All Stories

  1. Antenna Measurement Challenges and Opportunities
  2. Near-Field Uniform Linear Array Calibration Based on the Extrapolation of Measured Complex Signals
  3. Statistical Analysis for Shielding Effectiveness Measurement of Materials Using Reverberation Chambers
  4. A New Evaluation Framework for the Performance of Spatial Correlation in MIMO OTA Testing
  5. A Novel Gain Reference Dipole Antenna for Accurate Calibration of Over-the-Air Measurement Systems
  6. A MIMO Antenna with High Gain and Enhanced Isolation for WLAN Applications
  7. Minimized Triple-Band Eight-Element Antenna Array for 5G Metal-frame Smartphone Applications
  8. A Low-Cost and Efficient Single Probe Based MIMO OTA Measurement Method
  9. An Empirical Study of the Stochastic Nature of Electromagnetic Field Exposure in Massive MIMO Systems
  10. Design and Optimization of Compact Printed Log-Periodic Dipole Array Antennas with Extended Low-Frequency Response
  11. Optimization of Log-Periodic TV Reception Antenna with UHF Mobile Communications Band Rejection
  12. Circular Polarized 3-D-Printed Dielectric Loaded Antenna Using Inset Waveguide-to-Dielectric Transition for 5G Millimeter-Wave Application
  13. Strong, omnidirectional radar backscatter from subwavelength, 3D printed metacubes
  14. Hybrid Beamforming With Switches and Phase Shifters Over Frequency-Selective Channels
  15. A printed LPDA antenna with improved low frequency response
  16. Virtual Sensing Directional Hub MAC (VSDH-MAC) Protocol with Power Control
  17. Empty Substrate-Integrated Waveguide-Fed Patch Antenna Array for 5G Millimeter-Wave Communication Systems
  18. An Assessment of the Radio Frequency Electromagnetic Field Exposure from A Massive MIMO 5G Testbed
  19. Developing the First mmWave Fully-Connected Hybrid Beamformer With a Large Antenna Array
  20. A Closed-Form Formula of Radiation and Total Efficiency for Lossy Multiport Antennas
  21. Approximate Analytical Equations for the Stirrer Angular Correlation in a Reverberation Chamber
  22. Guest Editorial: Metrology for 5G Technologies
  23. A Wideband Spiral UHF Coupler With Tuning Nodules for Partial Discharge Detection
  24. Experimental Investigation of Empty Substrate Integrated Waveguide-Fed MMW Patch Antenna for 5G Applications
  25. A Compact Minimally Invasive Antenna for OTA Testing
  26. Empty Substrate Integrated Waveguide Planar Slot Antenna Array for 5G Wireless Systems
  27. A novel design of a 10-dipole log-periodic antenna with LTE-800 and GSM-900 band rejection
  28. Accurate antenna gain estimation using the two-antenna method
  29. Characterisation of Doppler shift in Millimetre Wave Vehicular Channel
  30. The Noise Level of Total Scattering Cross Section Measurement in a Reverberation Chamber
  31. Understanding the Temporal Fading in Wireless Industrial Networks: Measurements and Analyses
  32. An investigation of millimeter wave reflectarrays for small satellite platforms
  33. Empty Substrate Integrated Waveguide Slot Antenna Array for 5G Applications
  34. An Evaluation of Distortion and Interference Sources Originating Within a Millimeter-Wave MIMO Testbed for 5G Communications
  35. Millimeter-Wave Over-the-Air Signal-to-Interference-plus-Noise-Ratio Measurements Using a MIMO Testbed
  36. A Ka‐band antenna based on an enhanced Franklin model for 5G cellular networks
  37. A rigorous link performance and measurement uncertainty assessment for MIMO OTA characterisation
  38. Efficient Uncertainty Evaluation of Vector Network Analyser Measurements Using Two-Tier Bayesian Analysis and Monte Carlo Method
  39. Empty Substrate Integrated Waveguide-Fed MMW Aperture-Coupled Patch Antenna for 5G Applications
  40. Prediction of SINR using BER and EVM for Massive MIMO Applications
  41. Single Layer PCB Broadband Circular Polarisation Millimetre Wave Massive MIMO Array
  42. Investigation of bandpass filters in the time domain signal analysis of reverberation chamber
  43. Routing and link performance assessment of a wireless sensor network in a reverberation chamber with different absorber loading conditions
  44. A millimeter wave MIMO testbed for 5G communications
  45. Evaluation of Chamber Effects on Antenna Efficiency Measurements Using Non-reference Antenna Methods in Two Reverberation Chambers
  46. The residual errors of multiport VNA measurements due to non-ideal TRM calibration
  47. An efficient algorithm for electrically large reflectarray antenna design automation
  48. How coarse is too coarse in electrically large reflectarray smart antennas?
  49. An electronically steerable parasitic array radiator antenna with adaptive beamforming ability
  50. The effect of receiving antenna orientation and polarization on measurements of antenna efficiency in a reverberation chamber
  51. A high gain steerable millimeter-wave antenna array for 5G smartphone applications
  52. Millimetre wave reflectarray antenna unit cell measurements
  53. Role of Surface Waves in the Reflection Properties of a Millimetre Wave Reflectarray Unit Cell
  54. Measurement of absorption cross section of a lossy object in reverberation chamber without the need for calibration
  55. A Simple Recursively Computable Lower Bound on the Noncoherent Capacity of Highly Underspread Fading Channels
  56. A software-defined-radio platform for multiple-input-multiple-output over-the-air measurement
  57. Compact Smart Antenna With Electronic Beam-Switching and Reconfigurable Polarizations
  58. A comparison of antenna efficiency measurements performed in two reverberation chambers using non-reference antenna methods
  59. A novel tunable high impedance surface electromagnetic band gap metamaterials for RF and microwave applications
  60. A comparison of MIMO antenna efficiency measurements performed in Anechoic Chamber and Reverberation Chamber
  61. Assessment of the adaptive routing performance of a Wireless Sensor Network using smart antennas
  62. Assessment of a low-profile planar antenna for a wireless sensor network monitoring the local water distribution network
  63. Experimental evaluation of wearable antenna efficiency for applications in body-centric wireless networks
  64. On the Analogy Between Vehicle and Vehicle-Like Cavities With Reverberation Chambers
  65. Radiation Pattern Measurement of a Low-Profile Wearable Antenna Using an Optical Fibre and a Solid Anthropomorphic Phantom
  66. Characterizing the Spectral Properties and Time Variation of the In-Vehicle Wireless Communication Channel
  67. An Impulse Response Model and $Q$ -Factor Estimation for Vehicle Cavities
  68. Non-invasive measurement of electrically small ultra-wideband and smart antennas
  69. A Cost-Effective Direct Magnitude Measurement Methodology for Smart Antennas
  70. Small Director Array for Low-Profile Smart Antennas Achieving Higher Gain
  71. Compact MIMO Antenna With Frequency Reconfigurability and Adaptive Radiation Patterns
  72. Low-cost beam-switching circularly-polarised antenna using tunable high impedance surface
  73. Radiation pattern characterisation of embedded radios emitting modulated signals
  74. Electrically Small and Low Cost Smart Antenna for Wireless Communication
  75. Low cost beam switchable reflectarray antenna
  76. Phantoms for antenna measurements at 2.4 GHz
  77. A Study on Frequency Diversity for Intra-Vehicular Wireless Sensor Networks (WSNs)
  78. Effects of antenna mount on a spherical scanning measurement of the radiation efficiency of a wire antenna
  79. Compact Dual-Band Antenna With Electronic Beam-Steering and Beamforming Capability
  80. Measurement of electrically small antennas via optical fibre
  81. Compact-size Electronically Steerable Parasitic Array Radiator antenna
  82. Small smart antenna composed of reconfigurable inverted F-type antenna
  83. New facility for minimally invasive measurements of electrically small antennas
  84. Indoor radiowave propagation for UWB wireless communication systems
  85. Comparison of electric field strength at VHF frequencies generated by dipoles and TEM cells
  86. Small antenna pattern testing - the antenna-to-range interface
  87. A Method to Minimize Emission Measurement Uncertainty of Electrically Large EUTs in GTEM Cells and FARs Above 1 GHz
  88. Antenna height scan for minimizing EUT emission measurement uncertainty in fully anechoic chambers above 1 GHz
  89. Implementation of an Exact Modal Absorbing Boundary Termination Condition for the Application of the Finite-Element Time-Domain Technique to Discontinuity Problems in Closed Homogeneous Waveguides
  90. Photonic bandgap surfaces with interdigitated corrugations