Contact

All Stories

  1. Nylon/Ag fiber sensor for real-time damage monitoring of composites subjected to dynamic loading

    Article • Smart Materials and Structures, October 2020, Institute of Physics Publishing

    Professor Mostapha TARFAOUI

  2. Graphene nanofillers as a player to improve the dynamic compressive response and failure behavior of carbon/epoxy composite

    Article • Nanotechnology, August 2020, Institute of Physics Publishing

    Professor Mostapha TARFAOUI

  3. 3D Printing to Support the Shortage in Personal Protective Equipment Caused by COVID-19 Pandemic

    Article • Materials, July 2020, MDPI AG

    Professor Mostapha TARFAOUI

  4. Effect of carbon nanotubes on the in-plane dynamic behavior of a carbon/epoxy composite under high strain rate compression using SHPB

    Article • Smart Materials and Structures, July 2020, Institute of Physics Publishing

    Professor Mostapha TARFAOUI

  5. Heat recovery from sulfuric acid plants for seawater desalination using RO and MED systems

    Article • Applied Water Science, March 2020, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  6. Effect of CNTs Additives on the Energy Balance of Carbon/Epoxy Nanocomposites during Dynamic Compression Test

    Article • Polymers, January 2020, MDPI AG

    Professor Mostapha TARFAOUI

  7. Mechanical properties of carbon black/poly (ε-caprolactone)-based tissue scaffolds

    Article • Arabian Journal of Chemistry, January 2020, Elsevier

    Professor Mostapha TARFAOUI

  8. Strain rate effects and the failure behaviour of polyester matrix

    Article • Composites Part B Engineering, October 2019, Elsevier

    Professor Mostapha TARFAOUI

  9. Finite Element Analysis of Composite Offshore Wind Turbine Blades Under Operating Conditions

    Article • Journal of Thermal Science and Engineering Applications, September 2019, ASME International

    Professor Mostapha TARFAOUI

  10. Hygrothermal ageing effects on High Strain Rate Behaviour of Adhesively Bonded Composite Joints

    Article • Composites Part B Engineering, September 2019, Elsevier

    Professor Mostapha TARFAOUI

  11. Development of microscale flexible Nylon/Ag strain sensor wire

    Article • Composites Science and Technology, September 2019, Elsevier

    Professor Mostapha TARFAOUI

  12. Strengthening of Damaged Metallic Structures: A New Numerical Model for Interfacial Stresses Analysis

    Article • Defect and Diffusion Forum, September 2019, Trans Tech Publications

    Professor Mostapha TARFAOUI

  13. Real-time strain monitoring and damage detection of composites in different directions of the applied load using a microscale flexible Nylon/Ag strain sensor

    Article • Structural Health Monitoring, August 2019, SAGE Publications

    Professor Mostapha TARFAOUI

  14. Real-time Strain Monitoring Performance of Flexible Nylon/Ag Conductive Fiber

    Article • Sensors and Actuators A Physical, August 2019, Elsevier

    Professor Mostapha TARFAOUI

  15. Additive manufacturing of polymer composites: processing and modeling approaches

    Article • Composites Part B Engineering, August 2019, Elsevier

    Professor Mostapha TARFAOUI

  16. Design and Hydrodynamic Performance of a Horizontal Axis Hydrokinetic Turbine

    Article • International Journal of Automotive and Mechanical Engineering, July 2019, Universiti Malaysia Pahang Publisher

    Professor Mostapha TARFAOUI

  17. Sandwich panels exposed to slamming impacts: Comparison between experimental and SPH results

    Article • Composite Structures, July 2019, Elsevier

    Professor Mostapha TARFAOUI

  18. Modelling of the temperature and residual stress fields during 3D printing of polymer composites

    Article • The International Journal of Advanced Manufacturing Technology, June 2019, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  19. Energy dissipation of stitched and unstitched woven composite materials

    Article • Composites Part B Engineering, June 2019, Elsevier

    Professor Mostapha TARFAOUI

  20. Structural analysis of offshore wind turbine blades using finite element method

    Article • Wind Engineering, May 2019, SAGE Publications

    Professor Mostapha TARFAOUI

  21. Carbon nanotubes as a player to improve mechanical shock wave absorption

    Article • Composites Part B Engineering, May 2019, Elsevier

    Professor Mostapha TARFAOUI

  22. Numerical study on the compressive behaviour of an aluminium honeycomb core

    Article • Materiali in tehnologije, April 2019, Institute of Metals and Technology

    Professor Mostapha TARFAOUI

  23. New design for reducing interfacial stresses of reinforced structures with FRP plates

    Article • International Journal of Building Pathology and Adaptation, April 2019, Emerald

    Professor Mostapha TARFAOUI

  24. New Optimized Numerical Solution of Interfacial Stresses in Strengthened Steel Structures with CFRP

    Article • Advances in Civil Engineering Materials, February 2019, ASTM International

    Professor Mostapha TARFAOUI

  25. Nanotechnology and Development of Strain Sensor for Damage Detection

    Article • February 2019, IntechOpen

    Professor Mostapha TARFAOUI

  26. Experimental Analysis of crushing of honeycomb cores under compression

    Article • Journal of Materials Engineering and Performance, January 2019, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  27. Design and optimization of composite offshore wind turbine blades

    Article • Journal of Energy Resources Technology, January 2019, ASME International

    Professor Mostapha TARFAOUI

  28. Numerical study of the structural static and fatigue strength of wind turbine blades

    Article • Materials Today Proceedings, January 2019, Elsevier

    Professor Mostapha TARFAOUI

  29. Improved numerical analysis of structures reinforced by composite FRP

    Article • Advanced Composites Letters, January 2019, SAGE Publications

    Professor Mostapha TARFAOUI

  30. In-situ heat dissipation monitoring in adhesively bonded composite joints under dynamic compression loading using SHPB

    Article • Composites Part B Engineering, December 2018, Elsevier

    Professor Mostapha TARFAOUI

  31. From Renewable to Marine Energies Sources for Sustainable Development and Energy Transition in Morocco: Current Status and Scenario

    Article • November 2018, MDPI AG

    Professor Mostapha TARFAOUI

  32. Staking lay-up effect on dynamic compression behaviour of E-Glass/epoxy composite materials: Experimental and numerical investigation

    Article • Advanced Materials Letters, November 2018, VBRI Press

    Professor Mostapha TARFAOUI

  33. Evaluation of durability of composite materials applied to renewable marine energy: Case of ducted tidal turbine

    Article • Energy Reports, November 2018, Elsevier

    Professor Mostapha TARFAOUI

  34. Mechanical properties of offshoring polymer composite pipes at various temperatures

    Article • Composites Part B Engineering, November 2018, Elsevier

    Professor Mostapha TARFAOUI

  35. Prediction of notched strength for cylindrical composites pipes under tensile loading conditions

    Article • Composites Part B Engineering, October 2018, Elsevier

    Professor Mostapha TARFAOUI

  36. Can a three-dimensional composite really provide better mechanical performance compared to two-dimensional composite under compressive loading?

    Article • Journal of Reinforced Plastics and Composites, September 2018, SAGE Publications

    Professor Mostapha TARFAOUI

  37. Self-heating and deicing epoxy/glass fibre-based carbon nanotubes buckypaper composite

    Article • Journal of Materials Science, September 2018, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  38. Dynamic behavior of top-hat bonded stiffened composite panels: Experimental characterization

    Article • Composites Part B Engineering, September 2018, Elsevier

    Professor Mostapha TARFAOUI

  39. Mechanical behaviour of carbon nanotubes-based polymer composites under impact tests

    Article • Journal of Composite Materials, August 2018, SAGE Publications

    Professor Mostapha TARFAOUI

  40. Mechanical behavior of composite structures subjected to constant slamming impact velocity: An experimental and numerical investigation

    Article • International Journal of Mechanical Sciences, August 2018, Elsevier

    Professor Mostapha TARFAOUI

  41. Experimental and numerical investigation of the fracture behavior of adhesive shear tests single lap joints

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, July 2018, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  42. Effect of Graphene Nano-Additives on the Local Mechanical Behavior of Derived Polymer Nanocomposites

    Article • Polymers, June 2018, MDPI AG

    Professor Mostapha TARFAOUI

  43. Thermomechanical behavior of adhesively bonded joints under out-of-plane dynamic compression loading at high strain rate

    Article • Journal of Composite Materials, May 2018, SAGE Publications

    Professor Mostapha TARFAOUI

  44. An investigation of in-plane dynamic behavior of adhesively-bonded composite joints

    Article • Composite Structures, May 2018, Elsevier

    Professor Mostapha TARFAOUI

  45. Assessment of Energy Production Potential from Tidal Stream Currents in Morocco

    Article • Energies, April 2018, MDPI AG

    Professor Mostapha TARFAOUI

  46. Inter laminar failure behavior in laminate carbon nanotubes-based polymer composites

    Article • Journal of Composite Materials, March 2018, SAGE Publications

    Professor Mostapha TARFAOUI

  47. Experimental study of the out-of-plane dynamic behaviour of adhesively bonded composite joints using split Hopkinson pressure bars

    Article • Journal of Composite Materials, February 2018, SAGE Publications

    Professor Mostapha TARFAOUI

  48. Damage detection versus heat dissipation under dynamic compression

    Article • Composite Structures, February 2018, Elsevier

    Professor Mostapha TARFAOUI

  49. Improved Stresses Analysis of a Functionally Graded Beam under Prestressed CFRP Plate

    Article • January 2018, SAGE Publications

    BRAIRI Samir , Professor Mostapha TARFAOUI

  50. An experimental investigation on dynamic response of composite panels subjected to hydroelastic impact loading at constant velocities

    Article • Engineering Structures, December 2017, Elsevier

    Professor Mostapha TARFAOUI

  51. investigation of sandwich composite panels under hydrodynamic slamming loads

    Article • Composite Structures, October 2017, Elsevier

    Professor Mostapha TARFAOUI

  52. Numerical Evaluation of Dynamic Response for Flexible Composite Structures under Slamming Impact for Naval Applications

    Article • Applied Composite Materials, October 2017, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  53. Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact

    Article • Composites Part B Engineering, September 2017, Elsevier

    Professor Mostapha TARFAOUI

  54. Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes

    Article • Applied Composite Materials, August 2017, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  55. Dynamic properties of hybrid composite structures based multiwalled carbon nanotubes

    Article • Composites Science and Technology, August 2017, Elsevier

    Professor Mostapha TARFAOUI

  56. Experimental Study and Numerical Modelling of Low Velocity Impact on Laminated Composite Reinforced with Thin Film Made of Carbon Nanotubes

    Article • Applied Composite Materials, July 2017, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  57. Simulation of Mechanical Behavior and Damage of a Large Composite Wind Turbine Blade under Critical Loads

    Article • Applied Composite Materials, July 2017, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  58. Damage prediction of horizontal axis marine current turbines under hydrodynamic, hydrostatic and impacts loads

    Article • Composite Structures, June 2017, Elsevier

    Professor Mostapha TARFAOUI

  59. Progressive damage modeling in laminate composites under slamming impact water

    Article • Composite Structures, May 2017, Elsevier

    Professor Mostapha TARFAOUI

  60. Mechanical characterization of carbon nanotubes based polymer composites using indentation tests

    Article • Composites Part B Engineering, April 2017, Elsevier

    Professor Mostapha TARFAOUI

  61. Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites

    Article • Composites Part B Engineering, March 2017, Elsevier

    Professor Mostapha TARFAOUI

  62. Determination of mode I & II strain energy release rates in composite foam core sandwiches. An experimental study of the composite foam core interfacial fracture resistance

    Article • Composites Part B Engineering, February 2017, Elsevier

    Professor Mostapha TARFAOUI

  63. Numerical investigation of damage progressive in composite tidal turbine for renewable marine energy

    Article • November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Mostapha TARFAOUI

  64. Analytical and numerical investigation of a sea water desalination plant - renewable marine energy

    Article • October 2016, Taylor & Francis

    Professor Mostapha TARFAOUI

  65. Predictions of the dynamic performance of horizontal axis marine current turbines

    Article • October 2016, Taylor & Francis

    Professor Mostapha TARFAOUI

  66. Performance of carbon nanotubes based polymer composites

    Article • Composites Part B Engineering, October 2016, Elsevier

    Professor Mostapha TARFAOUI

  67. Dynamical characterisation and damage mechanisms of E-glass/vinylester woven composites

    Article • Journal of Composite Materials, July 2016, SAGE Publications

    Professor Mostapha TARFAOUI

  68. Effect of adhesive thickness on the Mode I and II strain energy release

    Article • Composites Part B Engineering, July 2016, Elsevier

    Professor Mostapha TARFAOUI

  69. Comparison study of mechanical properties and damage kinetics of 2D and 3D woven composites

    Article • International Journal of Damage Mechanics, May 2016, SAGE Publications

    Professor Mostapha TARFAOUI

  70. Design of bare and ducted axial marine current turbines

    Article • Renewable Energy, April 2016, Elsevier

    Professor Mostapha TARFAOUI

  71. The identification of structurally sensitive zones subject to failure in a wind turbine blade using nodal displacement based finite element sub-modeling

    Article • Renewable Energy, March 2016, Elsevier

    Professor Mostapha TARFAOUI

  72. Effect of stacking sequence of the bonded composite patch on repair performance

    Article • STRUCTURAL ENGINEERING AND MECHANICS, January 2016, Techno-Press

    Professor Mostapha TARFAOUI

  73. Mechanical behavior and damage kinetics of woven E-glass/vinylester laminate composites under high strain rate dynamic compressive loading: Experimental and numerical investigation

    Article • International Journal of Impact Engineering, January 2016, Elsevier

    Professor Mostapha TARFAOUI

  74. SLAMMING IMPACT SIMULATION OF 2D WATER ENTRY FOR RIGID STRUCTURES

    Article • January 2016, ECCOMAS

    Professor Mostapha TARFAOUI

  75. a large composite wind turbine with different spar profiles

    Article • La Houille Blanche, October 2015, EDP Sciences

    Professor Mostapha TARFAOUI

  76. A practical note for SHPB test with new algorithms for delimiting pulses

    Article • Composite Structures, August 2015, Elsevier

    Professor Mostapha TARFAOUI

  77. Effect of damage progression on the heat generation and final failure of a polyester–glass fiber composite under tension–tension cyclic loading

    Article • Composites Part B Engineering, June 2014, Elsevier

    Professor Mostapha TARFAOUI

  78. Predictions of the Hydrodynamic Performance of Horizontal Axis Marine Current Turbines

    Article • Renewable Energy and Power Quality Journal, April 2014, AEDERMACP (European Association for the Development of Renewable Energies and Power Quality)

    Professor Mostapha TARFAOUI

  79. Effect of spars cross-section design on dynamic behavior of composite wind turbine blade: Modal analysis

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Mostapha TARFAOUI

  80. Mode I Interlaminar Fracture Toughness of Through-Thickness Reinforced Laminated Structures

    Article • Advanced Materials Research, December 2011, Trans Tech Publications

    Professor Mostapha TARFAOUI

  81. Design and Finite Element Modal Analysis of 48m Composite Wind Turbine Blade

    Article • Applied Mechanics and Materials, December 2011, Trans Tech Publications

    Professor Mostapha TARFAOUI

  82. Prediction of the Strength of the Adhesively Bonded Joints by the Finite Elements Method

    Article • Applied Mechanics and Materials, June 2011, Trans Tech Publications

    Professor Mostapha TARFAOUI

  83. Experimental Study of Dynamic Behaviour of Aluminum/Aluminum and Composite/Composite Double Lap Joints

    Article • Applied Mechanics and Materials, June 2011, Trans Tech Publications

    Professor Mostapha TARFAOUI

  84. Experimental Investigation of Dynamic Compression and Damage Kinetics of Glass/Epoxy Laminated Composites under High Strain Rate Compression

    Article • March 2011, IntechOpen

    Professor Mostapha TARFAOUI

  85. Experimental Investigation and Finite Element Analysis of Dynamic Behavior and Damage of Glass/Epoxy Tubular Structures

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor Mostapha TARFAOUI

  86. Dynamic Response of Symmetric and Asymmetric E-Glass / Epoxy Laminates at High Strain Rates

    Article • Key Engineering Materials, July 2010, Trans Tech Publications

    Professor Mostapha TARFAOUI

  87. FEA of Dynamic Behavior of Top Hat Bonded Stiffened Composite Panel

    Article • Key Engineering Materials, July 2010, Trans Tech Publications

    Professor Mostapha TARFAOUI

  88. Damage Kinetics of Glass/Epoxy Composite Materials Under Dynamic Compression

    Article • Journal of Composite Materials, March 2009, SAGE Publications

    Professor Mostapha TARFAOUI

  89. Damage Modelling of Impacted Tubular Structures by Using Material Property Degradation Approach

    Article • January 2009, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  90. Design and Test of a Sandwich T-Joint for Naval Ships

    Article • January 2009, Springer Science + Business Media

    Professor Mostapha TARFAOUI

  91. An interface debonding law subject to viscous regularization for avoiding instability: Application to the delamination problems

    Article • Engineering Fracture Mechanics, July 2008, Elsevier

    Professor Mostapha TARFAOUI

  92. Effect of fibre orientation on mechanical properties of the laminated polymer composites subjected to out-of-plane high strain rate compressive loadings

    Article • Composites Science and Technology, February 2008, Elsevier

    Professor Mostapha TARFAOUI

  93. Dynamic response and damage modeling of glass/epoxy tubular structures: Numerical investigation

    Article • Composites Part A Applied Science and Manufacturing, January 2008, Elsevier

    Professor Mostapha TARFAOUI

  94. Residual Strength of Damaged Glass/Epoxy Tubular Structures

    Article • Journal of Composite Materials, September 2007, SAGE Publications

    Professor Mostapha TARFAOUI

  95. Scale and Size Effects on Dynamic Response and Damage of Glass/Epoxy Tubular Structures

    Article • Journal of Composite Materials, May 2006, SAGE Publications

    Professor Mostapha TARFAOUI

  96. Damage development in thick composite tubes under impact loading and influence on implosion pressure: experimental observations

    Article • Composites Part B Engineering, June 2005, Elsevier

    Professor Mostapha TARFAOUI

  97. Prediction of Damage in Composite Cylinders After Impact

    Article • Journal of Composite Materials, May 2005, SAGE Publications

    Professor Mostapha TARFAOUI

  98. Predicting the Stress-Strain Behavior of Woven Fabrics Using the Finite Element Method

    Article • Textile Research Journal, September 2001, SAGE Publications

    Professor Mostapha TARFAOUI

  99. A finite element model of mechanical properties of plain weave

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, August 2001, Elsevier

    Professor Mostapha TARFAOUI

  100. Numerical study of the mechanical behaviour of textile structures

    Article • International Journal of Clothing Science and Technology, June 2001, Emerald

    Professor Mostapha TARFAOUI

  101. Thermo-Mechanical State of Bimaterial with an Interface Crack

    Article • Springer Science + Business Media

    Professor Mostapha TARFAOUI

  102. Application of the Finite Element Method to the Theoretical Study of the Mechanical Behaviour of Plain and Twill Fabrics

    Article • Civil-Comp, Ltd.

    Professor Mostapha TARFAOUI