All Stories

  1. Load Spectrum Compiling and Fatigue Life Estimation of the Automobile Wheel Hub

    Article • Recent Patents on Mechanical Engineering, August 2021, Bentham Science Publishers

    Dr Xintian Liu

  2. Numerical Method for Fatigue Life of Aircraft Lugs Under Thermal Stress

    Article • Journal of Aircraft, July 2020, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Xintian Liu, Y. S. Wang

  3. Fatigue life analysis of automotive key parts based on improved peak-over-threshold method

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2020, Wiley

    Dr Xintian Liu

  4. Firewater Monitor Trajectories Based on Jet Expansion and Dynamic Breakup Model

    Article • Journal of Testing and Evaluation, February 2020, ASTM International

    Dr Xintian Liu

  5. A modified strength degradation model of 45 steel under cyclic loading

    Article • Australian Journal of Mechanical Engineering, December 2019, Taylor & Francis

    Dr Xintian Liu

  6. Reliability reallocation for cost uncertainty of fuel cell vehicles via improved differential evolution algorithm

    Article • Quality and Reliability Engineering International, October 2019, Wiley

    Dr Xintian Liu

  7. Fatigue life prediction of clutch sleeve based on abrasion mathematical model in service period

    Article • Fatigue & Fracture of Engineering Materials & Structures, September 2019, Wiley

    Dr Xintian Liu

  8. Numerical method for estimating fatigue crack initiation size using elastic–plastic fracture mechanics method

    Article • Applied Mathematical Modelling, September 2019, Elsevier

    Dr Xintian Liu

  9. Tolerance analysis and evaluation of uncertain automatic battery replacement system

    Article • Structural and Multidisciplinary Optimization, August 2019, Springer Science + Business Media

    Dr Xintian Liu

  10. Evaluation of regenerative braking based on single-pedal control for electric vehicles

    Article • Frontiers of Mechanical Engineering, July 2019, Springer Science + Business Media

    Dr Xintian Liu

  11. Prediction of material fatigue parameters for low alloy forged steels considering error circle

    Article • International Journal of Fatigue, April 2019, Elsevier

    Dr Xintian Liu

  12. Analysis and evaluation of electromagnetic vibration and noise in permanent magnet synchronous motor with rotor step skewing

    Article • Science China Technological Sciences, March 2019, Springer Science + Business Media

    Dr Xintian Liu

  13. Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system

    Article • International Journal of Heat and Mass Transfer, March 2019, Elsevier

    Dr Xintian Liu

  14. Load spectrum for automotive wheels hub based on mixed probability distribution model

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, February 2019, SAGE Publications

    Dr Xintian Liu

  15. A cubic quality loss function and its applications

    Article • Quality and Reliability Engineering International, February 2019, Wiley

    Dr Xintian Liu

  16. Fire Water Monitor Trajectories Based on Turbulence Breakup Model

    Article • Journal of Testing and Evaluation, January 2019, ASTM International

    Dr Xintian Liu

  17. Reliability analysis and evaluation of automotive seat angle-adjuster

    Article • Australian Journal of Mechanical Engineering, December 2018, Taylor & Francis

    Dr Xintian Liu

  18. Calibration and optimization of an electric vehicle powertrain system

    Article • Journal of the Chinese Institute of Engineers, October 2018, Taylor & Francis

    Dr Xintian Liu, Y. S. Wang

  19. Parameter distribution characteristics of material fatigue life using improved bootstrap method

    Article • International Journal of Damage Mechanics, August 2018, SAGE Publications

    Dr Xintian Liu

  20. Analysis and evaluation of the leakage failure for clutch sleeve and shell

    Article • Engineering Failure Analysis, June 2018, Elsevier

    Dr Xintian Liu

  21. Research on Random Load Characteristic Based on Mixture Distribution Model

    Article • Journal of Testing and Evaluation, May 2018, ASTM International

    Dr Xintian Liu

  22. Hidden quality cost function of a product based on the cubic approximation of the Taylor expansion

    Article • International Journal of Production Research, April 2018, Taylor & Francis

    Dr Xintian Liu

  23. Research on Load Spectrum Construction of Bench Test Based on Automotive Proving Ground

    Article • Journal of Testing and Evaluation, December 2017, ASTM International

    Dr Xintian Liu

  24. Universal Grey System Theory for Analysis of Uncertain Structural Systems

    Article • AIAA Journal, November 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Xintian Liu

  25. Research on Load-Spectrum Construction of Automobile Key Parts Based on Monte Carlo Sampling

    Article • Journal of Testing and Evaluation, October 2017, ASTM International

    Dr Xintian Liu

  26. Probabilistic modeling of unified S-N curves for mechanical parts

    Article • International Journal of Damage Mechanics, July 2017, SAGE Publications

    Dr Xintian Liu

  27. Fatigue Test Analysis of Automotive Key Parts Based on Censored Data and Small Sample Setting

    Article • Quality and Reliability Engineering International, October 2016, Wiley

    Dr Xintian Liu

  28. Research on assembly tolerance allocation and quality control based on fuzzy reliability

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, August 2016, SAGE Publications

    Dr Xintian Liu

  29. Reliability analysis on the drive system of a gear-type oil pump with variable displacement

    Article • Advances in Mechanical Engineering, March 2016, SAGE Publications

    Dr Xintian Liu, Y. S. Wang

  30. Durability Testing Method of a Hub-Reducer System Based on the Shanghai Standard Road Driving Cycle

    Article • Journal of Testing and Evaluation, July 2015, ASTM International

    Dr Xintian Liu

  31. Reliability Analysis and Evaluation of Key Parts for Automobiles on the Basis of Dimensional Changes During High-Speed Operation

    Article • Journal of Testing and Evaluation, June 2015, ASTM International

    Dr Xintian Liu, Jiao Luo, Y. S. Wang

  32. Reliability Analysis and Evaluation of Differential System Based on low Load Strengthening Model

    Article • Quality and Reliability Engineering International, March 2015, Wiley

    Dr Xintian Liu

  33. Hardpoint correlation analysis and optimal design for front suspension of a Formula SAE car

    Article • Australian Journal of Mechanical Engineering, January 2015, Taylor & Francis

    Dr Xintian Liu

  34. Reliability Analysis of Multiple Causes of Failure in Presence of Independent Competing Risks

    Article • Quality and Reliability Engineering International, December 2014, Wiley

    Dr Xintian Liu

  35. Reliability Reallocation for Fuel Cell Vehicles Based on Genetic Algorithm

    Article • Quality and Reliability Engineering International, June 2014, Wiley

    Dr Xintian Liu

  36. STATISTICAL RELIABILITY ANALYSIS FOR FUEL CELL VEHICLE BASED ON FIELD TEST DATA

    Article • International Journal of Reliability Quality and Safety Engineering, June 2014, World Scientific Pub Co Pte Lt

    Dr Xintian Liu

  37. An intelligent approach for engine fault diagnosis based on Hilbert–Huang transform and support vector machine

    Article • Applied Acoustics, January 2014, Elsevier

    Dr Xintian Liu

  38. Reliability Analysis and Evaluation of Automobile Welding Structure

    Article • Quality and Reliability Engineering International, July 2013, Wiley

    Dr Xintian Liu

  39. The Analysis of Structural Strength of UD Clutch Hub Assembly

    Article • Applied Mechanics and Materials, February 2013, Trans Tech Publications

    Dr Xintian Liu

  40. Influence of Inner Rubber Bushing Stiffness of the Lateral Rod on Rear Multi-Link Suspension Performance

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Dr Xintian Liu

  41. Optimization Design of Double Wishbone Independent Suspension Based on ADAMS

    Article • Applied Mechanics and Materials, November 2011, Trans Tech Publications

    Dr Xintian Liu

  42. A model of cumulative fatigue strengthening effect due to coaxing

    Article • Fatigue & Fracture of Engineering Materials & Structures, October 2011, Wiley

    Dr Xintian Liu

  43. Influence of Outer Rubber Bushing Stiffness of the under Control Arm on Multi-Link Independent Suspension Performance

    Article • Applied Mechanics and Materials, March 2011, Trans Tech Publications

    Dr Xintian Liu

  44. Influence of Outer Rubber Bushing Stiffness of the Lateral Rod on Multi-Link Independent Suspension Performance

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Dr Xintian Liu

  45. The Nonlinear Finite Element Analysis and Experimental Study of Rubber Bushing

    Article • January 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  46. Research on Modeling Method for Static Strength FEA of Automobile Seat Recliner Assembly

    Article • January 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  47. Influence of Outer Rubber Bushing Stiffness of the Under Control Arm on Multi-link Independent Suspension Performance

    Article • January 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  48. Cumulative Strengthening Effect Model Based on the Low-amplitude Training Load

    Article • Journal of Mechanical Engineering, January 2011, Chinese Journal of Mechanical Engineering

    Dr Xintian Liu

  49. A Vibro-Acoustic Coupling Analysis of Bus Passenger Compartment Based on the Finite Element Method

    Article • May 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  50. Studying on Computational Method for Probability Distribution of Creep Failure Data under High Temperature

    Article • March 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  51. Failure Analysis and Redesign of Coach Seat Recliner Based on FEM

    Article • March 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  52. Influence of Front Double Wishbone Independent Suspension Performance on Front Rubber Bushing Stiffness of Lower Control Arm

    Article • March 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  53. Study on Measurement System of the Dynamic Performances for an Electronic Fuel Injector

    Article • March 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  54. The Analysis of the Distribution of the Failure Statistical Data Hydrogen-Adjacent Pipelines

    Article • Advanced Materials Research, March 2010, Trans Tech Publications

    Dr Xintian Liu

  55. An Efficient Sampling Method for the Actual Reliability of Engineering Calculation and Design

    Article • Advanced Materials Research, March 2010, Trans Tech Publications

    Dr Xintian Liu

  56. The analysis of front rail crash on mini-bus chassis

    Article • February 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  57. Performance Analysis of Rear Rubber Bushing Stiffness of Lower Control Arm on Front Double Wishbone Independent Suspension

    Article • January 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  58. FEA and optimum of twin seat underframe in motor train unit

    Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  59. Performance analysis of front rubber bushing stiffness of lower control arm on McPherson Suspension

    Article • October 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  60. Analysis of three-people seat underframe in motor train unit based on FEA and experiment

    Article • August 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  61. Simulation research on structural strength of the hub plate

    Article • February 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  62. The Random Thermal Analysis with Universal Grey Number in the Electronics

    Article • January 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  63. The Finite Element Method Appling in the Flow Forming

    Article • January 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  64. Improvement and Light Weight of Twin Seat Underframe in Multiple Unit Train

    Article • January 2009, Springer Science + Business Media

    Dr Xintian Liu

  65. Short-Term Traffic Flow Prediction Methods and the Correlation Analysis of Vehicle Speed and Traffic Flow

    Article • December 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Xintian Liu

  66. Application of Flow Forming on Developing New Generation of GM GF6 Product

    Article • April 2008, World Scientific Pub Co Pte Lt

    Dr Xintian Liu

  67. The checkout and forecast for the product performance online

    Article • January 2006, the Institution of Engineering and Technology (the IET)

    Dr Xintian Liu

  68. Fatigue Life Study of Bogie Framework Welding Seam by Finite Element Analysis Method

    Article • Springer Science + Business Media

    Dr Xintian Liu

  69. Low Circle Fatigue Life Model Based on ANFIS

    Article • Springer Science + Business Media

    Dr Xintian Liu