All Stories

  1. Latest progress on tribological properties of industrial materials

    Article • Materials & Design (1980-2015), May 2014, Elsevier

    Professor Fehim Findik

  2. The effect of applied load and sliding speed on the tribological properties of Nylon 6 and ultra-high-molecular-weight polyethylene

    Article • Industrial Lubrication and Tribology, April 2014, Emerald

    Professor Fehim Findik

  3. Microstructural and mechanical characterization of injection molded 718 superalloy powders

    Article • Journal of Alloys and Compounds, November 2013, Elsevier

    Professor Fehim Findik

  4. Dry Sliding Wear Behavior of Al 2 O 3 /SiC Particle Reinforced Aluminium Based MMCs Fabricated by Stir Casting Method

    Article • Acta Physica Polonica A, July 2013, Institute of Physics, Polish Academy of Sciences

    Professor Fehim Findik

  5. An expert system based material selection approach to manufacturing

    Article • Materials & Design (1980-2015), May 2013, Elsevier

    Professor Fehim Findik

  6. Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM Composites

    Article • Polymer-Plastics Technology and Engineering, April 2013, Taylor & Francis

    Professor Fehim Findik

  7. Effects of Mg content on aging behavior of Al4CuXMg PM alloy

    Article • Materials & Design (1980-2015), April 2013, Elsevier

    Professor Fehim Findik, Dr Azim GÖKÇE

  8. Injection molding of nickel based 625 superalloy: Sintering, heat treatment, microstructure and mechanical properties

    Article • Journal of Alloys and Compounds, January 2013, Elsevier

    Professor Fehim Findik

  9. Improvements in spinodal alloys from past to present

    Article • Materials & Design (1980-2015), December 2012, Elsevier

    Professor Fehim Findik

  10. Materials selection for lighter wagon design with a weighted property index method

    Article • Materials & Design (1980-2015), May 2012, Elsevier

    Professor Fehim Findik

  11. Extension in Shelf Life of Fresh Food Using Nanomaterials Food Packages

    Article • Polymer-Plastics Technology and Engineering, April 2012, Taylor & Francis

    Professor Fehim Findik

  12. Selection and Implementation of ERP Systems: A Comparison of SAP implementation between BIH and Turkey

    Article • South East European Journal of Economics and Business, April 2012, De Gruyter

    Professor Fehim Findik

  13. Microstructural examination and properties of premixed Al–Cu–Mg powder metallurgy alloy

    Article • Materials Characterization, July 2011, Elsevier

    Professor Fehim Findik, Dr Azim GÖKÇE

  14. Recent developments in explosive welding

    Article • Materials & Design (1980-2015), March 2011, Elsevier

    Professor Fehim Findik

  15. A Case Study on the Selection of Materials for Eye Lenses

    Article • ISRN Mechanical Engineering, January 2011, Hindawi Publishing Corporation

    Professor Fehim Findik

  16. Properties of hybrid fiber reinforced concrete under repeated impact loads

    Article • Russian Journal of Nondestructive Testing, July 2010, Pleiades Publishing Ltd

    Professor Fehim Findik

  17. Wear properties of magnesium matrix composites reinforced with SiO2particles

    Article • Industrial Lubrication and Tribology, June 2010, Emerald

    Professor Fehim Findik

  18. WEAR PROPERTIES OF MAGNESIUM MATRIX COMPOSITES REINFORCED WITH SiO2 PARTICLES

    Article • Industrial Lubrication and Tribology, January 2010, Emerald

    Professor Fehim Findik

  19. Utilisation of silicon rubber to characterise tool surface quality during die compaction

    Article • Powder Metallurgy, September 2009, Taylor & Francis

    Dr Wei Li, Professor Fehim Findik

  20. Tool life performance of multilayer hard coatings produced by HTCVD for machining of nodular cast iron

    Article • International Journal of Refractory Metals and Hard Materials, November 2008, Elsevier

    Professor Fehim Findik

  21. Effect of cutting speed on the performance of coated and uncoated cutting tools in turning nodular cast iron

    Article • Journal of Materials Processing Technology, August 2008, Elsevier

    Professor Fehim Findik

  22. Performance improvement of Al‐alloyed materials via plasma spray coating

    Article • Industrial Lubrication and Tribology, February 2008, Emerald

    Professor Fehim Findik

  23. Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti–6Al–4V and Al plates

    Article • International Journal of Impact Engineering, August 2007, Elsevier

    Professor Fehim Findik

  24. The wear behaviour investigation of sliding bearings with a designed testing machine

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Fehim Findik

  25. Effects of various austempering temperatures on fatigue properties in ductile iron

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Fehim Findik

  26. Boric acid effect in phenolic composites on tribological properties in brake linings

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Fehim Findik

  27. Compressive Behavior of Al2O3—SiC Ceramic Composite Foams Fabricated by Decomposition of Aluminum Sulfate Aqueous Solution

    Article • Journal of Composite Materials, August 2006, SAGE Publications

    Professor Fehim Findik

  28. Tribological properties of some phenolic composites suggested for automotive brakes

    Article • Tribology International, April 2006, Elsevier

    Professor Fehim Findik

  29. An investigation of different ceramic coating thermal properties

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Fehim Findik

  30. The design and service behaviour investigation of heat treatment baskets

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Fehim Findik

  31. Joining of titanium/stainless steel by explosive welding and effect on interface

    Article • Journal of Materials Processing Technology, November 2005, Elsevier

    Professor Fehim Findik

  32. Three types of ceramic coating applicability in automotive industry for wear resistance purpose

    Article • Industrial Lubrication and Tribology, August 2005, Emerald

    Professor Fehim Findik

  33. Examination of copper/stainless steel joints formed by explosive welding

    Article • Materials & Design (1980-2015), January 2005, Elsevier

    Professor Fehim Findik

  34. Tribological studies of ZrO2‐implanted on stainless steel substrate

    Article • Industrial Lubrication and Tribology, December 2004, Emerald

    Professor Fehim Findik

  35. Effects of various parameters on dynamic characteristics in adhesively bonded joints

    Article • Materials Letters, November 2004, Elsevier

    Professor Fehim Findik

  36. The influence of some factors on steel/steel bonding quality on there characteristics of explosive welding joints

    Article • Journal of Materials Science, November 2004, Springer Science + Business Media

    Professor Fehim Findik

  37. Investigation of mechanical and physical properties of several industrial rubbers

    Article • Materials & Design (1980-2015), June 2004, Elsevier

    Professor Fehim Findik

  38. The Wear Behaviour of Dual Ceramic Particles (Al2O3/SiC) Reinforced Aluminium Matrix Composites

    Article • Key Engineering Materials, May 2004, Trans Tech Publications

    Professor Fehim Findik

  39. A Comparative Study of Adhesively Bonded Composite Patch

    Article • Science and Engineering of Composite Materials, January 2004, De Gruyter

    Professor Fehim Findik

  40. Investigation of explosive welding parameters and their effects on microhardness and shear strength

    Article • Materials & Design (1980-2015), December 2003, Elsevier

    Professor Fehim Findik

  41. Microstructure, hardness and electrical properties of silver-based refractory contact materials

    Article • Materials & Design (1980-2015), October 2003, Elsevier

    Professor Fehim Findik

  42. An investigation of the factors affecting the design of drum dryers

    Article • Materials & Design (1980-2015), October 2003, Elsevier

    Professor Fehim Findik

  43. Evaluation of handling results of various materials using a non‐contact end‐effector

    Article • Industrial Robot the international journal of robotics research and application, August 2003, Emerald

    Professor Fehim Findik

  44. Ballistic impact efficiency of polymer composites

    Article • Composite Structures, August 2003, Elsevier

    Professor Fehim Findik

  45. Comparative study of wear mechanism of surface treated AISI 316L stainless steel

    Article • Industrial Lubrication and Tribology, April 2003, Emerald

    Professor Fehim Findik

  46. Friction and wear behaviour of implanted AISI 316L SS and comparison with a substrate

    Article • Materials & Design (1980-2015), October 2002, Elsevier

    Professor Fehim Findik

  47. Modulated Structures in Cu-32Ni-3Cr and Cu-46Ni-17Cr Alloys

    Article • Canadian Metallurgical Quarterly, September 2002, Taylor & Francis

    Professor Fehim Findik

  48. Ballistic impact performance of composite structures

    Article • Composite Structures, April 2002, Elsevier

    Professor Fehim Findik

  49. The Structural Features of Glass Fibre Reinforced Polyester Matrix Composites

    Article • Science and Engineering of Composite Materials, January 2002, De Gruyter

    Professor Fehim Findik

  50. Strain monitoring in composite patched structures

    Article • Composite Structures, July 2000, Elsevier

    Professor Fehim Findik

  51. Morphological changes and hardness evolution in Cu–30Ni–5Cr and Cu–45Ni–15Cr spinodal alloys

    Article • Materials Science and Technology, May 1993, Maney Publishing

    Professor Fehim Findik

  52. Sidebands in spinodal Cu-Ni-Cr alloys and lattice parameters inquiries

    Article • Journal of Materials Science Letters, March 1993, Springer Science + Business Media

    Professor Fehim Findik

  53. Observations on particle size/spacing relationships and phase equilibria in the Cu-Ni-Cr system

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Professor Fehim Findik

  54. Microstructure and hardness development in Cu–30Ni–2·5Cr and Cu–45Ni–10Cr spinodal alloys

    Article • Materials Science and Technology, March 1992, Maney Publishing

    Professor Fehim Findik