All Stories

  1. X‐Ray Microscopy: A Non‐Destructive Multi‐Scale Imaging to Study the Inner Workings of Batteries
  2. Wild-Type and SOD1-G93A SH-SY5Y under Oxidative Stress: EVs Characterization and Topographical Distribution of Budding Vesicles
  3. 3D imaging of micro-segregation and corrosion behavior of alloying elements in archaeological artefacts from Motya (Sicily, Italy)
  4. Journal of Experimental and Theoretical Analyses—JETA: A New Open Access Journal for Highlighting the Results of Multidisciplinary Analyses in Science, Technology, and Engineering
  5. Conventional and advanced techniques for archaeological diagnostic of iron artefacts
  6. A Review of Applications of Nanocellulose to Preserve and Protect Cultural Heritage Wood, Paintings, and Historical Papers
  7. 3D X-ray Microscopy (XRM) investigation of exogenous materials inside mussels’ organs
  8. A comprehensive strategy for exploring corrosion in iron-based artefacts through advanced Multiscale X-ray Microscopy
  9. Review—Multiscale Characterization of Li-Ion Batteries through the Combined Use of Atomic Force Microscopy and X-ray Microscopy and Considerations for a Correlative Analysis of the Reviewed Data
  10. Carbon Nanotubes for Gas Sensing
  11. Current Nanocarrier Strategies Improve Vitamin B12 Pharmacokinetics, Ameliorate Patients’ Lives, and Reduce Costs
  12. Micro and Nanoplastics Identification: Classic Methods and Innovative Detection Techniques
  13. Magnetic force microscopy characterization of core–shell cobalt-oxide/hydroxide nanoparticles
  14. Determination of Total Silicon and SiO2 Particles Using an ICP-MS Based Analytical Platform for Toxicokinetic Studies of Synthetic Amorphous Silica
  15. Different instrumental approaches to understand the chitosan coated niosomes/mucin interaction
  16. Mechanical Characterization of Methanol Plasma Treated Fluorocarbon Ultrathin Films Through Atomic Force Microscopy
  17. Magnetic force microscopy characterization of cobalt nanoparticles: A preliminary study
  18. Graphene Oxide: A Smart (Starting) Material for Natural Methylxanthines Adsorption and Detection
  19. 15th Eurasia Conference on Chemical Sciences (EuAsC2S-15) – 5th–8th September 2018, Rome, Italy
  20. Hydrophilic Silver Nanoparticles Loaded into Niosomes: Physical–Chemical Characterization in View of Biological Applications
  21. How alkali-activated Ti surfaces affect the growth of tethered PMMA chains: a close-up study on the PMMA thickness and surface morphology
  22. Spinning Disk Reactor Technique for the Synthesis of Nanometric Sulfur TiO2Core–Shell Powder for Lithium Batteries
  23. Thermal and mechanical optimization of nano-foams for sprayed insulation
  24. Long-Lasting, Antinociceptive Effects of pH-Sensitive Niosomes Loaded with Ibuprofen in Acute and Chronic Models of Pain
  25. Preface: NANOINNOVATION 2018
  26. Oxidative Plasma Treatment of Fluorocarbon Surfaces for Blood-Contacting Applications
  27. Development of new experimental test for sheet metals through-thickness behaviour characterization
  28. Intracellular Transport of Silver and Gold Nanoparticles and Biological Responses: An Update
  29. Identification of nanoparticles and nanosystems in biological matrices with scanning probe microscopy
  30. Chitosan Glutamate-Coated Niosomes: A Proposal for Nose-to-Brain Delivery
  31. Novel Alkali Activation of Titanium Substrates To Grow Thick and Covalently Bound PMMA Layers
  32. Deployment and exploitation of nanotechnology nanomaterials and nanomedicine
  33. Nanomechanical characterization of K-basalt from Roman comagmatic province: A preliminary study
  34. Preface: NANOINNOVATION 2017
  35. Natural and synthetic nanodiamonds: from stars to laboratories
  36. Multiscale mechanical characterization of hybrid Ti/PMMA layered materials
  37. Self-assembling of calcium salt of the new DNA base 5-carboxylcytosine
  38. Glucose capped silver nanoparticles induce cell cycle arrest in HeLa cells
  39. Microstructural evidence for seismic and aseismic slips along clay-bearing, carbonate faults
  40. Capability of tip-enhanced Raman spectroscopy about nanoscale analysis of strained silicon for semiconductor devices production
  41. Beyond the concepts of nanocomposite and 3D printing: PVA and nanodiamonds for layer-by-layer additive manufacturing
  42. Nanotechnology for Food Packaging and Food Quality Assessment
  43. Detection of stiff nanoparticles within cellular structures by contact resonance atomic force microscopy subsurface nanomechanical imaging
  44. Electrochemical atomic force microscopy: In situ monitoring of electrochemical processes
  45. In Situ control and modification of the probe magnetization state for accurate magnetic force microscopy
  46. Plasma enhanced hot filament CVD growth of thick carbon nanowall layers
  47. Preface: Nanoinnovation 2016
  48. Single nanoparticles magnetization curves by controlled tip magnetization magnetic force microscopy
  49. Study of the local and global deformation process of an aluminium alloy using full-field measurements
  50. Cover Picture: Phys. Status Solidi C 10–12/2016
  51. Nanocrystalline sp 2 and sp 3 carbons: CVD synthesis and applications
  52. Nanodiamonds and gold nanoparticles: a promising couple for CRM-free photonics
  53. Niosomal approach to brain delivery: Development, characterization and in vitro toxicological studies
  54. Structural and morphological peculiarities of hybrid Au/nanodiamond engineered nanostructures
  55. Magnetic Force Microscopy
  56. Removal of electrostatic artifacts in magnetic force microscopy by controlled magnetization of the tip: application to superparamagnetic nanoparticles
  57. Contact resonance atomic force microscopy (CR-AFM) in applied mineralogy: the case of natural and thermally treated diaspore
  58. Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview
  59. Contact resonance atomic force microscopy for viscoelastic characterization of polymer-based nanocomposites at variable temperature
  60. Elastic modulus measurements at variable temperature: Validation of atomic force microscopy techniques
  61. Measurement of the nonmagnetic coating thickness of core-shell magnetic nanoparticles by controlled magnetization magnetic force microscopy
  62. Nanoshaping field emitters from glassy carbon sheets: a new functionality induced by H-plasma etching
  63. Preface: NanoItaly 2015
  64. Fabrication of hybrid Ti/PMMA materials for skull prosthesis reconstruction
  65. Methanol plasma treatment of fluorocarbon ultra-thin films for stents applications
  66. Microbial Cells Force Spectroscopy by Atomic Force Microscopy: A Review
  67. Microscopies at the Nanoscale for Nano-Scale Drug Delivery Systems
  68. Strategies for fabrication of innovative and highly biocompatible diamond electrodes
  69. Electronic Thermal Management by nanodiamonds
  70. Glucose capped silver nanoparticles enter HeLa cells and induce S and G2/M arrest
  71. Nanodiamonds and Conducting Polymers: a new paradigm for multifunctional nanomaterials
  72. Atomic Force Microscopy Techniques for Nanomechanical Characterization: A Polymeric Case Study
  73. 8.7% Power conversion efficiency polymer solar cell realized with non-chlorinated solvents
  74. Rhodamine/Nanodiamond as a System Model for Drug Carrier
  75. Biomedical Applications of Nanodiamonds: An Overview
  76. A Special Section on Nanodiamonds for Biomedical Applications
  77. Nanodiamonds for field emission: state of the art
  78. Polyaniline–nanodiamond fibers resulting from the self-assembly of nano-fibrils: a nanomechanical study
  79. A new apparatus for electron tomography in the scanning electron microscope
  80. Visualization and quantification of magnetic nanoparticles into vesicular systems by combined atomic and magnetic force microscopy
  81. Nanodiamonds: The ways forward
  82. Experimental issues in magnetic force microscopy of nanoparticles
  83. Preface: Nanoforum 2014
  84. Scientific basis of nanotechnology, implications for the food sector and future trends
  85. Nanocarbon surfaces for biomedicine
  86. Magnetic force microscopy
  87. Characterization of carbon structures produced by graphene self-assembly
  88. Network assembly of gold nanoparticles linked through fluorenyl dithiol bridges
  89. Detonation nanodiamonds tailor the structural order of PEDOT chains in conductive coating layers of hybrid nanoparticles
  90. Si/C hybrid nanostructures for Li-ion anodes: An overview
  91. Nanotechnology and textiles engineered by carbon nanotubes for the realization of advanced personal protective equipments
  92. Thickness measurement of soft thin films on periodically patterned magnetic substrates by phase difference magnetic force microscopy
  93. Solid-to-solid phase transformations of nanostructured selenium-tin thin films induced by thermal annealing in oxygen atmosphere
  94. Preface: Nanoforum 2013
  95. New morphological, chemical, and structural data of woolly erionite-Na from Durkee, Oregon, U.S.A.
  96. Oral, short-term exposure to titanium dioxide nanoparticles in Sprague-Dawley rat: focus on reproductive and endocrine systems and spleen
  97. Characterization of polyaniline–detonation nanodiamond nanocomposite fibers by atomic force microscopy based techniques
  98. On the tip calibration for accurate modulus measurement by contact resonance atomic force microscopy
  99. One-Step Growth and Shaping by a Dual-Plasma Reactor of Diamond Nanocones Arrays for the Assembling of Stable Cold Cathodes
  100. Macroscopic self-standing SWCNT fibres as efficient electron emitters with very high emission current for robust cold cathodes
  101. Role of gemcitabine-based combination therapy in the management of advanced pancreatic cancer: A meta-analysis of randomised trials
  102. Silver and carbon nanoparticles toxicity in sea urchin Paracentrotus lividus embryos
  103. Carbon Nanomaterials for Gas Adsorption
  104. High ordered biomineralization induced by carbon nanoparticles in the sea urchin Paracentrotus lividus
  105. Mechanical characterization of polymeric thin films by atomic force microscopy based techniques
  106. Epitaxial-like Growth of Co 3 O 4 /ZnO Quasi-1D Nanocomposites
  107. A Viable and Scalable Route for the Homogrowth of Si Nanocones and Si/C Nanostructures
  108. Silver Nanoparticles Stabilized with Thiols: A Close Look at the Local Chemistry and Chemical Structure
  109. Nanodiamond-mediated crystallization in fibers of PANI nanocomposites produced by template-free polymerization: Conductive and thermal properties of the fibrillar networks
  110. Two-Dimensional Networks of Ag Nanoparticles Bridged by Organometallic Ligand
  111. Hybrid C-nanotubes/Si 3D nanostructures by one-step growth in a dual-plasma reactor
  112. Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy
  113. Conducting polymer/nanodiamond composites: New opportunities and scientific challenges for material science
  114. Nanodiamond-Triggered Organization in Fibers of PANI Nanocomposites Produced by Chemical and Electrochemical Routes: Structural Features and Functional characterizations
  115. Shaping of Diamonds in 1D Nanostructures and Strategies for Fabrication of All-Diamond Microcomponents
  116. Gold nanoparticles on nanodiamond for nanophotonic applications
  117. Engineering detonation nanodiamond – Polyaniline composites by electrochemical routes: Structural features and functional characterizations
  118. Nanoclustering in Silicon Induced by Oxygen Ions Implanted
  119. Electronic properties of individual and assembled homotype SWCNT bundles
  120. Study of PEDOT conductive polymer films by admittance measurements
  121. Detonation Nanodiamond as Building Blocks for Fabrication of Densely Packed Arrays of Diamond Nanowhiskers
  122. A Special Issue on Advanced Carbon Nanostructures
  123. Indentation modulus and hardness of polyaniline thin films by atomic force microscopy
  124. Quantitative Evaluation of Bacteria Adherent and in Biofilm on Single-Wall Carbon Nanotube-Coated Surfaces
  125. Beyond cusp anomalous dimension from integrability in SYM[sub 4]
  126. Self-assembling of detonation nanodiamond and control of the organization in PANI-based nanocomposites: a case study for a tailored shaping of specific 3D architectures
  127. Novel insight into the alignment and structural ordering of supported ZnO nanorods
  128. Replay to the article by Wendel HP et al.: Endothelial progenitor cell capture stents — Hype or hope?
  129. A Model of Field Emission from Carbon Nanotubes Decorated by Nanodiamonds
  130. Honeycomb arrays of carbon nanotubes in alumina templates for field emission based devices and electron sources
  131. Acoustics and atomic force microscopy for the mechanical characterization of thin films
  132. Nanotechnology radar thermal management
  133. Carbon nanotube/nanodiamond structures: An innovative concept for stable and ready-to-start electron emitters
  134. Indentation modulus and hardness of viscoelastic thin films by atomic force microscopy: A case study
  135. Field emission properties of carbon nanotube arrays grown in porous anodic alumina
  136. High dielectric nanocrystalline materials on carbon nanotubes for vacuum electronics
  137. Cold cathodes assembled by microsized carbon nanotubes (CNT) systems
  138. Self-Assembly of n-Diamond Nanocrystals Into Supercrystals
  139. An Innovative and Viable Route for the Realization of Ultra-Thin Supercapacitors Electrodes Assembled with Carbon Nanotubes
  140. Preparation and Functional Characterizations of Ta
  141. Atomic force acoustic microscopy characterization of nanostructured selenium–tin thin films
  142. Polycrystalline diamond on self-assembled detonation nanodiamond: a viable route for fabrication of all-diamond preformed microcomponents
  143. Nanodiamond-Coated Carbon Nanotubes: Early Stage of the CVD Growth Process
  144. ELECTRON SPIN RESONANCE STUDY OF POLY (ORTHO-ANISIDINE)/SINGLE-WALLED CARBON NANOTUBE COMPOSITE FILMS: SPIN DYNAMICS AND EFFECTS OF PHYSISORPTION PROCESSES
  145. Quantitative measurement of indentation hardness and modulus of compliant materials by atomic force microscopy
  146. Characterization of epoxy/single-walled carbon nanotubes composite samples via atomic force acoustic microscopy
  147. Nanotechnology RADAR thermal management
  148. Hybrid Carbon Nanotube/Nanodiamond Structures as Electron Emitters for Cold Cathodes
  149. Photoconductivity of Packed Homotype Bundles Formed by Aligned Single-Walled Carbon Nanotubes
  150. Preparation and Thermal Characterization of Carbon Nanotubes-Based Composites for Applications in Electronics Packaging
  151. Si doped and nanocomposite Si–diamond films: Cathodoluminescence and photoluminescence characterizations of Si centers
  152. Assembling x-ray sources by carbon nanotubes
  153. Carbon nanotube cold cathodes for miniature X-ray tubes
  154. A molecular-mechanics based finite element model for strength prediction of single wall carbon nanotubes
  155. Local indentation modulus characterization via two contact resonance frequencies atomic force acoustic microscopy
  156. Capacitive and analytical approaches for the analysis of field emission from carbon nanotubes in a sphere-to-plane diode
  157. Atomic force acoustic microscopy characterization of carbon-based materials
  158. Magnetic resonance study of Ni nanoparticles in single-walled carbon nanotube bundles
  159. The World of Carbon Nanotubes: An Overview of CVD Growth Methodologies
  160. Local indentation modulus characterization of diamondlike carbon films by atomic force acoustic microscopy two contact resonance frequencies imaging technique
  161. Ablated Mg films with a graphite cover as photocathodes
  162. Nanocrystalline non-planar carbons: Growth of carbon nanotubes and curled nanostructures
  163. Effect of tip geometry on local indentation modulus measurement via atomic force acoustic microscopy technique
  164. Local elastic measurement in nanostructured materials via atomic force acoustic microscopy technique
  165. New routes in carbon nanotube synthesis by means of a modified hot filament chemical vapor deposition technique
  166. Structural characterization of hybrid carbon nanomaterials
  167. Strategies towards the assembling of carbon nanotube systems for particle and electromagnetic beams handling
  168. Towards the realization of a multielectrode field emission device: controlled growth of single wall carbon nanotube arrays
  169. Photoemission from nano-structured a-C/diamond layers irradiated by intense Nd:YAG laser harmonics
  170. Controlled Evolution of Carbon Nanotubes Coated by Nanodiamond:  the Realization of a New Class of Hybrid Nanomaterials
  171. Modulation of electrical properties in single-walled carbon nanotube/conducting polymer composites
  172. Meso- and nano-scale investigation of carbon fibers coated by nano-crystalline diamond
  173. Density Functional Study of H-Induced Defects as Nucleation Sites in Hybrid Carbon Nanomaterials
  174. Chemical/structural characterization of carbon nanoparticles produced by laser pyrolysis and used for nanotube growth
  175. Organized networks of helically wound single-walled C-nanotubes
  176. Structural features of diamond layers photo-emitting at sub-band gap energies
  177. Photoemission from diamond films illuminated by intense Nd:YAG laser harmonics
  178. Organization of single-walled nanotubes into macro-sized rectangularly shaped ribbons
  179. Modulation of charge transport in diamond-based layers
  180. Nanocomposite Si/Diamond Layers: Room Temperature Visible-Light Emitting Systems
  181. Aligned arrays of carbon nanotubes: modulation of orientation and selected-area growth
  182. Carbon nanotubes and nanowires grown from spherical carbon nano-particles
  183. Self-assembled carbon nanotubes grown without catalyst from nanosized carbon particles adsorbed on silicon
  184. Temperature-dependent conduction of W-containing composite diamond films
  185. Pulsed laser ablation of glassy carbon targets for the coating of ion accelerator electrodes
  186. Tree-like carbon nanostructures generated by the action of atomic hydrogen on glassy carbon
  187. Electrochemical behaviour of electrodes assembled with Ti-containing diamond films
  188. Silicon quantum dots in diamond matrix: a new synthesis route
  189. Polycrystalline diamond and Nd-doped diamond photoemitters
  190. Diamond-based composite layers as protective coatings for ion beam extraction systems
  191. Structural investigations of single-wall carbon nanotubes grown from nanosized graphite
  192. Growth of single-walled carbon nanotubes by a novel technique using nanosized graphite as carbon source
  193. Synthesis and characterization of ZnS nanoparticles in water/AOT/n-heptane microemulsions
  194. Microstructure and properties of nanocomposite diamond films obtained by a new CVD-based technique
  195. Unusual electrical behavior of Nd-doped diamond films
  196. A New CVD Route for the Synthesis of Composite Diamond-Based Materials
  197. Photoluminescence from silicon nanoparticles in a diamond matrix
  198. METALLIC CONDUCTION OF DIAMOND LAYERS CONTAINING NANOSIZE Nd DISPERSIONS
  199. ROOM TEMPERATURE PHOTOLUMINESCENCE FROM SILICON NANOPARTICLES EMBEDDED IN A DIAMOND MATRIX
  200. Antihypertensive efficacy of angiotensin converting enzyme inhibition and aspirin counteraction
  201. Selective production of carbon structures by non-equilibrium techniques
  202. Masthead
  203. Features of diamond deposition on modified silica glass substrates
  204. Amorphization and crystallization in high-dose Zn+-implanted silicon
  205. Cross‐sectional high resolution electron microscopy of Zn+ implanted and low‐power pulsed‐laser annealed GaAs
  206. Structural investigation of the titanium/diamond film interface
  207. Influence of Different Carbon Structures on Diamond Synthesis by Chemical Vapour Deposition
  208. Low power pulsed laser annealing of Zn+-implanted InP: first endeavours
  209. Solid-phase epitaxy induced by low-power pulsed-laser annealing of III-V compound semiconductors
  210. Morphological and Structural Investigations of Diamond Films Deposited on Substrates Covered by Carbon Layers
  211. Lattice defects in ion implanted GaAs
  212. Analysis of the Intermediate Layers Generated at the Film-Substrate Interface During the CVD Process of Diamond Synthesis
  213. Laser‐induced structural modifications of glassy carbon surfaces
  214. Lattice Electron Microscopy and Image Processing of Ion-Implanted and Laser-Annealed GaAs Structures
  215. Diamond Film CVD Synthesis on Titanium: Experimental Evidence of the Intermediate Phases at the Film/Substrate Interface
  216. Random and channeled ion-damage distributions in Zn+implanted GaAs by electron microscopy
  217. Development of different carbon phases during diamond film growth by CVD on glassy carbon substrates
  218. Laser-Induced Reduction of Carrier Activation Energy in Zn-Implanted GaAs
  219. Growth methodologies and characterization of different polycrystalline diamond films on Ta substrates
  220. Experimental evidence of different crystalline forms in chemical vapor deposited diamond films
  221. XPS study of laser-annealed ion-implanted GaAs
  222. High Voltage Transmission Electron Microscopy of Low Power Pulsed Laser Annealing of Zn + Implanted GaAs
  223. Damage distribution in GaAs implanted at elevated temperature
  224. Temperature behavior of implanted and pulsed laser irradiated GaAs
  225. Direct laser indiffusion of Ti into LiNbO3single crystals
  226. Laser in-diffusion of Ti in LiNbO3 single crystals
  227. RHEED and RBS analysis of low-power laser annealed GaAs
  228. Ability of reflection high energy electron diffraction (RHEED) to observe structural modifications in ion-implanted and annealed GaAs
  229. Low‐power pulsed‐laser annealing of implanted GaAs
  230. Preparation and characterization of Li-doped ZnO films
  231. Optical propagation loss reduction in ZnO thin films under CO2 laser treatment
  232. Thermal non-linearities of semiconductor-doped glasses in the near-IR region
  233. Structural properties of ZnO films prepared by R.F. sputtering for optical applications
  234. Dependence of glow discharge Si:H:Cl film morphology on diluent gas and SiCl4 partial pressure
  235. Influence of Ar-milling on cross-section structure of gallium arsenide
  236. About Some Peculiarities in Defect Appearence in Elemental and III–V Compound Semiconducting Materials
  237. Magnesium Film Photocathodes for High Brilliance Electron Injectors
  238. Controlled growth of ordered SWCNTs for the realization of multielectrode field emitter devices