cones with circumferential holes

    Article • Fibers and Polymers, June 2017, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  378. Mechanical and Thermal Performances of Roselle Fiber/TPU composites

    Article • Polymer-Plastics Technology and Engineering, May 2017, Taylor & Francis

    Professor S.M. Sapuan, Mohd Radzi Ali, Dr Mohammad Jawaid

  379. Bacterial Nanocellulose Applications for Tissue Engineering

    Article • May 2017, Wiley

    Dr Mohammad Jawaid

  380. Decay Resistance of Acetic, Propionic, and Butyric Anhydrides Modified Rubberwood Against Brown Rot (Coniophora puteana)

    Article • BioResources, May 2017, BioResources

    Dr Mohammad Jawaid

  381. Effect of pineapple leaf fibre and kenaf fibre treatment on mechanical performance of phenolic hybrid composites

    Article • Fibers and Polymers, May 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  382. A review on tribological properties of natural fiber based sustainable hybrid composite

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, April 2017, SAGE Publications

    Dr Mohammad Jawaid

  383. Preparation and Properties of Cellulose/Tamarind Nut Powder Green Composites

    Article • Journal of Natural Fibers, April 2017, Taylor & Francis

    Dr Mohammad Jawaid

  384. New Page to Access Pyrazines and their Ring Fused Analogues: Synthesis from N-Propargylamines

    Article • Current Organic Synthesis, April 2017, Bentham Science Publishers

    Dr Mohammad Jawaid

  385. Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites

    Article • International Journal of Biological Macromolecules, April 2017, Elsevier

    Dr Mohammad Jawaid

  386. Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites

    Article • International Journal of Biological Macromolecules, April 2017, Elsevier

    Dr Mohammad Jawaid

  387. Dynamic Mechanical Analysis of Treated and Untreated Sugar Palm Fibre-based Phenolic Composites

    Article • BioResources, March 2017, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  388. A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2017, Taylor & Francis

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  389. Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material

    Article • Fibers and Polymers, March 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  390. Characteristics of Eucheuma cottonii waste from East Malaysia: physical, thermal and chemical composition

    Article • European Journal of Phycology, February 2017, Taylor & Francis

    Dr Mohammad Jawaid

  391. Effect of Treatments on the Physical and Morphological Properties of SPF/Phenolic Composites

    Article • Journal of Natural Fibers, February 2017, Taylor & Francis

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  392. Thermal Analysis of Bamboo Fibre and Its Composites

    Article • BioResources, February 2017, BioResources

    Dr Mohammad Jawaid

  393. Effect of Agar on Flexural, Impact, and Thermogravimetric Properties of Thermoplastic Sugar Palm Starch

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Dr Mohammad Jawaid

  394. Polyamides: Developments and Applications Towards Next-Generation Engineered Plastics

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Dr Mohammad Jawaid

  395. A Review on Polyurethane and its Polymer Composites

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Dr Mohammad Jawaid

  396. An Overview on Polylactic Acid, its Cellulosic Composites and Applications

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Miss Naheed saba, Dr Mohammad Jawaid

  397. Editorial (Thematic Issue: Theme: Polymers And Polymer Composites)

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  398. Preparation and properties of cellulose nanocomposite films with in situ generated copper nanoparticles using Terminalia catappa leaf extract

    Article • International Journal of Biological Macromolecules, February 2017, Elsevier

    Dr Mohammad Jawaid

  399. Case study: survey of patient satisfaction with prosthesis quality and design among below-knee prosthetic leg socket users

    Article • Disability and Rehabilitation Assistive Technology, January 2017, Taylor & Francis

    Dr Mohammad Jawaid

  400. Influence of treatments on the mechanical and thermal properties of sugar palm fibre reinforced phenolic composites

    Article • BioResources, January 2017, BioResources

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  401. Preparation and characterization of cassava bagasse reinforced thermoplastic cassava starch

    Article • Fibers and Polymers, January 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  402. Polyurethane-Based Biocomposites

    Article • January 2017, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  403. Processing of hybrid polymer composites—a review

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  404. Green Biocomposites

    Article • January 2017, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  405. Cellulosic Biocomposites: Potential Materials for Future

    Article • January 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  406. Damage characterization of E-glass and C-glass fibre polymer composites after high velocity impact

    Article • January 2017, American Institute of Physics

    Dr Mohammad Jawaid

  407. Design of Prosthetic Leg Socket from Kenaf Fibre Based Composites

    Article • January 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  408. Dimensional stability of pineapple leaf fibre reinforced phenolic composites

    Article • January 2017, American Institute of Physics

    Dr Mohammad Jawaid

  409. Effect of Kevlar and carbon fibres on tensile properties of oil palm/epoxy composites

    Article • January 2017, American Institute of Physics

    Dr Mohammad Jawaid

  410. Effect of cassava peel and cassava bagasse natural fillers on mechanical properties of thermoplastic cassava starch: Comparative study

    Article • January 2017, American Institute of Physics

    Dr Mohammad Jawaid

  411. Epoxy resin based hybrid polymer composites

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  412. Green Biocomposites for Structural Applications

    Article • January 2017, Springer Science + Business Media

    Dr Mohammad Jawaid

  413. Hybrid multifunctional composites—recent applications

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  414. Moisture Absorption and Thickness Swelling Behaviour of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane

    Article • Procedia Engineering, January 2017, Elsevier

    Dr Mohammad Jawaid

  415. Preface

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  416. Recent advances in nanocellulose-based polymer nanocomposites

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  417. Thermal conductivity behavior of oil palm/jute fibre-reinforced hybrid composites

    Article • January 2017, American Institute of Physics

    Dr Mohammad Jawaid

  418. Introduction to biomass and its composites

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  419. Preface

    Article • Applied Surface Science, January 2017, Elsevier

    Dr Mohammad Jawaid

  420. Thermal properties of oil palm biomass based composites

    Article • January 2017, Elsevier

    Dr Mohammad Jawaid

  421. Effect of seaweed on physical properties of thermoplastic sugar palm starch/agar composites

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, December 2016, Universiti Malaysia Pahang Publisher

    Dr Mohammad Jawaid

  422. Expert Material Selection for Manufacturing of Green Bio Composites

    Article • November 2016, Springer Science + Business Media

    Dr Mohammad Jawaid

  423. Mechanical and Thermal Properties of Polypropylene Reinforced with Doum Fiber: Impact of Fibrillization

    Article • November 2016, Springer Science + Business Media

    Dr Mohammad Jawaid

  424. Natural Fiber Improvement by Laccase; Optimization, Characterization and Application in Medium Density Fiberboard

    Article • Journal of Natural Fibers, October 2016, Taylor & Francis

    Dr Mohammad Jawaid

  425. Experimental Investigation of Cellulose/Silver Nanocomposites Using In Situ Generation Method

    Article • Journal of Polymers and the Environment, October 2016, Springer Science + Business Media

    Dr Mohammad Jawaid

  426. A review on potential development of flame retardant kenaf fibers reinforced polymer composites

    Article • Polymers for Advanced Technologies, September 2016, Wiley

    Miss Naheed saba, Dr Mohammad Jawaid

  427. Fibre metal laminates

    Article • Journal of Reinforced Plastics and Composites, September 2016, SAGE Publications

    Mr Chandrasekar Muthukumar, Dr Mohammad Jawaid, Dr Suhad D. Salman

  428. Preparation and Characterization of Cassava Starch/Peel Composite Film

    Article • Polymer Composites, September 2016, Wiley

    Dr Mohammad Jawaid

  429. Mechanical and Thermal Properties of Roselle Fibre Reinforced Vinyl Ester Composites

    Article • BioResources, September 2016, BioResources

    Dr Mohammad Jawaid

  430. A Review on the Tensile Properties of Bamboo Fiber Reinforced Polymer Composites

    Article • BioResources, September 2016, BioResources

    Dr Mohammad Jawaid

  431. Effect of Alkali and Silane Treatments on Mechanical and Fibre-matrix Bond Strength of Kenaf and Pineapple Leaf Fibres

    Article • Journal of Bionic Engineering, September 2016, Springer Science + Business Media

    Dr Mohammad Jawaid

  432. Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties

    Article • International Journal of Biological Macromolecules, August 2016, Elsevier

    Dr Mohammad Jawaid

  433. Development and characterization of sugar palm starch and poly(lactic acid) bilayer films

    Article • Carbohydrate Polymers, August 2016, Elsevier

    Dr Mohammad Jawaid

  434. The mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites

    Article • International Journal of Precision Engineering and Manufacturing, August 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  435. Physicochemical and thermal properties of lignocellulosic fiber from sugar palm fibers: effect of treatment

    Article • Cellulose, July 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  436. Water Absorption Behaviour and Impact Strength of Kenaf-Kevlar Reinforced Epoxy Hybrid Composites

    Article • July 2016, SAGE Publications

    Dr RIDWAN YAHAYA, Dr Suhad D. Salman, Dr Mohammad Jawaid

  437. Effect of various plasticizers and concentration on the physical, thermal, mechanical, and structural properties of cassava-starch-based films

    Article • Starch - Stärke, June 2016, Wiley

    Dr Mohammad Jawaid

  438. Effect of Sugar Palm-derived Cellulose Reinforcement on the Mechanical and Water Barrier Properties of Sugar Palm Starch Biocomposite Films

    Article • BioResources, March 2016, BioResources

    Dr Mohammad Jawaid

  439. A review on dynamic mechanical properties of natural fibre reinforced polymer composites

    Article • Construction and Building Materials, March 2016, Elsevier

    Dr Mohammad Jawaid

  440. The effects of chemical treatment on the structural and thermal, physical, and mechanical and morphological properties of roselle fiber-reinforced vinyl ester composites

    Article • Polymer Composites, February 2016, Wiley

    Dr Mohammad Jawaid

  441. Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application

    Article • Defence Technology, February 2016, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  442. Investigating ballistic impact properties of woven kenaf-aramid hybrid composites

    Article • Fibers and Polymers, February 2016, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  443. Recent developments in sugar palm ( Arenga pinnata ) based biocomposites and their potential industrial applications: A review

    Article • Renewable and Sustainable Energy Reviews, February 2016, Elsevier

    Dr Mohammad Jawaid

  444. Characterisation and Biodegradation of Poly(Lactic Acid) Blended with Oil Palm Biomass and Fertiliser for Bioplastic Fertiliser Composites

    Article • BioResources, January 2016, BioResources

    Dr Mohammad Jawaid

  445. Measurement of ballistic impact properties of woven kenaf–aramid hybrid composites

    Article • Measurement, January 2016, Elsevier

    Dr Mohammad Jawaid, Dr Suhad D. Salman

  446. Effect of accelerated environmental aging on tensile properties of oil palm/jute hybrid composites

    Article • January 2016, American Institute of Physics

    Dr Mohammad Jawaid

  447. Isolation and Characterization of Cellulose Nanofibers fromGigantochloa scortechiniias a Reinforcement Material

    Article • Journal of Nanomaterials, January 2016, Hindawi Publishing Corporation

    Dr Mohammad Jawaid

  448. Recent Advances in Nanoclay/Natural Fibers Hybrid Composites

    Article • January 2016, Springer Science + Business Media

    Dr Mohammad Jawaid

  449. A Review on Roselle Fiber and Its Composites

    Article • Journal of Natural Fibers, December 2015, Taylor & Francis

    Dr Mohammad Jawaid

  450. A review on flammability of epoxy polymer, cellulosic and non-cellulosic fiber reinforced epoxy composites

    Article • Polymers for Advanced Technologies, December 2015, Wiley

    Dr Mohammad Jawaid

  451. Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications

    Article • Journal of Reinforced Plastics and Composites, November 2015, SAGE Publications

    Dr Mohammad Jawaid

  452. Hybrid Particleboard Made from Bamboo (Dendrocalamus asper) Veneer Waste and Rubberwood (Hevea brasilienses)

    Article • BioResources, November 2015, BioResources

    Dr Mohammad Jawaid

  453. Material Characterization of Roselle Fibre ([i]Hibiscus sabdariffa [/i]L.) as Potential Reinforcement Material for Polymer Composites

    Article • Fibres and Textiles in Eastern Europe, October 2015, Index Copernicus

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  454. Physical and morphological properties of nanoclay in low molecular weight phenol formaldehyde resin by ultrasonication

    Article • International Journal of Adhesion and Adhesives, October 2015, Elsevier

    Dr Mohammad Jawaid

  455. Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging

    Article • Journal of Food Science and Technology, September 2015, Springer Science + Business Media

    Dr Mohammad Jawaid

  456. Natural fiber pultruded composites

    Article • Journal of Composite Materials, September 2015, SAGE Publications

    Fariborz Hashemi, Dr Mohammad Jawaid

  457. Physical, mechanical and biodegradable properties of kenaf/coir hybrid fiber reinforced polymer nanocomposites

    Article • Materials Today Communications, September 2015, Elsevier

    Dr Mohammad Jawaid

  458. Natural fiber reinforced conductive polymer composites as functional materials: A review

    Article • Synthetic Metals, August 2015, Elsevier

    Dr Faris M. AL-Oqla, Dr Mohammad Jawaid

  459. Mechanical and Thermal Properties of Polypropylene Reinforced with Almond Shells Particles: Impact of Chemical Treatments

    Article • Journal of Bionic Engineering, July 2015, Elsevier

    Dr Abou el kacem Qaiss, Dr Mohammad Jawaid

  460. Mechanical and thermal properties of SEBS-g-MA compatibilized halloysite nanotubes reinforced polyethylene terephthalate/polycarbonate/nanocomposites

    Article • Journal of Applied Polymer Science, June 2015, Wiley

    Dr Mohammad Jawaid, Dr Ibrahim M Inuwa

  461. Effect of Plasticizer Type and Concentration on Dynamic Mechanical Properties of Sugar Palm Starch–Based Films

    Article • International Journal of Polymer Analysis and Characterization, June 2015, Taylor & Francis

    Dr Mohammad Jawaid

  462. Effect of Plasticizer Type and Concentration on Tensile, Thermal and Barrier Properties of Biodegradable Films Based on Sugar Palm (Arenga pinnata) Starch

    Article • Polymers, June 2015, MDPI AG

    Dr Mohammad Jawaid

  463. Evaluation of mechanical, morphological, and biodegradable properties of hybrid natural fiber polymer nanocomposites

    Article • Polymer Composites, May 2015, Wiley

    Dr MD SAIFUL ISLAM, Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  464. Cassava: Its polymer, fiber, composite, and application

    Article • Polymer Composites, May 2015, Wiley

    Dr Mohammad Jawaid

  465. Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: Effect of compatibilization on thermomechanical properties and thermal stability

    Article • Journal of Vinyl and Additive Technology, April 2015, Wiley

    Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  466. Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  467. Effects of Halloysite Nanotubes on Mechanical and Thermal Stability of Poly(Ethylene Terephthalate)/Polycarbonate Nanocomposites

    Article • Applied Mechanics and Materials, February 2015, Trans Tech Publications

    Dr Mohammad Jawaid

  468. Potential of bioenergy production from industrial kenaf (Hibiscus cannabinus L.) based on Malaysian perspective

    Article • Renewable and Sustainable Energy Reviews, February 2015, Elsevier

    Dr Khalid Rehman Hakeem, Dr Mohammad Jawaid

  469. Mechanical properties of kenaf fibre reinforced polymer composite: A review

    Article • Construction and Building Materials, February 2015, Elsevier

    Dr Mohammad Jawaid

  470. A Study on Chemical Composition, Physical, Tensile, Morphological, and Thermal Properties of Roselle Fibre: Effect of Fibre Maturity

    Article • BioResources, January 2015, BioResources

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  471. Thermo-physical, thermal degradation, and flexural properties of betel nut husk fiber reinforced vinyl ester composites

    Article • Polymer Composites, January 2015, Wiley

    Prof Mariatti M. Mariatti Jaafar, Dr Mohammad Jawaid

  472. Natural Fiber-Reinforced Hybrid Polymer Nanocomposites: Effect of Fiber Mixing and Nanoclay on Physical, Mechanical, and Biodegradable Properties

    Article • BioResources, January 2015, BioResources

    Dr Mohammad Jawaid

  473. Agricultural Biomass Based Potential Materials

    Article • January 2015, Springer Science + Business Media

    Dr Mohammad Jawaid, Dr Khalid Rehman Hakeem

  474. Manufacturing of Natural Fibre Reinforced Polymer Composites

    Article • January 2015, Springer Science + Business Media

    Dr Mohammad Jawaid, Professor S.M. Sapuan, Prof Dr Md Enamul Hoque

  475. A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

    Article • International Journal of Polymer Science, January 2015, Hindawi Publishing Corporation

    Dr Mohammad Jawaid

  476. Potential Utilization of Kenaf Biomass in Different Applications

    Article • January 2015, Springer Science + Business Media

    Dr Mohammad Jawaid

  477. The use of bamboo fibres as reinforcements in composites

    Article • January 2015, Elsevier

    Dr Mohammad Jawaid

  478. A Review on Pineapple Leaves Fibre and Its Composites

    Article • International Journal of Polymer Science, January 2015, Hindawi Publishing Corporation

    Dr Mohammad Jawaid

  479. Cellulosic Nanocomposites from Natural Fibers for Medical Applications: A Review

    Article • December 2014, Springer Science + Business Media

    Dr Mohammad Jawaid

  480. Influence of exfoliated graphite nanoplatelets on the flammability and thermal properties of polyethylene terephthalate/polypropylene nanocomposites

    Article • Polymer Degradation and Stability, December 2014, Elsevier

    MR Wong Syie Luing, Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  481. Physical, mechanical, and biodegradable properties of meranti wood polymer composites

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Prof Dr Md Enamul Hoque, Dr Mohammad Jawaid

  482. Effect of Kenaf Cellulose Whiskers on Cellulose Acetate Butyrate Nanocomposites Properties

    Article • November 2014, Wiley

    Dr Mohammad Jawaid

  483. Mechanical performance of woven kenaf-Kevlar hybrid composites

    Article • Journal of Reinforced Plastics and Composites, November 2014, SAGE Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  484. Quasi-static penetration and ballistic properties of kenaf–aramid hybrid composites

    Article • Materials & Design (1980-2015), November 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  485. Effect of Alkali Treatment on the Physical, Mechanical, and Morphological Properties of Waste Betel Nut (Areca catechu) Husk Fibre

    Article • BioResources, October 2014, BioResources

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Prof Mariatti M. Mariatti Jaafar

  486. Variations in Moisture Content Affect the Shrinkage of Gigantochloa scortechinii and Bambusa vulgaris at Different Heights of the Bamboo Culm

    Article • BioResources, October 2014, BioResources

    Dr Mohammad Jawaid

  487. Effect of montmorillonite (MMT) content on the mechanical, oxygen barrier, and thermal properties of rice husk/MMT hybrid filler-filled low-density polyethylene nanocomposite blown films

    Article • Journal of Thermoplastic Composite Materials, October 2014, SAGE Publications

    Dr Mohammad Jawaid

  488. Measurement of mechanical and physical properties of particleboard by hybridization of kenaf with rubberwood particles

    Article • Measurement, October 2014, Elsevier

    Dr Mohammad Jawaid

  489. A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites

    Article • Polymers, August 2014, MDPI AG

    Dr Mohammad Jawaid

  490. Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites

    Article • Materials & Design (1980-2015), June 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  491. Effect of resin content and pressure on the performance properties of rubberwood-kenaf composite Board Panel

    Article • Fibers and Polymers, June 2014, Springer Science + Business Media

    Dr Mohammad Jawaid

  492. The Effect of Additives on Bending Strenght of Pultruded Hybrid Reinforced Resol Type Phenolic Composite

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Dr Mohammad Jawaid

  493. Effect of fibers treatment on dynamic mechanical and thermal properties of epoxy hybrid composites

    Article • Polymer Composites, May 2014, Wiley

    Miss Naheed saba, Dr Mohammad Jawaid

  494. Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners

    Article • Polymer Composites, April 2014, Wiley

    Professor S.M. Sapuan, Dr RIDWAN YAHAYA, Dr Mohammad Jawaid, Dr Suhad D. Salman

  495. Effect of Post Curing, Fibre Content and Resin-Hardener Mixing Ratio on the Properties of Kenaf-Aramid Hybrid Composites

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  496. Influence of Natural and Accelerated Weathering on the Mechanical Properties of Low-Density Polyethylene Films

    Article • International Journal of Polymer Analysis and Characterization, March 2014, Taylor & Francis

    Dr Mohammad Jawaid

  497. Influence of Planting Density on the Fiber Morphology and Chemical Composition of a New Latex-timber Clone Tree of Rubberwood (Hevea brasiliensis Muell. Arg.)

    Article • BioResources, March 2014, BioResources

    Dr Mohammad Jawaid, Dr Khalid Rehman Hakeem

  498. Medium Density Fibreboard Made from Kenaf (Hibiscus cannabinus L.) Stem: Effect of Thermo-mechanical Refining and Resin Content

    Article • BioResources, March 2014, BioResources

    Dr Mohammad Jawaid

  499. Thermal and biodegradation properties of poly(lactic acid)/fertilizer/oil palm fibers blends biocomposites

    Article • Polymer Composites, March 2014, Wiley

    Dr Mohammad Jawaid

  500. Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

    Article • Journal of Applied Polymer Science, March 2014, Wiley

    Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  501. Mechanical and thermal properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

    Article • Polymer Composites, January 2014, Wiley

    Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  502. Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites

    Article • International Journal of Polymer Analysis and Characterization, January 2014, Taylor & Francis

    Dr Mohammad Jawaid

  503. Effect of Chemical Modifications of Fibers on Tensile Properties of Epoxy Hybrid Composites

    Article • International Journal of Polymer Analysis and Characterization, January 2014, Taylor & Francis

    Dr Mohammad Jawaid

  504. Processing and Properties of Date Palm Fibers and Its Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla, Dr Mohammad Jawaid

  505. Biomass and Bioenergy

    Article • January 2014, Springer Science + Business Media

    Dr Khalid Rehman Hakeem, Dr Mohammad Jawaid

  506. Biomass and Bioenergy

    Article • January 2014, Springer Science + Business Media

    Dr Khalid Rehman Hakeem, Dr Mohammad Jawaid

  507. Application of Biomass-Derived Catalyst

    Article • January 2014, Springer Science + Business Media

    Dr Mohammad Jawaid

  508. Enhanced mechanical and thermal properties of CNT/HDPE nanocomposite using MMT as secondary filler

    Article • January 2014, American Institute of Physics

    Dr Agus Arsad, Dr Mohammad Jawaid

  509. Production and modification of nanofibrillated cellulose using various mechanical processes: A review

    Article • Carbohydrate Polymers, January 2014, Elsevier

    Professor Kumar Sudesh, Dr Mohammad Jawaid

  510. Agricultural Biomass Raw Materials: The Current State and Future Potentialities

    Article • January 2014, Springer Science + Business Media

    Dr Mohammad Jawaid

  511. Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications

    Article • Composites Part B Engineering, January 2014, Elsevier

    Dr Mohammad Jawaid

  512. Effect of PVA-co-MMA Copolymer on the Physical, Mechanical, and Thermal Properties of Tropical Wood Materials

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    Dr Mohammad Jawaid

  513. Lignocellulosic Materials as the Potential Source of Catalyst

    Article • January 2014, Springer Science + Business Media

    Dr Mohammad Jawaid

  514. Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites

    Article • Polymer Composites, December 2013, Wiley

    Dr Mohammad Jawaid

  515. Activated Carbon from Various Agricultural Wastes by Chemical Activation with KOH: Preparation and Characterization

    Article • Journal of Biobased Materials and Bioenergy, December 2013, American Scientific Publishers

    Dr Mohammad Jawaid

  516. Biomedical Properties of Edible Seaweed in Cancer Therapy and Chemoprevention Trials: A Review

    Article • Natural Product Communications, December 2013, SAGE Publications

    Dr Mohammad Jawaid

  517. Chitin based polyurethanes using hydroxyl terminated polybutadiene, part III: Surface characteristics

    Article • International Journal of Biological Macromolecules, November 2013, Elsevier

    Dr Muhammad Jawwad Saif, Dr Mohammad Jawaid

  518. Properties of polylactic acid composites reinforced with oil palm biomass microcrystalline cellulose

    Article • Carbohydrate Polymers, October 2013, Elsevier

    Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  519. Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash

    Article • Composites Part B Engineering, October 2013, Elsevier

    Dr Mohammad Jawaid

  520. Water Absorbency and Mechanical Properties of Kenaf Paper Blended via a Disintegration Technique

    Article • BioResources, September 2013, BioResources

    Dr Mohammad Jawaid

  521. A Jatropha biomass as renewable materials for biocomposites and its applications

    Article • Renewable and Sustainable Energy Reviews, June 2013, Elsevier

    Dr Mohammad Jawaid

  522. Mechanical Properties of Mica-Filled Polycarbonate/Poly(Acrylonitrile-Butadiene-Styrene) Composites

    Article • Polymer-Plastics Technology and Engineering, May 2013, Taylor & Francis

    Dr Mohammad Jawaid

  523. Fabricating Eco-Friendly Binderless Fiberboard from Laccase-Treated Rubber Wood Fiber

    Article • BioResources, May 2013, BioResources

    Dr Mohammad Jawaid

  524. Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy Nanocomposites

    Article • International Journal of Polymer Analysis and Characterization, May 2013, Taylor & Francis

    Dr Mohammad Jawaid

  525. A Review on Quality Enhancement of Oil Palm Trunk Waste by Resin Impregnation: Future Materials

    Article • BioResources, April 2013, BioResources

    Dr Mohammad Jawaid, Dr Khalid Rehman Hakeem

  526. Effect of Coupling Agent on Mechanical and Thermal Behaviour of Oil Palm/Jute Hybrid Composites

    Article • Advanced Materials Research, April 2013, Trans Tech Publications

    Dr Mohammad Jawaid

  527. Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites

    Article • Materials & Design (1980-2015), April 2013, Elsevier

    Dr Ibrahim M Inuwa, Dr Mohammad Jawaid

  528. Isolation and characterization of microcrystalline cellulose from oil palm biomass residue

    Article • Carbohydrate Polymers, April 2013, Elsevier

    Dr Mohammad Jawaid

  529. Effect of Triacetin on Tensile Properties of Oil Palm Empty Fruit Bunch Fiber-Reinforced Polylactic Acid Composites

    Article • Polymer-Plastics Technology and Engineering, March 2013, Taylor & Francis

    Dr Mohammad Jawaid

  530. Epoxidized natural rubber toughened polylactic acid/talc composites: Mechanical, thermal, and morphological properties

    Article • Journal of Composite Materials, March 2013, SAGE Publications

    Dr Mohammad Jawaid

  531. Effects of Temperature and Time on the Morphology, pH, and Buffering Capacity of Bast and Core Kenaf Fibres

    Article • BioResources, February 2013, BioResources

    Dr Mohammad Jawaid

  532. Electrical and flammability properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer composites as insulators in cable applications

    Article • Polymer Engineering & Science, February 2013, Wiley

    Dr Mohammad Jawaid

  533. Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites

    Article • Composites Part B Engineering, February 2013, Elsevier

    Dr Mohammad Jawaid

  534. Flame Retardancy and Kinetic Behavior of Ammonium Polyphosphate–Treated Unsaturated Polyester/Phenolic Interpenetrating Polymer Network

    Article • International Journal of Polymer Analysis and Characterization, February 2013, Taylor & Francis

    Dr Mohammad Jawaid

  535. Tensile, Electrical Conductivity, and Morphological Properties of Carbon Black–Filled Epoxy Composites

    Article • International Journal of Polymer Analysis and Characterization, January 2013, Taylor & Francis

    Dr Mohammad Jawaid

  536. Effect of Fiber Treatment on Dimensional Stability and Chemical Resistance Properties of Hybrid Composites

    Article • International Journal of Polymer Analysis and Characterization, January 2013, Taylor & Francis

    Dr Mohammad Jawaid

  537. Optimization of Blending Parameters and Fiber Size of Kenaf-Bast-Fiber-Reinforced the Thermoplastic Polyurethane Composites by Taguchi Method

    Article • Advances in Materials Science and Engineering, January 2013, Hindawi Publishing Corporation

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros, Dr Mohammad Jawaid

  538. Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends

    Article • Journal of Polymer Engineering, January 2013, De Gruyter

    Dr Mohammad Jawaid

  539. Natural fiber reinforced poly(vinyl chloride) composites: A review

    Article • Journal of Reinforced Plastics and Composites, December 2012, SAGE Publications

    Dr Mohammad Jawaid

  540. Physical and thermal properties of microwave-dried wood lumber impregnated with phenol formaldehyde resin

    Article • Journal of Composite Materials, December 2012, SAGE Publications

    Dr Mohammad Jawaid

  541. Bamboo fibre reinforced biocomposites: A review

    Article • Materials & Design (1980-2015), December 2012, Elsevier

    Dr Mohammad Jawaid

  542. Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites

    Article • Journal of Composite Materials, November 2012, SAGE Publications

    Dr Mohammad Jawaid

  543. Preparation of activated carbon filled epoxy nanocomposites

    Article • Journal of Thermal Analysis and Calorimetry, October 2012, Springer Science + Business Media

    Dr Mohammad Jawaid

  544. EFFECT OF DEGREE OF DEACETYLATION OF CHITOSAN ON THERMAL STABILITY AND COMPATIBILITY OF CHITOSAN-POLYAMIDE BLEND

    Article • BioResources, September 2012, BioResources

    Dr Mohammad Jawaid

  545. Effect of jute fibre loading on the mechanical and thermal properties of oil palm–epoxy composites

    Article • Journal of Composite Materials, June 2012, SAGE Publications

    Dr Mohammad Jawaid

  546. New Approach to Oil Palm Trunk Core Lumber Material Properties Enhancement via Resin Impregnation

    Article • Journal of Biobased Materials and Bioenergy, June 2012, American Scientific Publishers

    Dr Mohammad Jawaid

  547. BI-LAYER HYBRID BIOCOMPOSITES: CHEMICAL RESISTANT AND PHYSICAL PROPERTIES

    Article • BioResources, April 2012, BioResources

    Dr Mohammad Jawaid

  548. Woven hybrid biocomposites: Dynamic mechanical and thermal properties

    Article • Composites Part A Applied Science and Manufacturing, February 2012, Elsevier

    Dr Mohammad Jawaid

  549. Cell Wall Morphology, Chemical and Thermal Analysis of Cultivated Pineapple Leaf Fibres for Industrial Applications

    Article • Journal of Polymers and the Environment, November 2011, Springer Science + Business Media

    Dr Mohammad Jawaid

  550. Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review

    Article • Carbohydrate Polymers, August 2011, Elsevier

    Dr Mohammad Jawaid

  551. Impact Properties of Natural Fiber Hybrid Reinforced Epoxy Composites

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Dr Mohammad Jawaid

  552. Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites

    Article • Materials Science and Engineering A, June 2011, Elsevier

    Dr Mohammad Jawaid

  553. Hybrid composites of oil palm empty fruit bunches/woven jute fiber: chemical resistance, physical, and impact properties

    Article • Journal of Composite Materials, May 2011, SAGE Publications

    Dr Mohammad Jawaid

  554. Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites

    Article • Materials & Design (1980-2015), February 2011, Elsevier

    Dr Mohammad Jawaid

  555. Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

    Article • Materials Science and Engineering A, November 2010, Elsevier

    Dr Mohammad Jawaid

  556. Development and material properties of new hybrid medium density fibreboard from empty fruit bunch and rubberwood

    Article • Materials & Design (1980-2015), October 2010, Elsevier

    Dr Mohammad Jawaid

  557. Empty Fruit Bunches as a Reinforcement in Laminated Bio-composites

    Article • Journal of Composite Materials, September 2010, SAGE Publications

    Dr Mohammad Jawaid

  558. Exploring chemical analysis of vermicompost of various oil palm fibre wastes

    Article • The Environmentalist, July 2010, Springer Science + Business Media

    Dr Mohammad Jawaid

  559. Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties

    Article • Journal of Polymers and the Environment, June 2010, Springer Science + Business Media

    Dr Mohammad Jawaid

  560. Hybrid Composites Made from Oil Palm Empty Fruit Bunches/Jute Fibres: Water Absorption, Thickness Swelling and Density Behaviours

    Article • Journal of Polymers and the Environment, May 2010, Springer Science + Business Media

    Dr Mohammad Jawaid

  561. Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber

    Article • Industrial Crops and Products, January 2010, Elsevier

    Dr Mohammad Jawaid

  562. Development and material properties of new hybrid plywood from oil palm biomass

    Article • Materials & Design (1980-2015), January 2010, Elsevier

    Dr Mohammad Jawaid

  563. Selective Solvent Extraction of the Bark ofRhizophora apiculataas an Anti-Termite Agent againstCoptotermes gestroi

    Article • Journal of Wood Chemistry and Technology, November 2009, Taylor & Francis

    Dr Mohammad Jawaid

  564. Recycled Polypropylene-Oil Palm Biomass: The Effect on Mechanical and Physical Properties

    Article • Journal of Reinforced Plastics and Composites, June 2009, SAGE Publications

    Dr Mohammad Jawaid

  565. The Effect of Soil Burial Degradation of Oil Palm Trunk Fiber-filled Recycled Polypropylene Composites

    Article • Journal of Reinforced Plastics and Composites, June 2009, SAGE Publications

    Dr Mohammad Jawaid

  566. Agro-wastes: Mechanical and physical properties of resin impregnated oil palm trunk core lumber

    Article • Polymer Composites, January 2009, Wiley

    Dr Mohammad Jawaid