All Stories

  1. Rotational moulding of poly-lactic acid; effect of plasticization and degree of crystallinity

    Article • January 2023, American Institute of Physics

    Professor Alfonso Maffezzoli

  2. Production and Characterization of Polyethylene Terephthalate Nanoparticles

    Article • Polymers, October 2021, MDPI AG

    Professor Alfonso Maffezzoli

  3. Time-dependent shape of bistable unsymmetric carbon fibers-epoxy thin laminates

    Article • Smart Materials and Structures, January 2021, Institute of Physics Publishing

    Professor Alfonso Maffezzoli

  4. Correlation between elastic properties and morphology in short fiber composites by X-ray computed micro-tomography

    Article • Composites Part A Applied Science and Manufacturing, January 2021, Elsevier

    Professor Alfonso Maffezzoli

  5. Experimental and Numerical Study of Vacuum Resin Infusion of Stiffened Carbon Fiber Reinforced Panels

    Article • Materials, October 2020, MDPI AG

    Professor Alfonso Maffezzoli

  6. Deep Control of Linear Oligomerization of Glycerol Using Lanthanum Catalyst on Mesoporous Silica Gel

    Article • Catalysts, October 2020, MDPI AG

    Professor Alfonso Maffezzoli

  7. 3D Printing of Polymer Waste for Improving People’s Awareness about Marine Litter

    Article • Polymers, August 2020, MDPI AG

    Professor Alfonso Maffezzoli

  8. Out-Of-Plane Permeability Evaluation of Carbon Fiber Preforms by Ultrasonic Wave Propagation

    Article • Materials, June 2020, MDPI AG

    Professor Alfonso Maffezzoli

  9. Active SHM for composite pipes using piezoelectric sensors

    Article • Materials Today Proceedings, January 2020, Elsevier

    Professor Alfonso Maffezzoli

  10. Stress relaxation in asymmetric bistable composites: Experiments and simulations

    Article • Materials Today Proceedings, December 2019, Elsevier

    Professor Alfonso Maffezzoli

  11. Reversible techniques for FRP-confinement of masonry columns

    Article • Construction and Building Materials, November 2019, Elsevier

    Professor Alfonso Maffezzoli

  12. Reliability of Protective Coatings for Flexible Piezoelectric Transducers in Aqueous Environments

    Article • Micromachines, October 2019, MDPI AG

    Professor Alfonso Maffezzoli

  13. Catalytic Activity of Oxidized Carbon Waste Ashes for the Crosslinking of Epoxy Resins

    Article • Polymers, June 2019, MDPI AG

    Professor Alfonso Maffezzoli

  14. Rheological analysis of thermo-responsive alginate/PNIPAAm graft copolymers synthesized by gamma radiation

    Article • Radiation Physics and Chemistry, March 2019, Elsevier

    Professor Alfonso Maffezzoli

  15. Processing of Super Tough Plasticized PLA by Rotational Molding

    Article • Advances in Polymer Technology, February 2019, Hindawi Publishing Corporation

    Professor Alfonso Maffezzoli

  16. Mechanical properties of poly(lactid acid) plasticized by cardanol derivatives

    Article • Polymer Degradation and Stability, January 2019, Elsevier

    Professor Alfonso Maffezzoli

  17. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization

    Article • Composites Part B Engineering, July 2018, Elsevier

    Professor Alfonso Maffezzoli

  18. Effects of Blank Quality on Press-Formed PEKK/Carbon Composite Parts

    Article • Materials, June 2018, MDPI AG

    Professor Alfonso Maffezzoli

  19. Lay-Up and Consolidation of a Composite Pipe by In Situ Ultrasonic Welding of a Thermoplastic Matrix Composite Tape

    Article • Materials, May 2018, MDPI AG

    Professor Alfonso Maffezzoli

  20. Mechanical characterization of bistable laminates for very small aircraft morphing applications

    Article • March 2018, SPIE

    Dr Francesco Nicassio, Professor Alfonso Maffezzoli

  21. One-step solvent-free process for the fabrication of high loaded PLA/HA composite filament for 3D printing

    Article • Journal of Thermal Analysis and Calorimetry, March 2018, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  22. Thermal analysis of poly(lactic acid) plasticized by cardanol derivatives

    Article • Journal of Thermal Analysis and Calorimetry, February 2018, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  23. Hybrid welding of carbon-fiber reinforced epoxy based composites

    Article • Composites Part A Applied Science and Manufacturing, January 2018, Elsevier

    Professor Alfonso Maffezzoli

  24. Synthesis, Curing, and Properties of an Epoxy Resin Derived from Gallic Acid

    Article • BioResources, November 2017, BioResources

    Professor Alfonso Maffezzoli

  25. UV and thermal stability of soft PVC plasticized with cardanol derivatives

    Article • Journal of Cleaner Production, October 2017, Elsevier

    Professor Alfonso Maffezzoli

  26. Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites

    Article • Journal of Materials Processing Technology, September 2017, Elsevier

    Professor Alfonso Maffezzoli

  27. PolyDiethyleneglycol–bisallyl carbonate matrix transparent nanocomposites reinforced with bacterial cellulose microfibrils

    Article • European Polymer Journal, August 2017, Elsevier

    Professor Alfonso Maffezzoli

  28. Antimicrobial modified hydroxyapatite composite dental bite by stereolithography

    Article • Polymers for Advanced Technologies, July 2017, Wiley

    Professor Alfonso Maffezzoli, Анна Берсенёва

  29. Adhesive joints with improved mechanical properties for aerospace applications

    Article • International Journal of Adhesion and Adhesives, June 2017, Elsevier

    Dr Francesco Nicassio, Professor Alfonso Maffezzoli

  30. Diffusion in oriented lamellar nanocomposite: Numerical analysis of the effects of dispersion and intercalation

    Article • Computational Materials Science, June 2017, Elsevier

    Professor Alfonso Maffezzoli

  31. Catalytic Activity of Oxidized Carbon Black and Graphene Oxide for the Crosslinking of Epoxy Resins

    Article • Polymers, April 2017, MDPI AG

    Professor Alfonso Maffezzoli

  32. Finite element modeling of continuous induction welding of thermoplastic matrix composites

    Article • Materials & Design, April 2017, Elsevier

    Professor Alfonso Maffezzoli

  33. Resin pressure evolution during autoclave curing of epoxy matrix composites

    Article • Polymer Engineering & Science, March 2017, Wiley

    Professor Alfonso Maffezzoli

  34. Effect of binder powders added to carbon fiber reinforcements on the chemoreology of an epoxy resin for composites

    Article • Composites Part B Engineering, March 2017, Elsevier

    Professor Alfonso Maffezzoli

  35. 3D printing of hydroxyapatite polymer-based composites for bone tissue engineering

    Article • Journal of Polymer Engineering, January 2017, De Gruyter

    Professor Alfonso Maffezzoli

  36. Mechanical and durability properties of soft PVC plasticized by cardanol derivatives

    Article • January 2017, American Institute of Physics

    Professor Alfonso Maffezzoli

  37. Curing and viscoelasticity of vitrimers

    Article • Soft Matter, January 2017, Royal Society of Chemistry

    Professor Alfonso Maffezzoli

  38. Effect of the epoxidation yield of a cardanol derivative on the plasticization and durability of soft PVC

    Article • Polymer Degradation and Stability, December 2016, Elsevier

    Professor Alfonso Maffezzoli

  39. The feasibility of printing polylactic acid-nanohydroxyapatite composites using a low-cost fused deposition modeling 3D printer

    Article • Journal of Applied Polymer Science, November 2016, Wiley

    Professor Alfonso Maffezzoli

  40. Use of cardanol derivatives as plasticizers for PVC

    Article • Journal of Vinyl and Additive Technology, November 2016, Wiley

    Professor Alfonso Maffezzoli

  41. Epoxy Resin Catalyzed by Graphite-Based Nanofillers

    Article • International Polymer Processing, November 2016, Carl Hanser Verlag

    Professor Alfonso Maffezzoli

  42. Solubility and Durability of Cardanol Derived Plasticizers for Soft PVC

    Article • International Polymer Processing, November 2016, Carl Hanser Verlag

    Professor Alfonso Maffezzoli

  43. Smoldering and Flame Resistant Textiles via Conformal Barrier Formation

    Article • Advanced Materials Interfaces, November 2016, Wiley

    Professor Alfonso Maffezzoli

  44. Orientation of Graphene Nanoplatelets in Thermosetting Matrices

    Article • IEEE Transactions on Nanotechnology, November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  45. Cardanol derivatives as innovative bio-plasticizers for poly-(lactic acid)

    Article • Polymer Degradation and Stability, October 2016, Elsevier

    Professor Alfonso Maffezzoli

  46. A Measure of CNTs Dispersion in Polymers With Branched Molecular Architectures by UDMA

    Article • IEEE Transactions on Nanotechnology, September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  47. Nanostructured active chitosan-based films for food packaging applications: Effect of graphene stacks on mechanical properties

    Article • Measurement, August 2016, Elsevier

    Professor Alfonso Maffezzoli

  48. Development of hybrid cotton/hydrogel yarns with improved absorption properties for biomedical applications

    Article • Materials Science and Engineering C, June 2016, Elsevier

    Professor Alfonso Maffezzoli

  49. A mathematical modeling approach to optimize composite parts placement in autoclave

    Article • International Transactions in Operational Research, May 2016, Wiley

    Professor Alfonso Maffezzoli

  50. Effect of multi-scale diffusion on the permeability behavior of intercalated nanocomposites

    Article • Journal of Membrane Science, May 2016, Elsevier

    Professor Alfonso Maffezzoli

  51. Modeling of continuous ultrasonic impregnation and consolidation of thermoplastic matrix composites

    Article • Composites Part A Applied Science and Manufacturing, March 2016, Elsevier

    Professor Alfonso Maffezzoli

  52. A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation

    Article • February 2016, Taylor & Francis

    Professor Alfonso Maffezzoli

  53. Rotational moulding of poly-lactic acid

    Article • January 2016, American Institute of Physics

    Professor Alfonso Maffezzoli

  54. Resin flow and void formation in an autoclave cure cycle

    Article • January 2016, American Institute of Physics

    Professor Alfonso Maffezzoli

  55. Graphene oxide as a catalyst for ring opening reactions in amine crosslinking of epoxy resins

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Alfonso Maffezzoli

  56. Rotational Molding of Poly(lactic acid): Effect of Polymer Grade and Granulometry

    Article • Advances in Polymer Technology, November 2015, Wiley

    Professor Alfonso Maffezzoli

  57. Finite element simulation and analytical modeling of 3D multi scale diffusion in nanocomposites with permeable stacks

    Article • Modelling and Simulation in Materials Science and Engineering, November 2015, Institute of Physics Publishing

    Professor Alfonso Maffezzoli

  58. Mechanical behavior of fibers and films based on PP/Quartz composites

    Article • Polymer Composites, August 2015, Wiley

    Professor Alfonso Maffezzoli

  59. Rotational molding of biodegradable composites obtained with PLA reinforced by the wooden backbone of opuntia ficus indica cladodes

    Article • Journal of Applied Polymer Science, July 2015, Wiley

    Professor Alfonso Maffezzoli

  60. Fabrication of a thermoplastic matrix composite stiffened panel by induction welding

    Article • Aerospace Science and Technology, June 2015, Elsevier

    Professor Alfonso Maffezzoli

  61. Structural behaviour modelling of bolted joints in composite laminates subjected to cyclic loading

    Article • Aerospace Science and Technology, June 2015, Elsevier

    Professor Alfonso Maffezzoli

  62. Ultrasonic Assisted Consolidation of Commingled Thermoplastic/Glass Fiber Rovings

    Article • Frontiers in Materials, April 2015, Frontiers

    Professor Alfonso Maffezzoli

  63. Analysis of the Suitability of Poly(lactic acid) in Rotational Molding Process

    Article • Advances in Polymer Technology, February 2015, Wiley

    Professor Alfonso Maffezzoli

  64. Processing and characterization of amorphous polyethylene terephthalate fibers for the alignment of carbon nanofillers in thermosetting resins

    Article • Polymer Composites, January 2015, Wiley

    Professor Alfonso Maffezzoli

  65. A magnetic and highly reusable macroporous superhydrophobic/superoleophilic PDMS/MWNT nanocomposite for oil sorption from water

    Article • Journal of Materials Chemistry A, January 2015, Royal Society of Chemistry

    Professor Alfonso Maffezzoli

  66. Solubility and durability of cardanol derived plasticizers for soft PVC

    Article • January 2015, American Institute of Physics

    Professor Alfonso Maffezzoli

  67. Cure reaction of epoxy resins catalyzed by graphite-based nanofiller

    Article • January 2015, American Institute of Physics

    Professor Alfonso Maffezzoli

  68. Finite Element Modeling of Multiscale Diffusion in Intercalated Nanocomposites

    Article • Journal of Nanomaterials, January 2015, Hindawi Publishing Corporation

    Professor Alfonso Maffezzoli

  69. Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering

    Article • Ceramics International, December 2014, Elsevier

    Professor Alfonso Maffezzoli

  70. Mechanical properties of basalt fibers and their adhesion to polypropylene matrices

    Article • Composites Part B Engineering, December 2014, Elsevier

    Professor Alfonso Maffezzoli

  71. Catalytic activity of graphite-based nanofillers on cure reaction of epoxy resins

    Article • Polymer, October 2014, Elsevier

    Professor Alfonso Maffezzoli

  72. A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation

    Article • Materials, July 2014, MDPI AG

    Professor Alfonso Maffezzoli

  73. A methodology to orient carbon nanotubes in a thermosetting matrix

    Article • Composites Science and Technology, May 2014, Elsevier

    Professor Alfonso Maffezzoli

  74. Sintering of PLLA powders for rotational molding

    Article • Thermochimica Acta, April 2014, Elsevier

    Professor Alfonso Maffezzoli

  75. Analysis and Characterization of the Mechanical Structure for the I-Tracker of the Mu2e Experiment

    Article • Nuclear Physics B - Proceedings Supplements, March 2014, Elsevier

    Professor Alfonso Maffezzoli

  76. Rotational molding of bio-polymers

    Article • January 2014, American Institute of Physics

    Professor Alfonso Maffezzoli

  77. Carbon nanotube alignment in a thermosetting resin

    Article • January 2014, American Institute of Physics

    Professor Alfonso Maffezzoli

  78. Rotational molding of pultruded profiles reinforced polyethylene

    Article • January 2014, American Institute of Physics

    Professor Alfonso Maffezzoli

  79. Development of semi- and grafted interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and collagen

    Article • Journal of Applied Biomaterials & Functional Materials, January 2014, SAGE Publications

    Professor Alfonso Maffezzoli

  80. Selective reinforcement of LLDPE components produced by rotational molding with thermoplastic matrix pultruded profiles

    Article • Composites Part B Engineering, January 2014, Elsevier

    Professor Alfonso Maffezzoli

  81. Replicating degradable artefacts. A project for analysis and exhibition of early medieval objects from the Byzantine village at Scorpo (Supersano, Italy)

    Article • October 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  82. Monitoring the Cure State of Thermosetting Resins by Ultrasound

    Article • Materials, September 2013, MDPI AG

    Professor Alfonso Maffezzoli

  83. Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae

    Article • Journal of Membrane Science, September 2013, Elsevier

    Professor Alfonso Maffezzoli

  84. Experimental measurement of transversal micro- and macro permeability during compression molding of PP/Glass composites

    Article • Polymer Composites, August 2013, Wiley

    Professor Alfonso Maffezzoli

  85. Transport properties of graphite/epoxy composites: Thermal, permeability and dielectric characterization

    Article • Polymer Testing, August 2013, Elsevier

    Professor Alfonso Maffezzoli

  86. Ultra-low mass drift chambers

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, August 2013, Elsevier

    Professor Alfonso Maffezzoli

  87. Polymer Nanocomposites Characterized by Thermal Analysis Techniques

    Article • June 2013, Wiley

    Professor Alfonso Maffezzoli

  88. A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers

    Article • Journal of Polymers and the Environment, June 2013, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  89. Potential of Cellulose-Based Superabsorbent Hydrogels as Water Reservoir in Agriculture

    Article • International Journal of Polymer Science, January 2013, Hindawi Publishing Corporation

    Professor Alfonso Maffezzoli

  90. Development and Characterization of Amorphous Thermoplastic Matrix Graphene Nanocomposites

    Article • Materials, October 2012, MDPI AG

    Professor Alfonso Maffezzoli

  91. Monitoring Wood Degradation during Weathering by Cellulose Crystallinity

    Article • Materials, October 2012, MDPI AG

    Professor Alfonso Maffezzoli

  92. Effect of the addition of organically modified nanofiller on the relaxation behavior of a thermoplastic amorphous matrix

    Article • Thermochimica Acta, September 2012, Elsevier

    Professor Alfonso Maffezzoli

  93. Antibacterial natural leather for application in the public transport system

    Article • Journal of Coatings Technology and Research, August 2012, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  94. An Overview of Progress and Current Challenges in Ultrasonic Treatment of Polymer Melts

    Article • Advances in Polymer Technology, August 2012, Wiley

    Professor Alfonso Maffezzoli

  95. The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks

    Article • Polymer Engineering & Science, August 2012, Wiley

    Professor Alfonso Maffezzoli

  96. Echographic detectability of optoacoustic signals from low-concentration PEG-coated gold nanorods

    Article • International Journal of Nanomedicine, August 2012, Taylor & Francis

    Dr Francesco Conversano, Professor Alfonso Maffezzoli

  97. Thermoplastic Composite Manufacturing Cost Analysis

    Article • July 2012, Wiley

    Professor Alfonso Maffezzoli

  98. Thermoforming of Thermoplastics Matrix Composites

    Article • July 2012, Wiley

    Professor Alfonso Maffezzoli

  99. Rotational Molding of Polyamide-6 Nanocomposites with Improved Flame Retardancy

    Article • International Polymer Processing, July 2012, Carl Hanser Verlag

    Professor Alfonso Maffezzoli

  100. Optimization of Parts Placement in Autoclave Processing of Composites

    Article • Applied Composite Materials, March 2012, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  101. Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix

    Article • Journal of Composite Materials, March 2012, SAGE Publications

    Professor Alfonso Maffezzoli

  102. Low-velocity impact response in composite plates embedding shape memory alloy wires

    Article • Polymer Composites, March 2012, Wiley

    Professor Alfonso Maffezzoli

  103. Silver-coated wool yarns with durable antibacterial properties

    Article • Journal of Applied Polymer Science, January 2012, Wiley

    Professor Alfonso Maffezzoli

  104. Analysis of ageing of amorphous thermoplastic polymers by PVT analysis

    Article • January 2012, American Institute of Physics

    Professor Alfonso Maffezzoli

  105. Engineering Nanostructured Silver Coatings for Antimicrobial Applications

    Article • December 2011, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  106. Ultrasonic transducers for cure monitoring: design, modelling and validation

    Article • Measurement Science and Technology, November 2011, Institute of Physics Publishing

    Professor Alfonso Maffezzoli

  107. Micro- and macro-impregnation of fabrics using thermoplastic matrices

    Article • Journal of Thermoplastic Composite Materials, November 2011, SAGE Publications

    Professor Alfonso Maffezzoli

  108. Processing and Properties of a Polymer/Composite Double-Layer Laminate

    Article • Advances in Polymer Technology, October 2011, Wiley

    Professor Alfonso Maffezzoli

  109. An investigation into sintering of PA6 nanocomposite powders for rotational molding

    Article • Journal of Thermal Analysis and Calorimetry, September 2011, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  110. Curing Agent

    Article • September 2011, Wiley

    Professor Alfonso Maffezzoli

  111. Antibacterial coatings on haemodialysis catheters by photochemical deposition of silver nanoparticles

    Article • Journal of Materials Science Materials in Medicine, June 2011, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  112. On-line Consolidation of Commingled Polypropylene/Glass Roving During Filament Winding

    Article • Journal of Thermoplastic Composite Materials, May 2011, SAGE Publications

    Professor Alfonso Maffezzoli

  113. Effects of diffusion of a naturally-derived plasticizer from soft PVC

    Article • Polymer Degradation and Stability, May 2011, Elsevier

    Professor Alfonso Maffezzoli

  114. Hepatic Vessel Segmentation for 3D Planning of Liver Surgery

    Article • Academic Radiology, April 2011, Elsevier

    Professor Alfonso Maffezzoli

  115. Assessment of the relevance of sintering in thermoplastic commingled yarn consolidation

    Article • Polymer Composites, March 2011, Wiley

    Professor Alfonso Maffezzoli

  116. Evaluation of the degree of dispersion of nanofillers by mechanical, rheological, and permeability analysis

    Article • Polymer Engineering & Science, February 2011, Wiley

    Professor Alfonso Maffezzoli

  117. Plasticizer for poly(vinyl chloride) from cardanol as a renewable resource material

    Article • Polymer Degradation and Stability, November 2010, Elsevier

    Professor Alfonso Maffezzoli

  118. Cardanol Based Matrix for Jute Reinforced Pipes

    Article • Macromolecular Symposia, October 2010, Wiley

    Professor Alfonso Maffezzoli

  119. Processing, mechanical properties, and interfacial bonding of a thermoplastic core-foam/composite-skin sandwich panel

    Article • Advances in Polymer Technology, September 2010, Wiley

    Professor Alfonso Maffezzoli

  120. Analysis of the structure and mass transport properties of clay nanocomposites based on amorphous PET

    Article • Journal of Applied Polymer Science, July 2010, Wiley

    Professor Alfonso Maffezzoli

  121. Numerical simulation of the microscale impregnation in commingled thermoplastic composite yarns

    Article • Advances in Polymer Technology, July 2010, Wiley

    Professor Alfonso Maffezzoli

  122. Preface to the special issue: Thermoplastic composite materials

    Article • Advances in Polymer Technology, July 2010, Wiley

    Professor Alfonso Maffezzoli

  123. Water Vapor Permeability of Clay Nanocomposites Based on Amorphous PET

    Article • Defect and Diffusion Forum, April 2010, Trans Tech Publications

    Professor Alfonso Maffezzoli

  124. Development and characterization of cellulose-based hydrogels for use as dietary bulking agents

    Article • Journal of Applied Polymer Science, February 2010, Wiley

    Professor Alfonso Maffezzoli

  125. Structural relaxation of amorphous PET matrix nanocomposites

    Article • January 2010, American Institute of Physics

    Professor Alfonso Maffezzoli

  126. Nanofilled polyols for viscoelastic polyurethane foams

    Article • Polymer International, November 2009, Wiley

    Professor Alfonso Maffezzoli

  127. Effect of a Nanodispersed Clay Fillers on Glass Transition of Thermosetting Polyurethane

    Article • Macromolecular Symposia, November 2009, Wiley

    Professor Alfonso Maffezzoli

  128. Effects of thermal history in the ring opening polymerization of CBT and its mixtures with montmorillonite on the crystallization of the resulting poly(butylene terephthalate)

    Article • Thermochimica Acta, September 2009, Elsevier

    Professor Alfonso Maffezzoli

  129. Analysis of the structure and mass transport properties of nanocomposite polyurethane

    Article • Polymer Engineering & Science, September 2009, Wiley

    Professor Alfonso Maffezzoli

  130. Synthesis and characterization of optically transparent epoxy matrix nanocomposites

    Article • Materials Science and Engineering C, August 2009, Elsevier

    Professor Alfonso Maffezzoli

  131. Characterization of antibacterial silver coated yarns

    Article • Journal of Materials Science Materials in Medicine, June 2009, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  132. Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength

    Article • Waste Management, June 2009, Elsevier

    Professor Alfonso Maffezzoli

  133. Collagen- and gelatine-based films sealing vascular prostheses: evaluation of the degree of crosslinking for optimal blood impermeability

    Article • Journal of Materials Science Materials in Medicine, May 2009, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  134. UV-curable epoxy systems containing hyperbranched polymers: Kinetics investigation by photo-DSC and real-time FT-IR experiments

    Article • Polymer Testing, April 2009, Elsevier

    Professor Alfonso Maffezzoli

  135. Mechanical and Vibration Characteristics of Laminated Composite Plates Embedding Shape Memory Alloy Superelastic Wires

    Article • Journal of Materials Engineering and Performance, March 2009, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  136. Glass transition in thermosetting clay-nanocomposite polyurethanes

    Article • Thermochimica Acta, March 2009, Elsevier

    Professor Alfonso Maffezzoli

  137. Polymer characterization by ultrasonic wave propagation

    Article • Advances in Polymer Technology, February 2009, Wiley

    Professor Alfonso Maffezzoli

  138. Embedding of Superelastic SMA Wires into Composite Structures: Evaluation of Impact Properties

    Article • Journal of Materials Engineering and Performance, February 2009, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  139. Development and characterisation of jute reinforced natural matrix composites

    Article • International Journal of Materials and Product Technology, January 2009, Inderscience Publishers

    Professor Alfonso Maffezzoli

  140. Nonsupercritical synthesis of microporous gels

    Article • Journal of Applied Polymer Science, December 2008, Wiley

    Professor Alfonso Maffezzoli

  141. Novel superabsorbent cellulose-based hydrogels crosslinked with citric acid

    Article • Journal of Applied Polymer Science, November 2008, Wiley

    Professor Alfonso Maffezzoli

  142. Hydrogel based tissue mimicking phantom forin-vitroultrasound contrast agents studies

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, November 2008, Wiley

    Professor Alfonso Maffezzoli

  143. Spring-in angle as molding distortion for thermoplastic matrix composite

    Article • Composites Science and Technology, November 2008, Elsevier

    Professor Alfonso Maffezzoli

  144. Photo – DSC and real time – FT-IR kinetic study of a UV curable epoxy resin containing o-Boehmites

    Article • European Polymer Journal, July 2008, Elsevier

    Professor Alfonso Maffezzoli

  145. Efficient utilization of plastic waste through product design and process adaptation: A case study on stiffness enhancement of beams produced from plastic lumber

    Article • Advances in Polymer Technology, June 2008, Wiley

    Professor Alfonso Maffezzoli

  146. Synthesis and characterization of clay-nanocomposite solvent-based polyurethane adhesives

    Article • International Journal of Adhesion and Adhesives, April 2008, Elsevier

    Professor Alfonso Maffezzoli

  147. Correction of melting peaks of different PE grades accounting for heat transfer in DSC samples

    Article • Polymer Testing, February 2008, Elsevier

    Professor Alfonso Maffezzoli

  148. CLAY-NANOCOMPOSITES POLYURETHANE ADHESIVES : ANALYSIS OF THE RIGID AMORPHOUS FRACTION

    Article • January 2008, American Institute of Physics

    Professor Alfonso Maffezzoli

  149. Acrylic-based hydrogel phantom forin vitroultrasound contrast agent characterization

    Article • Virtual and Physical Prototyping, December 2007, Taylor & Francis

    Professor Alfonso Maffezzoli

  150. Spin coating cellulose derivatives on quartz crystal microbalance plates to obtain hydrogel-based fast sensors and actuators

    Article • Journal of Applied Polymer Science, August 2007, Wiley

    Professor Alfonso Maffezzoli

  151. Air-Coupled Ultrasound: A Novel Technique for Monitoring the Curing of Thermosetting Matrices

    Article • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, July 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  152. Flexural creep behaviour of PP matrix woven composite

    Article • Composites Science and Technology, May 2007, Elsevier

    Professor Alfonso Maffezzoli

  153. Air-Coupled Ultrasonic Cure Monitoring of Unsaturated Polyester Resins

    Article • Macromolecular Symposia, February 2007, Wiley

    Professor Alfonso Maffezzoli

  154. Synthesis of a novel cardanol-based benzoxazine monomer and environmentally sustainable production of polymers and bio-composites

    Article • Green Chemistry, January 2007, Royal Society of Chemistry

    Professor Alfonso Maffezzoli

  155. Air-coupled ultrasonic cure monitoring of composite matrices

    Article • January 2007, Vienna University of Technology, Institute of General Physics

    Professor Alfonso Maffezzoli

  156. A preliminary study on bladder-assisted rotomolding of thermoplastic polymer composites

    Article • Advances in Polymer Technology, January 2007, Wiley

    Professor Alfonso Maffezzoli

  157. Recycling of PP-based Sandwich Panels with Continuous Fiber Composite Skins

    Article • Journal of Thermoplastic Composite Materials, November 2006, SAGE Publications

    Professor Alfonso Maffezzoli

  158. Synthesis and characterization of macroporous poly(ethylene glycol)-based hydrogels for tissue engineering application

    Article • Journal of Biomedical Materials Research Part A, November 2006, Wiley

    Professor Alfonso Maffezzoli

  159. Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis

    Article • Rheologica Acta, October 2006, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  160. Ceramic Composites for Automotive Friction Devices

    Article • October 2006, CrossRef Test Account

    Professor Alfonso Maffezzoli

  161. Ceramic Composites for Automotive Friction Devices

    Article • Advances in Science and Technology, October 2006, Trans Tech Publications

    Professor Alfonso Maffezzoli

  162. Free form fabrication of silica moulds for aluminium casting by stereolithography

    Article • Rapid Prototyping Journal, August 2006, Emerald

    Professor Alfonso Maffezzoli

  163. Ultrasonic investigation of wheat starch retrogradation

    Article • Journal of Food Engineering, July 2006, Elsevier

    Professor Alfonso Maffezzoli

  164. Viscoelastic and thermal characterization of crosslinked PVC

    Article • European Polymer Journal, April 2006, Elsevier

    Professor Alfonso Maffezzoli

  165. Temperature evolution during stereolithography building with a commercial epoxy resin

    Article • Polymer Engineering & Science, January 2006, Wiley

    Professor Alfonso Maffezzoli

  166. A cellulose-based hydrogel as a potential bulking agent for hypocaloric diets: Anin vitro biocompatibility study on rat intestine

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Alfonso Maffezzoli

  167. Preformed microspherical inclusions for rheological control and physical property modification of epoxy resins

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Alfonso Maffezzoli

  168. Development of polymeric foams from recycled polyethylene and recycled gypsum

    Article • Polymer Degradation and Stability, November 2005, Elsevier

    Professor Alfonso Maffezzoli

  169. Crosslinking of cellulose derivatives and hyaluronic acid with water-soluble carbodiimide

    Article • Polymer, November 2005, Elsevier

    Professor Alfonso Maffezzoli

  170. Time–temperature and time-irradiation intensity superposition for photopolymerization of an epoxy based resin

    Article • Polymer, September 2005, Elsevier

    Professor Alfonso Maffezzoli

  171. Silica moulds built by stereolithography

    Article • Journal of Materials Science, September 2005, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  172. Monitoring the drying process of lasagna pasta through a novel sensing device-based method

    Article • Journal of Food Engineering, July 2005, Elsevier

    Professor Alfonso Maffezzoli

  173. Laser stereolithography of ZrO2 toughened Al2O3

    Article • Journal of the European Ceramic Society, June 2005, Elsevier

    Professor Alfonso Maffezzoli

  174. Polymeric meshes for internal sutures with differentiated adhesion on the two sides

    Article • Journal of Materials Science Materials in Medicine, April 2005, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  175. Ultrasonic monitoring of the network formation in superabsorbent cellulose based hydrogels

    Article • Polymer, February 2005, Elsevier

    Professor Alfonso Maffezzoli

  176. The Retrogradation of Concentrated Wheat Starch Systems

    Article • Starch - Stärke, January 2005, Wiley

    Professor Alfonso Maffezzoli

  177. Relaxations during the postcure of unsaturated polyester networks by ultrasonic wave propagation, dynamic mechanical analysis, and dielectric analysis

    Article • Journal of Polymer Science Part B Polymer Physics, January 2005, Wiley

    Professor Alfonso Maffezzoli

  178. Simultaneous gravimetric and calorimetric analysis of chloroform sorption in nanoporous semicrystalline sPS

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Alfonso Maffezzoli

  179. Laser stereolithography of ZrO2 toughened Al2O3

    Article • Journal of the European Ceramic Society, December 2004, Elsevier

    Professor Alfonso Maffezzoli

  180. Porous Garnet Coatings Tailoring the Emissivity of Thermostructural Materials

    Article • Journal of Sol-Gel Science and Technology, December 2004, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  181. Kinetic Studies of Liquid Crystalline and Isotropic Vinyl Ester Resins

    Article • Macromolecular Chemistry and Physics, October 2004, Wiley

    Professor Alfonso Maffezzoli

  182. Cardanol based matrix biocomposites reinforced with natural fibres

    Article • Composites Science and Technology, May 2004, Elsevier

    Professor Alfonso Maffezzoli

  183. Phase transformations during the cure of unsaturated polyester resins

    Article • Materials Science and Engineering A, April 2004, Elsevier

    Professor Alfonso Maffezzoli

  184. Powder-shape analysis and sintering behavior of high-density polyethylene powders for rotational molding

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Alfonso Maffezzoli

  185. Processing-properties relationship of sandwich panels with polypropylene-core and polypropylene-matrix composite skins

    Article • Polymer Composites, January 2004, Wiley

    Professor Alfonso Maffezzoli

  186. Photopolymerization kinetics of an epoxy-based resin for stereolithography

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Alfonso Maffezzoli

  187. Cellulose Derivative−Hyaluronic Acid-Based Microporous Hydrogels Cross-Linked through Divinyl Sulfone (DVS) To Modulate Equilibrium Sorption Capacity and Network Stability

    Article • Biomacromolecules, January 2004, American Chemical Society (ACS)

    Professor Alfonso Maffezzoli

  188. Evaluation of the degree of cross-linking of cellulose-based superabsorbent hydrogels: a comparison between different techniques

    Article • Macromolecular Symposia, October 2003, Wiley

    Professor Alfonso Maffezzoli

  189. Introduction of molecular spacers between the crosslinks of a cellulose-based superabsorbent hydrogel: Effects on the equilibrium sorption properties

    Article • Journal of Applied Polymer Science, July 2003, Wiley

    Professor Alfonso Maffezzoli

  190. Statistical and kinetic approaches for linear low-density polyethylene melting modeling

    Article • Journal of Applied Polymer Science, April 2003, Wiley

    Professor Alfonso Maffezzoli

  191. The challenge of high-performance selective emitters for thermophotovoltaic applications

    Article • Semiconductor Science and Technology, April 2003, Institute of Physics Publishing

    Professor Alfonso Maffezzoli

  192. Erbium containing ceramic emitters for thermophotovoltaic energy conversion

    Article • Materials Science and Engineering B, March 2003, Elsevier

    Professor Alfonso Maffezzoli

  193. Simulation of heat transfer during rotational molding

    Article • Advances in Polymer Technology, January 2003, Wiley

    Professor Alfonso Maffezzoli

  194. Cure kinetics and properties of epoxy resins containing a phosphorous-based flame retardant

    Article • Advances in Polymer Technology, January 2003, Wiley

    Professor Alfonso Maffezzoli

  195. Article • Journal of Thermal Analysis and Calorimetry, January 2003, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  196. Article • Journal of Thermal Analysis and Calorimetry, January 2003, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  197. Article • Journal of Sol-Gel Science and Technology, January 2003, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  198. Network development during epoxy curing: experimental ultrasonic data and theoretical predictions

    Article • Macromolecular Symposia, March 2002, Wiley

    Professor Alfonso Maffezzoli

  199. Ceramic Components Built by Stereolithography

    Article • January 2002, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  200. Influence of crystal and amorphous phase morphology on hydrolytic degradation of PLLA subjected to different processing conditions

    Article • Polymer, April 2001, Elsevier

    Professor Alfonso Maffezzoli

  201. Correlation Between Ultrasonic and Static Mechanical Properties During Curing of Cold-Curing Epoxy Adhesives

    Article • Journal of Polymer Engineering, January 2001, De Gruyter

    Professor Alfonso Maffezzoli

  202. Effect of hydroxides and hydroxycarbonate structure on fire retardant effectiveness and mechanical properties in ethylene-vinyl acetate copolymer

    Article • Polymer Degradation and Stability, January 2001, Elsevier

    Professor Alfonso Maffezzoli

  203. Article • Journal of Materials Science Materials in Medicine, January 2001, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  204. Article • Journal of Materials Science, January 2001, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  205. Glass–rubber phase transformation detected in polymers by means of ultrasonic waves

    Article • Journal of Alloys and Compounds, September 2000, Elsevier

    Professor Alfonso Maffezzoli

  206. Nondestructive and in-situ monitoring of mechanical property buildup in epoxy adhesives for civil applications by propagation of ultrasonic waves

    Article • Polymer Engineering & Science, March 2000, Wiley

    Professor Alfonso Maffezzoli

  207. Article • Journal of Materials Science, January 2000, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  208. Article • January 2000, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  209. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation

    Article • Journal of Applied Polymer Science, September 1999, Wiley

    Professor Alfonso Maffezzoli

  210. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation

    Article • Journal of Applied Polymer Science, September 1999, Wiley

    Professor Alfonso Maffezzoli

  211. Ultrasonic characterization of the kinetics of water sorption in hydrogels

    Article • Macromolecular Symposia, March 1999, Wiley

    Professor Alfonso Maffezzoli

  212. Effect of irradiation intensity on the isothermal photopolymerization kinetics of acrylic resins for stereolithography

    Article • Thermochimica Acta, November 1998, Elsevier

    Professor Alfonso Maffezzoli

  213. Degradation behaviour of a composite material for thermal protection systemsPart II Process simulation

    Article • Journal of Materials Science, June 1998, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  214. Degradation behaviour of a composite material for thermal protection systems Part I–Experimental characterization

    Article • Journal of Materials Science, June 1998, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  215. Ultrasonic characterization of water sorption in poly(2-hydroxyethyl methacrylate) hydrogels

    Article • Journal of Applied Polymer Science, January 1998, Wiley

    Professor Alfonso Maffezzoli

  216. Determination of the crystallization enthalpy of new-TPI

    Article • Journal of Applied Polymer Science, January 1998, Wiley

    Professor Alfonso Maffezzoli

  217. Article • Journal of Materials Science Materials in Medicine, January 1997, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  218. A study of the water sorption kinetic of Poly(HEMA) hydrogels by SLAM and FT-IR measurements

    Article • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, September 1996, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  219. Polymerization kinetics of acrylic bone cements by differential scanning calorimetry

    Article • Journal of Thermal Analysis and Calorimetry, July 1996, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  220. Ultrasonic wave attenuation during water sorption in poly(2-hydroxyethyl methacrylate) hydrogels

    Article • Polymer Engineering & Science, July 1996, Wiley

    Professor Alfonso Maffezzoli

  221. Bulk Crystllization Kinetics of New TPI (Thermoplastic Poly Imide) by Differential Calorimetric Analysis

    Article • Materials Science Forum, February 1996, Trans Tech Publications

    Professor Alfonso Maffezzoli

  222. On the physical dimensions of the Avrami constant

    Article • Thermochimica Acta, December 1995, Elsevier

    Professor Alfonso Maffezzoli

  223. Thermal analysis of visible-light-activated dental composites

    Article • Thermochimica Acta, December 1995, Elsevier

    Professor Alfonso Maffezzoli

  224. A macrokinetic approach to crystallization applied to a new thermoplastic polyimide (New TPI) as a model polymer

    Article • Journal of Applied Polymer Science, May 1995, Wiley

    Professor Alfonso Maffezzoli

  225. Cure behaviour of visible light activated dental composites

    Article • Journal of Materials Science Materials in Medicine, March 1995, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  226. Cure behaviour of visible light activated dental composites

    Article • Journal of Materials Science Materials in Medicine, March 1995, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  227. Process Modelling of Thermoset Based Composites

    Article • Revue de l Institut Français du Pétrole, January 1995, EDP Sciences

    Professor Alfonso Maffezzoli

  228. Photopolymerization of dental composite matrices

    Article • Biomaterials, December 1994, Elsevier

    Professor Alfonso Maffezzoli

  229. Determination of the water absorption kinetics in hydrogels by SLAM

    Article • January 1994, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Alfonso Maffezzoli

  230. Correlation between dielectric and chemorheological properties during cure of epoxy-based composites

    Article • Journal of Materials Science, January 1994, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  231. A new kinetic model for polymer crystallization derived by calorimetric analysis

    Article • Thermochimica Acta, November 1993, Elsevier

    Professor Alfonso Maffezzoli

  232. The principles of dielectric measurements for in situ monitoring of composite processing

    Article • Composites Science and Technology, January 1993, Elsevier

    Professor Alfonso Maffezzoli

  233. Dielectric characterization of water sorption in epoxy resin matrices

    Article • Polymer Engineering & Science, January 1993, Wiley

    Professor Alfonso Maffezzoli

  234. A macrokinetic approach to crystallization modelling of semicrystalline thermoplastic matrices for advanced composites

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  235. Science and Technology of Polymer Composites

    Article • January 1993, Springer Science + Business Media

    Professor Alfonso Maffezzoli

  236. Modeling of the dynamic mechanical properties of semicrystalline thermoplastic matrix composites

    Article • Polymer Composites, October 1992, Wiley

    Professor Alfonso Maffezzoli

  237. Thermal analysis of thermoplastic matrices for advanced composite materials: poly(phenylene sulphide)

    Article • Thermochimica Acta, May 1992, Elsevier

    Professor Alfonso Maffezzoli

  238. Crystallization kinetics of poly(phenylene sulfide) (PPS) and PPS/carbon fiber composites

    Article • Polymer Engineering & Science, April 1991, Wiley

    Professor Alfonso Maffezzoli

  239. Mathematical modeling of the pultrusion of epoxy based composites

    Article • Advances in Polymer Technology, January 1990, Wiley

    Professor Alfonso Maffezzoli

  240. A model for the thermal and chemorheological behavior of thermoset processing: (II) Unsaturated polyester based composites

    Article • Composites Science and Technology, January 1990, Elsevier

    Professor Alfonso Maffezzoli