All Stories

  1. Increasing the Dissolution Rate of Polystyrene Waste in Solvent-Based Recycling
  2. Synthesis of Novel Nanocomposite Materials with Enhanced Antimicrobial Activity based on Poly(Ethylene Glycol Methacrylate)s with Ag, TiO2 or ZnO Nanoparticles
  3. Bioactive Edible Gel Films Based on Wheat Flour and Glucose for Food Packaging Applications
  4. Removal of undissolved substances in the dissolution-based recycling of polystyrene waste by applying filtration and centrifugation
  5. Thermo-chemical recycling of plastics retrieved from waste electric and electronic equipment (WEEE) by pyrolysis: Identification of the polymer type, removal of bromine compounds from plastics based on an environmentally-friendly process and characteri...
  6. An Evaluation of Experimental Calcium Ion-Leachable Nanocomposite Glass Ionomer Cements
  7. Thermal Treatment of a Commercial Polycyanoacrylate Adhesive Addressed for Instant Glass Restoration, for Investigating Its Ageing Tolerance
  8. Effect of the catalyst type on pyrolysis products distribution of polymer blends simulating plastics contained in waste electric and electronic equipment
  9. Synthesis and Characterization of Dental Nanocomposite Resins Reinforced with Dual Organomodified Silica/Clay Nanofiller Systems
  10. Thermal degradation kinetics of recycled biodegradable and non-biodegradable polymer blends either neat or in the presence of nanoparticles using the random chain-scission model
  11. Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends
  12. Effect of the Filler Modification on the Thermal and Mechanical Properties of Composite Polypropylene/Wollastonite Drawn Fibers
  13. Microplastic Pollution and Monitoring in Seawater and Harbor Environments: A Meta-Analysis and Review
  14. Removal of Bromine from Polymer Blends with a Composition Simulating That Found in Waste Electric and Electronic Equipment through a Facile and Environmentally Friendly Method
  15. Kinetic evaluation of the crosslinking of a low-temperature cured biobased epoxy-diamine structure
  16. Thermal Degradation Kinetics of Recycled Biodegradable and Non-Biodegradable Polymer Blends Either Neat or in the Presence of Nanoparticles Using the Random Chain-Scission Model
  17. Influence of radiant heat on GICs induced by a diode laser (445 nm)
  18. Effect of radiant heat induced by a diode laser (445 nm) on setting process of glass-ionomer cements monitored by Fourier transform infrared spectroscopy
  19. Simulation of the thermal degradation kinetics of biobased/biodegradable and non-biodegradable polymers using the random chain-scission model. Capabilities and limitations
  20. Microwave-assisted extraction as an effective method for the debromination of brominated flame retarded polymeric blends with a composition that simulates the plastic part of waste electric and electronic equipment (WEEE)
  21. ICTAC Kinetics Committee recommendations for analysis of thermal polymerization kinetics
  22. Toward More Universal Prediction of Polymer Solution Viscosity for Solvent-Based Recycling
  23. A Step Forward in Thermoplastic Polyesters: Understanding the Crystallization and Melting of Biobased Poly(ethylene 2,5-furandicarboxylate) (PEF)
  24. Catalytic pyrolysis of polymers with brominated flame-retardants originating in waste electric and electronic equipment (WEEE) using various catalysts
  25. Waste Material Recycling in the Circular Economy - Challenges and Developments
  26. Current Topics in Plastic Recycling
  27. Polymerisation Kinetics on FT-IR and Colorimetric Changes under UV Irradiation for a Commercial Polycyanoacrylate Adhesive, Addressed to Glass Restoration
  28. Role of Functional Groups in the Monomer Molecule on the Radical Polymerization in the Presence of Graphene Oxide. Polymerization of Hydroxyethyl Acrylate under Isothermal and Non-Isothermal Conditions
  29. Effect of Silica Nanoparticles Silanized by Functional/Functional or Functional/Non-Functional Silanes on the Physicochemical and Mechanical Properties of Dental Nanocomposite Resins
  30. Development of Bio-Composites with Enhanced Antioxidant Activity Based on Poly(lactic acid) with Thymol, Carvacrol, Limonene, or Cinnamaldehyde for Active Food Packaging
  31. Fluorosilane Water-Repellent Coating for the Protection of Marble, Wood and Other Materials
  32. Chemical Recycling of PET in the Presence of the Bio-Based Polymers, PLA, PHB and PEF: A Review
  33. State‐Of‐The‐Art Quantification of Polymer Solution Viscosity for Plastic Waste Recycling
  34. Correction to: Effect of brominated flame retardant on the pyrolysis products of polymers originating in WEEE
  35. Effect of brominated flame retardant on the pyrolysis products of polymers originating in WEEE
  36. Synthesis of Novel Dental Nanocomposite Resins by Incorporating Polymerizable, Quaternary Ammonium Silane-Modified Silica Nanoparticles
  37. Effect of brominated flame retardant on the pyrolysis products of polymers originating in WEEE
  38. A New Era in Engineering Plastics: Compatibility and Perspectives of Sustainable Alipharomatic Poly(ethylene terephthalate)/Poly(ethylene 2,5-furandicarboxylate) Blends
  39. Effect of Na- and Organo-Modified Montmorillonite/Essential Oil Nanohybrids on the Kinetics of the In Situ Radical Polymerization of Styrene
  40. TEOS-Based Superhydrophobic Coating for the Protection of Stone-Built Cultural Heritage
  41. Synthesis of D-Limonene Loaded Polymeric Nanoparticles with Enhanced Antimicrobial Properties for Potential Application in Food Packaging
  42. Towards High Molecular Weight Furan-Based Polyesters: Solid State Polymerization Study of Bio-Based Poly(Propylene Furanoate) and Poly(Butylene Furanoate)
  43. Polymer packaging waste recycling: study of the pyrolysis of two blends via TGA
  44. Nitroxide-mediated polymerization of styrene and limonene in the framework of synthesis of potentially functional polymers using naturally occurring terpenes
  45. Pyrolytic degradation kinetics of HIPS, ABS, PC and their blends with PP and PVC
  46. Novel trends in the thermo-chemical recycling of plastics from WEEE containing brominated flame retardants
  47. Depolymerization of PLA by Phase Transfer Catalysed Alkaline Hydrolysis in a Microwave Reactor
  48. Thermosoftening Plastics
  49. Sustainable Plastics from Biomass: Blends of Polyesters Based on 2,5-Furandicarboxylic Acid
  50. Effect of the side ethylene glycol and hydroxyl groups on the polymerization kinetics of oligo(ethylene glycol methacrylates). An experimental and modeling investigation
  51. Pyrolytic degradation of common polymers present in packaging materials
  52. Synthesis and Characterization of Novel Organomodified Nanoclays for Application in Dental Materials
  53. Effect of Graphene oxide or Functionalized Graphene Oxide on the Copolymerization Kinetics of Styrene/n-butyl Methacrylate
  54. Biobased Engineering Thermoplastics: Poly(butylene 2,5-furandicarboxylate) Blends
  55. Kinetic analysis of thermal and catalytic degradation of polymers found in waste electric and electronic equipment
  56. Synthesis and Characterization of Dental Nanocomposite Resins Filled with Different Clay Nanoparticles
  57. Exploring Next-Generation Engineering Bioplastics: Poly(alkylene furanoate)/Poly(alkylene terephthalate) (PAF/PAT) Blends
  58. Solid-State Polymerization of Poly(Ethylene Furanoate) Biobased Polyester, III: Extended Study on Effect of Catalyst Type on Molecular Weight Increase
  59. Effect of Natural Macromolecule Filler on the Properties of High‐Density Polyethylene (HDPE)
  60. Investigation of radical polymerization kinetics of poly(ethylene glycol) methacrylate hydrogels via DSC and mechanistic or isoconversional models
  61. Pyrolysis mechanism and thermal degradation kinetics of poly(bisphenol A carbonate)-based polymers originating in waste electric and electronic equipment
  62. Thermal Degradation Kinetics and Viscoelastic Behavior of Poly(Methyl Methacrylate)/Organomodified Montmorillonite Nanocomposites Prepared via In Situ Bulk Radical Polymerization
  63. Solid-State Polymerization of Poly(Ethylene Furanoate) Biobased Polyester, II: An Efficient and Facile Method to Synthesize High Molecular Weight Polyester Appropriate for Food Packaging Applications
  64. Use of asphaltene filler to improve low-density polyethylene properties
  65. Polymerization Kinetics of n-Butyl Methacrylate in the Presence of Graphene Oxide Prepared by Two Different Oxidation Methods with or without Functionalization
  66. Effect of graphene oxide on the kinetics of the radical polymerization of styrene
  67. Solid-State Polymerization of Poly(ethylene furanoate) Biobased Polyester, I: Effect of Catalyst Type on Molecular Weight Increase
  68. Thermal degradation characteristics and products obtained after pyrolysis of specific polymers found in Waste Electrical and Electronic Equipment
  69. Effect of Graphene Oxide on the Reaction Kinetics of Methyl Methacrylate In Situ Radical Polymerization via the Bulk or Solution Technique
  70. A novel method for the preparation of inorganic and organo-modified montmorillonite essential oil hybrids
  71. Synthesis and Characterization of Bio-Based Polyesters: Poly(2-methyl-1,3-propylene-2,5-furanoate), Poly(isosorbide-2,5-furanoate), Poly(1,4-cyclohexanedimethylene-2,5-furanoate)
  72. “In cell” biotinylation and immobilization of hBMP-2 ( h uman B one M orphogenetic P rotein 2) on polymeric surfaces
  73. Solid State Polymerization of Poly(Ethylene Furanoate) and Its Nanocomposites with SiO2and TiO2
  74. Polymerization Kinetics of Poly(2-Hydroxyethyl Methacrylate) Hydrogels and Nanocomposite Materials
  75. Poly(ethylene furanoate- co -ethylene terephthalate) biobased copolymers: Synthesis, thermal properties and cocrystallization behavior
  76. An experimental and theoretical study of butyl methacrylatein situradical polymerization kinetics in the presence of graphene oxide nanoadditive
  77. Green Synthesis of Silver Nanoparticles and Study of Their Antimicrobial Properties
  78. Synthesis and characterization of poly(2-hydroxyethyl methacrylate)/silver hydrogel nanocomposites prepared via in situ radical polymerization
  79. Effect of high surface area mesoporous silica fillers (MCF and SBA-15) on solid state polymerization of PET
  80. Bulk Free Radical Polymerization of Methyl Methacrylate and Vinyl Acetate: A Comparative Study
  81. Toward the development of a mathematical model for the bulk in situ radical polymerization of methyl methacrylate in the presence of nano-additives
  82. Thermal degradation of biobased polyesters: Kinetics and decomposition mechanism of polyesters from 2,5-furandicarboxylic acid and long-chain aliphatic diols
  83. Acetaldehyde contamination of water, alcoholic, and non-alcoholic beverages stored in glass or plastic bottles
  84. Synthesis, characterization and reaction kinetics of PMMA/silver nanocomposites prepared via in situ radical polymerization
  85. Effect of graphene oxide and its modification on the microstructure, thermal properties and enzymatic hydrolysis of poly(ethylene succinate) nanocomposites
  86. Recycling Materials Based on Environmentally Friendly Techniques
  87. Chemical and Thermochemical Recycling of Polymers from Waste Electrical and Electronic Equipment
  88. Synthesis, Properties, and Mathematical Modeling of Biodegradable Aliphatic Polyesters Based on 1,3-Propanediol and Dicarboxylic Acids
  89. Effect of organoclays type on solid-state polymerization (SSP) of poly(ethylene terephthalate): Experimental and modeling
  90. Dental light-cured nanocomposites based on a dimethacrylate matrix: Thermal degradation and isoconversional kinetic analysis in N2 atmosphere
  91. Sustainable, eco-friendly polyesters synthesized from renewable resources: preparation and thermal characteristics of poly(dimethyl-propylene furanoate)
  92. Catalytic and thermal pyrolysis of polycarbonate in a fixed-bed reactor: The effect of catalysts on products yields and composition
  93. Pyrolysis and catalytic pyrolysis as a recycling method of waste CDs originating from polycarbonate and HIPS
  94. Biopolyester-based nanocomposites: Structural, thermo-mechanical and biocompatibility characteristics of poly(3-hydroxybutyrate)/montmorillonite clay nanohybrids
  95. Nanocomposites of poly(3-hydroxybutyrate)/organomodified montmorillonite: Effect of the nanofiller on the polymer's biodegradation
  96. Evaluating the Role of Nanomontmorillonite in Bulk in Situ Radical Polymerization Kinetics of Butyl Methacrylate through a Simulation Model
  97. Application of density functional theory in combination with FTIR and DSC to characterise polymer drug interactions for the preparation of sustained release formulations between fluvastatin and carrageenans
  98. Investigation of the radical polymerization kinetics using DSC and mechanistic or isoconversional methods
  99. Effect of clay structure and type of organomodifier on the thermal properties of poly(ethylene terephthalate) based nanocomposites
  100. A Simple Route for Purifying Extracellular Poly(3-hydroxybutyrate)-depolymerase fromPenicillium pinophilum
  101. Polymer Degradation Under Microwave Irradiation
  102. Role of Polylimonene as a Bio-Based Additive in Thermal Oxidation of High Impact Polystyrene
  103. Polymerization Kinetics and Thermal Degradation of Poly(2-hydroxyethyl methacylate) / Organo-Modified Montmorillonite Nanocomposites Prepared by In Situ Bulk Polymerization
  104. Effect of organomodified clay on the reaction kinetics, properties and thermal degradation of nanocomposites based on poly(styrene-co -ethyl methacrylate)
  105. Biodegradable poly(ethylene succinate) nanocomposites. Effect of filler type on thermal behaviour and crystallization kinetics
  106. Effect of the type of nano-filler on the crystallization and mechanical properties of syndiotactic polystyrene based nanocomposites
  107. Tensile bond characteristics between composite resin and resin-modified glass-ionomer restoratives used in the open-sandwich technique
  108. Synthesis and characterization of novel nanocomposite materials based on poly(styrene-co-butyl methacrylate) copolymers and organomodified clay
  109. Spherulite growth rates of in situ prepared poly(propylene terephthalate)/SiO2 nanocomposites
  110. Recycling of poly(ethylene terephthalate) waste through methanolic pyrolysis in a microwave reactor
  111. Environmentally friendly chemical recycling of poly(bisphenol-A carbonate) through phase transfer-catalysed alkaline hydrolysis under microwave irradiation
  112. Recent Advances in Polycarbonate Recycling: A Review of Degradation Methods and Their Mechanisms
  113. Cure Kinetics Study of Two Epoxy Systems with Fourier Tranform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC)
  114. Chitosan-g-PEG nanoparticles ionically crosslinked with poly(glutamic acid) and tripolyphosphate as protein delivery systems
  115. Chemical Recycling of Polycarbonate Based Wastes Using Alkaline Hydrolysis Under Microwave Irradiation
  116. Polymerization kinetics and thermal properties of poly(alkyl methacrylate)/organomodified montmorillonite nanocomposites
  117. Material Recycling - Trends and Perspectives
  118. Effect of the type of organic modifier on the polymerization kinetics and the properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites
  119. Migration of styrene from plastic packaging based on polystyrene into food simulants
  120. Crystallization and biodegradation of poly(butylene azelate): Comparison with poly(ethylene azelate) and poly(propylene azelate)
  121. Thermal degradation kinetics and isoconversional analysis of biodegradable poly(3-hydroxybutyrate)/organomodified montmorillonite nanocomposites
  122. Isoconversional Glass Transition Kinetics and Fragility Determination of Poly[(ethylene 2,6-naphthalate)-co -(butylene 2,6-naphthalate)] Random Copolymers
  123. Synthesis and Characterization of PMMA/Organomodified Montmorillonite Nanocomposites Prepared by in Situ Bulk Polymerization
  124. Development of a comprehensive mathematical model for free radical suspension polymerization of methyl methacrylate
  125. Aminolytic depolymerization of poly(ethylene terephthalate) waste in a microwave reactor
  126. PLA nanocomposites: Effect of filler type on non-isothermal crystallization
  127. Synthesis, Crystallization, and Enzymatic Degradation of the Biodegradable Polyester Poly(ethylene azelate)
  128. PMMA/organomodified montmorillonite nanocomposites prepared by in situ bulk polymerization
  129. Glycolytic depolymerization of PET waste in a microwave reactor
  130. Hydrolytic Depolymerization of PET in a Microwave Reactor
  131. Estimation of thermal transitions in poly(ethylene naphthalate): Experiments and modeling using isoconversional methods
  132. Synthesis and comparative study of biodegradable poly(alkylene sebacate)s
  133. Modeling of diffusion-controlled reactions in free radical solution and bulk polymerization: Model validation by DSC experiments
  134. Characterization and Crystallization Kinetics of in situ Prepared Poly(propylene terephthalate)/SiO2 Nanocomposites
  135. Thermal degradation and isoconversional kinetic analysis of light-cured dimethacrylate copolymers
  136. Chemical recycling of polymers from Waste Electric and Electronic Equipment
  137. Recycling of polymers from plastic packaging materials using the dissolution–reprecipitation technique
  138. Modeling gel effect in branched polymer systems: Free-radical solution homopolymerization of vinyl acetate
  139. Crystallization Kinetics and Melting Behaviour of the Novel Biodegradable Polyesters Poly(propylene azelate) and Poly(propylene sebacate)
  140. Effect of silica nanoparticles on solid state polymerization of poly(ethylene terephthalate)
  141. Synthesis of poly(alkylene succinate) biodegradable polyesters, Part II: Mathematical modelling of the polycondensation reaction
  142. Thermal degradation of light-cured dimethacrylate resins
  143. Water sorption isotherms and glass transition temperature of spray dried tomato pulp
  144. Copolymerization kinetics of dental dimethacrylate resins initiated by a benzoyl peroxide/amine redox system
  145. Modeling of Diffusion-Controlled Polymerization Reactions
  146. Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
  147. Chemical Recycling of Polystyrene by Pyrolysis: Potential Use of the Liquid Product for the Reproduction of Polymer
  148. Macromol. Chem. Phys. 12/2007
  149. Crystallization Kinetics of Biodegradable Poly(butylene succinate) under Isothermal and Non-Isothermal Conditions
  150. Miscibility and enzymatic degradation studies of poly(ε-caprolactone)/poly(propylene succinate) blends
  151. Effect of molecular weight on the cold-crystallization of biodegradable poly(ethylene succinate)
  152. Chemical recycling of poly(methyl methacrylate) by pyrolysis. Potential use of the liquid fraction as a raw material for the reproduction of the polymer
  153. A Review of Modeling of Diffusion Controlled Polymerization Reactions
  154. Non-Isothermal Crystallisation Kinetics of In Situ Prepared Poly(ɛ-caprolactone)/Surface-Treated SiO2 Nanocomposites
  155. Cover Picture: Macromol. Mater. Eng. 2/2007
  156. Chemical Recycling of Poly(ethylene terephthalate)
  157. Sorption kinetics of ethanol/water solution by dimethacrylate-based dental resins and resin composites
  158. Cure kinetics of epoxy–amine resins used in the restoration of works of art from glass or ceramic
  159. Effect of activated carbon black nanoparticles on solid state polymerization of poly(ethylene terephthalate)
  160. Chemical Recycling of PET by Glycolysis: Polymerization and Characterization of the Dimethacrylated Glycolysate
  161. Synthesis and biodegradation of three poly(alkylene succinate)s: mathematical modelling of the esterification reaction and the enzymatic hydrolysis
  162. Synthesis of poly(alkylene succinate) biodegradable polyesters I. Mathematical modelling of the esterification reaction
  163. Evaluation of the crystallisation kinetics of poly(propylene terephthalate) using DSC and polarized light microscopy
  164. Isothermal and non-isothermal crystallization kinetics of branched and partially crosslinked PET
  165. Reactivity of Benzoyl Peroxide/Amine System as an Initiator for the Free Radical Polymerization of Dental and Orthopaedic Dimethacrylate Monomers:  Effect of the Amine and Monomer Chemical Structure
  166. Step-scan TMDSC and high rate DSC study of the multiple melting behavior of poly(1,3-propylene terephthalate)
  167. Synthesis and comparative biodegradability studies of three poly(alkylene succinate)s
  168. The Chemical Recycling of PET in the Framework of Sustainable Development
  169. Evaluation of the Isoconversional Approach to Estimating the Hoffman-Lauritzen Parameters from the Overall Rates of Non-Isothermal Crystallization of Polymers
  170. Crystallization kinetics and nucleation activity of filler in polypropylene/surface-treated SiO2 nanocomposites
  171. Alkyd resins derived from glycolized waste poly(ethylene terephthalate)
  172. Elution study of unreacted Bis-GMA, TEGDMA, UDMA, and Bis-EMA from light-cured dental resins and resin composites using HPLC
  173. Development of a unified framework for calculating molecular weight distribution in diffusion controlled free radical bulk homo-polymerization
  174. The Chemical Recycling of PET in the Framework of Sustainable Development
  175. Melting point depression and cocrystallization behavior of poly(ethylene-co-butylene 2,6-naphthalate) copolymers
  176. Thermal expansion characteristics of light-cured dental resins and resin composites
  177. Kinetics of the Benzoyl Peroxide/Amine Initiated Free-Radical Polymerization of Dental Dimethacrylate Monomers:  Experimental Studies and Mathematical Modeling for TEGDMA and Bis-EMA
  178. Water sorption characteristics of light-cured dental resins and composites based on Bis-EMA/PCDMA
  179. Isothermal and nonisothermal crystallization kinetics of poly(propylene terephthalate)
  180. Compatibility of low-density polyethylene/poly(ethylene-co-vinyl acetate) binary blends prepared by melt mixing
  181. Study of various catalysts in the synthesis of poly(propylene terephthalate) and mathematical modeling of the esterification reaction
  182. The Effect of Oxygen on the Kinetics and Particle Size Distribution in Vinyl Chloride Emulsion Polymerization
  183. STUDY OF THE EFFECT OF TWO BPO/AMINE INITIATION SYSTEMS ON THE FREE-RADICAL POLYMERIZATION OF MMA USED IN DENTAL RESINS AND BONE CEMENTS
  184. Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis
  185. Poly(ethylene terephthalate) Recycling and Recovery of Pure Terephthalic Acid. Kinetics of a Phase Transfer Catalyzed Alkaline Hydrolysis
  186. Dynamic Simulation of Industrial Poly(vinyl chloride) Batch Suspension Polymerization Reactors
  187. A theoretical investigation of the production of branched copolymers in continuous stirred tank reactors
  188. Dynamic simulation of primary particle-size distribution in vinyl chloride polymerization
  189. On the validity of the steady-state approximations in high conversion diffusion-controlled free-radical copolymerization reactions
  190. Development of a general mathematical framework for modeling diffusion-controlled free-radical polymerization reactions
  191. Toward the Development of a General Framework for Modeling Molecular Weight and Compositional Changes in Free-Radical Copolymerization Reactions
  192. Development of a unified mathematical framework for modelling molecular and structural changes in free-radical homopolymerization reactions
  193. Modeling of diffusion-controlled free-radical polymerization reactions