Dr Andrea Malizia
Current affiliation: Department of Industrial Engineering, University of Rome Tor Vergata
Subject: Engineering & Technology
Primary location: Italy
Design and development of a compact lidar/DIAL system for aerial surveillance of urban areas
Published in:Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing IX
Publication date:2013-10-22
Automatic localization of backscattering events due to particulate in urban areas
Published in:Image and Signal Processing for Remote Sensing XX
Publication date:2014-10-23
Towards the implementation of a spectral database for the detection of biological warfare agents
Published in:Technologies for Optical Countermeasures XI; and High-Power Lasers 2014: Technology and Systems
Publication date:2014-10-07
Advanced signal processing based on support vector regression for lidar applications
Published in:Image and Signal Processing for Remote Sensing XXI
Publication date:2015-10-15
Testing the accuracy ratio of the Spatio-Temporal Epidemiological Modeler (STEM) through Ebola haemorrhagic fever outbreaks
Published in:Epidemiology and Infection
Publication date:2015-12-01What's it about?The work is based on the application of software (STEM) able to predict, through alghoritms used for numerica simulation, the diffusion of biologic...
Viral bioterrorism: Learning the lesson of Ebola virus in West Africa 2013–2015
Published in:Virus Research
Publication date:2015-12-01
Design of a new experimental facility to reproduce LOVA and LOCA consequences on dust resuspension
Published in:Fusion Engineering and Design
Publication date:2015-10-01
Ebola Virus Disease 2013-2014 Outbreak in West Africa: An Analysis of the Epidemic Spread and Response
Published in:International Journal of Microbiology
Publication date:2015-01-01
Simulations and Experiments to Reach Numerical Multiphase Informations for Security Analysis on Large Volume Vacuum Systems Like Tokamaks
Published in:Journal of Fusion Energy
Publication date:2015-03-19
Dust tracking techniques applied to the STARDUST facility: First results
Published in:Fusion Engineering and Design
Publication date:2014-10-01
Use of Particle Counter System for the Optimization of Sampling, Identification and Decontamination Procedures for Biological Aerosols Dispersion i...
Published in:Journal of Microbial & Biochemical Technology
Publication date:2013-01-01
UMEL: A new regression tool to identify measurement peaks in LIDAR/DIAL systems for environmental physics applications
Published in:Review of Scientific Instruments
Publication date:2014-06-01
Safety Analysis in Large Volume Vacuum Systems Like Tokamak: Experiments and Numerical Simulation to Analyze Vacuum Ruptures Consequences
Published in:Advances in Materials Science and Engineering
Publication date:2014-01-01
Numerical study of air jet flow field during a loss of vacuum
Published in:Fusion Engineering and Design
Publication date:2014-10-01
Fluorescence measurements for the identification of biological agents features for the construction of a spectra database
Published in:2014 Fotonica AEIT Italian Conference on Photonics Technologies
Publication date:2014-05-01
Detection of pollutant sources in the atmosphere with Lidar/Dial techniques: Results of an experimental campaign in the south of Italy
Published in:2014 Fotonica AEIT Italian Conference on Photonics Technologies
Publication date:2014-05-01
Biological Emergency Management: The Case of Ebola 2014 and the Air Transportation Involvement
Published in:Journal of Microbial & Biochemical Technology
Publication date:2014-01-01
Application of Real-Time PCR to Identify Residual Bio-Decontamination of Confined Environments after Hydrogen Peroxide Vapor Treatment: Preliminary...
Published in:Journal of Microbial & Biochemical Technology
Publication date:2013-01-01
Large eddy simulation of Loss of Vacuum Accident in STARDUST facility
Published in:Fusion Engineering and Design
Publication date:2013-10-01
Validation of a loss of vacuum accident (LOVA) Computational Fluid Dynamics (CFD) model
Published in:Fusion Engineering and Design
Publication date:2011-10-01
STARDUST experimental campaign and numerical simulations: influence of obstacles and temperature on dust resuspension in a vacuum vessel under LOVA
Published in:Nuclear Fusion
Publication date:2011-04-27
Loss of vacuum accident (LOVA): Comparison of computational fluid dynamics (CFD) flow velocities against experimental data for the model validation
Published in:Fusion Engineering and Design
Publication date:2011-06-01
First open field measurements with a portable CO 2 lidar/dial system for early forest fires detection
Published in:Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing VII
Publication date:2011-10-06
Planetary boundary layer (PBL) monitoring by means of two laser radar systems: experimental results and comparison
Published in:Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing VI
Publication date:2010-10-07
Operating experiences from existing fusion facilities in view of ITER safety and reliability
Published in:Fusion Engineering and Design
Publication date:2010-12-01
Raman water vapour concentration measurements for reduction of false alarms in forest fire detection
Published in:Lidar Technologies, Techniques, and Measurements for Atmospheric Remote Sensing V
Publication date:2009-09-17
Image computing techniques to extrapolate data for dust tracking in case of an experimental accident simulation in a nuclear fusion plant
Published in:Review of Scientific Instruments
Publication date:2016-01-01
First Experimental Campaign to Demonstrate STARDUST-Upgrade Facility Diagnostics Capability to Investigate LOVA Conditions
Published in:Journal of Fusion Energy
Publication date:2015-07-11
First attempts at measuring widespread smoke with a mobile lidar system
Published in:2015 Fotonica AEIT Italian Conference on Photonics Technologies
Publication date:2015-01-01
First 3D numerical simulations validated with experimental measurements during a LOVA reproduction inside the new facility STARDUST-Upgrade
Published in:Fusion Engineering and Design
Publication date:2015-12-01
Development of a rapid method for the automatic classification of biological agents' fluorescence spectral signatures
Published in:Optical Engineering
Publication date:2015-11-24
Multispectral analysis of biological agents to implement a quick tool for stand-off biological detection
Published in:Optics and Photonics for Counterterrorism, Crime Fighting, and Defence XI; and Optical Materials and Biomaterials in Security and Defence Systems Technology XII
Publication date:2015-10-21
Numerical Simulations as Tool to Predict Chemical and Radiological Hazardous Diffusion in Case of Nonconventional Events
Published in:Modelling and Simulation in Engineering
Publication date:2016-01-01
X-ray High-resolution Spectroscopy for Laser-produced Plasma
Published in:Physics Procedia
Publication date:2015-01-01
Shadowgraph Technique Applied to STARDUST Facility for Dust Tracking: First Results
Published in:Physics Procedia
Publication date:2015-01-01
Detection and monitoring of pollutant sources with Lidar/Dial techniques
Published in:Journal of Physics Conference Series
Publication date:2015-11-18
Disaster management in case of CBRNe events: an innovative methodology to improve the safety knowledge of advisors and first responders
Published in:Defense and Security Analysis
Publication date:2016-01-02
New analysis methods to push the boundaries of diagnostic techniques in the environmental sciences
Published in:Journal of Instrumentation
Publication date:2016-04-29
Biological Dual-Use Research and Synthetic Biology of Yeast
Published in:Science and Engineering Ethics
Publication date:2016-06-20
Modelling and Simulation for Major Incidents
Published in:Proceedings of the 9th International Conference on Pervasive Computing Technologies for Healthcare
Publication date:2015-01-01
‘G.A.T.E’: Gap analysis for TTX evaluation
Published in:Not available
Publication date:2016-01-01
A novel integrated approach for the hazardous radioactive dust source terms estimation in future nuclear fusion power plants
Published in:Heliyon
Publication date:2016-10-01
A Review of Dangerous Dust in Fusion Reactors: from Its Creation to Its Resuspension in Case of LOCA and LOVA
Published in:Energies
Publication date:2016-07-25
Flow Motion and Dust Tracking Software for PIV and Dust PTV
Published in:Journal of Failure Analysis and Prevention
Publication date:2016-11-08
A support vector machine approach to the automatic identification of fluorescence spectra emitted by biological agents
Published in:Optics and Photonics for Counterterrorism, Crime Fighting, and Defence XII
Publication date:2016-11-21
Real-time vehicle emissions monitoring using a compact LiDAR system and conventional instruments: first results of an experimental campaign in a su...
Published in:Optical Engineering
Publication date:2016-10-18
A Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical Industry
Published in:Materials Science Forum
Publication date:2016-11-01
Lidar and Dial application for detection and identification: a proposal to improve safety and security
Published in:Journal of Instrumentation
Publication date:2017-01-19
Mini-DIAL system measurements coupled with multivariate data analysis to identify TIC and TIM simulants: preliminary absorption database analysis.
Published in:Journal of Physics Conference Series
Publication date:2017-01-01
STARDUST-U experiments on fluid-dynamic conditions affecting dust mobilization during LOVAs
Published in:Journal of Instrumentation
Publication date:2016-07-25
3D numerical simulations of a LOVA reproduction inside the new facility STARDUST-UPGRADE
Published in:Journal of Instrumentation
Publication date:2017-02-01
Methodology of the source term estimation for DEMO reactor
Published in:Fusion Engineering and Design
Publication date:2017-05-01
Plasma-material Interactions Problems and Dust Creation and Re-suspension in Case of Accidents in Nuclear Fusion Plants: A New Challenge for Reacto...
Published in:Advanced Surface Engineering Materials
Publication date:2016-09-24
3D Simulation of a Loss of Vacuum Accident (LOVA) in ITER (International Thermonuclear Experimental Reactor): Evaluation of Static Pressure, Mach N...
Published in:Energies
Publication date:2018-04-05
Imaging of dust re-suspension in case of LOVA
Published in:Fusion Engineering and Design
Publication date:2018-01-01
Efficient generation of energetic ions in multi-ion plasmas by radio-frequency heating
Published in:Nature Physics
Publication date:2017-06-19
First tests of a multi-wavelength mini-DIAL system for the automatic detection of greenhouse gases
Published in:Remote Sensing of Clouds and the Atmosphere XXII
Publication date:2017-10-13
Imaging to study dust re-suspension phenomena in case of loss of vacuum accidents inside the pharmaceutical industries
Published in:2017 Global Internet of Things Summit (GIoTS)
Publication date:2017-06-01
Non-invasive assessment of dust concentration and relative dustiness in a dust cloud mobilized by a controlled air inlet inside STARDUST-U facility
Published in:Reliability Engineering & System Safety
Publication date:2017-11-01
Optical measures of dust velocities and direction during loss of vacuum accidents in confined environment and correlation between dust positions an...
Published in:Journal of Physics Conference Series
Publication date:2017-08-01
Overview of the JET results in support to ITER
Published in:Nuclear Fusion
Publication date:2017-06-15
Use of integrated technologies for fire monitoring and first alert
Published in:2016 IEEE 10th International Conference on Application of Information and Communication Technologies (AICT)
Publication date:2016-10-01