All Stories

  1. Failure investigation of an underground low voltage XLPE insulated cable

    Article • Anti-Corrosion Methods and Materials, September 2015, Emerald

    Dr Anwar Ul-Hamid

  2. Cyclic oxidation behaviour of plasma sprayed metallic coatings

    Article • Materials at High Temperatures, April 2015, Taylor & Francis

    Dr Anwar Ul-Hamid, Mr Abdul Quddus

  3. Corrosion Behavior of Coarse- and Fine-Grain Ni Coatings Incorporating NaH2PO4.H2O Inhibitor Treated Substrates

    Article • Materials Research, February 2015, FapUNIFESP (SciELO)

    Dr Anwar Ul-Hamid, Mr Abdul Quddus

  4. Premature failure of tubing used in sweet Extra Arab Light grade crude oil production well

    Article • Engineering Failure Analysis, January 2015, Elsevier

    Dr Anwar Ul-Hamid

  5. Carburization behavior of high velocity oxy fuel sprayed metallic coatings at 900°C

    Article • Anti-Corrosion Methods and Materials, October 2014, Emerald

    Dr Anwar Ul-Hamid, Mr Abdul Quddus

  6. Silica-supported (n BuCp)2 ZrCl2 : effect of catalyst active center distribution on ethylene-1-hexene copolymerization

    Article • Polymer International, August 2013, Wiley

    Professor Muhammad Atiqullah, Dr Anwar Ul-Hamid

  7. Effects of Supported (nBuCp)2ZrCl2Catalyst Active-Center Distribution on Ethylene–1-Hexene Copolymer Backbone Heterogeneity and Thermal Behaviors

    Article • Industrial & Engineering Chemistry Research, July 2013, American Chemical Society (ACS)

    Dr Anwar Ul-Hamid

  8. Rheology and enhancement of extrusion of linear and branched polyethylenes using low amount of organoclay

    Article • Journal of Applied Polymer Science, April 2012, Wiley

    Dr Anwar Ul-Hamid

  9. Corrosion behaviour of cast iron exposed to Arabian Gulf environment

    Article • Anti-Corrosion Methods and Materials, November 2011, Emerald

    Dr Anwar Ul-Hamid

  10. Chemical modification of waste oil fly ash for improved mechanical and thermal properties of low density polyethylene composites

    Article • Journal of Polymer Research, July 2011, Springer Science + Business Media

    Dr Anwar Ul-Hamid

  11. Bulk and surface mechanical properties of clay modified HDPE used in liner applications

    Article • The Canadian Journal of Chemical Engineering, July 2011, Wiley

    Mr Jimoh K. Adewole, Dr Anwar Ul-Hamid

  12. Effect of chemical modification of oil fly ash and compatibilization on the rheological and morphological properties of low-density polyethylene composites

    Article • Journal of Applied Polymer Science, June 2011, Wiley

    Dr Anwar Ul-Hamid

  13. Effect of aspect ratio, surface modification and compatibilizer on the mechanical and thermal properties of ldpe-mwcnt nanocomposites

    Article • e-Polymers, January 2011, De Gruyter

    Dr Anwar Ul-Hamid

  14. Prevention of failure in a distillation unit exhibiting extensive scale formation

    Article • Desalination, September 2010, Elsevier

    Dr Anwar Ul-Hamid

  15. Corrosion of carbon steel caustic header in the presence of chloride ions

    Article • Engineering Failure Analysis, April 2009, Elsevier

    Dr Anwar Ul-Hamid

  16. Corrosion of industrial furnace tubes in a chlorine contaminated environment

    Article • Materials at High Temperatures, June 2008, Taylor & Francis

    Dr Anwar Ul-Hamid

  17. Corrosion of industrial furnace tubes in a chlorine contaminated environment

    Article • Materials at High Temperatures, January 2008, Maney Publishing

    Dr Anwar Ul-Hamid

  18. Evaluation of Silicone Rubber Insulators used in High-Voltage Transmission Lines

    Article • Journal of Materials Engineering and Performance, July 2007, Springer Science + Business Media

    Dr Anwar Ul-Hamid

  19. Use of X-ray powder diffraction for quantitative analysis of carbonate rock reservoir samples

    Article • Powder Technology, June 2007, Elsevier

    Dr Anwar Ul-Hamid

  20. Failure Analysis Of A Lube Oil Carbon Steel Pipe

    Article • Materials Technology, December 2006, Taylor & Francis

    Dr Anwar Ul-Hamid

  21. Failure analysis of furnace radiant tubes exposed to excessive temperature

    Article • Engineering Failure Analysis, September 2006, Elsevier

    Dr Anwar Ul-Hamid

  22. Quantitative WDS analysis using electron probe microanalyzer

    Article • Materials Characterization, April 2006, Elsevier

    Dr Anwar Ul-Hamid

  23. Failure of weld joints between carbon steel pipe and 304 stainless steel elbows

    Article • Engineering Failure Analysis, April 2005, Elsevier

    Dr Anwar Ul-Hamid

  24. Practical Engineering Failure Analysis

    Article • August 2004

    Dr Anwar Ul-Hamid

  25. A TEM study of the oxide scale development in Ni‐Cr alloys

    Article • Anti-Corrosion Methods and Materials, June 2004, Emerald

    Dr Anwar Ul-Hamid

  26. A TEM study of the oxide scale development in Ni–Cr–Al alloys

    Article • Corrosion Science, January 2004, Elsevier

    Dr Anwar Ul-Hamid

  27. Diverse scaling behavior of the Ni–20Cr alloy

    Article • Materials Chemistry and Physics, April 2003, Elsevier

    Dr Anwar Ul-Hamid

  28. Effect of Y2O3 Content on the Oxidation Behavior of Fe-Cr-Al-Based ODS Alloys

    Article • Journal of Materials Engineering and Performance, February 2003, Springer Science + Business Media

    Dr Anwar Ul-Hamid

  29. The corrosion behavior of scandium alloyed Al 5052 in neutral sodium chloride solution

    Article • Corrosion Science, July 2001, Elsevier

    Dr Anwar Ul-Hamid