All Stories

  1. Material extrusion of thermoplastic acrylic for intraoral devices: Technical feasibility and evaluation

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2023, Elsevier

    Dr Frank Alifui-Segbaya, Dr Khaled E Ahmed

  2. Assessing the Impact of Resin Type, Post-Processing Technique, and Arch Location on the Trueness and Precision of 3D-Printed Full-Arch Implant Surgical Guides

    Article • Applied Sciences, February 2023, MDPI AG

    Dr Frank Alifui-Segbaya, Dr Khaled E Ahmed

  3. The Effect of Stacking on the Accuracy of 3D-Printed Full-Arch Dental Models

    Article • Polymers, December 2022, MDPI AG

    Dr Frank Alifui-Segbaya, Dr Khaled E Ahmed

  4. Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Article • Journal of Manufacturing and Materials Processing, December 2021, MDPI AG

    Dr Frank Alifui-Segbaya

  5. Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Article • November 2021, MDPI AG

    Dr Frank Alifui-Segbaya

  6. Hierarchical homogenization and experimental evaluation of functionally graded materials manufactured by the fused filament fabrication process

    Article • Composite Structures, November 2021, Elsevier

    Dr Frank Alifui-Segbaya

  7. A Proposed In Vitro Methodology for Assessing the Accuracy of Three-Dimensionally Printed Dental Models and the Impact of Storage on Dimensional Stability

    Article • Applied Sciences, June 2021, MDPI AG

    Dr Frank Alifui-Segbaya, Dr Khaled E Ahmed

  8. Accuracy of 3-Dimensionally Printed Full-Arch Dental Models: A Systematic Review

    Article • Journal of Clinical Medicine, October 2020, MDPI AG

    Dr Frank Alifui-Segbaya, Dr Khaled E Ahmed

  9. Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion

    Article • Inventions, August 2020, MDPI AG

    Dr Frank Alifui-Segbaya

  10. Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion

    Article • August 2020, MDPI AG

    Dr Frank Alifui-Segbaya

  11. Biomedical photopolymers in 3D printing

    Article • Rapid Prototyping Journal, November 2019, Emerald

    Dr Frank Alifui-Segbaya

  12. Chemical composition and degradation products in additively manufactured methacrylates for dental devices

    Article • Additive Manufacturing, November 2019, Elsevier

    Dr Frank Alifui-Segbaya

  13. The trends and challenges of fiber reinforced additive manufacturing

    Article • The International Journal of Advanced Manufacturing Technology, January 2019, Springer Science + Business Media

    Dr Frank Alifui-Segbaya

  14. Australian Dental Research Foundation Special Research Supplement 2018

    Article • Australian Dental Journal, November 2018, Wiley

    Dr Frank Alifui-Segbaya

  15. Additive Manufacturing of Cobalt-Based Dental Alloys: Analysis of Microstructure and Physicomechanical Properties

    Article • Advances in Materials Science and Engineering, November 2018, Hindawi Publishing Corporation

    Dr Frank Alifui-Segbaya, Markus Merkel

  16. Toxicological assessment of additively manufactured methacrylates for medical devices in dentistry

    Article • Acta Biomaterialia, September 2018, Elsevier

    Dr Frank Alifui-Segbaya

  17. Biocompatibility of 3D-Printed Methacrylate for Hearing Devices

    Article • Inventions, July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  18. Biocompatibility of 3D Printed Methacrylate for Hearing Aids and Inner Ear Devices

    Article • July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  19. Biocompatibility of 3D Printed Methacrylate for Hearing Aids and Inner Ear Devices

    Article • July 2018, MDPI AG

    Dr Frank Alifui-Segbaya

  20. Biocompatibility of Photopolymers in 3D Printing

    Article • 3D Printing and Additive Manufacturing, December 2017, Mary Ann Liebert Inc

    Dr Frank Alifui-Segbaya

  21. In vitro corrosion analyses of heat treated cobalt-chromium alloys manufactured by direct metal laser sintering

    Article • Rapid Prototyping Journal, January 2015, Emerald

    Dr Frank Alifui-Segbaya

  22. Clinical Relevance of Laser-Sintered Co-Cr Alloys for Prosthodontic Treatments: A Review

    Article • January 2014, Research Publishing Services

    Dr Frank Alifui-Segbaya

  23. The corrosive effects of artificial saliva on cast and rapid manufacture‐produced cobalt chromium alloys

    Article • Rapid Prototyping Journal, March 2013, Emerald

    Dr Frank Alifui-Segbaya