All Stories

  1. Application of hybrid analytical hierarchy process and complex proportional assessment approach for optimal design of brake friction materials
  2. Dry Sliding Wear Behavior of Titanium Metal Powder Filled Aluminum Alloy Composites for Gear Application
  3. Parametric study and optimization of multiwalled carbon nanotube filled friction composite materials using taguchi method
  4. The in vitro wear behavior of nanozirconia-filled dental composite in food slurry condition
  5. Study on mechanical and wear characterization of novel Co30Cr4Mo biomedical alloy with added nickel under dry and wet sliding conditions using Taguchi approach
  6. Optimum selection of nano- and microsized filler for the best combination of physical, mechanical, and wear properties of dental composites
  7. Tribological and thermomechanical analysis of CaO (quicklime) particulates filled ZA-27 alloy composites for bearing application
  8. Experimental investigation and numerical simulation of granite powder filled polymer composites for wind turbine blade: A comparative analysis
  9. Investigation on mechanical and thermo-mechanical properties of granite powder filled treated jute fiber reinforced epoxy composite
  10. Novel dental composite material reinforced with silane functionalized microsized gypsum filler particles
  11. Analysis of polymerization shrinkage and thermo-mechanical characterizations of resin-based dental composite reinforced with silane modified nanosilica filler particle
  12. Physical and thermo-mechanical characterizations of resin-based dental composite reinforced with silane-modified nanoalumina filler particle
  13. Optimization of tribo-performance of brake friction materials: Effect of nano filler
  14. Effect of stacking sequence on physical, mechanical and tribological properties of glass-carbon hybrid composites
  15. Thermo-Mechanical Properties and Abrasive Wear Behavior of Silicon Carbide Filled Woven Glass Fiber Composites
  16. Comparative investigations on three-body abrasive wear behavior of long and short glass fiber-reinforced epoxy composites
  17. A review paper on rapid prototyping and rapid tooling techniques for fabrication of prosthetic socket
  18. FRICTION BRAKING PERFORMANCE OF NANOFILLED HYBRID FIBER REINFORCED PHENOLIC COMPOSITES: INFLUENCE OF NANOCLAY AND CARBON NANOTUBES
  19. Mechanical and wear behavior of vinyl ester-carbon/cement by-pass dust particulate filled homogeneous and their functionally graded composites
  20. Thermo-mechanical characterization of nano filled and fiber reinforced brake friction materials
  21. Mechanical and fracture toughness behavior of TiO2-filled A384 metal alloy composites
  22. Thermo-mechanical properties of silicon carbide filled chopped glass fiber reinforced epoxy composites
  23. Investigations on micro-mechanical and thermal characteristics of glass fiber reinforced epoxy based binary composite structure using finite element method
  24. COMPUTATIONAL OPTIMIZATION OF TiO 2 FILLED A384 ALLOY COMPOSITES IN EROSIVE ENVIRONMENT
  25. Solid Particle Erosion of Short Glass Fiber Reinforced Polyester Composite
  26. Effect of Nanoclay Reinforcement on the Friction Braking Performance of Hybrid Phenolic Friction Composites
  27. Thermo-mechanical correlations to erosion performance of short glass/carbon fiber reinforced vinyl ester resin hybrid composites
  28. Comparison of the Mechanical and Thermo-Mechanical Properties of Unfilled and SiC Filled Short Glass Polyester Composites
  29. A simulation study on thermal conductivity of glass bead embedded polymeric system
  30. Thermo-mechanical and crack position on stress intensity factor in particle-reinforced Zinc–aluminium alloy composites
  31. Damage assessment of titania filled zinc–aluminum alloy metal matrix composites in erosive environment: A comparative study
  32. Analytical interpretations of structural and mechanical response of high density polyethylene/hydroxyapatite bio-composites
  33. Laser assisted rapid manufacturing technique for the manufacturing of functionally graded materials
  34. Processing and Thermal Conductivity Characterization of Solid Glass Micro-Spheres Filled Polymer Composites
  35. Processing and Thermal Conductivity Characterization of Solid Glass Micro-Spheres Filled Polymer Composites
  36. Effect of Filler Content and Alkalization on Mechanical and Erosion Wear Behavior of CBPD Filled Bamboo Fiber Composites
  37. Fabrication, Mechanical Characterization and FTIR Spectroscopic Analysis of Fish Scale Reinforced Epoxy Composites
  38. Fabrication, Mechanical Characterization and FTIR Spectroscopic Analysis of Fish Scale Reinforced Epoxy Composites
  39. PERFORMANCE ANALYSIS OF ORGANIC FRICTION COMPOSITE MATERIALS BASED ON CARBON NANOTUBES-ORGANIC-INORGANIC FIBROUS REINFORCEMENT USING HYBRID AHP-FTOPSIS APPROACH
  40. Evaluation of fade-recovery performance of hybrid friction composites based on ternary combination of ceramic-fibers, ceramic-whiskers, and aramid-fibers
  41. Silicon Carbide Filled Polymer Composite for Erosive Environment Application: A Comparative Analysis of Experimental and FE Simulation Results
  42. Targeted material design of flyash filled composites for friction braking application by non-linear regression optimization technique
  43. Influence of vermiculite on performance of flyash-based fibre-reinforced hybrid composites as friction materials
  44. Damage Assessment of Short Glass Fiber Reinforced Polyester Composites: A Comparative Study
  45. Structural and mechanical properties of needle-punched nonwoven reinforced composites in erosive environment
  46. Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites
  47. Structural correlations to sliding wear performance of PA-6/PP-g-MA/nanoclay ternary nanocomposites
  48. Thermo-mechanical correlations to erosion performance of short carbon fibre reinforced vinyl ester resin composites
  49. Effect of fiber loading and orientation on mechanical and erosion wear behaviors of glass–epoxy composites
  50. Hybrid composite friction materials reinforced with combination of potassium titanate whiskers and aramid fibre: Assessment of fade and recovery performance
  51. Mechanical and dry sliding wear characterization of epoxy–TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment
  52. Effect of fiber length on mechanical behavior of coir fiber reinforced epoxy composites
  53. A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled Homogenous Composites and Their Functionally Graded Materials
  54. Processing, characterisation and erosion wear analysis of SiC filled glass-epoxy-composites
  55. Effect of Different Parameters on Mechanical and Erosion Wear Behavior of Bamboo Fiber Reinforced Epoxy Composites
  56. Effect of Carbon Nanotubes on Tribo-Performance of Brake Friction Materials
  57. Ductile-to-brittle transition in cenosphere-filled polypropylene composites
  58. Performance sensitivity of hybrid phenolic composites in friction braking: Effect of ceramic and aramid fibre combination
  59. Solid Particle Erosion of Particulate Filled Short Glass Fiber Reinforced Polyester Resin Composites
  60. Effect of Ceramic Fillers on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites: A Comparative Study
  61. Tribo-Performance Analysis of Fly Ash–Aluminum Coatings Using Experimental Design and ANN
  62. Development, characterization and erosion wear response of plasma sprayed fly ash–aluminum coatings
  63. Performance assessment of hybrid composite friction materials based on flyash–rock fibre combination
  64. A study on a possible correlation between thermal conductivity and wear resistance of particulate filled polymer composites
  65. Flyash Filling for Improved Wear Resistance of Glass-Polyester Composites-An Experimental Study
  66. Modified erosion wear characteristics of glass-polyester composites by Silicon Carbide filling: a parametric study using Taguchi technique
  67. Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review
  68. Performance prediction of solar air heater having roughened duct provided with transverse and inclined ribs as artificial roughness
  69. Study on mechanical and erosion wear behavior of hybrid composites using Taguchi experimental design
  70. A study on processing, characterization and erosion behavior of fish (Labeo-rohita) scale filled epoxy matrix composites
  71. Study on Erosion Response of Hybrid Composites Using Taguchi Experimental Design
  72. Tribo-performance of polyester hybrid composites: Damage assessment and parameter optimization using Taguchi design
  73. Taguchi method applied to parametric appraisal of erosion behavior of GF-reinforced polyester composites
  74. A modeling approach for prediction of erosion behavior of glass fiber–polyester composites
  75. An evolutionary approach to parameter optimisation of submerged arc welding in the hardfacing process
  76. Parametric optimization of wire electrical discharge machining (WEDM) process using taguchi method
  77. Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method