All Stories

  1. Bendable ZnO thin film surface acoustic wave devices on polyethylene terephthalate substrate
  2. Resistive switching of in situ and ex situ oxygen plasma treated ZnO thin film deposited by atomic layer deposition
  3. Label-free detection of human prostate-specific antigen (hPSA) using film bulk acoustic resonators (FBARs)
  4. Flexible Surface Acoustic Wave Based Temperature and Humidity Sensors
  5. Flexible surface acoustic wave devices and its applications in microfluidics
  6. Spectroscopic route to monitoring individual surfactant ions and micelles in aqueous solution: A case study
  7. Surface acoustic wave resonators based on (002)AlN/Pt/diamond/silicon layered structure
  8. Structural, optical, electrical and resistive switching properties of ZnO thin films deposited by thermal and plasma-enhanced atomic layer deposition
  9. A Single FBAR-Based Temperature and Pressure Sensors
  10. Direct comparison of the gravimetric responsivities of ZnO-based FBARs and SMRs
  11. On optical reflection at heterojunction interface of thin film solar cells
  12. High sensitivity humidity sensors using flexible surface acoustic wave devices made on nanocrystalline ZnO/polyimide substrates
  13. Ab initio study of electronic and optical behavior of two-dimensional silicon carbide
  14. Experimental comparison of FBARs and SMRs responsitivities to mass loadings
  15. Dual-mode thin film bulk acoustic wave resonators for parallel sensing of temperature and mass loading
  16. Ultra-violet light assisted reactive RF magnetron sputtering deposition of AlN thin films at room temperature
  17. Numerical study of metal oxide Schottky type solar cells
  18. Preparation of Electrodeposited Ni-CNTs Nanocomposite Coatings with Highly Wear and Corrosion Resistance Properties
  19. High Performance Shape Memory Polyurethane Synthesized with High Molecular Weight Polyol as the Soft Segment
  20. Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive direct-current magnetron sputtering
  21. Influence of Substrate Temperature on Structural Properties and Deposition Rate of AlN Thin Film Deposited by Reactive Magnetron Sputtering
  22. Protein functionalized ZnO thin film bulk acoustic resonator as an odorant biosensor
  23. Origin of significant visible-light absorption properties of Mn-doped TiO2 thin films
  24. Feasibility study of polyurethane shape-memory polymer actuators for pressure bandage application
  25. Quantum and thermo-mechanical noise squeezing in nanoresonators: A comparative study
  26. Ab initio study of energy-band modulation in graphene-based two-dimensional layered superlattices
  27. Smart microgrippers for bioMEMS applications
  28. Development of a high speed wideband frequency tunable infra-red laser source for real-time wind turbine array sensing applications
  29. AlN-based BAW resonators with CNT electrodes for gravimetric biosensing
  30. Stability and deterioration of a shape memory polymer fabric composite under thermomechanical stress
  31. Interfacial Immobilization of Monoclonal Antibody and Detection of Human Prostate-Specific Antigen
  32. Synthesis and Characterization of Polyurethane‐Based Shape‐Memory Polymers for Tailored Tg around Body Temperature for Medical Applications
  33. Generalised Butterworth-Van Dyke equivalent circuit for thin-film bulk acoustic resonator
  34. Film bulk acoustic resonator nanosensors for multi-task sensing
  35. Extracting intrinsic parameters of film bulk acoustic resonators with different sizes of pads
  36. Deposition and characterisation of ultralow-stress ZnO thin films for application in FBAR-based gravimetric biosensors
  37. Integrated ZnO Film Based Acoustic Wave Microfluidics and Biosensors
  38. Ultrafast sputtered ZnO thin films with high kT for acoustic wave device applications
  39. Self-Powered Medical Devices for Vibration Suppression
  40. Recent developments on ZnO films for acoustic wave based bio-sensing and microfluidic applications: a review
  41. ZnO Thin Film Surface Acoustic Wave based Lab-on-a-Chip
  42. Thin film shape memory alloys and microactuators
  43. Nanomechanical characterisation of MEMS thin film materials
  44. Nanocrystalline ZnO Film Layer on Silicon and its Application to Surface Acoustic Wave-Based Streaming
  45. Characterisation of tribological behaviour of silicon and ceramic coatings under repeated sliding at micro-scale
  46. Deposition and characterization of sputtered ZnO films
  47. SAW Streaming in ZnO Surface Acoustic Wave Micromixer and Micropump
  48. Modelling and fabrication of low operation temperature microcages with a polymer/metal/DLC trilayer structure
  49. MEMS based digital variable capacitors with a high-k dielectric insulator
  50. Normally Closed Microgrippers Based on Diamond Like Carbon Structures
  51. Normally Closed Microgrippers Based on Diamond Like Carbon Structures
  52. On the lower thickness boundary of sputtered TiNi films for shape memory application
  53. Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system
  54. Laser micromachining of sputtered DLC films
  55. Residual stress in amorphous and nanocrystalline Si films prepared by PECVD with hydrogen dilution
  56. Development of all metal electrothermal actuator and its applications
  57. Micromirror structure based on TiNi shape memory thin films
  58. Biopsy applications of Ti50Ni41Cu9 shape memory films for wireless capsule endoscope
  59. Development of an all-metal electrothermal actuator and its applications
  60. Microgripper using a diamond like carbon/metal bilayer
  61. Micro-mechanical characterisation for MEMS thin films by bending μ-machined cantilevers
  62. The characteristics of intimate AuInyAl1 − yAs Schottky diodes: a mismatch dependence study
  63. Effect of plasma pre-treatment on Au/p-InP schottky diodes
  64. Deep levels in MOCVD AI0.48In0.52As/InP
  65. Carrier concentration in selectively doped n-AlGaAs/GaAs single heterojunctions
  66. Admittance spectroscopy of electron irradiated p-type indium phosphide
  67. Effect of growth condition on electrical properties of MBE and MOCVD-AlInAs
  68. Electrical characterization of 1 MeV electron irradiated ITO/InP structures
  69. Annealing of irradiation damage in epitaxial InP homojunction solar cells
  70. Improvement of the breakdown voltage of GaAs-FETs using low-temperature-grown GaAs insulator
  71. The effect of thermal treatment on the electrical properties of MBE-AlInAs
  72. Comparison of RF diode and magnetron sputtering for the fabrication of ITO/InP solar cells