All Stories

  1. Simulation and growing study of Cu–Al–S thin films deposited by atomic layer deposition
  2. Chemical deposition of selenium layers for selenization of sputtered and electrodeposited Cu–Zn–Sn metallic layers for photovoltaic application
  3. Impact of oxygen concentration during the deposition of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD Zn(S,O) based solar cell
  4. Adaptation of the surface-near Ga content in co-evaporated Cu(In,Ga)Se 2 for CdS versus Zn(S,O)-based buffer layers
  5. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1−x)4 based solar cells
  6. Depolarization effect in rare-earth doped Y2 O3 films in blue and UV spectral range
  7. Dielectric function of zinc oxide thin films in a broad spectral range
  8. Revisiting the interpretation of biased luminescence: Effects on Cu(In,Ga)Se2 photovoltaic heterostructures
  9. Crystallization behavior of Cu2ZnSn(Sx, Se1−x)4 absorbers processed from sputtered Cu2ZnSnS4 precursors under different selenization conditions
  10. GaSe Formation at the Cu(In,Ga)Se2/Mo Interface–A Novel Approach for Flexible Solar Cells by Easy Mechanical Lift‐Off
  11. Search for new bath formulations Of Zn(S, O, OH) buffer layer to outperform record performances Of CdS-based CIGSe solar cells
  12. Composition and structural study of solution-processed Zn(S,O,OH) thin films grown using H2O2 based deposition route
  13. Broadband light-trapping in ultra-thin nano-structured solar cells
  14. Lambertian back reflector in Cu(InGa)Se 2 solar cell: optical modeling and characterization
  15. Solution-processed copper zinc tin sulfide thin films from metal xanthate precursors
  16. Impact of the deposition conditions of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD ZnS-based solar cell
  17. Effects of additives on the improved growth rate and morphology of Chemical Bath Deposited Zn(S,O,OH) buffer layer for Cu(In,Ga)Se2- based solar cells
  18. Optical approaches to improve the photocurrent generation in Cu(In,Ga)Se2 solar cells with absorber thicknesses down to 0.5 μm
  19. Insights on the influence of surface roughness on photovoltaic properties of state of the art copper indium gallium diselenide thin films solar cells
  20. Toward high efficiency ultra-thin CIGSe based solar cells using light management techniques
  21. Plasmonic enhancement of up-conversion in ultrathin layers
  22. Towards ultrathin copper indium gallium diselenide solar cells: proof of concept study by chemical etching and gold back contact engineering
  23. Mo/Cu(In, Ga)Se2 back interface chemical and optical properties for ultrathin CIGSe solar cells
  24. Electrodeposition Mechanism of Indium Sulfide and Indium Oxi(hydroxi)sulfide Thin Films from In(III)-thiosulfate Acidic Aqueous Solutions
  25. Investigation of the metastability behavior of CIGS based solar cells with ZnMgO–Zn(S,O,OH) window-buffer layers
  26. Thinning of CIGS solar cells: Part I: Chemical processing in acidic bromine solutions
  27. Thinning of CIGS solar cells: Part II: Cell characterizations
  28. Chemical deposition methods for Cd-free buffer layers in CI(G)S solar cells: Role of window layers
  29. Ultrathin Cu(In, Ga)Se2 solar cells
  30. (Invited) Recent Advances in Electrodeposition of Interfacial Buffer Layers in Chalcopyrite-Based Solar Cells
  31. Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)–ZnMgO interface buffer layers
  32. Electrodeposition of ZnO nanorod arrays on ZnO substrate with tunable orientation and optical properties
  33. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments
  34. The Zn(S,O,OH)/ZnMgO buffer in thin-film Cu(In,Ga)(Se,S)2-based solar cells part II: Magnetron sputtering of the ZnMgO buffer layer for in-line co-evaporated Cu(In,Ga)Se2solar cells
  35. The Zn(S,O,OH)/ZnMgO buffer in thin film Cu(In,Ga)(S,Se)2 -based solar cells part I: Fast chemical bath deposition of Zn(S,O,OH) buffer layers for industrial application on Co-evaporated Cu(In,Ga)Se2 and electrodeposited CuIn(S,Se)2 solar cells
  36. Sub-Gap Modulated Photo Current Spectroscopy performed on Cu(Inx,Ga1−x)(Sey,S1−y)2 based solar cells
  37. Solution Processing Route to High Efficiency CuIn(S,Se)2 Solar Cells
  38. Compositional engineering of chemical bath deposited (Zn,Cd)S buffer layers for electrodeposited CuIn(S,Se)2and coevaporated Cu(In,Ga)Se2solar cells
  39. A better understanding of the growth mechanism of Zn(S,O,OH) chemical bath deposited buffer layers for high efficiency Cu(In,Ga)(S,Se)2solar cells
  40. Interfacial chemistry control in thin film solar cells based on electrodeposited CuIn(S,Se)2
  41. Thermodynamic and experimental study of chemical bath deposition of Zn(S,O,OH) buffer layers in basic aqueous ammonia solutions. Cell results with electrodeposited CuIn(S,Se)2 absorbers
  42. Admittance spectroscopy of cadmium free CIGS solar cells heterointerfaces
  43. Zinc Sulfide Based Chemically Deposited Buffer Layers for Electrodeposited CIS Solar Cells
  44. Cu(In,Ga)(S,Se)2 solar cells and modules by electrodeposition
  45. Where does photocurrent flow in polycrystalline CdS?
  46. Formation and characterization of the CuIn(S,Se)2/buffer layer interface in electrodeposited solar cells
  47. Chalcopyrite thin film solar cells by electrodeposition
  48. Large-area Cd-free CIGS solar modules with In2S3 buffer layer deposited by ALCVD
  49. Growth studies and characterisation of In2S3 thin films deposited by atomic layer deposition (ALD)
  50. CD-free Cu(In,Ga)Se2 thin-film solar modules with In2S3 buffer layer by ALCVD
  51. Towards Better Understanding of High Efficiency Cd-free CIGS Solar Cells Using Atomic Layer Deposited Indium Sulfide Buffer Layers
  52. High-efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD)
  53. On the electrochromic properties of antimony–tin oxide thin films deposited by pulsed laser deposition
  54. Influence of tin doping on the structural and physical properties of indium–zinc oxides thin films deposited by pulsed laser deposition
  55. Scattering mechanisms and electronic behavior in transparent conducting ZnxIn2Ox+3 indium–zinc oxide thin films
  56. Structural changes induced by Sn, Zr, Al substitution in ZnkIn2Ok+3 transparent conducting oxides powders as deduced by transmission electron microscopy
  57. Structures and Textures of Transparent Conducting Pulsed Laser Deposited In2O3–ZnO Thin Films Revealed by Transmission Electron Microscopy
  58. Systematic study and performance optimization of transparent conducting indium–zinc oxides thin films
  59. Thin Films of Antimony-Tin Oxide as Counter-Electrodes for Proton Working Electrochromic Devices
  60. Characterization of indium zinc oxide thin films prepared by pulsed laser deposition using a Zn3In2O6 target
  61. Structural and physical characterisation of transparent conducting pulsed laser deposited In2O3–ZnO thin films
  62. Characterization of Transparent Conducting Pulsed Laser Deposited Films in the Indium Zinc Oxide System