All Stories

  1. Einstufige Treibstoffsynthese mittels gedruckter Katalysatorschichten in mikrostrukturierten Reaktoren

    Article • Chemie Ingenieur Technik, May 2017, Wiley

    Dr Joachim R. Binder

  2. Implementation of Ba0.6Sr0.4TiO3-ZnO-B2O3based tunable microwave phase shifters in LTCC technology

    Article • International Journal of Applied Ceramic Technology, April 2017, Wiley

    Dr Joachim R. Binder

  3. Electrochemical characterization of monoclinic and orthorhombic Li3CrF6 as positive electrodes in lithium-ion batteries synthesized by a sol–gel process with environmentally benign chemicals

    Article • Journal of Power Sources, October 2015, Elsevier

    Dr Joachim R. Binder

  4. Direct Inkjet Printing of Dielectric Ceramic/Polymer Composite Thick Films

    Article • Advanced Engineering Materials, January 2015, Wiley

    Dr Joachim R. Binder

  5. Direct synthesis of trirutile-type LiMgFeF6 and its electrochemical characterization as positive electrode in lithium-ion batteries

    Article • Journal of Power Sources, January 2015, Elsevier

    Dr Joachim R. Binder

  6. Evidence of loss of active lithium in titanium-doped LiNi0.5Mn1.5O4/graphite cells

    Article • Journal of Power Sources, January 2015, Elsevier

    Dr Joachim R. Binder

  7. Inkjet-Printed Metal-Insulator-Metal Capacitors for Tunable Microwave Applications

    Article • International Journal of Applied Ceramic Technology, November 2014, Wiley

    Dr Joachim R. Binder

  8. Tunable impedance matching networks on printed ceramics for output matching of RF-power transistors

    Article • October 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  9. Fully Screen-Printed Tunable Microwave Components Based on Optimized Barium Strontium Titanate Thick Films

    Article • International Journal of Applied Ceramic Technology, June 2014, Wiley

    Dr Joachim R. Binder

  10. Local structural changes in LiMn1.5Ni0.5O4 spinel cathode material for lithium-ion batteries

    Article • Journal of Power Sources, June 2014, Elsevier

    Neeraj Sharma, Dr Joachim R. Binder

  11. Fully printed tunable phase shifter for L/S-band phased array application

    Article • June 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  12. Sol–gel processing and electrochemical characterization of monoclinic Li3FeF6

    Article • Journal of Sol-Gel Science and Technology, March 2014, Springer Science + Business Media

    Dr Joachim R. Binder

  13. Impact of microwave sintering on dielectric properties of screen printed Ba0.6Sr0.4TiO3 thick films

    Article • Journal of the European Ceramic Society, March 2014, Elsevier

    Dr Joachim R. Binder

  14. Improving mechanical fatigue resistance by optimizing the nanoporous structure of inkjet-printed Ag electrodes for flexible devices

    Article • Nanotechnology, February 2014, Institute of Physics Publishing

    Dr Joachim R. Binder

  15. Load modulation for high power applications based on printed ceramics

    Article • June 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  16. Effects of ZnO-B2O3Addition on the Microstructure and Microwave Properties of Low-Temperature Sintered Barium Strontium Titanate (BST) Thick Films

    Article • International Journal of Applied Ceramic Technology, May 2013, Wiley

    Dr Joachim R. Binder

  17. Impact of powder morphology on quality of low-pressure injection moulded reaction-bonded net shape oxide ceramics

    Article • Journal of the European Ceramic Society, April 2013, Elsevier

    Dr Joachim R. Binder

  18. Post-doping via spray-drying: a novel sol–gel process for the batch synthesis of doped LiNi0.5Mn1.5O4 spinel material

    Article • Journal of Materials Science, January 2013, Springer Science + Business Media

    Dr Joachim R. Binder

  19. Beam Steering Transmitarray Using Tunable Frequency Selective Surface With Integrated Ferroelectric Varactors

    Article • IEEE Transactions on Antennas and Propagation, December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  20. Influence of spray granulation on the properties of wet chemically synthesized Li1.3Ti1.7Al0.3(PO4)3 (LATP) powders

    Article • Solid State Ionics, October 2011, Elsevier

    Dr Joachim R. Binder

  21. Compact Substrate Integrated Waveguide Tunable Filter Based on Ferroelectric Ceramics

    Article • IEEE Microwave and Wireless Components Letters, September 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  22. Low-Cost Phased-Array Antenna Using Compact Tunable Phase Shifters Based on Ferroelectric Ceramics

    Article • IEEE Transactions on Microwave Theory and Techniques, May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Joachim R. Binder

  23. Nonlinear ceramics for tunable microwave devices part I: materials properties and processing

    Article • Microsystem Technologies, February 2011, Springer Science + Business Media

    Dr Joachim R. Binder

  24. Nonlinear ceramics for tunable microwave devices

    Article • Microsystem Technologies, February 2011, Springer Science + Business Media

    Dr Joachim R. Binder

  25. Characterization of metal (Fe, Co, Ni, Cu) and fluorine codoped barium strontium titanate thick-films for microwave applications

    Article • Journal of Electroceramics, May 2009, Springer Science + Business Media

    Dr Joachim R. Binder

  26. Manufacturing of Net-Shape Reaction-Bonded Ceramic Microparts by Low-Pressure Injection Molding

    Article • Advanced Engineering Materials, May 2009, Wiley

    Dr Joachim R. Binder

  27. Optimizing Net-Shape Ceramics for Green Machining

    Article • International Journal of Applied Ceramic Technology, January 2009, Wiley

    Dr Joachim R. Binder, Dr Thomas Gietzelt

  28. The thermal decomposition of an organometallic precursor for the preparation of YBa2Cu3O7−x

    Article • Advanced Materials, January 1997, Wiley

    Professor Hans Reuter, Dr Joachim R. Binder