All Stories

  1. A Nonintrusive Magnetically Coupled Sensor for Measuring Liquid Level
  2. Measurement of Conductivity and Liquid Fill in Partially Filled Pipe Using Capacitive-Coupled Noncontact Probe
  3. A Noncontact Angle Sensor Based on Eddy Current Technique
  4. A Membrane-Potentiometer-Based Palpation Position Sensor Suitable for Ophthalmic Anesthesia Training
  5. Simultaneous Detection of Defect and Lift-off Using a Modified Pulsed Eddy Current Probe
  6. A Sensor System to Assess the Ocular Digital Massage in an Ophthalmic Anaesthesia Training System
  7. Improved Capacitive Sensor for Combined Angular and Linear Displacement Sensing
  8. Development of a Nonintrusive True-RMS AC Voltage Measurement Probe
  9. An Extended Study on an Interference-Insensitive Switched Capacitor CDC
  10. Sensor System to Aid the Vehicle Alignment for Inductive EV Chargers
  11. Conductivity Measurement Using Non-Contact Potential Electrodes and a Guard Ring
  12. A Dual Slope LVDT-to-Digital Converter
  13. A Linear Differential Inductive Displacement Sensor With Dual Planar Coils
  14. A Flexible, Planar-Coil-Based Sensor for Through-Shaft Angle Sensing
  15. Magnetic-Capacitive Wear Debris Sensor Plug for Condition Monitoring of Hydraulic Systems
  16. Self-Balancing Signal Conditioning Circuit for a Floating-Wiper Resistive Displacement Sensor
  17. A Robust Switched-Capacitor CDC
  18. Design and Development of a New Non-Contact Inductive Displacement Sensor
  19. An Efficient Digital Converter for a Non-Contact Inductive Displacement Sensor
  20. Design and Analysis of a Relaxation Oscillator-Based Interface Circuit for LVDT
  21. Advances in Capacitive, Eddy Current, and Magnetic Displacement Sensors and Corresponding Interfaces
  22. New Trends in Smart Sensors for Industrial Applications—Part II
  23. Improved Single-Element Resistive Sensor-to-Microcontroller Interface
  24. New Trends in Smart Sensors for Industrial Applications - Part I
  25. Design and Development of a Planar Linear Variable Differential Transformer for Displacement Sensing
  26. A Resistive Sensor Readout Circuit With Intrinsic Insensitivity to Circuit Parameters and Its Evaluation
  27. A Novel Closed-Loop SC Capacitance-to-Frequency Converter with High Linearity
  28. A novel variable reluctance-hall effect transduction technique based displacement sensor
  29. A simple and efficient oscillator based read-out scheme for LVDT
  30. A wide range planar coil based displacement sensor with high sensitivity
  31. An FFT based readout scheme for passive LC sensors
  32. An efficient digitizer for non-intrusive ac voltage measurement
  33. An intelligent mannequin based system with real-time view of regional ophthalmic blocks
  34. Non-contact inductive displacement-to-digital converter
  35. Self-Balancing Signal Conditioning Circuit for a Novel Noncontact Inductive Displacement Sensor
  36. A Resistance-to-Digital Converter Designed for High Power-line Interference Rejection Capability
  37. A Linearizing Digitizer for Wheatstone Bridge Based Signal Conditioning of Resistive Sensors
  38. A Switched-Capacitor Circuit Based Digitizer for Efficient Interfacing of Parallel R-C Sensors
  39. A Wide-Range Capacitive Sensor for Linear and Angular Displacement Measurement
  40. An Efficient Readout Scheme for Simultaneous Measurement From Multiple Wireless Passive LC Sensors
  41. Combined Variable Reluctance-Hall Effect Displacement Sensor
  42. Automatic flipping magnet type electromagnetic energy harvester
  43. An Easy-to-Interface CDC With an Efficient Automatic Calibration
  44. An Improved Direct Digital Converter for Bridge-Connected Resistive Sensors
  45. A Resistance-to-Digital Converter possessing exceptional insensitivity to circuit parameters
  46. A direct-digital interface circuit for sensors representable using parallel R-C model
  47. A floating wiper inductive voltage divider type displacement transducer
  48. A Novel GMR-Based Eddy Current Sensing Probe With Extended Sensing Range
  49. A modified RDC with an auto-adjustable SC source enabled auto-calibration scheme
  50. Capacitance-to-digital converter for leaky capacitive sensors
  51. Sigma–Delta Digital Converter Suitable for a Resistive Displacement Sensor With a Floating Slide
  52. A Linear and High Sensitive Interfacing Scheme for Wireless Passive LC Sensors
  53. Evaluation of an Ophthalmic Anesthesia Simulation System for Regional Block Training
  54. An Improved Capacitance-to-Digital Converter for Leaky Capacitive Sensors
  55. Assay of a Resistive Displacement Transducer With a Floating Wiper
  56. Digital Converter for a Contactless Displacement Sensor
  57. A Multi-Electrode Electric Field Based Sensing System For Ophthalmic Anesthesia Training
  58. A novel switched-capacitor capacitance-to-digital converter for single element capacitive sensors
  59. A simple measurement scheme for multiple capacitors and its application to an ophthalmic anesthesia training system
  60. A simple microcontroller based digitizer for differential inductive sensors
  61. Capacitive tactile sensor with slip detection capabilities for robotic applications
  62. Feasibility study of a non-contact AC voltage measurement system
  63. Signal conditioning of a resistive potentiometric displacement sensor with a floating slide
  64. A Direct Digital Readout Circuit for Impedance Sensors
  65. A novel low-cost capacitive tactile sensor
  66. Packaging and evaluation of an online tool for locating metal shrapnel during surgery
  67. Automated fault diagnosis in Multiple Inductive Loop Detectors
  68. A modified Direct Digital Converter for resistive sensors in bridge form
  69. A New Inductive Proximity Sensor Based Guiding Tool to Locate Metal Shrapnel During Surgery
  70. Simulation study of a contactless, capacitive ECG system
  71. Mutually coupled multiple inductive loop system suitable for heterogeneous traffic
  72. Analysis of a tunnelling magneto-resistance-based angle transducer
  73. Locating metal shrapnel in human body using GMR sensors
  74. Design and Analysis of a Dual-Slope Inductance-to-Digital Converter for Differential Reluctance Sensors
  75. A Linearizing Digitizer for Differential Sensors With Polynomial Characteristics
  76. An Ophthalmic Anesthesia Training System Using Integrated Capacitive and Hall Effect Sensors
  77. A simple signal conditioning scheme for inductive sensors
  78. A resistive potentiometric type transducer with contactless slide
  79. A GMR sensor based guiding tool for location of metal shrapnel during surgery
  80. A direct-digital converter for resistive sensor elements in bridge configuration
  81. An Efficient Multiple-Loop Sensor Configuration Applicable for Undisciplined Traffic
  82. A PC based hysteresis loop extractor and its applications
  83. An efficient capacitive sensing scheme for an ophthalmic regional anesthesia training system
  84. A syringe injection rate detector employing a dual Hall-effect sensor configuration
  85. Novel method for the in situ measurement of the temperature of a satellite's solar panel
  86. New Signal Conditioning Circuit for MR Angle Transducers With Full-Circle Range
  87. Dual-Slope Inductance-to-Digital Converter for differential reluctance sensors
  88. An intelligent ophthalmic regional anesthesia training system based on capacitive sensing
  89. A simple analog front-end circuit for grounded capacitive sensors with offset capacitance
  90. A reluctance-Hall Effect based linear digital angle sensor
  91. A new inductive proximity sensor as a guiding tool for removing metal shrapnel during surgery
  92. A child-left-behind warning system based on capacitive sensing principle
  93. Multiple inductive loop detectors for intelligent transportation systems applications: Ramp metering, vehicle re-identification and lane change monitoring systems
  94. A new variable reluctance-Hall Effect based angle sensor
  95. A Hall Effect sensor based syringe injection rate detector
  96. A combined electrostatic-triboelectric vibration energy harvester
  97. A capacitive ice layer detection system suitable for autonomous inspection of runways using an ROV
  98. Application of random forest algorithm to classify vehicles detected by a multiple inductive loop system
  99. A portable pedometer based on inductive proximity
  100. Electronic Scheme for Computing Inverse-Cosine and its Application to a GMR Based Angle Sensor
  101. An innovative method for determining the junction temperature of a photovoltaic cell
  102. A novel signal conditioning scheme for magneto-resistive angle sensors
  103. A Multiple Inductive Loop Vehicle Detection System for Heterogeneous and Lane-Less Traffic
  104. A magnetically coupled inductive loop sensing system for less-lane disciplined traffic
  105. A linear Tunneling Magneto-Resistance angle transducer
  106. Tunneling magneto-resistor based angle transducer
  107. A simple multiple loop sensor configuration for vehicle detection in an undisciplined traffic
  108. A capacitive array sensing based training system for ophthalmic anesthesia
  109. Virtual instrument to measure the magnetic properties of annealed components
  110. A novel method for the measurement of oxygen saturation in arterial blood
  111. A multiple loop vehicle detection system for heterogeneous and lane-less traffic
  112. Precision measurement of humidity dependent permittivity of foams
  113. Analysis of the Switched-Capacitor Dual-Slope Capacitance-to-Digital Converter
  114. A Novel Dual-Slope Resistance-to-Digital Converter
  115. A Combined Inductive–Capacitive Proximity Sensor for Seat Occupancy Detection
  116. Robust sensing of human proximity for safety applications
  117. Use of Fourier Series Analysis for Motion Artifact Reduction and Data Compression of Photoplethysmographic Signals
  118. Seat Occupancy Detection Based on Capacitive Sensing
  119. Novel switched-capacitor dual slope capacitance to digital converter for differential capacitive sensors
  120. Icing detector for overhead power transmission lines
  121. Analysis of a Sigma–Delta Resistance-to-Digital Converter for Differential Resistive Sensors
  122. A Novel Calibration-Free Method of Measurement of Oxygen Saturation in Arterial Blood
  123. A combined inductive-capacitive proximity sensor and its application to seat occupancy sensing
  124. A warning system for chainsaw personal safety based on capacitive sensing
  125. Motion Artifact Reduction and Data Compression of Photoplethysmo-graphic Signals utilizing Cycle by Cycle Fourier Series Analysis
  126. A Sigma-Delta Resistance to Digital Converter Suitable for Differential Resistive Sensors
  127. A Novel Seat Occupancy Detection System based on Capacitive Sensing
  128. A Novel Method of Measurement of Oxygen Saturation in Arterial Blood
  129. A Linear Variable Differential Capacitive Transducer for Sensing Planar Angles
  130. Switched Capacitor Signal Conditioning for Differential Capacitive Sensors
  131. Virtual Instrument for the Measurement of Haemo-dynamic Parameters Using Photoplethysmograph
  132. Virtual Instrument for Testing of Current and Voltage Transformers
  133. A Linear Variable Differential Capacitive Transducer for Sensing Planar Angles
  134. Switched capacitor triple slope capacitance to digital converter