All Stories

  1. Influence of temperature on the modal behavior of monolayer graphene sheets

    Article • Journal of Applied Physics, May 2018, American Institute of Physics

    Professor Nick K. Anifantis

  2. Finite element prediction of stress transfer in h-BN sheet nanocomposites

    Article • International Journal of Structural Integrity, February 2018, Emerald

    Professor Nick K. Anifantis

  3. Finite Element Modeling of Nanotubes

    Article • January 2018, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  4. Multiscale simulation of fullerene reinforced composite structures: From molecular dynamics to finite element continuum mechanics

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Nick K. Anifantis, Georgios Giannopoulos

  5. Finite Element Simulation of the Thermo-mechanical Response of Graphene Reinforced Nanocomposites

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Nick K. Anifantis

  6. Elastic mechanical properties of BNNS reinforced composite materials. A finite elements approach.

    Article • Journal of Composite Materials, November 2017, SAGE Publications

    Professor Nick K. Anifantis

  7. Characterizing the Energy Storage in Unidirectionally Packed Single Walled Carbon Nanotube Bundles

    Article • Journal of Computational and Theoretical Nanoscience, November 2017, American Scientific Publishers

    Professor Nick K. Anifantis, Georgios Giannopoulos

  8. Designing pinhole vacancies in graphene towards functionalization: Effects on critical buckling load

    Article • Superlattices and Microstructures, March 2017, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  9. Finite element prediction of stress transfer in graphene nanocomposites: The interface effect

    Article • Composite Structures, October 2016, Elsevier

    Professor Nick K. Anifantis

  10. Numerical prediction of mechanical behavior of single walled carbon nanotube/rubber composites

    Article • September 2016, Taylor & Francis

    Professor Nick K. Anifantis

  11. Coupled thermomechanical behavior of graphene using the spring-based finite element approach

    Article • Journal of Applied Physics, July 2016, American Institute of Physics

    Professor Nick K. Anifantis, Georgios Giannopoulos

  12. Three-dimensional finite element modeling for post-buckling analysis of cracked columns

    Article • International Journal of Structural Integrity, June 2016, Emerald

    Professor Nick K. Anifantis

  13. Mechanical properties of graphene nanocomposites: A multiscale finite element prediction

    Article • Composite Structures, November 2015, Elsevier

    Professor Nick K. Anifantis

  14. Numerical stability analysis of imperfect single-walled carbon nanotubes under axial compressive loads

    Article • International Journal of Structural Integrity, August 2015, Emerald

    Professor Nick K. Anifantis, Georgios Giannopoulos

  15. Coupled vibration response of a shaft with a breathing crack

    Article • Journal of Sound and Vibration, February 2015, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  16. Finite element prediction of seismic response modification of monumental structures utilizing base isolation

    Article • Journal of the Mechanical Behavior of Materials, January 2015, De Gruyter

    Professor Nick K. Anifantis

  17. Monolayer graphene resonators for mass detection: A structural mechanics feasibility study

    Article • Sensors and Actuators A Physical, September 2014, Elsevier

    Professor Nick K. Anifantis

  18. Investigation of stress transfer in carbon nanotube reinforced composites using a multi-scale finite element approach

    Article • Composites Part B Engineering, July 2014, Elsevier

    Professor Nick K. Anifantis

  19. Mechanical vibrations of carbon nanotube-based mass sensors: an analytical approach

    Article • Sensor Review, June 2014, Emerald

    Professor Nick K. Anifantis, Georgios Giannopoulos

  20. Crack Closure

    Article • January 2014, Springer Science + Business Media

    Professor Nick K. Anifantis

  21. The Effect of Atom Vacancy Defect on the Vibrational Behavior of Single-Walled Carbon Nanotubes: A Structural Mechanics Approach

    Article • Advances in Mechanical Engineering, January 2014, SAGE Publications

    Georgios Giannopoulos, Professor Nick K. Anifantis

  22. A Heterogeneous Discrete Approach of Interfacial Effects on Multi-Scale Modelling of Carbon Nanotube and Graphene Based Composites

    Article • October 2013, Springer Science + Business Media

    Georgios Giannopoulos, Professor Nick K. Anifantis

  23. Elastomer Macrocomposites

    Article • January 2013, Springer Science + Business Media

    Professor Nick K. Anifantis, Georgios Giannopoulos

  24. Radial Stiffness and Natural Frequencies of Fullerenes via a Structural Mechanics Spring-based Method

    Article • Fullerenes Nanotubes and Carbon Nanostructures, January 2013, Taylor & Francis

    Georgios Giannopoulos, Professor Nick K. Anifantis

  25. Three-dimensional finite element modeling of a vibrating beam with a breathing crack

    Article • Archive of Applied Mechanics, May 2012, Springer Science + Business Media

    Professor Nick K. Anifantis

  26. Limit load analysis of graphene with pinhole defects: A nonlinear structural mechanics approach

    Article • International Journal of Mechanical Sciences, February 2012, Elsevier

    Professor Nick K. Anifantis

  27. Experimental, analytical, and numerical investigation of interphasial stress and strain fields in MWCNT polymer composites

    Article • Journal of Applied Polymer Science, August 2011, Wiley

    Professor Nick K. Anifantis

  28. Graphene characterization: A fully non-linear spring-based finite element prediction

    Article • Physica E Low-dimensional Systems and Nanostructures, August 2011, Elsevier

    Professor Nick K. Anifantis

  29. Size-dependent non-linear mechanical properties of graphene nanoribbons

    Article • Computational Materials Science, May 2011, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  30. An Atomistic-based Spring-mass Finite Element Approach for Vibration Analysis of Carbon Nanotube Mass Detectors

    Article • April 2011, IntechOpen

    Professor Nick K. Anifantis

  31. Fatigue life prediction under cyclic thermal loads using the boundary elements method for two-dimensional problems

    Article • Computers & Structures, April 2011, Elsevier

    Professor Nick K. Anifantis

  32. Vibration Analysis of a Rotating Disk with a Crack

    Article • ISRN Mechanical Engineering, January 2011, Hindawi Publishing Corporation

    Professor Nick K. Anifantis

  33. Numerical investigation of elastic mechanical properties of graphene structures

    Article • Materials & Design (1980-2015), December 2010, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  34. Boundary element analysis of cracked homogeneous or bi-material structures under thermo-mechanical cycling

    Article • Computer Methods in Applied Mechanics and Engineering, December 2010, Elsevier

    Professor Nick K. Anifantis

  35. A semi-continuum finite element approach to evaluate the Young’s modulus of single-walled carbon nanotube reinforced composites

    Article • Composites Part B Engineering, December 2010, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  36. On the coupling of axial and shear deformations of single-walled carbon nanotubes and graphene: a numerical study

    Article • Proceedings of the Institution of Mechanical Engineers Part N Journal of Nanoengineering and Nanosystems, December 2010, SAGE Publications

    Georgios Giannopoulos, Professor Nick K. Anifantis

  37. EVALUATION OF MASS SENSING CHARACTERISTICS OF SINGLE-WALLED CARBON NANOTUBES

    Article • August 2010, World Scientific Pub Co Pte Lt

    Professor Nick K. Anifantis

  38. Effective Young's Modulus of Carbon Nanotube Composites: From Multi-Scale Finite Element Predictions to an Analytical Rule

    Article • Journal of Computational and Theoretical Nanoscience, August 2010, American Scientific Publishers

    Georgios Giannopoulos, Professor Nick K. Anifantis

  39. Finite element modeling of a vibrating beam with a breathing crack: observations on crack detection

    Article • Structural Health Monitoring, June 2010, SAGE Publications

    Professor Nick K. Anifantis

  40. Boundary element prediction of TBC fracture resistance

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2010, Wiley

    Professor Nick K. Anifantis

  41. Carbon nanotube-based resonant nanomechanical sensors: A computational investigation of their behavior

    Article • Physica E Low-dimensional Systems and Nanostructures, March 2010, Elsevier

    Professor Nick K. Anifantis

  42. Evaluation of residual stress assessment methods using a repair weld benchmark

    Article • The Journal of Strain Analysis for Engineering Design, January 2010, SAGE Publications

    Professor Nick K. Anifantis

  43. A Numerical Investigation on the Influence of Steel Fiber Shape and Interface Strength in Reinforced Concrete

    Article • Composite Interfaces, January 2010, Taylor & Francis

    Professor Nick K. Anifantis, Georgios Giannopoulos

  44. Investigation of stress–strain behavior of single walled carbon nanotube/rubber composites by a multi-scale finite element method

    Article • Theoretical and Applied Fracture Mechanics, December 2009, Elsevier

    Georgios Giannopoulos, Professor Nick K. Anifantis

  45. Vibration analysis of multi-walled carbon nanotubes using a spring–mass based finite element model

    Article • Computational Materials Science, November 2009, Elsevier

    Professor Nick K. Anifantis

  46. Numerical prediction of mechanical behavior of single walled carbon nanotube/rubber composites

    Article • September 2009, Taylor & Francis

    Professor Nick K. Anifantis, Georgios Giannopoulos

  47. Thermal expansivities in fibrous composites incorporating hybrid interphase regions

    Article • Composite Structures, May 2009, Elsevier

    Professor Nick K. Anifantis

  48. Thermomechanical Interfacial Crack Closure: A BEM Approach

    Article • January 2009, Springer Science + Business Media

    Professor Nick K. Anifantis, Georgios Giannopoulos

  49. An insight into the breathing mechanism of a crack in a rotating shaft

    Article • Journal of Sound and Vibration, November 2008, Elsevier

    Professor Nick K. Anifantis

  50. An efficient numerical model for vibration analysis of single-walled carbon nanotubes

    Article • Computational Mechanics, October 2008, Springer Science + Business Media

    Professor Nick K. Anifantis, Georgios Giannopoulos

  51. EVALUATION OF VIBRATIONAL CHARACTERISTICS OF CARBON NANOTUBE RESONATORS

    Article • May 2008, World Scientific Pub Co Pte Lt

    Professor Nick K. Anifantis, Georgios Giannopoulos

  52. Formulation of cracked beam element for analysis of fractured skeletal structures

    Article • Engineering Structures, April 2008, Elsevier

    Professor Nick K. Anifantis

  53. Evaluation of the effective mechanical properties of single walled carbon nanotubes using a spring based finite element approach

    Article • Computational Materials Science, February 2008, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  54. Finite element prediction of debonding onset in short fiber reinforced polymers incorporating a hybrid interphase region

    Article • Composite Interfaces, January 2008, Taylor & Francis

    Professor Nick K. Anifantis

  55. Micromechanical modeling of mechanical behavior of Ti–6Al–4V/TiB composites using FEM analysis

    Article • Computational Materials Science, April 2007, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  56. Stress analysis of short fiber-reinforced polymers incorporating a hybrid interphase region

    Article • Composite Interfaces, January 2007, Taylor & Francis

    Professor Nick K. Anifantis

  57. A BEM analysis for thermomechanical closure of interfacial cracks incorporating friction and thermal resistance

    Article • Computer Methods in Applied Mechanics and Engineering, January 2007, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  58. Mixed Finite Element Analysis of Elastomeric Butt-Joints

    Article • Journal of Engineering Materials and Technology, January 2007, ASME International

    Professor Nick K. Anifantis, Georgios Giannopoulos

  59. A comparative study on the failure resistance of thermal barrier coatings

    Article • Computers & Structures, November 2006, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  60. Letterbox Type Repair Weld Finite Element Simulation and Residual Stress Prediction

    Article • September 2006, CrossRef Test Account

    Professor Nick K. Anifantis

  61. Letterbox Type Repair Weld Finite Element Simulation and Residual Stress Prediction

    Article • Materials Science Forum, January 2006, Trans Tech Publications

    Professor Nick K. Anifantis

  62. Thermal fracture interference: a two-dimensional boundary element approach

    Article • International Journal of Fracture, April 2005, Springer Science + Business Media

    Professor Nick K. Anifantis, Georgios Giannopoulos

  63. Finite element analysis of crack closure in two-dimensional bodies subjected to heating

    Article • Computers & Structures, January 2005, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  64. Boundary-only element analysis of crack contact under thermal shock

    Article • Engineering Fracture Mechanics, January 2005, Elsevier

    Professor Nick K. Anifantis, Georgios Giannopoulos

  65. Interfacial steady-state and transient thermal fracture of dissimilar media using the boundary element contact analysis

    Article • International Journal for Numerical Methods in Engineering, January 2005, Wiley

    Professor Nick K. Anifantis, Georgios Giannopoulos

  66. Effective moduli of hyperelastic porous media at large deformation

    Article • Acta Mechanica, February 2003, Springer Science + Business Media

    Professor Nick K. Anifantis

  67. Three-Dimensional Finite Element Analysis Around Broken Fibers in FRPs

    Article • January 2003, Springer Science + Business Media

    Professor Nick K. Anifantis

  68. Correlation Between Micromechanical and Macromechanical Properties of Composite Materials Based on a New Interphase Concept

    Article • January 2003, Springer Science + Business Media

    Professor Nick K. Anifantis

  69. Finite element modeling of spur gearing fractures

    Article • Finite Elements in Analysis and Design, December 2002, Elsevier

    Professor Nick K. Anifantis

  70. Thermal stresses in fibrous composites incorporating hybrid interphase regions

    Article • Composites Science and Technology, November 2002, Elsevier

    Professor Nick K. Anifantis

  71. Numerical simulation of interfacial debonding in particulate composites considering material inhomogeneities

    Article • Macromolecular Symposia, March 2002, Wiley

    Professor Nick K. Anifantis

  72. Crack surface interference: a finite element analysis

    Article • Engineering Fracture Mechanics, August 2001, Elsevier

    Professor Nick K. Anifantis

  73. VIBRATIONAL CONDITIONING OF SURFACE LASER PROCESSING: A FEASIBILITY STUDY

    Article • Journal of Sound and Vibration, August 2001, Elsevier

    Professor Nick K. Anifantis

  74. Numerical simulation of conjugate spur gear action

    Article • Computers & Structures, May 2001, Elsevier

    Professor Nick K. Anifantis

  75. Performance of variable order singular elements in analyzing interfacial fractures

    Article • Computational Mechanics, February 2001, Springer Science + Business Media

    Professor Nick K. Anifantis

  76. Dynamics of fractured Timoshenko beams moving in wavy fluids

    Article • Computers & Structures, February 2001, Elsevier

    Professor Nick K. Anifantis

  77. Load carrying characteristics of short fiber composites containing a heterogeneous interphase region

    Article • Computational Materials Science, January 2001, Elsevier

    Professor Nick K. Anifantis

  78. Micromechanical stress analysis of closely packed fibrous composites

    Article • Composites Science and Technology, June 2000, Elsevier

    Professor Nick K. Anifantis

  79. Structural damping determination by finite element approach

    Article • Computers & Structures, October 1999, Elsevier

    Professor Nick K. Anifantis

  80. An approach to the dynamic modelling of manufacturing systems

    Article • International Journal of Production Research, February 1998, Taylor & Francis

    Professor Nick K. Anifantis

  81. Biology between University and Proletariat: The Making of a Red Professor

    Article • History of Science, December 1997, SAGE Publications

    Professor Nick K. Anifantis

  82. THERMAL STRESS OPTIMIZATION IN METAL ROLLING

    Article • Journal of Thermal Stresses, September 1997, Taylor & Francis

    Professor Nick K. Anifantis

  83. Boundary element analysis of gear teeth fracture

    Article • Engineering Analysis with Boundary Elements, September 1997, Elsevier

    Professor Nick K. Anifantis

  84. Laser Assisted Machining: An Overview

    Article • Journal of Manufacturing Science and Engineering, January 1997, ASME International

    Professor Nick K. Anifantis

  85. Thermal stress concentration due to imperfect adhesion in fiber-reinforced composites

    Article • Composites Science and Technology, January 1997, Elsevier

    Professor Nick K. Anifantis

  86. Performance of quarter-point boundary elements in analysing thermally stressed kinked and curved cracks

    Article • Computer Methods in Applied Mechanics and Engineering, October 1996, Elsevier

    Professor Nick K. Anifantis

  87. Boundary element analysis of thermally stressed interface cracks

    Article • Engineering Fracture Mechanics, January 1995, Elsevier

    Professor Nick K. Anifantis

  88. The effect of interfacial imperfections on the micromechanical stress and strain distribution in fibre reinforced composites

    Article • Journal of Materials Science, January 1995, Springer Science + Business Media

    Professor Nick K. Anifantis

  89. Vibration of cracked annular plates

    Article • Engineering Fracture Mechanics, October 1994, Elsevier

    Professor Nick K. Anifantis

  90. Flash and bulk temperatures of gear teeth due to friction

    Article • Mechanism and Machine Theory, January 1993, Elsevier

    Professor Nick K. Anifantis

  91. Dynamics of cracked hollow beamsGounaris, G., Anifantis, N. and Dimarogonas, A.D. Eng. Fract. Mech. 1991 39, (6), 931–940

    Article • International Journal of Fatigue, May 1992, Elsevier

    Professor Nick K. Anifantis

  92. Dynamics of cracked hollow beams

    Article • Engineering Fracture Mechanics, January 1991, Elsevier

    Professor Nick K. Anifantis

  93. Post buckling behavior of transverse cracked columns

    Article • Computers & Structures, January 1984, Elsevier

    Professor Nick K. Anifantis

  94. Imperfection post-buckling analysis of cracked columns

    Article • Engineering Fracture Mechanics, January 1983, Elsevier

    Professor Nick K. Anifantis

  95. Stability of columns with a single crack subjected to follower and vertical loads

    Article • International Journal of Solids and Structures, January 1983, Elsevier

    Professor Nick K. Anifantis

  96. BEM Prediction of TBC Fracture Resistance

    Article • Springer Science + Business Media

    Professor Nick K. Anifantis

  97. Non-Linear Structural Damping Determination by Finite Element Approach

    Article • Civil-Comp, Ltd.

    Professor Nick K. Anifantis

  98. Residual Stress Prediction In Letterbox-Type Repair Welds

    Article • Springer Science + Business Media

    Professor Nick K. Anifantis

  99. Residual Stress Prediction in Letterbox-Type Repair Welds

    Article • Springer Science + Business Media

    Professor Nick K. Anifantis