All Stories

  1. Phase transformations in novel hot-deformed Al–Zn–Mg–Cu–Si–Mn–Fe(–Sc–Zr) alloys
  2. Co-evolution of vacancies and solute clusters during artificial ageing of Al-Mg-Si alloys
  3. Structure and Properties of High-Strength Ti Grade 4 Prepared by Severe Plastic Deformation and Subsequent Heat Treatment
  4. Clustering phenomena in quenched Al, Al–Mg, Al–Si and Al–Mg–Si alloys
  5. Microstructure and Mechanical Properties of Sintered and Heat-Treated HfNbTaTiZr High Entropy Alloy
  6. The Effect of Processing Route on Properties of HfNbTaTiZr High Entropy Alloy
  7. The role of open-volume defects in the annihilation of antisites in a B2-ordered alloy
  8. Lattice defects in severely deformed biomedical Ti-6Al-7Nb alloy and thermal stability of its ultra-fine grained microstructure
  9. Microstructure and Room Temperature Mechanical Properties of Different 3 and 4 Element Medium Entropy Alloys from HfNbTaTiZr System
  10. Defects in the high entropy alloy HfNbTaTiZr prepared by spark plasma sintering
  11. Effect of secondary phase particles on thermal stability of ultra-fine grained Mg-4Y-3RE alloy prepared by equal channel angular pressing
  12. Heat treatment and age hardening of Al–Si–Mg–Mn commercial alloy with addition of Sc and Zr
  13. Precipitation of Zinc Oxide Nanoparticles Under UV-Irradiation
  14. Characterization of defects in titanium created by hydrogen charging
  15. Nanocrystalline aluminium particles inside Mg-4Li-4Al-2RE magnesium alloy after severe plastic deformation
  16. In-situ characterization of hydrogen-induced defects in palladium by positron annihilation and acoustic emission
  17. Structural stability of ultra-fine grained magnesium alloys processed by equal channel angular pressing
  18. Structural stability of ultra-fine grained magnesium alloys processed by equal channel angular pressing
  19. Hydrogen absorption in Mg-Gd alloy
  20. Study of Defects in High Energy Ion Implanted ZnO Crystals
  21. Characterisation of Porosity in Zirconia-Based Nanopowders
  22. Hydrogen-Induced Defects in Titanium
  23. Effect of hydrogen on Fe and Pd alloying and physical properties
  24. Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production
  25. Corrigendum to “Mechanical stress and stress release channels in 10–350 nm palladium hydrogen thin films with different micro-structures” [Acta Mater. 114 (2016) 116–125]
  26. Point defects in ZnO crystals grown by various techniques
  27. Positron annihilation study of cavities in black Au films
  28. Mechanical stress and stress release channels in 10–350 nm palladium hydrogen thin films with different micro-structures
  29. Adding Li to AE42 magnesium alloy supressed the typical texture development after ECAP.
  30. Positron annihilation spectroscopy of vacancy-related defects in CdTe:Cl and CdZnTe:Ge at different stoichiometry deviations
  31. Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation
  32. Characterisation of irradiation-induced defects in ZnO single crystals
  33. Defect studies of Mg films deposited on various substrates
  34. Defect studies of zirconia implanted by high energy Xe ions
  35. Early stages of precipitation in Mg-RE alloys studied by positron annihilation spectroscopy
  36. Effects in Mg-Zn-based alloys strengthened by quasicrystalline phase
  37. Spatial distribution of defects in ultra fine grained copper prepared by high pressure torsion
  38. Ultra fine grained Ti prepared by severe plastic deformation
  39. Defect Recovery in Severely Deformed Ferrite Lamellae During Annealing and Its Impact on the Softening of Cold-Drawn Pearlitic Steel Wires
  40. Structural and compositional stability of the mechanically alloyed (Fe, Mo)-Al at elevated temperatures
  41. Influence of microstructure and mechanical stress on behavior of hydrogen in 500nm Pd films
  42. Stress release during cyclic loading of 20nm palladium films
  43. Investigation of nanocrystalline Gd films loaded with hydrogen
  44. Effect of hydrogen on generation of lattice defects in shock-loaded Pd
  45. Defect studies of H+ implanted niobium
  46. Hydrogen-induced defects and multiplication of dislocations in Palladium
  47. Hydrogen-Induced Hardening in Palladium
  48. The Effect of Heat Treatment on Morphology and Phase Composition of Grain Boundary Phases in Mg-Zn-Y-Nd-Zr
  49. Hydrogen Trapping at Defects in Pd and Thermally Activated Desorption
  50. Natural ageing in MgGg alloys
  51. Characterisation of Defects in ZnO Implanted by Hydrogen
  52. Hydrogen-Induced Buckling of Pd Films Deposited on Various Substrates
  53. Origin of green luminescence in hydrothermally grown ZnO single crystals
  54. Early stages of solute clustering in an Al–Mg–Si alloy
  55. Structure and mechanical properties of Al–Si–Fe alloys prepared by short-term mechanical alloying and spark plasma sintering
  56. Positive effect of hydrogen-induced vacancies on mechanical alloying of Fe and Al
  57. Early Stages of Precipitation Process in Al-(Mn-)Sc-Zr Alloy Characterized by Positron Annihilation
  58. Positron annihilation study of vacancy-type defects in Al single crystal foils with the tweed structures across the surface
  59. Effect of Hydrogen on Formation of Fe-Al Nanoparticles by Mechanical Milling
  60. Microstructure evolution in solution treated Ti15Mo alloy processed by high pressure torsion
  61. Modification of steel surfaces induced by turning: non-destructive characterization using Barkhausen noise and positron annihilation
  62. Structural and magnetic relaxations of mechanically alloyed Fe–Mo
  63. Microstructure and mechanical properties of ultra-fine grained AZ31 alloy processed by equal channel angular pressing
  64. Effect of annealing on point defect population in cold-drawn pearlitic steel wires
  65. Microstructure evolution in ultrafine-grained interstitial free steel processed by high pressure torsion
  66. Microstructure stability of ultra-fine grained magnesium alloy AZ31 processed by extrusion and equal-channel angular pressing (EX–ECAP)
  67. A Positron Study of Early Clustering in Al-Mg-Si Alloys
  68. Microstructure and Defect Structure Evolution in Ultra-Fine Grained MgAlZn Alloy
  69. Investigation of H + implanted Fe-Al alloys
  70. Sintering of zirconia-based nanomaterials studied by variable-energy slow-positron beam
  71. Structural studies of thin Pd films loaded with hydrogen
  72. Structural studies of thin Mg films
  73. Positron annihilation in flight: experiment with slow and fast positrons
  74. Defects and Sintering-Induced Diffusion Processes in Yttria-Stabilised Zirconia Nanomaterials Studied by Positron Annihilation Spectroscopy
  75. Stress release and defect occurrence in V1−xFex films upon hydrogen loading: H-induced superabundant vacancies, movement and creation of dislocations
  76. Hydrogen-Induced Defects in Palladium
  77. Vickers Hardness and Positron Annihilation Study of Eurofer97 and ODS Eurofer
  78. Precipitation Effects in Mg-Zn Alloys Studied by Positron Annihilation and Hardness Testing
  79. Investigation of Precipitation Effects in Mg-Tb and Mg-Tb-Nd Alloys
  80. Defects Studies of ZnO Single Crystals Prepared by Various Techniques
  81. Defects in Zirconia Nanomaterials Doped with Rare-Earth Oxides
  82. Kuznets Inverted U-Curve Hypothesis Examined on Up-To Date Observations for 145 Countries
  83. Positron annihilation study on deformation-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys
  84. Positron Annihilation Study of Zirconia Nanopowders and Nanoceramics Stabilized by Magnesia and Ceria
  85. Diffusion Processes in the Sintering of Zirconia-Based Nanomaterials
  86. Hydrogen Interaction with Defects in Nanocrystalline, Polycrystalline and Epitaxial Pd Films
  87. Hydrogen absorption and diffusivity in ZnO single crystals
  88. Hydrogen absorption in thin ZnO films prepared by pulsed laser deposition
  89. Hydrogen-induced microstructural changes of Pd films
  90. Solid-state reactions during mechanical milling of Fe–Al under nitrogen atmosphere
  91. Vacancy clusters in ultra fine grained metals prepared by severe plastic deformation
  92. Vacancy-induced hardening in Fe-Al alloys
  93. Software for analysis of waveforms acquired by digital Doppler broadening spectrometer
  94. Defect studies of ZnO films prepared by pulsed laser deposition on various substrates
  95. Positron annihilation studies of zirconia doped with metal cations of different valence
  96. Mechanical Properties and Dislocation Structure Evolution in Ti6Al7Nb Alloy Processed by High Pressure Torsion
  97. Defects in Carbon-Rich Ferrite of Cold-Drawn Pearlitic Steel Wires
  98. Mechanical properties and microstructure evolution in ultrafine-grained AZ31 alloy processed by severe plastic deformation
  99. Diffusion Processes in Early Stages of Precipitation in Mg-Gd and Mg-Tb Alloys
  100. Anisotropy of Hydrogen Diffusivity in ZnO
  101. Positron Annihilation at Planar Defects in Oxides
  102. Effect of Water on the Size Distribution of Free-Volume Holes in Nafion Membrane
  103. Effect of Sintering on Defects in Yttria Stabilised Zirconia
  104. Inhibition of Positronium Formation in Yttria Stabilized Zirconia Nanopowders Modified by Addition of Chromia
  105. Hydrogen Interaction with Defects in ZnO
  106. On X-Ray Diffraction Study of Microstructure of ZnO Thin Nanocrystalline Films with Strong Preferred Grain Orientation
  107. Low Background Digital Coincidence Spectrometer – A Tool for Investigation of Positron Annihilation in Flight
  108. Characterization of H-Plasma Treated ZnO Crystals by Positron Annihilation and Atomic Force Microscopy
  109. Structural Studies of Nanocrystalline Thin Pd Films Electrochemically Doped with Hydrogen
  110. Defect Behaviour in Yttria-Stabilised Zirconia Nanomaterials Studied by Positron Annihilation Techniques
  111. Natural aging of Mg-Gd and Mg-Tb alloys
  112. Effect of natural irradiation in fluorites: possible implications for nuclear waste management?
  113. Characterization of quenched-in vacancies in Fe–Al alloys
  114. Structural characterization of ZnO thin films grown on various substrates by pulsed laser deposition
  115. Microstructure and dislocation density evolutions in MgAlZn alloy processed by severe plastic deformation
  116. Vacancy-like defects associated with icosahedral phase in Mg–Y–Nd–Zr alloys modified by the addition of Zn
  117. Diffusivity of Hydrogen in ZnO Single Crystal
  118. Investigation of positron annihilation-in-flight using a digital coincidence Doppler broadening spectrometer
  119. Influence of Deformation on Precipitation Kinetics in Mg-Tb Alloy
  120. Microstructure Development and Lateral Distribution of Defects in Ultra-fine Grained Copper Prepared by High-pressure Torsion
  121. Defect Studies of Yttria Stabilized Zirconia with Chromia Additive
  122. Hydrogen-Induced Plastic Deformation in ZnO
  123. Defects in Mg-Zn-Y-Nd Alloys with Icosahedral Phase
  124. Boron Enhanced Synthesis of Ti-hydride Nanoparticles by Milling Ti/B in Hydrogen Flow
  125. Phase transformations in MgTbNd alloy
  126. Homogeneity of ultrafine-grained copper deformed by high-pressure torsion characterized by positron annihilation and microhardness
  127. Thermal vacancies in Fe3Al studied by positron annihilation
  128. Achieving coherent phase transition in palladium–hydrogen thin films
  129. Quantum mechanics as applied mathematical statistics
  130. Evolution of defects in copper deformed by high-pressure torsion
  131. Characterization of microstructural defects in melt grown ZnO single crystals
  132. On the formation of vacancies in α-ferrite of a heavily cold-drawn pearlitic steel wire
  133. Microstructure characterization of rapidly solidified Al–Fe–Cr–Ce alloy by positron annihilation spectroscopy
  134. Positron annihilation study of yttria-stabilized zirconia nanopowders containing Cr 2 O 3 additive
  135. Quenched-in vacancies in Fe3Al based alloys: a positron annihilation study
  136. Structure of Rapidly Solidified Al-Fe-Cr-Ce Alloy
  137. Digital setup for Doppler broadening spectroscopy
  138. Quenched-in vacancies in Fe-Al alloys
  139. Characterization of point defects in yttria stabilized zirconia single crystals
  140. Hydrogen-induced surface modifications in ZnO single crystals
  141. Digital spectrometer for coincidence measurement of Doppler broadening of positron annihilation radiation
  142. Structural characterization of H plasma-doped ZnO single crystals by positron annihilation spectroscopies
  143. Defects in CaF2 caused by long-time irradiation and their response to annealing
  144. Positron annihilation study of vacancies in Fe–Al based alloys
  145. Investigation of hydrogen interaction with defects in zirconia
  146. Size distributions of nanoscopic holes in Ti/h-BN and Ti/B nanocomposites
  147. Defect studies of nanocrystalline zirconia powders and sintered ceramics
  148. Quenched-in vacancies in Fe-Al alloys
  149. Microstructure Development and Ductility of Ultra-Fine Grained Mg-Gd Alloy Prepared by High Pressure Torsion
  150. Hydrogen-induced defects in Pd films
  151. Sintering of yttria-stabilized zirconia nanopowders studied by positron annihilation spectroscopy
  152. Defects in fluorite structure caused by natural irradiation
  153. Multi-scale analysis of hydrogen-induced buckling in Pd films
  154. Microstructure of Equal-Channel Angular Pressed Cu and Cu-Zr Samples Studied by Different Methods
  155. Precipitation Effects in Ultra-Fine-Grained Mg–RE Alloys
  156. XRD profile analysis of ECAP Cu and Cu + Zr samples
  157. Effect of equal channel angular pressing on microstructure, texture, and high-cycle fatigue performance of wrought magnesium alloys
  158. Identification of Zn-vacancy–hydrogen complexes in ZnO single crystals: A challenge to positron annihilation spectroscopy
  159. Hydrogen-vacancy complexes in electron-irradiated niobium
  160. Divacancy-Hydrogen Complexes in Zinc Oxide
  161. Investigation of Interaction of Hydrogen with Defects in Zirconia
  162. Vacancy-Hydrogen Complexes in ZnO
  163. Structure and Positron Characteristics of Basic Open Volume Defects in Zirconia
  164. Simulation of positron annihilation response to mechanical deformation of nanostructured Ni3Al
  165. High-resolution positron lifetime measurement using ultra fast digitizers Acqiris DC211
  166. Defect studies of hydrogen-loaded nanocrystalline Gd films
  167. Hydrogen-induced buckling of Pd films studied by positron annihilation
  168. Mechanical Properties and Microstructure Development of Ultrafine-Grained Cu Processed by ECAP
  169. Microstructure Development and Precipitation Effects in Ultra Fine Grained Mg-3Tb-2Nd Alloy Prepared by High Pressure Torsion
  170. Defect studies of ZnO single crystals electrochemically doped with hydrogen
  171. The Clustering of Cu Atoms in Neutron Irradiated Reactor Pressure Vessel Steels Studied by Positron Annihilation
  172. The Enhanced Kinetics of Precipitation Effects in Ultra Fine Grained Mg Alloys Prepared by High Pressure Torsion
  173. Structural studies of submicrocrystalline copper and copper composites by different methods
  174. Hydrogen-induced defects in niobium
  175. Positron annihilation study of hydrogen trapping at open-volume defects: Comparison of nanocrystalline and epitaxial Nb thin films
  176. Defects in yttria-stabilised zirconia: a positron annihilation study
  177. Defect studies of hydrogen loaded Nb: bulk metals and thin films
  178. Defects in N+ion-implanted ZnO single crystals studied by positron annihilation and Hall effect
  179. Influence of ceramic nanoparticles on grain growth in ultra fine grained copper prepared by high pressure torsion
  180. Microstructure investigations of ultra-fine grained Mg-Gd alloys prepared by high pressure torsion
  181. Positron annihilation in three zirconia polymorphs
  182. Comparative characterization of differently grown ZnO single crystals by positron annihilation and Hall effect
  183. Microstructure and thermal stability of ultra fine grained Mg-based alloys prepared by high-pressure torsion
  184. Positron lifetimes in ZnO single crystals
  185. Influence of deformation on precipitation process in Mg–15wt.%Gd alloy
  186. Positronium yields in amorphous, cross-linked and conductive polystyrene
  187. Defect studies of hydrogen-loaded thin Nb films
  188. Defects in nanocrystalline Nb films: Effect of sputtering temperature
  189. Characterization of a SiC/SiC composite by X-ray diffraction, atomic force microscopy and positron spectroscopies
  190. Thermal development of microstructure and precipitation effects in Mg-10wt%Gd alloy
  191. Vacancy–solute complexes in aluminum
  192. Effect of the Temperature of Accumulative Roll Bonding on the Microstructure and Properties of Twin-Roll Cast AA8006 Alloy
  193. Effect of the Temperature of Accumulative Roll Bonding on the Microstructure and Properties of Twin-Roll Cast AA8006 Alloy
  194. Microstructure, Texture and Property Changes of High Purity Aluminium during Accumulative Roll Bonding and Conventional Rolling
  195. Microstructure and Thermal Stability of Ultra Fine Grained Mg-Based Alloys Prepared by High Pressure Torsion
  196. Hydrogen-induced defects in niobium studied by positron annihilation spectroscopy
  197. Study of atom diffusivity and related relaxation phenomena in Fe3Al–(Ti,Nb)–C alloys
  198. Microstructure and Thermal Stability of Ultra Fine Grained Mg and Mg-Gd Alloys Prepared by High-Pressure Torsion
  199. Positron Annihilation Studies of Microstructure of Ultra Fine Grained Metals Prepared by Severe Plastic Deformation
  200. Annealing process in quenched Al-Sn alloys: A positron annihilation study
  201. The asset of ultra-fast digitizers for positron-lifetime spectroscopy
  202. Dependence of Thermal Stability of Ultra Fine Grained Metals on Grain Size
  203. 10.4028/0-87849-348-4.125
  204. 10.4028/0-87849-348-4.117
  205. Structural investigations of submicrocrystalline metals obtained by high-pressure torsion deformation
  206. Hydrogen-induced defects in bulk niobium
  207. Theoretical Study of Positron Annihilation in Nanoclusters in Al-Cu System
  208. 2D-Coincidence Doppler Broadening Measurements on Neutron-Irradiated VVER-Type Reactor Pressure Vessel Steels
  209. Hydrogen-Induced Defects in Niobium Studied by Positron Annihilation
  210. Thermal Stability of Ultra Fine Grained Copper Prepared by High Pressure Torsion Using Various Pressures
  211. Lateral and Depth Distribution of Defects in Ultra-Fine Grained Copper Prepared by High-Pressure Torsion
  212. Spatial distribution of defects in ultra-fine grained copper prepared by high-pressure torsion
  213. Influence of Al 2 O 3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion
  214. Investigation of spatial distribution of defects in ultra-fine grained copper
  215. Positron-Lifetime Investigation of Thermal Stability of Ultra-Fine Grained Nickel
  216. TEM and PAS study of neutron irradiated VVER-type RPV steels
  217. Thermal stability of ultrafine grained copper
  218. Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion
  219. Structural Studies of Ultrafine Grained Copper Obtained by Severe Plastic Deformation
  220. Positron Lifetime Study of Polycarbonate/Poly(Styrene-co-Acrylonitrile) Blends
  221. A Method for the Absolute Differential Calibration of the Time Scale for Precise Timing Measurements
  222. Three-detector setup for positron-lifetime spectroscopy of solids containing 60Co radionuclide
  223. Using of Modified Trapping Model in Positron-Lifetime Study of Cold-Worked Aluminium
  224. Positron Lifetime Study of Reactor Pressure Vessel Steels
  225. A high-resolution BaF2 positron-lifetime spectrometer and experience with its long-term exploitation