All Stories

  1. Pulsed electromagnetic field coupling to a transmission line with arbitrary loads—A unified methodology based on reciprocity
  2. Accelerated Evaluation of Quasi-Static Interaction Integrals via Cubic Spline Interpolation in the Framework of the PEEC Method
  3. Editorial Introduction to the Special Issue on Advances of Computational Electromagnetics for EMC
  4. A Rigorous Explicit Expression for the Mutual Inductance of Two Co-Axial Thin-Wire Coil Antennas Placed above a Layered Ground
  5. Efficient PEEC Iterative Solver for Power Electronic Applications
  6. A Comparative Analysis of Numerical Inverse Laplace Transform Methods for Electromagnetic Transient Analysis
  7. Optimized Analytical Computation of Partial Elements Using a Retarded Taylor Series Expansion
  8. Pulsed Electromagnetic Plane-Wave Interaction With a Time-Varying, Thin High-Dielectric Layer
  9. Pulsed Wave Propagation Along a Transmission Line With Time-Varying Wavespeed
  10. Transient Electromagnetic Plane Wave Scattering by a Time-Varying Metasurface: A Time-Domain Approach Based on Reciprocity
  11. The Partial Elements Equivalent Circuit Method: The State of the Art
  12. Mutual Coupling Aware Time-Domain Characterization and Performance Analysis of Reconfigurable Intelligent Surfaces
  13. Anisotropic and Optimized FFT-Based Iterative Electromagnetic Solver for the PEEC Method
  14. Pulsed Electromagnetic Excitation of a Thin Wire – an Approximate Numerical Model Based on the Cagniard-DeHoop Method of Moments
  15. Efficient Frequency and Time-domain Simulations of Delayed PEEC Models with Proper Orthogonal Decomposition Techniques
  16. Matrix-Free Transfer Function Prediction Using Model Reduction and Machine Learning
  17. Modified Numerical Inversion of Laplace Transform Methods for the Time-Domain Analysis of Retarded Partial Elements Equivalent Circuit Models
  18. Model Order Reduction for Delayed PEEC Models With Guaranteed Accuracy and Observed Stability
  19. Evaluation of Convolution Integrals at Late-Times Revisited
  20. Partial element equivalent circuit method in time-domain
  21. Efficient Partial Elements Computation for the Non-Orthogonal PEEC Method Including Conductive, Dielectrics, and Magnetic Materials
  22. Computational Electromagnetics for Industrial Applications
  23. Time-Domain Analysis of Thin-Wire Structures Based on the Cagniard-DeHoop Method of Moments
  24. Cagniard–DeHoop technique-based computation of retarded zero-thickness partial elements
  25. Loop Impedance of Single-Turn Circular Coils Lying on Conducting Media
  26. A Reduced Order Modelling Approach for Full-Maxwell Lightning Strike Analyses in Layered Backgrounds
  27. On the rectangular mesh and the decomposition of a Green’s-function-based quadruple integral into elementary integrals
  28. Pulsed Electromagnetic Excitation of a Narrow Slot Between Two Dielectric Halfspaces
  29. Time-Domain Computation of Full-Wave Partial Inductances Based on the Modified Numerical Inversion of Laplace Transform Method
  30. About the Use of Generalized Forms of Derivatives in the Study of Electromagnetic Problems
  31. Accurate Computation of Mutual Inductance of Non Coaxial Pancake Coils
  32. Efficient Computation of Partial Elements in the Full-Wave Surface-PEEC Method
  33. Pulsed Electromagnetic Field Signal Transfer Across a Thin Magneto-Dielectric Sheet
  34. Frequency domain behavior of S ‐parameters piecewise‐linear fitting in a digital‐wave framework
  35. Time-Domain Analysis of Retarded Partial Element Equivalent Circuit Models Using Numerical Inversion of Laplace Transform
  36. Broadband Circuit-Oriented Electromagnetic Modeling for Power Electronics: 3-D PEEC Solver vs. RLCG-Solver
  37. Transient Close-Range Electromagnetic Field Coupling Between Loop Antennas at the Interface of Dissipative Half-Spaces
  38. Accurate Calculation of Partial Inductances for the Orthogonal PEEC Formulation
  39. A Partial Element Equivalent Circuit-metamodel combination for fast tolerance analysis of electromagnetic systems
  40. A Partial Element Equivalent Circuit-metamodel combination for fast tolerance analysis of electromagnetic systems
  41. Electromagnetic Field Coupling Between a Horizontal Loop Antenna and a Transmission Line: An Analytical Time-Domain Model
  42. Full-Wave Computation of the Electric Field in the Partial Element Equivalent Circuit Method Using Taylor Series Expansion of the Retarded Green’s Function
  43. Parameterized Model Order Reduction of Delayed PEEC Circuits
  44. Rigorous dc Solution of Partial Element Equivalent Circuit Models Including Conductive, Dielectric, and Magnetic Materials
  45. Bandlimited Distortionless Material Design by an Approximation of the Heaviside Condition
  46. Electromagnetic Field Coupling to a Transmission Line—A Reciprocity-Based Approach
  47. Magnetic Coupling Between Coplanar Filamentary Coil Antennas With Uniform Current
  48. Pulsed EM Field Transfer Between a Horizontal Electric Dipole and a Transmission Line—A Closed-Form Model Based on the Cagniard–de Hoop Technique
  49. Efficient Numerical Computation of Full-Wave Partial Elements Modeling Magnetic Materials in the PEEC Method
  50. On the Flux Linkage between Pancake Coils in Resonance-Type Wireless Power Transfer Systems
  51. Lightning-Induced Voltages on Transmission Lines Over a Lossy Ground—An Analytical Coupling Model Based on the Cooray–Rubinstein Formula
  52. Time-Domain Electromagnetic-Field Transmission Between Small-Loop Antennas on a Half-Space With Conductive and Dielectric Properties
  53. Automated Framework for Time-Domain Piecewise-Linear Fitting Method Based on Digital Wave Processing of $S$ -Parameters
  54. Cagniard-DeHoop Technique-Based Computation of Retarded Partial Coefficients: The Coplanar Case
  55. Analytical Formulas for the Computation of the Electric Field in the Partial Element Equivalent Circuit Method With Conductive, Dielectric, and Magnetic Media
  56. Partial Element Equivalent Circuit Formulation for Moving Objects
  57. Time-Domain Sensitivity Analysis of Delayed Partial Element Equivalent Circuits
  58. An effective time-domain approach for the assessment of the stability characteristicsand other nonlinear effects of RF and microwave circuits
  59. Circuit synthesis techniques of rational models of electromagnetic systems: A tutorial paper
  60. Mutual Impedance of Thin-Wire Circular Loops in Near-Surface Applications
  61. On the passivity of the quasi-static partial element equivalent circuit method
  62. On the Inductive Coupling Between Two Parallel Thin-Wire Circular Loop Antennas
  63. Analytical Formula for the Magnetic-to-Electric Field Coupling of Magnetization in the Partial Element Equivalent Circuit Method
  64. Marching-on-in-Time Solution of Delayed PEEC Models of Conductive and Dielectric Objects
  65. A Simulink Implementation of the Delay-Rational Green's-Function-Based Method for Multiconductor Transmission Lines
  66. PEEC Models of Printed Antennas in Condition Monitoring Applications Covered by Dielectrics with Temperature-Dependent Permittivity
  67. Fast and Versatile Inverse Hysteresis Model in Quasi-Static Regime: Derivation and Implementation in Simulink and PEEC Frameworks
  68. Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal
  69. Partial Element Equivalent Circuit Models of Three-Dimensional Geometries Including Anisotropic Dielectrics
  70. A delay-rational model of electromagnetic interference on multiconductor transmission lines
  71. Analytical Evaluation of Partial Elements Using a Retarded Taylor Series Expansion of the Green’s Function
  72. A more accurate electromagnetic modeling of WBG power modules
  73. On the Distortionless Propagation in Multiconductor Transmission Lines
  74. Acceleration of the partial element equivalent circuit method with uniform tessellation-Part II: Frequency domain solver with interpolation and reuse of partial elements
  75. Acceleration of the partial element equivalent circuit method with uniform tessellation-part I: Identification of geometrical signatures
  76. Partial Element Equivalent Circuit Method Modeling of Silicon Interconnects
  77. Analytical evaluation of partial inductances with retardation
  78. Circuit Oriented Electromagnetic Modeling Using the Peec Techniques
  79. Electrothermal formulation of the partial element equivalent circuit method
  80. Machine-Learning Approach for Design of Nanomagnetic-Based Antennas
  81. Digital Wave Simulation of Quasi-Static Partial Element Equivalent Circuit Method
  82. Stochastic collocation for uncertainty quantification of systems described by neutral delayed differential equations
  83. Quasi-Static Partial Element Equivalent Circuit Models of Magneto-Dielectric Materials
  84. Polynomial Chaos-Based Macromodeling of General Linear Multiport Systems for Time-Domain Analysis
  85. Accurate and Efficient Low-Frequency Solution of Partial Element Equivalent Circuit Models
  86. ON THE RADIATION FROM A SHORT CURRENT-CARRYING STRAIGHT WIRE ORIENTED PERPENDICULAR TO A STRATIFIED MEDIUM
  87. A New Approach for Magneto-Static Hysteresis Behavioral Modeling
  88. Time-Domain Partial Element Equivalent Circuit Solver Including Non-Linear Magnetic Materials
  89. Rigorous DC Solution of Partial Element Equivalent Circuit Models
  90. A SPICE Realization of the Delay-Rational Green's-Function-Based Method for Multiconductor Transmission Lines
  91. Metamodelling technique for the efficient design optimisation of metasurfaces
  92. A descriptor form implementation of PEEC models incorporating dispersive and lossy dielectrics
  93. Global adjoint sensitivity analysis of coupled coils using parameterized model order reduction
  94. Partial Element Equivalent Circuit-Based Transient Analysis of Graphene-Based Interconnects
  95. Digital Wave formulation of quasi-static Partial Element Equivalent Circuit method
  96. Augmented Quasi-Static Partial Element Equivalent Circuit Models for Transient Analysis of Lossy and Dispersive Magnetic Materials
  97. Macromodeling of general linear systems under stochastic variations
  98. Delayed-rational Green's-function-based method of transmission lines and the Heaviside condition
  99. A Delay-Rational Model of Lossy Multiconductor Transmission Lines With Frequency-Independent Per-Unit-Length Parameters
  100. A Surface PEEC Formulation for High-Fidelity Analysis of the Current Return Networks in Composite Aircrafts
  101. Enabling antenna design with nano-magnetic materials using machine learning
  102. Enhanced delay-rational Green's method for cable time domain analysis
  103. Delay-rational model of lossy and dispersive multiconductor transmission lines
  104. Time-domain partial element equivalent circuit solver including non-linear magnetic materials
  105. Accurate modeling of buck converters with magnetic-core inductors
  106. Stochastic macromodeling for hierarchical uncertainty quantification of nonlinear electronic systems
  107. Quasi-Static Partial Element Equivalent Circuit Models of Linear Magnetic Materials
  108. The papers presents the use of the ACA algorithm to accelerate the transient analysis of PEEC models
  109. Rational macromodeling of 1D blood flow in the human cardiovascular system
  110. Polynomial chaos-based macromodeling of multiport systems using an input-output approach
  111. Parametric Macromodels for Efficient Design of Carbon Nanotube Interconnects
  112. A Fast Sparse Reluctance- and Capacitance-Based Solver for the Partial Element Equivalent Circuit Method
  113. A vectorized multiscale compressed decomposition-based solver for partial element equivalent circuit method
  114. Delayed impedance models of two-conductor transmission lines
  115. Partitioned Model Order Reduction of Partial Element Equivalent Circuit Models
  116. Broadband full-wave frequency domain PEEC solver using effective scaling and preconditioning for SIPI models
  117. Acceleration of Time-Domain Nodal-Analysis of Partial Element Equivalent Circuits Through Multiscale Compressed Decomposition
  118. An Accurate Interpolation Strategy for Fast Frequency Sweep of Partial Element Equivalent Circuit Models
  119. Efficient Variability Analysis of Electromagnetic Systems Via Polynomial Chaos and Model Order Reduction
  120. Non intrusive Polynomial Chaos-based stochastic macromodeling of multiport systems
  121. Efficient Frequency-Domain Analysis of PEEC Circuits Through Multiscale Compressed Decomposition
  122. A parallel, adaptive multi-point model order reduction algorithm
  123. Tests for time domain EM solvers for stability and towards passivity
  124. Passivization of EM PEEC solutions in the frequency and time domain
  125. Multiscale decomposition based analysis of PEEC models
  126. Full-wave modeling of inductive coupling links for low-power 3D system integration
  127. A surface PEEC formulation for the analysis of electrical networks in airplanes
  128. Review of Clayton R. Paul Studies on Multiconductor Transmission Lines
  129. Partial and Internal Inductance: Two of Clayton R. Paul’s Many Passions
  130. Skin-Effect Loss Models for Time- and Frequency-Domain PEEC Solver
  131. Skin-effect model for round wires in PEEC
  132. Partial Element Equivalent Circuit models in the solution of the electric field integral equation
  133. Time-Domain Green's Function-Based Parametric Sensitivity Analysis of Multiconductor Transmission Lines
  134. EM simulation of planar bus bars in multi-level power converters
  135. Polynomial chaos based variability analysis of multiport systems
  136. Speed-up of PEEC EM/Ckt solver using rank-reduced waveform relaxation
  137. Variability Analysis of Multiport Systems Via Polynomial-Chaos Expansion
  138. Parameterized model order reduction of delayed systems using an interpolation approach with amplitude and frequency scaling coefficients
  139. Spectral Models of Lossy Nonuniform Multiconductor Transmission Lines
  140. Interpolation-Based Parameterized Model Order Reduction of Delayed Systems
  141. Parametric macromodeling forS-parameter data based on internal nonexpansivity
  142. Parameterized Partial Element Equivalent Circuit Method for Sensitivity Analysis of Multiport Systems
  143. Scalable compact models for fast design optimization of complex electromagnetic systems
  144. Compact and Accurate Models of Large Single-Wall Carbon-Nanotube Interconnects
  145. Multipoint Full-Wave Model Order Reduction for Delayed PEEC Models With Large Delays
  146. Mixed integral-differential skin-effect models for PEEC electromagnetic solver
  147. Parameterized sensitivity analysis of multiport systems by means of the partial element equivalent circuit method and interpolation schemes
  148. Skin-effect model for time and frequency domain PEEC solver
  149. Multipoint model order reduction of delayed PEEC systems
  150. Efficient design optimization of complex electromagnetic systems using parametric macromodeling techniques
  151. Parametric macromodeling based on amplitude and frequency scaled systems with guaranteed passivity
  152. Reduced order modeling of delayed PEEC circuits
  153. Time-domain parametric sensitivity analysis of multiconductor transmission lines
  154. Physics-Based Passivity-Preserving Parameterized Model Order Reduction for PEEC Circuit Analysis
  155. Passivity-preserving interpolation-based parameterized model order reduction of PEEC models based on scattered grids
  156. Passivity-Preserving Parametric Macromodeling for Highly Dynamic Tabulated Data Based on Lur'e Equations
  157. Waveform Relaxation Time Domain Solver for Subsystem Arrays
  158. Guaranteed Passive Parameterized Model Order Reduction of the Partial Element Equivalent Circuit (PEEC) Method
  159. Parametric Macromodeling for Tabulated Data Based on Internal Passivity
  160. Spectral Models for the Estimation of Delay and Crosstalk in High-Speed Interconnects
  161. Block Analysis of a Voltage Supply Chain: Mixed Electromagnetic Modeling and Validation
  162. Spectral models for 1D blood flow simulations
  163. Measurement of differential mode propagation in printed circuit board for satellites applications
  164. Parameterized model order reduction with guaranteed passivity for PEEC Circuit analysis
  165. Power-Bus Sensitivity Analysis
  166. Parametric Macromodeling of Lossy and Dispersive Multiconductor Transmission Lines
  167. Advanced Models for Signal Integrity and Electromagnetic Compatibility-Oriented Analysis of Nanointerconnects
  168. A GENERAL FRAMEWORK FOR THE ANALYSIS OF METAMATERIAL TRANSMISSION LINES
  169. PLANAR TRANSMISSION LINE METHOD FOR CHARACTERIZATION OF PRINTED CIRCUIT BOARD DIELECTRICS
  170. Hybrid Formulation of the Equation Systems of the 3-D PEEC Model Based on Graph Algorithms
  171. Passivity-preserving parameterized model order reduction for PEEC based full wave analysis
  172. Parameterized models for crosstalk analysis in high-speed interconnects
  173. Corrections to “A Spectral Formulation for the Transient Analysis of Plane-Wave Coupling to Multiconductor Transmission Lines” [Aug 09 792-804]
  174. A Spectral Formulation for the Transient Analysis of Plane-Wave Coupling to Multiconductor Transmission Lines
  175. Time-Domain Green's Function-Based Sensitivity Analysis of Multiconductor Transmission Lines With Nonlinear Terminations
  176. A spectral method for transient analysis of lossy and dispersive anisotropic planar layers
  177. Fundamental mechanisms of coupling between planar electromagnetic bandgap structures and interconnects in high-speed digital circuits. Part I - microstrip lines
  178. Parameterized macromodels of multiconductor transmission lines
  179. Input-to-State Stability Analysis of Partial-Element Equivalent-Circuit Models
  180. Shielding effectiveness for a three-phase transformer at various harmonic frequencies
  181. A Spectral Approach to Frequency-Domain Sensitivity Analysis of Multiconductor Transmission Lines
  182. Transient Analysis of Nano-Interconnects
  183. Efficient power-bus modeling based on an adaptive frequency sampling technique
  184. Advanced models for transient analysis of lossy and dispersive anisotropic planar layers
  185. Design of a Test Vehicle for Nanowire Characterization for Signal Integrity Applications
  186. Different Strategies for Circuit Characterization of Power Delivery Networks
  187. Experimantal characterization and equivalent circuit extraction of nanowires for signal integrity applications
  188. PEEC Modeling of Dispersive and Lossy Dielectrics
  189. A Green's function-based method for the transient analysis of plane waves obliquely incident on lossy and dispersive planar layers
  190. A new frequency domain waveform relaxation algorithm for PEEC models
  191. A mixed nodal-mesh formulation of the PEEC method based on efficient graph algorithms
  192. Reconstruction of Dispersive Dielectric Properties for PCB Substrates Using a Genetic Algorithm
  193. Comparing full lateral metallization and reference plane stitching in LTCC boards for satellite applications
  194. Introduction to the partial element equivalent circuit (PEEC) technique (MO-AM-1-2)
  195. Progress in the development of a 2D Feature Selective Validation (FSV) method
  196. High speed serial links characterization for ATCA backplanes
  197. Protection of radar systems against nearby or direct lightning strokes
  198. A Dyadic Green's Function Based Method for the Transient Analysis of Lossy and Dispersive Multiconductor Transmission Lines
  199. A Low-Frequency Accurate Cavity Model for Transient Analysis of Power-Ground Structures
  200. Broadband Rational Macromodeling Based on the Adaptive Frequency Sampling Algorithm and the Partial Element Equivalent Circuit Method
  201. Integral equation-based approach for the analysis of tapered transmission lines
  202. Parallel Waveform Relaxation and Matrix Solution for Large PEEC Model Problems
  203. Time Domain Modeling of Lossy and Dispersive Thin Layers
  204. A Green's function-based method for the transient analysis of transmission lines
  205. Induced currents due to nearby lightning strike to a mobile radar system: an hybrid 3D/circuit analysis
  206. LADDER-NETWORK-BASED MODEL FOR INTERCONNECTS AND TRANSMISSION LINES TIME DELAY AND CUTOFF FREQUENCY DETERMINATION
  207. An Improved Cavity Model for the Analysis of the Voltage Bounce in Power-Bus Structures
  208. Analysis of Radiated Emissions and Shielding Effectiveness for a Metallic Enclosure with Shielding Springs
  209. PEEC capacitance extraction of 3-D interconnects
  210. Reduced Order Modeling for Transient Analysis of Carbon Nanotubes Interconnects
  211. Waveform Relaxation for the Parallel Solution of Large PEEC Model Problems
  212. Evaluation of the propagation constants of differential PCB interconnections
  213. Fast calculation of PEEC macromodels using frequency derivatives
  214. Innovative method for modelling tree structured interconnects
  215. Broadband Macromodels for Retarded Partial Element Equivalent Circuit (rPEEC) Method
  216. Systematic analysis of electromagnetic emissions and susceptibility in BPL system
  217. Extraction of Dispersive Material Parameters Using Vector Network Analyzers and Genetic Algorithms
  218. Equivalent Circuit Model of a Bundle of Cables for Bulk Current Injection (BCI) Test
  219. Feature Selective Validation (FSV) for Validation of Computational Electromagnetics (CEM). Part I—The FSV Method
  220. Feature Selective Validation (FSV) for Validation of Computational Electromagnetics (CEM). Part II— Assessment of FSV Performance
  221. A convergence analysis of iterative macromodeling methods using Whitfield's estimator
  222. Modeling of the IC's switching currents on the power bus of a high speed digital board
  223. Extraction of Dispersive Material Parameters Using Vector Network Analyzers and Genetic Algorithms
  224. Ladder-network-based model for delay determination in coupled interconnects
  225. Efficient Transient Analysis of Long Lossy Shielded Cables
  226. Impact of Partial Element Accuracy on PEEC Model Stability
  227. A comparative study of vector fitting and orthonormal vector fitting techniques for EMC applications
  228. Crosstalk and delay time analysis of high density interconnects on LTCC substrate
  229. Electromagnetic interferences on implantable medical devices onboard of high speed trains
  230. Enhancing feature selective validation (FSV) interpretation of EMC/SI results with grade-spread
  231. NEUTRAL DELAY DIFFERENTIAL EQUATIONS FROM THE PEEC CIRCUIT SOLUTION OF MAXWELL'S EQUATION
  232. PEEC modeling of linear magnetic materials
  233. Toward improved time domain stability and passivity for full-wave PEEC models
  234. Wide-Band Lorentzian Media in the FDTD Algorithm
  235. A New Approach for Closed-Form Transient Analysis of Multiconductor Transmission Lines
  236. De-Embedding Procedure Based on Computed/Measured Data Set for PCB Structures Characterization
  237. Implementation of a high energy 4ω probe beam on the Omega laser
  238. Transmitted laser beam diagnostic at the Omega laser facility
  239. A New Methodology for the Transient Analysis of Lossy and Dispersive Multiconductor Transmission Lines
  240. Compact transmission line representation
  241. Grounding, Unbalancing and Length Effects on Termination Voltages of a Twinax Cable During Bulk Current Injection
  242. Spice Equivalent Circuit of a Two-Parallel-Wires Shielded Cable for Evaluation of the RF Induced Voltages at the Terminations
  243. Fast multipole and multifunction peec methods
  244. Fast multipole method for time domain peec analysis
  245. Spice equivalent circuits of frequency-domain responses
  246. Nonorthogonal PEEC formulation for time- and frequency-domain EM and circuit modeling
  247. Shielding effects of reinforced concrete structures to electromagnetic fields due to GSM and UMTS systems
  248. S-parameters characterization of through, blind, and buried via holes
  249. Including dispersive dielectrics in PEEC models
  250. Equivalent network synthesis for via holes discontinuities
  251. Eye pattern evaluation in high-speed digital systems analysis by using MTL modeling
  252. Analytical integration of quasi-static potential integrals on nonorthogonal coplanar quadrilaterals for the PEEC method
  253. Constrained decision planning applied to field profile optimization in LPS of structures directly struck by lightning
  254. Full wave analysis of power electronic systems through a PEEC state variables method
  255. Comments on "Internal impedance of conductors of rectangular cross section" [and author's reply]
  256. Wavelet packet-based EMI signal processing and source identification
  257. Gradient evaluation for neural-networks-based electromagnetic optimization procedures
  258. Lightning-induced effects on lossy MTL terminated on arbitrary loads: a wavelet approach
  259. A wavelet-based time-domain solution for PEEC circuits
  260. Internal impedance of conductors of rectangular cross section
  261. power electronics converter, EMI
  262. A prediction model for electromagnetic interferences radiated by an industrial power drive system
  263. PEEC modeling of lightning protection systems and coupling to coaxial cables
  264. A SPICE model for near-field transient analysis of ferromagnetic grids
  265. EMC characterization of SMPS devices: circuit and radiated emissions model
  266. PHONON BROADENING OF IMPURITY SPECTRAL LINES: II. APPLICATION TO SILICON
  267. Genetic optimization of charge-pump PLL parameters
  268. The fast multipole method for PEEC circuits analysis
  269. Applications of FSV to EMC and SI data
  270. The feature selective validation (FSV) method
  271. A ladder network delay model for coupled interconnects
  272. Causality check for SI data validation
  273. Cross-SSN analysis in multilayer printed circuit boards
  274. De-embedding methods for characterizing PCB interconnections
  275. Ladder network modeling for closed-form interconnect time delay determination
  276. Reduced unknowns meshing for the partial element equivalent circuit approach
  277. Validation of circuit extraction procedure by means of frequency and time domain measurement
  278. Characterization of via holes on printed circuit boards
  279. Comparison of via equivalent circuit model accuracy using quasi-static and full-wave approaches
  280. Experimental validation of circuit models for bulk current injection (BCI) test on shielded coaxial cables
  281. Extracting R, L, G, C parameters of dispersive planar transmission lines from measured S-parameters using a genetic algorithm
  282. Extraction of SPICE-type equivalent circuits of signal via transitions using the PEEC method
  283. Extraction of a SPICE via model from full-wave modeling for differential signaling
  284. Issues in validation of complex-valued simulations for signal integrity analysis
  285. On characterizing artifacts observed in PEEC based modeling
  286. Stability of PEEC models with respect to partial element accuracy
  287. Validation of equivalent circuits extracted from S-parameter data for eye-pattern evaluation
  288. 3D PEEC capacitance calculations
  289. Characterization of interconnections performances for high speed digital boards: a frequency/time domain approach
  290. Characterization of via holes discontinuities by means of numerical de-embedding
  291. On modeling accuracy of EMI problems using PEEC
  292. Reconstruction of the parameters of Debye and Lorentzian dispersive media using a genetic algorithm
  293. SPICE model libraries for via transitions
  294. A genetic optimization technique for intrinsic material properties extraction
  295. EMI design of power drive system cages using the PEEC method and genetic optimization techniques
  296. Fast multipole method based extraction of PEEC parameters
  297. Harten's scheme for PEEC method
  298. On the incorporation of frequency dependent dielectric losses in FDTD formulation for differential transmission lines
  299. An efficient digital controller for active shielding circuits
  300. Optimal electromagnetic shielding design considering multiple constraints
  301. Optimization of the LPS configuration for minimization of the radiated electromagnetic field
  302. Speed-up of PEEC method by using wavelet transform
  303. Extension of the partial element equivalent circuit method to non-rectangular geometries
  304. Interfacing a full wave circuit approach to lumped networks and PML absorbing boundary conditions
  305. A circuit approach for two-dimensional EMI electromagnetic modeling
  306. Three dimensional model based on image theory for low frequency correction factors evaluation in semi-anechoic chambers