All Stories

  1. Stability, Thermal Conductivity, Viscosity, and Tribological Characterization of Zirconia Nanofluids as a Function of Nanoparticle Concentration

    Article • Tribology Transactions, October 2019, Taylor & Francis

    Dr Gary C Barber

  2. Influence of MoS2 and PTFE in oil film characteristics and tribological performance in EHL point contacts

    Article • Tribology - Materials Surfaces & Interfaces, April 2019, Taylor & Francis

    Dr Gary C Barber

  3. Scuffing Test Rig for Piston Wrist Pin and Pin Bore

    Article • SAE International Journal of Fuels and Lubricants, April 2015, SAE International

    Dr Gary C Barber

  4. Effect of Surface Roughness and Lubrication on Scuffing for Austempered Ductile Iron (ADI)

    Article • SAE International Journal of Fuels and Lubricants, April 2015, SAE International

    Dr Gary C Barber

  5. Coupled Effects between Solid Particles and Gas Velocities on Erosion of Elbows in Natural Gas Pipelines

    Article • Procedia Engineering, January 2015, Elsevier

    Dr Gary C Barber

  6. Microstructural Contact Mechanics Finite Element Modeling Used to Study the Effect of Coating Induced Residual Stresses on Bearing Failure Mechanisms

    Article • SAE International Journal of Materials and Manufacturing, April 2014, SAE International

    Dr Gary C Barber

  7. Engaging Underrepresented Undergraduates in Engineering Through a Hands-On Automotive-Themed REU Program

    Article • November 2013, ASME International

    Dr Gary C Barber

  8. Austempering Process for Carburized Low Alloy Steels

    Article • April 2013, SAE International

    Dr Gary C Barber

  9. Study of the Motion of Floating Piston Pin against Pin Bore

    Article • SAE International Journal of Engines, April 2013, SAE International

    Dr Gary C Barber

  10. Tribological Performance of ZnO-Oil Nanofluids at Elevated Temperatures

    Article • SAE International Journal of Fuels and Lubricants, April 2013, SAE International

    Dr Gary C Barber

  11. Investigation of surface characteristics and tribological behavior of clutch plate materials

    Article • Wear, April 2013, Elsevier

    Dr Gary C Barber

  12. Simulation of the Tribological Behavior of Engine Components

    Article • January 2013, Springer Science + Business Media

    Dr Gary C Barber

  13. A Transferable Education Model for Creating Work-Ready College Graduates

    Article • November 2012, ASME International

    Dr Gary C Barber

  14. Evaluation of the convective heat transfer coefficient for minimum quantity lubrication (MQL)

    Article • Industrial Lubrication and Tribology, September 2012, Emerald

    Dr Gary C Barber

  15. Investigation of the Validity of the Carslaw and Jaeger Thermal Theory under Different Working Conditions

    Article • Tribology Transactions, January 2012, Taylor & Francis

    Dr Gary C Barber

  16. Wear Resistance of Stamping Die Coatings

    Article • April 2011, SAE International

    Dr Gary C Barber

  17. Effect of Material Microstructure on Scuffing Behavior of Ferrous Alloys

    Article • April 2011, SAE International

    Dr Gary C Barber

  18. Cutting insert and work piece materials for minimum quantity lubrication

    Article • December 2010, SPIE

    Dr Gary C Barber

  19. Friction and Wear of Low-Phosphorus Engine Oils with Additional Molybdenum and Boron Compounds, Measured on a Reciprocating Lubricant Tester

    Article • Tribology Transactions, September 2008, Taylor & Francis

    Dr Gary C Barber

  20. Robust Optimization of Engine Lubrication System

    Article • April 2007, SAE International

    Dr Gary C Barber

  21. Engine Lubrication System Analysis by Considering Aeration and Cavitation within the Rotating Oil Supply Passage

    Article • Tribology Transactions, April 2007, Taylor & Francis

    Dr Gary C Barber

  22. Effect of Tightening Speed on the Torque-Tension and Wear Pattern in Bolted Connections

    Article • Journal of Pressure Vessel Technology, January 2007, ASME International

    Dr Gary C Barber

  23. A Numerical Investigation of Bolt Underhead Temperature Evolution During Tightening

    Article • January 2007, ASME International

    Dr Gary C Barber

  24. Tool wear reduction through an externally applied electric current

    Article • Wear, February 2006, Elsevier

    Dr Gary C Barber

  25. Effect of Tightening Speed on the Torque-Tension and Wear Pattern in Bolted Connections

    Article • January 2006, ASME International

    Dr Gary C Barber

  26. Thread Friction Torque in Bolted Joints

    Article • Journal of Pressure Vessel Technology, January 2005, ASME International

    Dr Gary C Barber

  27. Wear Model for Piston Ring and Cylinder Bore System

    Article • January 2005, ASME International

    Dr Gary C Barber

  28. Thread Friction Torque in Bolted Joints

    Article • January 2004, ASME International

    Dr Gary C Barber

  29. Prediction of Draw Bead Coefficient of Friction Using Surface Temperature

    Article • March 2002, SAE International

    Dr Gary C Barber

  30. Cutting Tool Performance of Laser Coated Diamond Coating and Diamond Facing Inserts

    Article • Tribology Transactions, January 2002, Taylor & Francis

    Dr Gary C Barber

  31. Engagement of a Rough, Lubricated and Grooved Disk Clutch ith a Porous Deformable Paper-Based Friction Material

    Article • Tribology Transactions, January 2002, Taylor & Francis

    Dr Gary C Barber

  32. Surface Roughness Model for Worn Inserts of Face Milling: Part I — Factors that Affect Arithmetic Surface Roughness

    Article • Tribology Transactions, January 2001, Taylor & Francis

    Dr Gary C Barber

  33. Surface Roughness Model for Worn Inserts of Face Milling: Part II — An Empirical Model

    Article • Tribology Transactions, January 2001, Taylor & Francis

    Dr Gary C Barber

  34. A Study on An FFT-Based Approach for Fast Estimation of Pressure Distribution in Point EHL Contacts of Rough Surfaces

    Article • Tribology Transactions, January 2001, Taylor & Francis

    Dr Gary C Barber

  35. Tool life and wear mechanism of uncoated and coated milling inserts

    Article • Wear, April 1999, Elsevier

    Dr Gary C Barber

  36. Numerical Analysis for the Elastic Contact of Real Rough Surfaces

    Article • Tribology Transactions, January 1999, Taylor & Francis

    Dr Gary C Barber

  37. A self-contained, portable variable-pressure hydrostatic cell for use in low gauge pressure electromagnetic, ultrasonic, and photoacoustic studies

    Article • Review of Scientific Instruments, January 1999, American Institute of Physics

    Dr Gary C Barber

  38. Effect of Flank Wear on the Topography of Machined Surfaces

    Article • Tribology Transactions, January 1993, Taylor & Francis

    Dr Gary C Barber