All Stories

  1. Effect of Heat Treatment on Elastic Properties and Fracture Toughness of Fused Filament Fabricated PEEK for Biomedical Applications

    Article • Polymers, December 2022, MDPI AG

    Professor Vadim V Silberschmidt

  2. In silico evaluation of additively manufactured 316L stainless steel stent in a patient-specific coronary artery

    Article • Medical Engineering & Physics, November 2022, Elsevier

    Professor Vadim V Silberschmidt

  3. Inelastic Deformation of Coronary Stents: Two-Level Model

    Article • Materials, October 2022, MDPI AG

    Professor Vadim V Silberschmidt

  4. Biocompatibility of 3D-Printed PLA, PEEK and PETG: Adhesion of Bone Marrow and Peritoneal Lavage Cells

    Article • Polymers, September 2022, MDPI AG

    Professor Vadim V Silberschmidt

  5. Mesoscale damage behavior and meso-macroscale correlation of low-cycle fatigue in Z2CND18.12N austenitic stainless steel

    Article • Materials Science and Engineering A, September 2022, Elsevier

    Professor Vadim V Silberschmidt

  6. Dynamic Crack Propagation along Elastic Interfaces in Double Cantilever Beams under High Loading Rates

    Article • Journal of Aerospace Engineering, July 2022, American Society of Civil Engineers (ASCE)

    Professor Vadim V Silberschmidt

  7. Exploring the Mechanical Properties and Performance of Type-I Collagen at Various Length Scales: A Progress Report

    Article • Materials, April 2022, MDPI AG

    Professor Vadim V Silberschmidt

  8. Fracture behaviour and toughening mechanisms of dry and wet collagen

    Article • Acta Biomaterialia, April 2022, Elsevier

    Professor Vadim V Silberschmidt

  9. Preface

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

  10. Personalised nitinol stent for focal plaques: Design and evaluation

    Article • Journal of Biomechanics, January 2022, Elsevier

    Professor Vadim V Silberschmidt

  11. Deformation and fracture behaviors of long-fiber hydrogels

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

  12. Numerical modeling of hydrogels: from microscopic network to macroscopic material

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

  13. A numerical study on influence of strain gradients on lattice rotation in micro-machining of a single crystal

    Article • Challenge Journal of Structural Mechanics, September 2021, Tulpar Academic Publishing

    Professor Vadim V Silberschmidt

  14. Remodelling of trabecular bone in human distal tibia: A model based on an in-vivo HR-pQCT study

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2021, Elsevier

    Professor Vadim V Silberschmidt

  15. Analytical corrections for double-cantilever beam tests

    Article • International Journal of Fracture, June 2021, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  16. Damage in extrusion additive manufactured biomedical polymer: Effects of testing direction and environment during cyclic loading

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2021, Elsevier

    Professor Vadim V Silberschmidt

  17. A computational study of fatigue resistance of nitinol stents subjected to walk‐induced femoropopliteal artery motion

    Article • Journal of Biomechanics, March 2021, Elsevier

    Professor Vadim V Silberschmidt

  18. Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion

    Article • Journal of the Mechanical Behavior of Biomedical Materials, March 2021, Elsevier

    Professor Vadim V Silberschmidt

  19. Analytical prediction of shear angle and frictional behaviour in vibration-assisted cutting

    Article • Journal of Manufacturing Processes, February 2021, Elsevier

    Professor Vadim V Silberschmidt

  20. ZigZagZ: Improving mechanical performance in extrusion additive manufacturing by nonplanar toolpaths

    Article • Additive Manufacturing, February 2021, Elsevier

    Professor Vadim V Silberschmidt

  21. Mechanical performance of 3D printed polylactide during degradation

    Article • Additive Manufacturing, February 2021, Elsevier

    Professor Vadim V Silberschmidt

  22. Damage and fracture of biological and biomedical materials

    Article • Engineering Fracture Mechanics, January 2021, Elsevier

    Professor Vadim V Silberschmidt

  23. CONVEX (CONtinuously Varied EXtrusion): A new scale of design for additive manufacturing

    Article • Additive Manufacturing, January 2021, Elsevier

    Professor Vadim V Silberschmidt

  24. Anisotropic mechanical behaviour of calendered nonwoven fabrics: Strain-rate dependency

    Article • Journal of Composite Materials, December 2020, SAGE Publications

    Professor Vadim V Silberschmidt

  25. Dry vs. wet: Properties and performance of collagen films. Part II. Cyclic and time-dependent behaviours

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2020, Elsevier

    Professor Vadim V Silberschmidt

  26. Size effect in flexural behaviour of unidirectional GFRP composites

    Article • Journal of Mechanical Science and Technology, December 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  27. Delamination propagation under high loading rate

    Article • Composite Structures, December 2020, Elsevier

    Professor Vadim V Silberschmidt

  28. Fractal approaches in mechanics of jointed rocks

    Article • November 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

  29. High-impact exercise stimulated localised adaptation of microarchitecture across distal tibia in postmenopausal women

    Article • Osteoporosis International, November 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  30. Dry vs. wet: Properties and performance of collagen films. Part I. Mechanical behaviour and strain-rate effect

    Article • Journal of the Mechanical Behavior of Biomedical Materials, November 2020, Elsevier

    Professor Vadim V Silberschmidt

  31. Theory of dynamic mode-II delamination in end-loaded split tests

    Article • Composites Part C Open Access, November 2020, Elsevier

    Professor Vadim V Silberschmidt

  32. Modelling indentation of human lower-limb soft tissue: simulation parameters and their effects

    Article • Continuum Mechanics and Thermodynamics, October 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  33. Editorial: 22nd European Conference on Fracture (ECF 22)

    Article • International Journal of Fatigue, October 2020, Elsevier

    Professor Vadim V Silberschmidt

  34. Scale invariance in stochastic fracture of rocks

    Article • September 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

  35. Improvements of material removal in cortical bone via impact cutting method

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2020, Elsevier

    Professor Vadim V Silberschmidt

  36. Structural integrity analysis and damage assessment of a long composite wind turbine blade under extreme loading

    Article • Composite Structures, August 2020, Elsevier

    Professor Vadim V Silberschmidt

  37. Simulations of Machining Processes at Small Spatio-temporal Scales

    Article • July 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  38. Printed hydrogel nanocomposites: fine-tuning nanostructure for anisotropic mechanical and conductive properties

    Article • Advanced Composites and Hybrid Materials, July 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  39. Numerical study of crack initiation and growth in human cortical bone: Effect of micro-morphology

    Article • Engineering Fracture Mechanics, June 2020, Elsevier

    Professor Vadim V Silberschmidt

  40. Mechanism of material removal in orthogonal cutting of cortical bone

    Article • Journal of the Mechanical Behavior of Biomedical Materials, April 2020, Elsevier

    Professor Vadim V Silberschmidt

  41. Shear band widening mechanism in Ti–6Al–4V under high strain rate deformation

    Article • Journal of Materials Research, March 2020, Cambridge University Press

    Professor Vadim V Silberschmidt

  42. Mechanical modification of bacterial cellulose hydrogel under biaxial cyclic tension

    Article • Mechanics of Materials, March 2020, Elsevier

    Professor Vadim V Silberschmidt

  43. Special Issue on Vibro-impact and friction dynamics

    Article • Journal of Sound and Vibration, March 2020, Elsevier

    Professor Vadim V Silberschmidt

  44. Effect of microstructure on porosity of random fibrous networks

    Article • Journal of the Textile Institute, February 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

  45. Production of high-quality extremely-thin histological sections by ultrasonically assisted cutting

    Article • Journal of Materials Processing Technology, February 2020, Elsevier

    Professor Vadim V Silberschmidt

  46. Dynamic delamination on elastic interface

    Article • Composite Structures, February 2020, Elsevier

    Professor Vadim V Silberschmidt

  47. Fracture of 3D-printed polymers: Crucial role of filament-scale geometric features

    Article • Engineering Fracture Mechanics, February 2020, Elsevier

    Professor Vadim V Silberschmidt

  48. Effect of environment on mechanical properties of 3D printed polylactide for biomedical applications

    Article • Journal of the Mechanical Behavior of Biomedical Materials, February 2020, Elsevier

    Professor Vadim V Silberschmidt

  49. Intelligent Manipulator with Flexible Link and Joint: Modeling and Vibration Control

    Article • Shock and Vibration, January 2020, Hindawi Publishing Corporation

    Professor Vadim V Silberschmidt

  50. Experimental investigation on the effect of drill quality on the performance of bone drilling

    Article • Biomedical Engineering / Biomedizinische Technik, January 2020, De Gruyter

    Dr Khurshid Alam, Professor Vadim V Silberschmidt

  51. Mechanistic evaluation of long-term in-stent restenosis based on models of tissue damage and growth

    Article • Biomechanics and Modeling in Mechanobiology, January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  52. A brief review on the mechanical behavior of nonwoven fabrics

    Article • Journal of Engineered Fibers and Fabrics, January 2020, SAGE Publications

    Professor Vadim V Silberschmidt

  53. High-Speed Mode-I Delamination

    Article • January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  54. Machining in monocrystals

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

  55. Mechanics of ultrasonically assisted drilling

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

  56. Microstructural changes in machining

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

  57. Dynamics and Thermodynamics of Fracture Mechanics

    Article • January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  58. Ballistic performance of polyurea-coated thin aluminium plates: numerical study

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  59. Damage in extrusion additive manufactured parts: effect of environment and cyclic loading

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  60. Fracture Behaviour of Collagen: Effect of Environment

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  61. Fracture of 3D-printed micro-tensile specimens: filament-scale geometry-induced anisotropy

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  62. Polyurea-coated glass-fibre-reinforced laminate under high-speed impact: experimental study

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  63. Trabecular bone remodelling: finite-element simulation

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

  64. A crystal-plasticity model of extruded AM30 magnesium alloy

    Article • Computational Materials Science, December 2019, Elsevier

    Professor Vadim V Silberschmidt

  65. Experimental and Numerical Methods to Analyse Deformation and Damage in Random Fibrous Networks

    Article • November 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  66. Modelling strain localization in Ti–6Al–4V at high loading rate: a phenomenological approach

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, November 2019, Royal Society Publishing

    Professor Vadim V Silberschmidt

  67. Finite element simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts

    Article • Journal of Micromanufacturing, November 2019, SAGE Publications

    Professor Vadim V Silberschmidt

  68. Ultrasonically assisted drilling in marble

    Article • Journal of Sound and Vibration, November 2019, Elsevier

    Professor Vadim V Silberschmidt

  69. Tensile properties of 3D multi-layer wrapping braided composite: Progressive damage analysis

    Article • Composites Part B Engineering, November 2019, Elsevier

    Professor Vadim V Silberschmidt

  70. Failure behaviour of short-fibre-reinforced PBT composites: Effect of strain rate

    Article • Engineering Failure Analysis, November 2019, Elsevier

    Professor Vadim V Silberschmidt

  71. A review: microstructure and properties of tin-silver-copper lead-free solder series for the applications of electronics

    Article • Soldering & Surface Mount Technology, October 2019, Emerald

    Professor Vadim V Silberschmidt

  72. Mesoscale damage analysis of needle-punched carbon/carbon composite considering randomness of inherent defects

    Article • Composites Science and Technology, October 2019, Elsevier

    Professor Vadim V Silberschmidt

  73. Damage and damping of short-glass-fibre-reinforced PBT composites under dynamic conditions: Effect of matrix behaviour

    Article • Composite Structures, October 2019, Elsevier

    Professor Vadim V Silberschmidt

  74. Initiation and growth of short cracks in a nickel-based single crystal superalloy

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

  75. Modelling crack-tip behaviour in a directionally solidified nickel alloy under fatigue-oxidation conditions

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

  76. Modelling the temperature and strain-rate effects of extruded magnesium alloy accounting for deformation slip and twinning

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

  77. Finite element evaluation of artery damage in deployment of polymeric stent with pre- and post-dilation

    Article • Biomechanics and Modeling in Mechanobiology, July 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  78. Deformation response and microstructural evolution of as-cast Mg alloys AM30 and AM50 during hot compression

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), June 2019, Carl Hanser Verlag

    Professor Vadim V Silberschmidt

  79. Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning

    Article • Journal of Materials Processing Technology, June 2019, Elsevier

    Professor Vadim V Silberschmidt

  80. Polydimethylsiloxane and poly(ether) ether ketone functionally graded composites for biomedical applications

    Article • Journal of the Mechanical Behavior of Biomedical Materials, May 2019, Elsevier

    Professor Vadim V Silberschmidt

  81. Mechanical and chemical characterisation of bioresorbable polymeric stent over two-year in vitro degradation

    Article • Journal of Biomaterials Applications, April 2019, SAGE Publications

    Professor Vadim V Silberschmidt

  82. Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining

    Article • Composites Part A Applied Science and Manufacturing, April 2019, Elsevier

    Professor Vadim V Silberschmidt

  83. Characterising variability and regional correlations of microstructure and mechanical competence of human tibial trabecular bone: An in-vivo HR-pQCT study

    Article • Bone, April 2019, Elsevier

    Professor Vadim V Silberschmidt

  84. Quantifying the mechanical properties of polymeric tubing and scaffold using atomic force microscopy and nanoindentation

    Article • Polymer Engineering & Science, March 2019, Wiley

    Professor Vadim V Silberschmidt

  85. Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel

    Article • Mechanics of Materials, March 2019, Elsevier

    Professor Vadim V Silberschmidt

  86. SPH-BEM simulation of underwater explosion and bubble dynamics near rigid wall

    Article • Science China Technological Sciences, February 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  87. Theoretical Analysis on Needle-Punched Carbon/Carbon Composites

    Article • Applied Composite Materials, January 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  88. Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part II – Numerical modelling

    Article • Engineering Fracture Mechanics, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  89. In-situ SEM study of slip-controlled short-crack growth in single-crystal nickel superalloy

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  90. Low-cycle fatigue of single crystal nickel-based superalloy – mechanical testing and TEM characterisation

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  91. When superhydrophobic coatings are icephobic: Role of surface topology

    Article • Surface and Coatings Technology, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  92. Nonwovens—Structure-process-property relationships

    Article • January 2019, Elsevier

    Professor Vadim V Silberschmidt

  93. Experimental Study of Synthesized Co-polymer for Stent Application

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  94. Characterisation of Mechanical Properties of Polymeric Stent using Nanoindentation

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  95. Characterisation of Additively Manufactured Metallic Stents

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  96. Finite Element Modelling of Stent Deployment in a Patient-specific Coronary Artery

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  97. Mechanical Performance of Self-expandable Nitinol Stent with Lesion-specific Design

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  98. Hybrid machining of metal-matrix composite

    Article • Procedia CIRP, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  99. Editorial

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

  100. IDENTIFICATION OF ELASTIC PARAMETERS OF COMPOSITE USING EXPERIMENTAL DATA ON MODAL CHARACTERISTICS OF SAMPLES

    Article • PNRPU Mechanics Bulletin, January 2019, PNRPU Publishing Office

    Professor Vadim V Silberschmidt

  101. Deformation and damage of random fibrous networks

    Article • International Journal of Solids and Structures, December 2018, Elsevier

    Professor Vadim V Silberschmidt

  102. Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part I – Deformation and damage behaviour

    Article • Engineering Fracture Mechanics, December 2018, Elsevier

    Professor Vadim V Silberschmidt

  103. Dynamic interfacial fracture of a double cantilever beam

    Article • Engineering Fracture Mechanics, December 2018, Elsevier

    Professor Vadim V Silberschmidt

  104. Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process

    Article • The International Journal of Advanced Manufacturing Technology, November 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  105. Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining

    Article • The International Journal of Advanced Manufacturing Technology, November 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  106. Damage accumulation in braided textiles-reinforced composites under repeated impacts: Experimental and numerical studies

    Article • Composite Structures, November 2018, Elsevier

    Professor Vadim V Silberschmidt

  107. Relations between Parameters of Fracture Processes on Different Scale Levels

    Article • Doklady Physics, November 2018, Pleiades Publishing Ltd

    Professor Vadim V Silberschmidt

  108. A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions

    Article • International Journal of Fracture, September 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  109. Mechanically Robust Transparent Anti-Icing Coatings: Roles of Dispersion Status of Titanate Nanotubes

    Article • Advanced Materials Interfaces, July 2018, Wiley

    Professor Vadim V Silberschmidt

  110. Influence of Tool Material on Forces, Temperature and Surface Quality of Ti-15333 Alloy in CT and UAT

    Article • Scientia Iranica, July 2018, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

    Professor Vadim V Silberschmidt

  111. Underwater explosion of cylindrical charge near plates: Analysis of pressure characteristics and cavitation effects

    Article • International Journal of Impact Engineering, July 2018, Elsevier

    Professor Vadim V Silberschmidt

  112. Hybrid machining process: experimental and numerical analysis of hot ultrasonically assisted turning

    Article • The International Journal of Advanced Manufacturing Technology, May 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  113. 3D DDD modelling of dislocation–precipitate interaction in a nickel-based single crystal superalloy under cyclic deformation

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2018, Taylor & Francis

    Professor Vadim V Silberschmidt

  114. A framework for design and optimization of tapered composite structures. Part II: Enhanced design framework with a global blending model

    Article • Composite Structures, March 2018, Elsevier

    Professor Vadim V Silberschmidt

  115. Experimental studies of shear bands in Zr-Cu metallic glass

    Article • Journal of Non-Crystalline Solids, March 2018, Elsevier

    Professor Vadim V Silberschmidt

  116. Transparent icephobic coatings using bio-based epoxy resin

    Article • Materials & Design, February 2018, Elsevier

    Professor Vadim V Silberschmidt

  117. Finite Element Modeling and Analysis of Ultrasonically-Assisted Drilling of Bone

    Article • January 2018, ACM (Association for Computing Machinery)

    Professor Vadim V Silberschmidt, Dr Khurshid Alam

  118. Microstructural evolution of 96.5Sn–3Ag–0.5Cu lead free solder reinforced with nickel-coated graphene reinforcements under large temperature gradient

    Article • Journal of Materials Science Materials in Electronics, January 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  119. 8.14 Composites Under Dynamic Loads at High Velocities

    Article • January 2018, Elsevier

    Professor Vadim V Silberschmidt

  120. Discontinuous Finite Element Model of Hydrogels

    Article • January 2018, Elsevier

    Professor Vadim V Silberschmidt

  121. Numerical Simulation of Bone Cutting

    Article • January 2018, Elsevier

    Professor Vadim V Silberschmidt

  122. Simulation of Crack Propagation Under Mixed-Mode Loading

    Article • January 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  123. Ultrasonically assisted drilling of rocks

    Article • January 2018, American Institute of Physics

    Professor Vadim V Silberschmidt

  124. Dynamics and Thermodynamics of Fracture Mechanics

    Article • January 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  125. Ultrasonic Assisted Turning: A Comparative Study of Surface Integrity

    Article • January 2018, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  126. Computational Evaluation of Artery Damage in Stent Deployment

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  127. Dynamic interfacial fracture of a thin-layered structure

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  128. Effect of hybrid machining on structural integrity of aerospace-grade materials

    Article • Procedia CIRP, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  129. Experimental and Morphological Investigations of Fracture Behavior of PBT/TPEE

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  130. Interfacial fracture of 3D-printed bioresorbable polymers

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  131. Numerical and analytical model of long tubular bones with anisotropic distribution of elastic properties

    Article • Procedia Structural Integrity, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  132. Ultrasonically assisted drilling of aerospace CFRP/Ti stacks

    Article • Procedia CIRP, January 2018, Elsevier

    Professor Vadim V Silberschmidt

  133. Braided textile composites for sports protection: Energy absorption and delamination in impact modelling

    Article • Materials & Design, December 2017, Elsevier

    Professor Vadim V Silberschmidt

  134. Low cycle fatigue of a directionally solidified nickel-based superalloy: Testing, characterisation and modelling

    Article • Materials Science and Engineering A, December 2017, Elsevier

    Professor Vadim V Silberschmidt

  135. Effects of the Manufacturing Process on the Reliability of the Multilayer Structure in MetalMUMPs Actuators: Residual Stresses and Variation of Design Parameters

    Article • Micromachines, November 2017, MDPI AG

    Professor Vadim V Silberschmidt

  136. Application of Smoothed Particle Hydrodynamics in analysis of shaped-charge jet penetration caused by underwater explosion

    Article • Ocean Engineering, November 2017, Elsevier

    Professor Vadim V Silberschmidt

  137. Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V

    Article • International Journal of Mechanical Sciences, November 2017, Elsevier

    Professor Vadim V Silberschmidt

  138. Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder

    Article • Wear, November 2017, Elsevier

    Professor Vadim V Silberschmidt

  139. Relative behaviour of premature failures in adhesively plated RC beam using controllable and existing parameters

    Article • Composite Structures, November 2017, Elsevier

    Professor Vadim V Silberschmidt

  140. Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, October 2017, SAGE Publications

    Professor Vadim V Silberschmidt

  141. Comparison of plane-stress, generalized-plane-strain and 3D FEM elastic–plastic analyses of thick-walled cylinders subjected to radial thermal gradient

    Article • International Journal of Mechanical Sciences, October 2017, Elsevier

    Professor Vadim V Silberschmidt

  142. Temperature-dependent crystal-plasticity model for magnesium: A bottom-up approach

    Article • Mechanics of Materials, October 2017, Elsevier

    Professor Vadim V Silberschmidt

  143. Modelling of Damage Evolution in Braided Composites: Recent Developments

    Article • Mechanics of Advanced Materials and Modern Processes, August 2017, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  144. Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis

    Article • Scientia Iranica, August 2017, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

    Professor Vadim V Silberschmidt

  145. Modelling and Simulations of Nanoindentation in Single Crystals

    Article • August 2017, Wiley

    Professor Vadim V Silberschmidt

  146. Nanoindentation in Metallic Glasses

    Article • August 2017, Wiley

    Professor Vadim V Silberschmidt

  147. Numerical Representation of Multiple Premature Failures in Steel-Plated RC Beams

    Article • International Journal of Computational Methods, August 2017, World Scientific Pub Co Pte Lt

    Professor Vadim V Silberschmidt

  148. Assessing stiffness of nanofibres in bacterial cellulose hydrogels: Numerical-experimental framework

    Article • Materials Science and Engineering C, August 2017, Elsevier

    Professor Vadim V Silberschmidt

  149. Experimental and computational studies of poly-L-lactic acid for cardiovascular applications: recent progress

    Article • Mechanics of Advanced Materials and Modern Processes, July 2017, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  150. Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling

    Article • Journal of Medical and Biological Engineering, July 2017, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  151. Microstructural evolution of Ti6Al4V in ultrasonically assisted cutting: Numerical modelling and experimental analysis

    Article • Ultrasonics, July 2017, Elsevier

    Professor Vadim V Silberschmidt

  152. 174 Comparison of the mechanical performance of polymeric and metallic scaffolds – testing and modelling

    Article • Heart, June 2017, BMJ

    Professor Vadim V Silberschmidt

  153. Analysis of pulsed electroplasticity in metals

    Article • June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  154. Magneto-forming studies

    Article • June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  155. Computational modelling of wounded tissue subject to negative pressure wound therapy following trans-femoral amputation

    Article • Biomechanics and Modeling in Mechanobiology, May 2017, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  156. Evaluation of the chemical and biomechanical viscoelastic properties of decellularised tracheal scaffolds

    Article • Cytotherapy, May 2017, Elsevier

    Professor Vadim V Silberschmidt

  157. Micro CT Analysis of Dynamic Damage in Laminates: Impact vs. blast loading

    Article • Journal of Physics Conference Series, May 2017, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  158. Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling

    Article • Polymer Testing, April 2017, Elsevier

    Professor Vadim V Silberschmidt

  159. Failure analysis of plain woven glass/epoxy laminates: Comparison of off-axis and biaxial tension loadings

    Article • Polymer Testing, April 2017, Elsevier

    Professor Vadim V Silberschmidt

  160. Enhanced gradient crystal-plasticity study of size effects in aβ-titanium alloy

    Article • Modelling and Simulation in Materials Science and Engineering, March 2017, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  161. Retardation effects due to overloads in aluminium-alloy aeronautical components

    Article • Fatigue & Fracture of Engineering Materials & Structures, February 2017, Wiley

    roberto citarella, Professor Vadim V Silberschmidt

  162. Controlled failure warning and mitigation of prematurely failing beam through adhesive

    Article • Composite Structures, February 2017, Elsevier

    Professor Vadim V Silberschmidt

  163. Linear Ultrasonic Motor for Absolute Gravimeter

    Article • Ultrasonics, February 2017, Elsevier

    Professor Vadim V Silberschmidt

  164. Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications

    Article • Surface and Coatings Technology, February 2017, Elsevier

    Professor Vadim V Silberschmidt

  165. Damage response of steel plate to underwater explosion: Effect of shaped charge liner

    Article • International Journal of Impact Engineering, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  166. Dynamic damage in woven carbon/epoxy composites due to air blast

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  167. Editorial

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  168. Effect of micro-morphology of cortical bone tissue on fracture toughness and crack propagation

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  169. Effect of surgical defect localization on ultimate load-bearing capacity of human femur: finite-element energy-based assessment

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  170. Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling

    Article • International Journal of Additive and Subtractive Materials Manufacturing, January 2017, Inderscience Publishers

    Professor Vadim V Silberschmidt

  171. Impact damage in woven carbon fibre/epoxy laminates: analysis of damage and dynamic strain fields

    Article • Procedia Engineering, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  172. Notches in fibrous materials: micro-mechanisms of deformation and damage

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Vadim V Silberschmidt

  173. Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling

    Article • International Journal of Additive and Subtractive Materials Manufacturing, January 2017, Inderscience Publishers

    Professor Vadim V Silberschmidt

  174. Computational assessment of residual formability in sheet metal forming processes for sustainable recycling

    Article • International Journal of Mechanical Sciences, December 2016, Elsevier

    Professor Vadim V Silberschmidt

  175. Modelling plastic deformation in a single-crystal nickel-based superalloy using discrete dislocation dynamics

    Article • Mechanics of Advanced Materials and Modern Processes, November 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  176. SPH-FEM simulation of shaped-charge jet penetration into double hull: A comparison study for steel and SPS

    Article • Composite Structures, November 2016, Elsevier

    Professor Vadim V Silberschmidt

  177. Rotary ultrasonic bone drilling: Improved pullout strength and reduced damage

    Article • Medical Engineering & Physics, November 2016, Elsevier

    Professor Vadim V Silberschmidt

  178. Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal

    Article • International Journal of Mechanical Sciences, November 2016, Elsevier

    Professor Vadim V Silberschmidt

  179. Failure analysis of a frangible composite cover: A transient-dynamics study

    Article • Journal of Composite Materials, October 2016, SAGE Publications

    Professor Vadim V Silberschmidt

  180. Generation of higher harmonics in longitudinal vibration of beams with breathing cracks

    Article • Journal of Sound and Vibration, October 2016, Elsevier

    Professor Vadim V Silberschmidt

  181. Analysis of tool wear in ultrasonically assisted turning of  -Ti-15V-3Al-3Cr-3Sn alloy

    Article • Scientia Iranica, October 2016, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

    Professor Vadim V Silberschmidt

  182. Size-dependent crystal plasticity: From micro-pillar compression to bending

    Article • Mechanics of Materials, September 2016, Elsevier

    Professor Vadim V Silberschmidt

  183. Non-destructive defect detection for MEMS devices using transient thermography

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  184. Optical properties of graphene-based materials in transparent polymer matrices

    Article • Applied Physics Letters, August 2016, American Institute of Physics

    Professor Vadim V Silberschmidt

  185. Thermo-migration behavior of SAC305 lead-free solder reinforced with fullerene nanoparticles

    Article • Journal of Materials Science, August 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  186. Numerical assessment of residual formability in sheet metal products: towards design for sustainability

    Article • Journal of Physics Conference Series, August 2016, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  187. Effect of Machining on Shear-Zone Microstructure in Ti-15V-3Cr-3Al-3Sn: Conventional and Ultrasonically Assisted Turning

    Article • Journal of Materials Engineering and Performance, July 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  188. Retained ratio of reinforcement in SAC305 composite solder joints: effect of reinforcement type, processing and reflow cycle

    Article • Soldering & Surface Mount Technology, June 2016, Emerald

    Professor Vadim V Silberschmidt

  189. Through-thickness stress relaxation in bacterial cellulose hydrogel

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2016, Elsevier

    Professor Vadim V Silberschmidt

  190. Sequential permutation table method for optimization of stacking sequence in composite laminates

    Article • Composite Structures, May 2016, Elsevier

    Professor Vadim V Silberschmidt

  191. Performance of Sn–3.0Ag–0.5Cu composite solder with TiC reinforcement: Physical properties, solderability and microstructural evolution under isothermal ageing

    Article • Journal of Alloys and Compounds, May 2016, Elsevier

    Professor Vadim V Silberschmidt

  192. A framework for design and optimization of tapered composite structures. Part I: From individual panel to global blending structure

    Article • Composite Structures, May 2016, Elsevier

    Professor Vadim V Silberschmidt

  193. Effect of microstructure on anomalous strain-rate-dependent behaviour of bacterial cellulose hydrogel

    Article • Materials Science and Engineering C, May 2016, Elsevier

    Professor Vadim V Silberschmidt

  194. Noncontact blood perfusion mapping in clinical applications

    Article • April 2016, SPIE

    Professor Vadim V Silberschmidt

  195. Material model for modeling clay at high strain rates

    Article • International Journal of Impact Engineering, April 2016, Elsevier

    Professor Vadim V Silberschmidt

  196. Strength prediction for bi-axial braided composites by a multi-scale modelling approach

    Article • Journal of Materials Science, March 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  197. Effect of graphene-oxide enhancement on large-deflection bending performance of thermoplastic polyurethane elastomer

    Article • Composites Part B Engineering, March 2016, Elsevier

    Professor Vadim V Silberschmidt

  198. Effect of through-thickness compression on in-plane tensile strength of glass/epoxy composites: Experimental study

    Article • Polymer Testing, February 2016, Elsevier

    Professor Vadim V Silberschmidt

  199. Effect of morphological state of graphene on mechanical properties of nanocomposites

    Article • Journal of Materials Science, January 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  200. Microstructures and properties of new Sn–Ag–Cu lead-free solder reinforced with Ni-coated graphene nanosheets

    Article • Journal of Alloys and Compounds, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  201. Time-dependent rheological behaviour of bacterial cellulose hydrogel

    Article • Materials Science and Engineering C, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  202. COMPUTATIONAL MODELLING OF MECHANICAL BEHAVIOR OF BIOLOGICAL TISSUES FOR BIOMEDICAL APPLICATIONS

    Article • January 2016, ECCOMAS

    Professor Vadim V Silberschmidt

  203. Crystal-Plasticity Simulation of Micromachining of Single-Crystal Metal: Methodology and Analysis

    Article • January 2016, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  204. Dynamic Fracture in Carbon-fibre Composites: Effect of Steel and Ice Projectiles

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  205. Dynamic damage in FRPs

    Article • January 2016, Elsevier

    Professor Vadim V Silberschmidt

  206. Dynamic fracture in carbon-fibre composites: Air-blast loading

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  207. Dynamic large-deflection bending of laminates

    Article • January 2016, Elsevier

    Professor Vadim V Silberschmidt

  208. Formation of microcracks near surgical defect in femur: Assessment of ultimate loading conditions

    Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2016, Rzeszow University of Technology

    Professor Vadim V Silberschmidt

  209. Fracture Behaviour of Bacterial Cellulose Hydrogel: Microstructural Effect

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  210. Hybrid Cutting of Bio-tissues

    Article • Procedia CIRP, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  211. Introduction

    Article • January 2016, Elsevier

    Professor Vadim V Silberschmidt

  212. Ultrasonically Assisted Cutting of Bio-tissues in Microtomy

    Article • Physics Procedia, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  213. Ultrasonically-assisted Polymer Molding: An Evaluation

    Article • Physics Procedia, January 2016, Elsevier

    Professor Vadim V Silberschmidt

  214. Dynamic bending behaviour of woven composites for sports products: Experiments and damage analysis

    Article • Materials & Design, December 2015, Elsevier

    Professor Vadim V Silberschmidt

  215. Viscoelasticity of periodontal ligament: an analytical model

    Article • Mechanics of Advanced Materials and Modern Processes, November 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  216. Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment

    Article • Materials & Design, November 2015, Elsevier

    Professor Vadim V Silberschmidt

  217. Chemical functionalization of graphene oxide for improving mechanical and thermal properties of polyurethane composites

    Article • Materials & Design, November 2015, Elsevier

    Professor Vadim V Silberschmidt

  218. In-vitro experimental analysis and numerical study of temperature in bone drilling

    Article • Technology and Health Care, October 2015, IOS Press

    Professor Vadim V Silberschmidt

  219. Strain-gradient crystal-plasticity modelling of micro-cutting of b.c.c. single crystal

    Article • Meccanica, October 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  220. A new low-temperature hermetic composite edge seal for the fabrication of triple vacuum glazing

    Article • Vacuum, October 2015, Elsevier

    Professor Vadim V Silberschmidt

  221. Enhanced ultrasonically assisted turning of a β-titanium alloy

    Article • Applied Mechanics and Materials, October 2015, Trans Tech Publications

    Professor Vadim V Silberschmidt, Dr Riaz Muhammad, Dr Khurshid Alam

  222. Variation of cutting forces in machining of f.c.c. single crystals

    Article • Acta Mechanica, August 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  223. Crack initiation and propagation in ductile specimens with notches: experimental and numerical study

    Article • Acta Mechanica, July 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  224. Damage mechanisms of random fibrous networks

    Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  225. Ballistic damage in hybrid composite laminates

    Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

    Professor Vadim V Silberschmidt, Niranjan Naik

  226. Inelastic behaviour of bacterial cellulose hydrogel: In aqua cyclic tests

    Article • Polymer Testing, July 2015, Elsevier

    Professor Vadim V Silberschmidt

  227. Characterisation of mechanical behaviour and damage analysis of 2D woven composites under bending

    Article • Composites Part B Engineering, June 2015, Elsevier

    Professor Vadim V Silberschmidt

  228. Analysis of impact induced damage in composites for wind turbine blades

    Article • June 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  229. Copper coin-embedded printed circuit board for heat dissipation: manufacture, thermal simulation and reliability

    Article • Circuit World, May 2015, Emerald

    Dr Yuanming Chen, Professor Vadim V Silberschmidt

  230. Effects of surface-functionalized aluminum nitride on thermal, electrical, and mechanical behaviors of polyarylene ether nitrile-based composites

    Article • Polymer Composites, April 2015, Wiley

    Dr Yuanming Chen, Professor Vadim V Silberschmidt

  231. Multiphysics modeling approach for micro electro–thermo–mechanical actuator: Failure mechanisms coupled analysis

    Article • Microelectronics Reliability, April 2015, Elsevier

    Professor Vadim V Silberschmidt

  232. Nonwovens modelling: a review of finite-element strategies

    Article • Journal of the Textile Institute, March 2015, Taylor & Francis

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  233. Preparation, characterization and properties of polycaprolactone diol-functionalized multi-walled carbon nanotube/thermoplastic polyurethane composite

    Article • Composites Part A Applied Science and Manufacturing, March 2015, Elsevier

    Professor Vadim V Silberschmidt

  234. Repair of damage in aircraft composite sound-absorbing panels

    Article • Composite Structures, February 2015, Elsevier

    Professor Vadim V Silberschmidt

  235. Properties and application of polyimide-based composites by blending surface functionalized boron nitride nanoplates

    Article • Journal of Applied Polymer Science, January 2015, Wiley

    Dr Yuanming Chen, Professor Vadim V Silberschmidt

  236. Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy

    Article • Composites Part B Engineering, January 2015, Elsevier

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  237. Finite element analysis of hypervelocity impact behaviour of CFRP-Al/HC sandwich panel

    Article • EPJ Web of Conferences, January 2015, EDP Sciences

    Professor Vadim V Silberschmidt

  238. Effect of micromorphology of cortical bone tissue on crack propagation under dynamic loading

    Article • EPJ Web of Conferences, January 2015, EDP Sciences

    Professor Vadim V Silberschmidt

  239. Modelling of Vibration Assisted Machining f.c.c Single Crystal

    Article • Procedia CIRP, January 2015, Elsevier

    Professor Vadim V Silberschmidt

  240. Characterization and application of aggregated porous copper oxide flakes for cupric source of copper electrodeposition

    Article • Materials Letters, January 2015, Elsevier

    Professor Vadim V Silberschmidt

  241. Bulk Metallic Glasses: Mechanical Properties and Performance

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  242. Constitutive Properties of Pure Indium in Wide Temperature Range

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  243. Crystalline Deformation in the Small Scale

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  244. Deformation and Damage of Thermally Bonded Nonwoven Networks

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  245. Dynamic fractures of adhesively bonded carbon fibre-reinforced polymeric joints

    Article • January 2015, Elsevier

    Professor Vadim V Silberschmidt

  246. Finite Element Modelling of 2D Brittle Fracture: The Phase-Field Approach

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  247. Fracture of Cortical Bone Tissue

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  248. Mechanics of Advanced Materials

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  249. Metamaterials with Negative Poisson’s Ratio: A Review of Mechanical Properties and Deformation Mechanisms

    Article • January 2015, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  250. Nonlinear Vibro-acoustic Interactions for Crack Detection in Beams

    Article • January 2015, DEStech Publications

    Professor Vadim V Silberschmidt

  251. Assessment of structural integrity of subsea wellhead system: analytical and numerical study

    Article • Frattura ed Integrità Strutturale, December 2014, Gruppo Italiano Frattura

    Professor Vadim V Silberschmidt

  252. Indentation-induced deformation localisation in Zr–Cu-based metallic glass

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Professor Vadim V Silberschmidt

  253. Numerical analysis of the interactive damage mechanisms in two-dimensional carbon fabric-reinforced thermoplastic composites under low velocity impacts

    Article • Journal of Composite Materials, November 2014, SAGE Publications

    Professor Vadim V Silberschmidt

  254. Numerical modelling of micro-machining of f.c.c. single crystal: Influence of strain gradients

    Article • Computational Materials Science, November 2014, Elsevier

    Professor Vadim V Silberschmidt

  255. Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

    Article • Computational Materials Science, November 2014, Elsevier

    Professor Vadim V Silberschmidt

  256. Effect of ultrasonically-assisted drilling on carbon-fibre-reinforced plastics

    Article • Journal of Sound and Vibration, November 2014, Elsevier

    Professor Vadim V Silberschmidt

  257. Influence of strain gradients on lattice rotation in nano-indentation experiments: A numerical study

    Article • Materials Science and Engineering A, July 2014, Elsevier

    Professor Vadim V Silberschmidt

  258. Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials

    Article • Journal of Applied Physics, June 2014, American Institute of Physics

    Professor Vadim V Silberschmidt

  259. Optimising curvature of carbon fibre-reinforced polymer composite panel for improved blast resistance: Finite-element analysis

    Article • Materials & Design (1980-2015), May 2014, Elsevier

    Professor Vadim V Silberschmidt

  260. Numerical analysis of progressive damage in nonwoven fibrous networks under tension

    Article • International Journal of Solids and Structures, May 2014, Elsevier

    Professor Vadim V Silberschmidt

  261. DAMAGE IN FIBRE-REINFORCED LAMINATES UNDER DYNAMIC LOADING

    Article • May 2014, Editora Edgard Blucher, Ltda.

    Professor Vadim V Silberschmidt

  262. Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning

    Article • Journal of Materials Processing Technology, April 2014, Elsevier

    Professor Vadim V Silberschmidt

  263. Analysis of temperature in conventional and ultrasonically-assisted drilling of cortical bone with infrared thermography

    Article • Technology and Health Care, April 2014, IOS Press

    Professor Vadim V Silberschmidt

  264. Comparative study of conventional and ultrasonically-assisted bone drilling

    Article • Technology and Health Care, April 2014, IOS Press

    Professor Vadim V Silberschmidt

  265. Penetration of cutting tool into cortical bone: Experimental and numerical investigation of anisotropic mechanical behaviour

    Article • Journal of Biomechanics, March 2014, Elsevier

    Professor Vadim V Silberschmidt

  266. Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: Effects of materials properties and geometry features of inclusions

    Article • Composites Part B Engineering, March 2014, Elsevier

    Professor Vadim V Silberschmidt

  267. Flexural Properties of Polyamides: Influence of Strain Rate, Friction and Moulding-Induced Anisotropy

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Professor Vadim V Silberschmidt

  268. Ti Alloy with Enhanced Machinability in UAT Turning

    Article • Metallurgical and Materials Transactions A, February 2014, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  269. Large deformation of thermally bonded random fibrous networks: microstructural changes and damage

    Article • Journal of Materials Science, February 2014, Springer Science + Business Media

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  270. Modelling of nonlinear crack–wave interactions for damage detection based on ultrasound—A review

    Article • Journal of Sound and Vibration, February 2014, Elsevier

    Professor Vadim V Silberschmidt

  271. Hybrid equilibrium finite element formulation for composite beams with partial interaction

    Article • Composite Structures, February 2014, Elsevier

    Professor Vadim V Silberschmidt

  272. Evolution and interaction of damage modes in fabric-reinforced composites under dynamic flexural loading

    Article • Composites Science and Technology, February 2014, Elsevier

    Professor Vadim V Silberschmidt

  273. Thermally enhanced ultrasonically assisted machining of Ti alloy

    Article • CIRP Journal of Manufacturing Science and Technology, January 2014, Elsevier

    Professor Vadim V Silberschmidt

  274. Surface-roughness Improvement in Ultrasonically Assisted Turning

    Article • Procedia CIRP, January 2014, Elsevier

    Professor Vadim V Silberschmidt

  275. Damage analysis of carbon fabric-reinforced composites under dynamic bending

    Article • January 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  276. Boron Carbide-Based Nanostructured Composite by Spark Plasma Sintering

    Article • January 2014, Research Publishing Services

    Professor Vadim V Silberschmidt

  277. Fracture process in cortical bone: X-FEM analysis of microstructured models

    Article • January 2014, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  278. Modelling fracture processes in bones

    Article • January 2014, Elsevier

    Professor Vadim V Silberschmidt

  279. Ultrasonically Assisted Machining of Titanium Alloys

    Article • January 2014, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  280. Bio-inspired structured boron carbide-boron nitride composite by reactive spark plasma sintering

    Article • Virtual and Physical Prototyping, December 2013, Taylor & Francis

    Professor Vadim V Silberschmidt

  281. Indentation studies in b.c.c. crystals with enhanced model of strain-gradient crystal plasticity

    Article • Computational Materials Science, November 2013, Elsevier

    Professor Vadim V Silberschmidt

  282. Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load

    Article • Computational Materials Science, November 2013, Elsevier

    Professor Vadim V Silberschmidt

  283. Three-Dimensional Analysis of the Effect of Material Randomness on the Damage Behaviour of CFRP Laminates with Stochastic Cohesive-Zone Elements

    Article • Applied Composite Materials, October 2013, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  284. Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Article • Journal of Materials Science, October 2013, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  285. FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal

    Article • Computational Materials Science, October 2013, Elsevier

    Professor Vadim V Silberschmidt

  286. Analysis of rate-dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens

    Article • Journal of the Textile Institute, September 2013, Taylor & Francis

    Professor Vadim V Silberschmidt

  287. Thermo-Mechanical Investigation of Ultra-High Molecular Weight Polyethylene for High Strain-Rate Applications

    Article • Key Engineering Materials, September 2013, Trans Tech Publications

    Professor Vadim V Silberschmidt

  288. Enhanced ultrasonically assisted turning of a β-titanium alloy

    Article • Ultrasonics, September 2013, Elsevier

    Professor Vadim V Silberschmidt

  289. Analysis of fracture processes in cortical bone tissue

    Article • Engineering Fracture Mechanics, September 2013, Elsevier

    Professor Vadim V Silberschmidt

  290. A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Article • Journal of Materials Science, August 2013, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  291. Vibration-assisted machining of single crystal

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  292. Ultrasonically assisted drilling: A finite-element model incorporating acoustic softening effects

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  293. Study of ultrasonically assisted turning of stainless steel and brass alloys

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  294. Quasi-static and dynamic deformation behaviour of Zr-based bulk metallic glass

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  295. Numerical study of strain-rate effect in cold rolls forming of steel

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  296. Numerical analysis of dynamic out-of-plane loading of nonwovens

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  297. Modelling the dynamic behaviour of hard-to-cut alloys under conditions of vibro-impact cutting

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  298. Mechanical and thermal characterisation of poly (l-lactide) composites reinforced with hemp fibres

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  299. Effect of random microstructure on crack propagation in cortical bone tissue under dynamic loading

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  300. Effect of crack induced nonlinearity on dynamics of structures: application to structural health monitoring

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  301. International Symposium on Dynamic Deformation and Fracture of Advanced Materials (D2FAM 2013)

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  302. Damage and fracture in fabric-reinforced composites under quasi-static and dynamic bending

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  303. Component based modelling of piezoelectric ultrasonic actuators for machining applications

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt, Dr Mohammad Salah

  304. Blast response of curved carbon/epoxy composite panels: Experimental study and finite-element analysis

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  305. Ballistic impact behaviour of woven fabric composite: Finite element analysis and experiments

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  306. Diagnostic tool for structural health monitoring: effect of material nonlinearity and vibro-impact process

    Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  307. Ultrasonically Assisted Drilling: Machining towards Improved Structural Integrity in Carbon/Epoxy Composites

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Vadim V Silberschmidt

  308. Significantly retarded interfacial reaction between an electroless Ni–W–P metallization and lead-free Sn–3.5Ag solder

    Article • Journal of Alloys and Compounds, July 2013, Elsevier

    Professor Vadim V Silberschmidt

  309. Effect of Plate Curvature on Blast Response of Carbon/Epoxy Composite

    Article • Key Engineering Materials, July 2013, Trans Tech Publications

    Professor Vadim V Silberschmidt

  310. Damage and fracture in carbon fabric reinforced composites under impact bending

    Article • Composite Structures, July 2013, Elsevier

    Professor Vadim V Silberschmidt

  311. Variability and anisotropy of mechanical behavior of cortical bone in tension and compression

    Article • Journal of the Mechanical Behavior of Biomedical Materials, May 2013, Elsevier

    Professor Vadim V Silberschmidt

  312. Corrigendum to ‘Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates’ [Polymer Testing 32/2 (2013) 413–425]

    Article • Polymer Testing, May 2013, Elsevier

    Professor Vadim V Silberschmidt

  313. Analysis of forces in conventional and ultrasonically assisted plane cutting of cortical bone

    Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, April 2013, SAGE Publications

    Professor Vadim V Silberschmidt

  314. Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens

    Article • Computational Materials Science, April 2013, Elsevier

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  315. Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates

    Article • Polymer Testing, April 2013, Elsevier

    Professor Vadim V Silberschmidt, Dr Liviu Marsavina

  316. Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation

    Article • Composites Part A Applied Science and Manufacturing, April 2013, Elsevier

    Professor Vadim V Silberschmidt

  317. Control of ultrasonic transducers for machining applications

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt, Dr Mohammad Salah

  318. Parametric code for generation of finite-element model of nonwovens accounting for orientation distribution of fibres

    Article • International Journal for Numerical Methods in Engineering, March 2013, Wiley

    Professor Vadim V Silberschmidt

  319. Fracture process in cortical bone: X-FEM analysis of microstructured models

    Article • International Journal of Fracture, February 2013, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  320. An advanced numerical tool to study fatigue crack propagation in aluminium plates repaired with a composite patch

    Article • Engineering Fracture Mechanics, February 2013, Elsevier

    Professor Vadim V Silberschmidt

  321. Article • Journal of Medical and Biological Engineering, January 2013, Taiwanese Society of Biomedical Engineering

    Professor Vadim V Silberschmidt

  322. Modeling of Micro-machining Single-crystal f.c.c. Metals

    Article • Procedia CIRP, January 2013, Elsevier

    Professor Vadim V Silberschmidt

  323. Finite Element Modelling of Conventional and Hybrid Oblique Turning Processes of Titanium Alloy

    Article • Procedia CIRP, January 2013, Elsevier

    Professor Vadim V Silberschmidt

  324. A Finite Element Model of Ultrasonically Assisted Drilling in Carbon/Epoxy Composites

    Article • Procedia CIRP, January 2013, Elsevier

    Professor Vadim V Silberschmidt

  325. Mechanics of Materials for Microelectronic Components and Packages

    Article • January 2013, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  326. Plastic behaviour of microstructural constituents of cortical bone tissue: a nanoindentation study

    Article • International Journal of Experimental and Computational Biomechanics, January 2013, Inderscience Publishers

    Professor Vadim V Silberschmidt

  327. Meso-scale deformation and damage in thermally bonded nonwovens

    Article • Journal of Materials Science, November 2012, Springer Science + Business Media

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  328. Numerical modelling of damage initiation in low-density thermally bonded nonwovens

    Article • Computational Materials Science, November 2012, Elsevier

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  329. Response of semi-crystalline thermoplastic polymers to dynamic loading: A finite element study

    Article • Computational Materials Science, November 2012, Elsevier

    Professor Vadim V Silberschmidt, Dr Liviu Marsavina

  330. Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness

    Article • Computational Materials Science, November 2012, Elsevier

    Professor Vadim V Silberschmidt

  331. Damage modelling in woven-fabric CFRP laminates under large-deflection bending

    Article • Computational Materials Science, November 2012, Elsevier

    Professor Vadim V Silberschmidt

  332. A risk based approach to asset integrity management

    Article • Journal of Quality in Maintenance Engineering, October 2012, Emerald

    Professor Vadim V Silberschmidt

  333. A novel concept to develop composite structures with isotropic negative Poisson’s ratio: Effects of random inclusions

    Article • Composites Science and Technology, October 2012, Elsevier

    Professor Vadim V Silberschmidt

  334. Advanced Fire Design of Timber Structures Using Computational Techniques - Simple Indeterminate Structures

    Article • Journal of Structural Fire Engineering, September 2012, Multi-Science Publishing Co. Ltd.

    Professor Vadim V Silberschmidt

  335. Strength of fibres in low-density thermally bonded nonwovens: An experimental investigation

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

  336. Variability and Anisotropy of Fracture Toughness of Cortical Bone Tissue

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  337. Ultrasonically assisted turning of Ti-6Al-2Sn-4Zr-6Mo

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  338. Numerical analysis and noise detection for design optimisation of an ultrasonic transducer

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  339. Finite element analysis of the high strain rate testing of polymeric materials

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  340. Finite element analysis of drilling in carbon fiber reinforced polymer composites

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  341. Damage in woven CFRP laminates subjected to low velocity impacts

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  342. Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  343. Application of Smooth-Particle Hydrodynamics in Metal Machining

    Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  344. Thermo-mechanical characteristics of indium micro-joint under various low-temperature excursions

    Article • August 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  345. Thermo-mechanical behaviour analysis of micro-solder joints by finite element modelling

    Article • August 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  346. Thermal fatigue life estimation and delamination mechanics studies of multilayered MEMS structures

    Article • Microelectronics Reliability, August 2012, Elsevier

    Professor Vadim V Silberschmidt

  347. On-line analysis of cracking in cortical bone under wedge penetration

    Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, July 2012, SAGE Publications

    Professor Vadim V Silberschmidt

  348. Crack as modulator, detector and amplifier in structural health monitoring

    Article • Journal of Sound and Vibration, July 2012, Elsevier

    Professor Vadim V Silberschmidt

  349. Viscoelastic Properties of Semi-Crystalline Thermoplastic Polymers: Dynamic Analysis and Creep

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  350. Ultrasonically Assisted Drilling of Carbon Fibre Reinforced Plastics

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  351. Turning of Advanced Alloys with Vibrating Cutting Tool

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  352. Numerical Modelling of Thermally Bonded Nonwovens: Continuous and Discontinuous Approaches

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  353. Indentation in F.C.C. Single Crystals

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  354. Finite-Element Analysis of Forces in Drilling of Ti-Alloys at Elevated Temperature

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  355. Experimental and numerical analysis of Izod impact test of cortical bone tissue

    Article • The European Physical Journal Special Topics, May 2012, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  356. Drilling-Induced Damage in CFRP Laminates: Experimental and Numerical Analysis

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  357. Analysis of Machinability of Ti- and Ni-Based Alloys

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  358. Analysis of Deformation Characteristics of Cortical Bone Tissue

    Article • Solid State Phenomena, May 2012, Trans Tech Publications

    Professor Vadim V Silberschmidt

  359. Preface

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  360. Numerical analysis of thermo-mechanical behavior of indium micro-joint at cryogenic temperatures

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  361. Modelling the effect of microstructural randomness on the mechanical response of composite laminates through the application of stochastic cohesive zone elements

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  362. Micro-scale modelling of bovine cortical bone fracture: Analysis of crack propagation and microstructure using X-FEM

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  363. Finite-element modelling of bending of CFRP laminates: Multiple delaminations

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  364. Computation of mechanical anisotropy in thermally bonded bicomponent fibre nonwovens

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  365. A parametric finite element analysis method for low-density thermally bonded nonwovens

    Article • Computational Materials Science, February 2012, Elsevier

    Professor Vadim V Silberschmidt

  366. Behaviour of semi-crystalline thermoplastic polymers: Experimental studies and simulations

    Article • Computational Materials Science, February 2012, Elsevier

    Dr Liviu Marsavina, Professor Vadim V Silberschmidt

  367. A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation

    Article • Journal of Materials Science, January 2012, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  368. Experimental and Numerical Analysis of Damage in Woven GFRP Composites Under Large-deflection Bending

    Article • Applied Composite Materials, January 2012, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  369. Vibro-impact response of the cracked structures to monitor structural health

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Vadim V Silberschmidt

  370. Numerical Modelling of Vibration-Assisted Turning of Ti-15333

    Article • Procedia CIRP, January 2012, Elsevier

    Professor Vadim V Silberschmidt

  371. Hot Ultrasonically Assisted Turning of β-Ti Alloy

    Article • Procedia CIRP, January 2012, Elsevier

    Professor Vadim V Silberschmidt

  372. Experimental and Numerical Investigations in Conventional and Ultrasonically Assisted Drilling of CFRP Laminate

    Article • Procedia CIRP, January 2012, Elsevier

    Professor Vadim V Silberschmidt

  373. Experimental and numerical analysis of stress wave propagation in polymers and the role of interfaces in armour systems

    Article • Open Engineering, January 2012, De Gruyter

    Professor Vadim V Silberschmidt

  374. Damage in woven CFRP laminates under impact loading

    Article • EPJ Web of Conferences, January 2012, EDP Sciences

    Professor Vadim V Silberschmidt

  375. Comparing Machinability of Ti-15-3-3-3 and Ni-625 Alloys in Uat

    Article • Procedia CIRP, January 2012, Elsevier

    Professor Vadim V Silberschmidt

  376. Experimental Investigation of the Mechanics of Conventional and Ultrasonically-Assisted Drilling of Cortical Bone

    Article • January 2012, ACTA Press

    Professor Vadim V Silberschmidt

  377. Thermal Fatigue Life Estimation and Fracture Mechanics Studies of Multilayered MEMS Structures Using a Sub-Domain Approach

    Article • World Journal of Mechanics, January 2012, Scientific Research Publishing, Inc,

    Professor Vadim V Silberschmidt

  378. Intermetallic phase transformations in Au–Al wire bonds

    Article • Intermetallics, December 2011, Elsevier

    Professor Vadim V Silberschmidt

  379. Full-scale natural fire tests on gypsum lined structural insulated panel (SIP) and engineered floor joist assemblies

    Article • Fire Safety Journal, November 2011, Elsevier

    Professor Vadim V Silberschmidt

  380. New mechanisms of void growth in Au–Al wire bonds: Volumetric shrinkage and intermetallic oxidation

    Article • Scripta Materialia, October 2011, Elsevier

    Professor Vadim V Silberschmidt

  381. Facilitating intermetallic formation in wire bonding by applying a pre-ultrasonic energy

    Article • Microelectronic Engineering, October 2011, Elsevier

    Professor Vadim V Silberschmidt

  382. On the modelling of dynamic structures with discontinuities

    Article • Nonlinear Dynamics, September 2011, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  383. Dynamic Behavior of Advanced Ti Alloy under Impact Loading: Experimental and Numerical Analysis

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  384. Behavior of aluminum oxide, intermetallics and voids in Cu–Al wire bonds

    Article • Acta Materialia, August 2011, Elsevier

    Professor Vadim V Silberschmidt

  385. Analysis of the High Strain-Rate Behaviour of Polyethylene Based Nanocomposites

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  386. Analysis of Nonlinear Shear Deformations in CFRP and GFRP Textile Laminates

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  387. Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  388. Analysis of Creep Behavior of Polypropylene Fibers

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  389. Dynamic Properties of Cortical Bone Tissue: Impact Tests and Numerical Study

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  390. Dynamic Response of Thermally Bonded Bicomponent Fibre Nonwovens

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  391. 9th International Conference on Damage Assessment of Structures (DAMAS 2011)

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  392. Effect of fire-induced damage on the uniaxial strength characteristics of solid timber: A numerical study

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  393. Damage assessment in multilayered MEMS structures under thermal fatigue

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  394. Damage assessment in CFRP laminates exposed to impact fatigue loading

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  395. Analysis of nonlinear deformations and damage in CFRP textile laminates

    Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  396. Analysis of anisotropic viscoelastoplastic properties of cortical bone tissues

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2011, Elsevier

    Professor Vadim V Silberschmidt

  397. A numerical study of gypsum plasterboard behaviour under standard and natural fire conditions

    Article • Fire and Materials, May 2011, Wiley

    Professor Vadim V Silberschmidt

  398. Void growth in thermosonic copper/gold wire bonding on aluminum pads

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  399. Editorial

    Article • Journal of Sound and Vibration, May 2011, Elsevier

    Professor Vadim V Silberschmidt

  400. An effective thermal property framework for softwood in parametric design fires: Comparison of the Eurocode 5 parametric charring approach and advanced calculation models

    Article • Construction and Building Materials, May 2011, Elsevier

    Professor Vadim V Silberschmidt

  401. Finite-Element Simulations of Split Hopkinson Test of Ti-Based Alloy

    Article • Advanced Materials Research, April 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  402. Effect of Cutting Conditions on Temperature Generated in Drilling Process: a FEA Approach

    Article • Advanced Materials Research, April 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  403. Computational Study of Ultrasonically-Assisted Turning of Ti Alloys

    Article • Advanced Materials Research, April 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  404. Analysis of Forces and Temperatures in Conventional and Ultrasonically-Assisted Cutting of Bone

    Article • Advanced Materials Research, April 2011, Trans Tech Publications

    Professor Vadim V Silberschmidt

  405. Effect of ultrasonic energy on nanoscale interfacial structure in copper wire bonding on aluminium pads

    Article • Journal of Physics D Applied Physics, March 2011, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  406. Experimental investigations of forces and torque in conventional and ultrasonically-assisted drilling of cortical bone

    Article • Medical Engineering & Physics, March 2011, Elsevier

    Professor Vadim V Silberschmidt

  407. Finite element simulation of low-density thermally bonded nonwoven materials: Effects of orientation distribution function and arrangement of bond points

    Article • Computational Materials Science, February 2011, Elsevier

    Professor Vadim V Silberschmidt

  408. Finite element modelling of thermally bonded bicomponent fibre nonwovens: Tensile behaviour

    Article • Computational Materials Science, February 2011, Elsevier

    Professor Vadim V Silberschmidt

  409. Experimental Investigation of the Mechanics of Conventional and Ultrasonically-Assisted Drilling of Cortical Bone

    Article • January 2011, ACTA Press

    Professor Vadim V Silberschmidt

  410. Effect of bonding duration and substrate temperature in copper ball bonding on aluminium pads: A TEM study of interfacial evolution

    Article • Microelectronics Reliability, January 2011, Elsevier

    Professor Vadim V Silberschmidt

  411. Crack Propagation in a Toughened Epoxy Adhesive under Repeated Impacts

    Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

    Professor Vadim V Silberschmidt

  412. Energy-Based Analysis of Ultrasonically Assisted Turning

    Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

    Professor Vadim V Silberschmidt

  413. Vibro-Impact Response of a Cracked Bar

    Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

    Professor Vadim V Silberschmidt

  414. A micromechanism study of thermosonic gold wire bonding on aluminum pad

    Article • Journal of Applied Physics, December 2010, American Institute of Physics

    Professor Vadim V Silberschmidt

  415. Fatigue Crack Growth in Adhesively Bonded Joints with Intermittent Impacts

    Article • Key Engineering Materials, November 2010, Trans Tech Publications

    Professor Vadim V Silberschmidt

  416. Ti particle-reinforced surface layers in Al: Effect of particle size on microstructure, hardness and wear

    Article • Materials Characterization, November 2010, Elsevier

    Professor Vadim V Silberschmidt

  417. Interaction of Matrix Cracking and Delamination in Cross-ply Laminates: Simulations with Stochastic Cohesive Zone Elements

    Article • Applied Composite Materials, August 2010, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  418. Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure

    Article • Journal of Materials Science, August 2010, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  419. Introduction to Micromechanics and Nanomechanics

    Article • Assembly Automation, August 2010, Emerald

    Professor Vadim V Silberschmidt

  420. A Model to Predict the Anomalous Fatigue Crack Growth Behaviour Seen in Mixed Mechanism Fracture

    Article • The Journal of Adhesion, June 2010, Taylor & Francis

    Professor Vadim V Silberschmidt

  421. Repetitive indentation of Ti-based alloys: A numerical study

    Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  422. Interfacial failure under thermal fatigue loading in multilayered MEMS structures

    Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  423. Initial bond formation in thermosonic gold ball bonding on aluminium metallization pads

    Article • Journal of Materials Processing Technology, June 2010, Elsevier

    Professor Vadim V Silberschmidt

  424. Large scale natural fire tests on protected engineered timber floor systems

    Article • Fire Safety Journal, April 2010, Elsevier

    Professor Vadim V Silberschmidt

  425. Formation of Ag3Sn plates in SnAgCu solder bumps

    Article • Materials Science and Engineering A, April 2010, Elsevier

    Professor Vadim V Silberschmidt

  426. Energy aspects of ultrasonic intensification of treatment of metals

    Article • Doklady Physics, April 2010, Pleiades Publishing Ltd

    Professor Vadim V Silberschmidt

  427. The role of bonding duration in wire bond formation: a study of footprints of thermosonic gold wire on aluminium pad

    Article • Microelectronics International, January 2010, Emerald

    Professor Vadim V Silberschmidt

  428. Micro-Scale Numerical Model of Bovine Cortical Bone: Analysis of Plasticity Localization

    Article • January 2010, ASME International

    Professor Vadim V Silberschmidt

  429. Effect of ultrasonic energy on interfacial structure and bond strength in copper wire bonding

    Article • January 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  430. Anisotropic Elastic-Plastic Mechanical Properties of Thermally Bonded Bicomponent Fibre Nonwovens

    Article • January 2010, ASME International

    Professor Vadim V Silberschmidt

  431. A 3D Numerical Study to Investigate the Effects of Temperature Variation and Residual Stresses in Representative Volume MEMS Elements

    Article • January 2010, ASME International

    Professor Vadim V Silberschmidt

  432. Computational and Experimental Mechanics of Advanced Materials

    Article • January 2010, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  433. Effect of Microstructure: Multi-scale Modelling

    Article • January 2010, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  434. Experimental Analysis of Mechanical Behaviour of Advanced Materials

    Article • January 2010, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  435. Thermal analysis of orthogonal cutting of cortical bone using finite element simulations

    Article • International Journal of Experimental and Computational Biomechanics, January 2010, Inderscience Publishers

    Professor Vadim V Silberschmidt

  436. TEM interfacial characteristics of thermosonic gold wire bonding on aluminium metallization

    Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  437. Intermetallics formation and evolution in pure indium joint for cryogenic application

    Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  438. Amorphous metallic thin films as copper diffusion barrier for advanced interconnect applications

    Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  439. Vibration characteristics of MR cantilever sandwich beams: experimental study

    Article • Smart Materials and Structures, November 2009, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  440. Modelling the Effect of Microstructural Randomness on the Fracture of Composite Laminates with Stochastic Cohesive Zone Elements

    Article • Key Engineering Materials, October 2009, Trans Tech Publications

    Professor Vadim V Silberschmidt

  441. Formation of Sn dendrites and SnAg eutectics in a SnAgCu solder

    Article • Scripta Materialia, October 2009, Elsevier

    Professor Vadim V Silberschmidt

  442. Growth of Intermetallic Compounds in Thermosonic Copper Wire Bonding on Aluminum Metallization

    Article • Journal of Electronic Materials, September 2009, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  443. Simulations of delamination in CFRP laminates: Effect of microstructural randomness

    Article • Computational Materials Science, September 2009, Elsevier

    Professor Vadim V Silberschmidt

  444. Finite element analysis of forces of plane cutting of cortical bone

    Article • Computational Materials Science, September 2009, Elsevier

    Professor Vadim V Silberschmidt

  445. 2D finite element analysis of thermally bonded nonwoven materials: Continuous and discontinuous models

    Article • Computational Materials Science, September 2009, Elsevier

    Professor Vadim V Silberschmidt

  446. Stresses in ultrasonically assisted bone cutting

    Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  447. Numerical analysis of response of indium micro-joint to low-temperature cycling

    Article • August 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  448. Minimization of fracture-pulse energy under contact interaction

    Article • Doklady Physics, July 2009, Pleiades Publishing Ltd

    Professor Vadim V Silberschmidt

  449. A re-examination of the mechanism of thermosonic copper ball bonding on aluminium metallization pads

    Article • Scripta Materialia, July 2009, Elsevier

    Professor Vadim V Silberschmidt

  450. Measurements of Surface Roughness in Conventional and Ultrasonically Assisted Bone Drilling

    Article • American Journal of Biomedical Sciences, July 2009, New World Publishing International, Inc.

    Professor Vadim V Silberschmidt

  451. Heterogeneous Intragranular Inelastic Behavior of a Sn-Ag-Cu Alloy

    Article • Journal of Electronic Materials, June 2009, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  452. Development of Delamination in Cross-Ply Laminates: Effect of Microstructure

    Article • Key Engineering Materials, June 2009, Trans Tech Publications

    Professor Vadim V Silberschmidt

  453. Damage Assessment of a Cracked Bar: Effect of Material Nonlinearity on Vibro-Impact Response

    Article • Key Engineering Materials, June 2009, Trans Tech Publications

    Professor Vadim V Silberschmidt

  454. Mechanical response of indium micro-joints to low temperature cycling

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  455. Creep damage study at powercycling of lead-free surface mount device

    Article • Computational Materials Science, May 2009, Elsevier

    Professor Vadim V Silberschmidt

  456. Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate

    Article • Scripta Materialia, March 2009, Elsevier

    Professor Vadim V Silberschmidt

  457. Temperature Calculations in Orthogonal Cutting of Cortical Bone Using Finite Element Analysis

    Article • January 2009, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  458. Enhanced finite element model of ultrasonically assisted turning

    Article • International Journal of Machining and Machinability of Materials, January 2009, Inderscience Publishers

    Professor Vadim V Silberschmidt

  459. Analysis of Damage Propagation in Single Lap Joints in Impact Fatigue

    Article • January 2009, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  460. Impact Fatigue of Adhesive Joints

    Article • Key Engineering Materials, January 2009, Trans Tech Publications

    Professor Vadim V Silberschmidt

  461. TEM Microstructural Analysis of As-bonded Copper Ball Bonds on Aluminum Metallization

    Article • December 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  462. Impact fatigue in adhesive joints

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2008, SAGE Publications

    Professor Vadim V Silberschmidt

  463. Damage in adhesively bonded CFRP joints: Sinusoidal and impact-fatigue

    Article • Composites Science and Technology, October 2008, Elsevier

    Professor Vadim V Silberschmidt

  464. 3D Study of Thermal Stresses in Lead-Free Surface Mount Devices

    Article • Journal of Thermal Stresses, September 2008, Taylor & Francis

    Professor Vadim V Silberschmidt

  465. Thermo-mechanical damage accumulation during power cycling of lead-free surface mount solder joints

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  466. Evolution of CuSn intermetallics between molten SnAgCu solder and Cu substrate

    Article • Acta Materialia, September 2008, Elsevier

    Professor Vadim V Silberschmidt

  467. Effect of thermal aging on interfacial behaviour of copper ball bonds

    Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  468. Delamination in adhesively bonded CFRP joints: Standard fatigue, impact-fatigue and intermittent impact

    Article • Composites Science and Technology, September 2008, Elsevier

    Professor Vadim V Silberschmidt

  469. Effect of multi-impacts on a PMMA sheet material

    Article • Journal of Materials Processing Technology, August 2008, Elsevier

    Professor Vadim V Silberschmidt

  470. Mixed-mode crack growth in bonded composite joints under standard and impact-fatigue loading

    Article • Journal of Materials Science, July 2008, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  471. Numerical modelling of low-density cellular materials

    Article • Computational Materials Science, July 2008, Elsevier

    Professor Vadim V Silberschmidt

  472. Mesomechanical modelling of SnAgCu solder joints in flip chip

    Article • Computational Materials Science, July 2008, Elsevier

    Professor Vadim V Silberschmidt

  473. Finite element analysis of lead-free surface mount devices

    Article • Computational Materials Science, July 2008, Elsevier

    Professor Vadim V Silberschmidt

  474. Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel

    Article • Surface and Coatings Technology, June 2008, Elsevier

    Professor Vadim V Silberschmidt

  475. Effects of process parameters on bondability in thermosonic copper ball bonding

    Article • May 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  476. Viscoelasticity of multi-layer textile reinforced polymer composites used in soccer balls

    Article • Journal of Materials Science, February 2008, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  477. A Risk Based Methodology for Spare Parts Inventory Optimisation

    Article • January 2008, ASME International

    Professor Vadim V Silberschmidt

  478. Article • Journal of Sound and Vibration, December 2007, Elsevier

    Professor Vadim V Silberschmidt

  479. Damage evolution in adhesive joints subjected to impact fatigue

    Article • Journal of Sound and Vibration, December 2007, Elsevier

    Professor Vadim V Silberschmidt

  480. Analysis of forces in ultrasonically assisted turning

    Article • Journal of Sound and Vibration, December 2007, Elsevier

    Professor Vadim V Silberschmidt

  481. Effect of Impact-Fatigue on Damage in Adhesive Joints

    Article • September 2007, CrossRef Test Account

    Professor Vadim V Silberschmidt

  482. Micromechanical modelling of SnAgCu solder joint under cyclic loading: Effect of grain orientation

    Article • Computational Materials Science, March 2007, Elsevier

    Professor Vadim V Silberschmidt

  483. 3D finite element analysis of ultrasonically assisted turning

    Article • Computational Materials Science, March 2007, Elsevier

    Professor Vadim V Silberschmidt

  484. Crystallographic Structure and Mechanical Behaviour of SnAgCu Solder Interconnects under a Constant Loading Rate

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  485. Creep Analysis of a Lead-free Surface Mount Device

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  486. Effect of Impact-Fatigue on Damage in Adhesive Joints

    Article • Key Engineering Materials, January 2007, Trans Tech Publications

    Professor Vadim V Silberschmidt

  487. Mechanical Behaviour of Grains in SnAgCu Solder Joints

    Article • December 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  488. Analysis of Stress Distribution in SnAgCu Solder Joint

    Article • October 2006, CrossRef Test Account

    Professor Vadim V Silberschmidt

  489. Stresses in Ultrasonically Assisted Turning

    Article • October 2006, CrossRef Test Account

    Professor Vadim V Silberschmidt

  490. Effect of micro-randomness on macroscopic properties and fracture of laminates

    Article • Journal of Materials Science, August 2006, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  491. Modelling of Ag3Sn coarsening and its effect on creep of Sn–Ag eutectics

    Article • Materials Science and Engineering A, July 2006, Elsevier

    Professor Vadim V Silberschmidt

  492. Effect of material’s randomness on scaling of crack propagation in ceramics

    Article • International Journal of Fracture, July 2006, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  493. Analysis of damage evolution in thick ceramic coatings

    Article • Materials Science and Engineering A, June 2006, Elsevier

    Professor Vadim V Silberschmidt

  494. Analysis of material response to ultrasonic vibration loading in turning Inconel 718

    Article • Materials Science and Engineering A, May 2006, Elsevier

    Professor Vadim V Silberschmidt

  495. Book Review: Jacques Lévy-Véhel, Evelyne Lutton (Eds.) Fractals in Engineering. New Trends in Theory and Applications

    Article • ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, April 2006, Wiley

    Professor Vadim V Silberschmidt

  496. Micromechanical analysis of effective properties of plasma sprayed alumina coatings

    Article • Materials Science and Engineering A, February 2006, Elsevier

    Professor Vadim V Silberschmidt

  497. Stresses in Ultrasonically Assisted Turning

    Article • Applied Mechanics and Materials, January 2006, Trans Tech Publications

    Professor Vadim V Silberschmidt

  498. Multi- scale modelling of cracking in cross- ply laminates

    Article • September 2005, Taylor & Francis

    Professor Vadim V Silberschmidt

  499. Semi-analytical analysis of thermally induced damage in thin ceramic coatings

    Article • International Journal of Solids and Structures, August 2005, Elsevier

    Professor Vadim V Silberschmidt

  500. Effect of lubrication and cutting parameters on ultrasonically assisted turning of Inconel 718

    Article • Journal of Materials Processing Technology, May 2005, Elsevier

    Professor Vadim V Silberschmidt

  501. Thermomechanical finite element simulations of ultrasonically assisted turning

    Article • Computational Materials Science, March 2005, Elsevier

    Professor Vadim V Silberschmidt

  502. Microstructure-based damage and fracture modelling of alumina coatings

    Article • Computational Materials Science, March 2005, Elsevier

    Professor Vadim V Silberschmidt

  503. Matrix cracking in cross-ply laminates: effect of randomness

    Article • Composites Part A Applied Science and Manufacturing, February 2005, Elsevier

    Professor Vadim V Silberschmidt

  504. 10.4028/0-87849-351-4.71

    Article • January 2005, CrossRef Test Account

    Professor Vadim V Silberschmidt

  505. Multi-scale modelling of cracking in cross-ply laminates

    Article • January 2005, Elsevier

    Professor Vadim V Silberschmidt

  506. Finite element analysis of ultrasonically assisted turning of Inconel 718

    Article • Journal of Materials Processing Technology, November 2004, Elsevier

    Professor Vadim V Silberschmidt

  507. Ultrasonically assisted turning of aviation materials: simulations and experimental study

    Article • Ultrasonics, April 2004, Elsevier

    Professor Vadim V Silberschmidt

  508. Finite element simulations of ultrasonically assisted turning

    Article • Computational Materials Science, November 2003, Elsevier

    Professor Vadim V Silberschmidt

  509. Thermal Loading of Duplex Steels

    Article • Journal of Engineering Materials and Technology, January 2003, ASME International

    Professor Vadim V Silberschmidt

  510. Crack propagation in random materials: computational analysis

    Article • Computational Materials Science, January 2003, Elsevier

    Professor Vadim V Silberschmidt

  511. Computational and Experimental Mechanics of Advanced Materials

    Article • Journal of Engineering Materials and Technology, January 2003, ASME International

    Professor Vadim V Silberschmidt

  512. Computational analysis of thermally loaded duplex stainless steels: the role of the free surfaces and the microstructure

    Article • Computational Materials Science, December 2000, Elsevier

    Professor Vadim V Silberschmidt

  513. Dynamics and Scaling Characteristics of Shear Crack Propagation

    Article • Pure and Applied Geophysics, April 2000, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  514. Enhanced fracture energy and effects of temperature at spalling in ceramics: continuum damage modelling

    Article • Archive of Applied Mechanics, February 2000, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  515. Analysis of Cracking in Rock Salt

    Article • Rock Mechanics and Rock Engineering, February 2000, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  516. Dynamics and Scaling Characteristics of Shear Crack Propagation

    Article • January 2000, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  517. Analysis of thermal residual stresses in duplex-type materials

    Article • Computational Materials Science, December 1999, Elsevier

    Professor Vadim V Silberschmidt

  518. On material immanent ratchetting of two-phase materials under cyclic purely thermal loading

    Article • Archive of Applied Mechanics, November 1999, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  519. Multifractal characteristics of matrix cracking in laminates under T-fatigue

    Article • Computational Materials Science, December 1998, Elsevier

    Professor Vadim V Silberschmidt

  520. Computational modelling of the size effect of damage inhomogeneity in ceramics

    Article • Computational Materials Science, December 1998, Elsevier

    Professor Vadim V Silberschmidt

  521. Evolution of a laser-generated shock wave in iron and its interaction with martensitic transformation and twinning

    Article • Shock Waves, June 1998, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  522. Analysis of Shear Damage Evolution

    Article • International Journal of Damage Mechanics, April 1998, SAGE Publications

    Professor Vadim V Silberschmidt

  523. Dynamics of Stochastic Damage Evolution

    Article • International Journal of Damage Mechanics, January 1998, SAGE Publications

    Professor Vadim V Silberschmidt

  524. Fractal and Multifractal Characteristics of Propagating Cracks

    Article • Journal de Physique IV (Proceedings), October 1996, EDP Sciences

    Professor Vadim V Silberschmidt

  525. Fractal approach in modelling of earthquakes

    Article • Geologische Rundschau, March 1996, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  526. Stochastic dynamics of damage evolution in brittle rocks

    Article • Geologische Rundschau, March 1996, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  527. Fractal approach in modelling of earthquakes

    Article • International Journal of Earth Sciences, January 1996, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  528. Stochastic dynamics of damage evolution in brittle rocks

    Article • International Journal of Earth Sciences, January 1996, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  529. SCALING AND MULTIFRACTAL CHARACTER OF MATRIX CRACKING IN CARBON FIBRE-REINFORCED CROSS-PLY LAMINATES

    Article • Mechanics of Composite Materials and Structures, September 1995, Taylor & Francis

    Professor Vadim V Silberschmidt

  530. The effect of material stochasticity on crack-damage interaction and crack propagation

    Article • Engineering Fracture Mechanics, June 1994, Elsevier

    Professor Vadim V Silberschmidt

  531. Effect of Stochasticity on the Damage Accumulation in Solids

    Article • International Journal of Damage Mechanics, January 1994, SAGE Publications

    Professor Vadim V Silberschmidt

  532. Fractal Characteristics of Joint Development in Stochastic Rocks

    Article • January 1994, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  533. Multi—Scale Model of Damage Evolution in Stochastic Rocks: Fractal Approach

    Article • January 1994, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  534. On the Multifractal Character of Load Distribution Near the Cracks

    Article • EPL (Europhysics Letters), September 1993, Institute of Physics Publishing

    Professor Vadim V Silberschmidt

  535. Effect of stochasticity on scaling properties of crack propagation

    Article • International Journal of Fracture, May 1993, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  536. The fractal characterization of propagating cracks

    Article • International Journal of Fracture, August 1992, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  537. On statistical thermodynamics of deformation twinning

    Article • Continuum Mechanics and Thermodynamics, January 1992, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  538. Kinetics and topological aspects of the quasibrittle failure of carbon-bearing composites

    Article • Mechanics of Composite Materials, January 1991, Springer Science + Business Media

    Professor Vadim V Silberschmidt

  539. Fractal models in rock fracture analysis

    Article • Terra Nova, September 1990, Wiley

    Professor Vadim V Silberschmidt

  540. The Fracture of Solids with Microcracks: Experiments, Statistical Thermodynamics and Constitutive Equations

    Article • January 1989, Elsevier

    Professor Vadim V Silberschmidt

  541. Account for Random Microstructure in Multiscale Models

    Article • Springer Science + Business Media

    Professor Vadim V Silberschmidt

  542. Grain Features of SnAgCu Solder and their Effect on Mechanical Behavior of Micro-Joints

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Professor Vadim V Silberschmidt

  543. Computational modeling of ultrasonically assisted turning

    Article • Springer Science + Business Media

    Professor Vadim V Silberschmidt