Dr Josu Aguirrebeitia
Current affiliation: university of the Basque Country
Subject: Engineering & Technology
Primary location: Spain
Effect of the preload in the general static load-carrying capacity of four-contact-point slewing bearings for wind turbine generators: theoretical ...
Published in:Wind Energy
Publication date:2013-08-05Static capacity in preloaded four contact point slewing bearings
Second order mobility analysis of mechanisms using closure equations
Published in:Meccanica
Publication date:2012-03-15
Optimum synthesis of planar linkages using a strain–energy error function under geometric constraints
Published in:Mechanism and Machine Theory
Publication date:2010-01-01
A Metamodeling Technique for Variable Geometry Trusses Design via Equivalent Parametric Macroelements
Published in:Journal of Mechanical Design
Publication date:2009-01-01
Methodology for the Optimization of Bolting Sequences for Wind Generator Flanges
Published in:Journal of Pressure Vessel Technology
Publication date:2014-09-04
A Tetraparametric Metamodel for the Analysis and Design of Bolting Sequences for Wind Generator Flanges
Published in:Journal of Pressure Vessel Technology
Publication date:2011-01-01
Calculation of General Static Load-Carrying Capacity for the Design of Four-Contact-Point Slewing Bearings
Published in:Journal of Mechanical Design
Publication date:2010-01-01
A new finite element approach for the analysis of slewing bearings in wind turbine generators using superelement techniques
Published in:Meccanica
Publication date:2015-01-29
A Tetraparametric Metamodel for the Simulation and Optimization of Bolting Sequences for Wind Generator Flanges
Published in:Volume 3: Design and Manufacturing, Parts A and B
Publication date:2010-01-01
Static Load Carrying Capacity in Four Contact Point Slewing Bearings: Theoretical and Preliminary Finite Element Calculations
Published in:Volume 3: Design and Manufacturing, Parts A and B
Publication date:2010-01-01
Experimental study of the removal force in tapered implant-abutment interfaces: A pilot study
Published in:Journal of Prosthetic Dentistry
Publication date:2014-04-01
A Method for the Inverse Dynamics Analysis of Variable Geometry Trusses
Published in:Not available
Publication date:2010-01-01
An Error Function for Optimum Dimensional Synthesis of Mechanisms Using Genetic Algorithms
Published in:IUTAM Symposium on Evolutionary Methods in Mechanics
Publication date:2004-01-01
Theoretical calculation of general static load-carrying capacity for the design and selection of three row roller slewing bearings
Published in:Mechanism and Machine Theory
Publication date:2012-02-01
A finite element approach to the inverse dynamics and vibrations of variable geometry trusses
Published in:Finite Elements in Analysis and Design
Publication date:2011-03-01
Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models
Published in:Finite Elements in Analysis and Design
Publication date:2010-09-01
General static load-carrying capacity of four-contact-point slewing bearings for wind turbine generator actuation systems
Published in:Wind Energy
Publication date:2012-07-11Static load-carrying capacity of bearings for WTG actuation systems
General static load-carrying capacity for the design and selection of four contact point slewing bearings: Finite element calculations and theoreti...
Published in:Finite Elements in Analysis and Design
Publication date:2012-08-01
Dental Implants with Conical Implant-Abutment Interface: Influence of the Conical Angle Difference on the Mechanical Behavior of the Implant
Published in:The International Journal of Oral & Maxillofacial Implants
Publication date:2013-03-01
Effect of misalignment on rod lip seal behaviour
Published in:Tribology and Design II
Publication date:2012-09-03
Tri-dimensional eccentricity model of a rod lip seal
Published in:Tribology International
Publication date:2014-10-01
Eigensensitivity Analysis in Variable Geometry Trusses
Published in:AIAA Journal
Publication date:2011-07-01
General static load capacity in four contact point slewing bearings
Published in:Tribology and Design
Publication date:2010-04-22
A reduced eigenproblem formulation for Variable Geometry Trusses
Published in:Finite Elements in Analysis and Design
Publication date:2012-03-01
Kinematical synthesis of an inversion of the double linked fourbar for morphing wing applications
Published in:Frontiers of Mechanical Engineering
Publication date:2013-01-31
Kinematical synthesis of 1-dof mechanisms using finite elements and genetic algorithms
Published in:Finite Elements in Analysis and Design
Publication date:2005-09-01
Eigensensitivity-Based Optimal Damper Location in Variable Geometry Trusses
Published in:AIAA Journal
Publication date:2009-03-01
Kinematical Capabilities of an Inversion of the Double Linked Fourbar for UAV Morphing Wing Actuation
Published in:New Trends in Mechanism and Machine Science
Publication date:2012-08-10
A Numerical Method for the Second-Order Mobility Analysis of Mechanisms
Published in:Proceedings of EUCOMES 08
Publication date:Not available
A method for the study of position in highly redundant multibody systems in environments with obstacles
Published in:IEEE Transactions on Robotics and Automation
Publication date:2002-04-01
Inverse position problem in highly redundant multibody systems in environments with obstacles
Published in:Mechanism and Machine Theory
Publication date:2003-11-01
Second order analysis of the mobility of kinematic loops via acceleration compatibility analysis
Published in:Mechanism and Machine Theory
Publication date:2009-10-01
A new finite element to represent prismatic joint constraints in mechanisms
Published in:Finite Elements in Analysis and Design
Publication date:2006-11-01
A new APF strategy for path planning in environments with obstacles
Published in:Mechanism and Machine Theory
Publication date:2005-06-01
FEM subsystem replacement techniques for strength problems in variable geometry trusses
Published in:Finite Elements in Analysis and Design
Publication date:2008-04-01
Proportional damping approximation for structures with added viscoelastic dampers
Published in:Finite Elements in Analysis and Design
Publication date:2006-03-01
Second-order methods for the optimum synthesis of multibody systems
Published in:Structural and Multidisciplinary Optimization
Publication date:2000-05-01
An alternative full-pivoting algorithm for the factorization of indefinite symmetric matrices
Published in:Journal of Computational and Applied Mathematics
Publication date:2015-01-01
Analysis and characterization of the behaviour of a variable geometry structure
Published in:Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Publication date:2007-11-01
Eigendesign in brake carriers
Published in:Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Publication date:2013-04-10
New selection curves for four contact point slewing bearings
Published in:Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Publication date:2015-04-20