All Stories

  1. CNT-reinforced adhesive joint between grit-blasted steel substrates fabricated by simple resin pre-coating method

    Article • The Journal of Adhesion, March 2017, Taylor & Francis

    Professor Xiaozhi Hu

  2. Structure design and manufacturing of layered bioceramic scaffolds for load-bearing bone reconstruction

    Article • Biomedical Materials, July 2015, Institute of Physics Publishing

    Dr Jingzhou Yang, Professor Xiaozhi Hu

  3. Residual stress and softening in welded high-strength low-alloy steel with a buffering layer

    Article • Journal of Materials Processing Technology, February 2014, Elsevier

    Professor Xiaozhi Hu

  4. Tensile overload-induced plastic deformation and fatigue behavior in weld-repaired high-strength low-alloy steel

    Article • Journal of Materials Processing Technology, November 2013, Elsevier

    Professor Xiaozhi Hu

  5. Nanoscaled Interface Between Microgold Particles and Biphase Glass-Ceramic Matrix

    Article • Journal of the American Ceramic Society, September 2013, Wiley

    Professor Xiaozhi Hu

  6. Processing and Properties of BioCeramic Coatings onto 3D Ti-Mesh by DipCasting Method

    Article • International Journal of Applied Ceramic Technology, May 2013, Wiley

    Professor Xiaozhi Hu

  7. Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement

    Article • Composites Science and Technology, March 2013, Elsevier

    Professor Xiaozhi Hu

  8. Buckling resistance of grid-stiffened carbon-fiber thin-shell structures

    Article • Composites Part B Engineering, February 2013, Elsevier

    Professor Xiaozhi Hu

  9. Novel Layered Hydroxyapatite/Tri‐Calcium Phosphate–Zirconia Scaffold Composite with High Bending Strength for Load‐Bearing Bone Implant Application

    Article • International Journal of Applied Ceramic Technology, January 2013, Wiley

    Professor Xiaozhi Hu

  10. Effect of buffer layer and notch location on fatigue behavior in welded high-strength low-alloy

    Article • Journal of Materials Processing Technology, October 2012, Elsevier

    Professor Xiaozhi Hu

  11. Microstructure characteristics and fatigue properties of welded HSLA with and without buffer layer

    Article • Materials Science and Engineering A, June 2012, Elsevier

    Professor Xiaozhi Hu

  12. Deposition of Micro‐Porous Hydroxyapatite/Tri‐Calcium Phosphate Coating on Zirconia‐Based Substrate

    Article • Journal of the American Ceramic Society, March 2012, Wiley

    Professor Xiaozhi Hu

  13. Fatigue crack growth behavior in weld-repaired high-strength low-alloy steel

    Article • Engineering Fracture Mechanics, June 2011, Elsevier

    Professor Xiaozhi Hu

  14. Closure to “Mechanism behind the Size Effect Phenomenon” by Xiaozhi Hu and Kai Duan

    Article • Journal of Engineering Mechanics, April 2011, American Society of Civil Engineers (ASCE)

    Professor Xiaozhi Hu

  15. Size effect on tensile softening relation

    Article • Materials and Structures, April 2010, Springer Science + Business Media

    Professor Xiaozhi Hu

  16. Mechanism behind the Size Effect Phenomenon

    Article • Journal of Engineering Mechanics, January 2010, American Society of Civil Engineers (ASCE)

    Professor Xiaozhi Hu

  17. Dynamic fracture analysis of adhesive bonded material under normal loading

    Article • Acta Mechanica Sinica, August 2009, Springer Science + Business Media

    Professor Xiaozhi Hu

  18. Analytical solution for the pull-out response of FRP rods embedded in steel tubes filled with cement grout

    Article • Materials and Structures, July 2009, Springer Science + Business Media

    Professor Xiaozhi Hu

  19. Stochastic elasto-plastic fracture analysis of aluminum foams

    Article • Acta Mechanica Solida Sinica, June 2009, Elsevier

    Professor Xiaozhi Hu

  20. Size effect and quasi-brittle fracture: the role of FPZ

    Article • International Journal of Fracture, November 2008, Springer Science + Business Media

    Professor Xiaozhi Hu

  21. Size effect: Influence of proximity of fracture process zone to specimen boundary

    Article • Engineering Fracture Mechanics, May 2007, Elsevier

    Professor Xiaozhi Hu

  22. Size effect on specific fracture energy of concrete

    Article • Engineering Fracture Mechanics, January 2007, Elsevier

    Professor Xiaozhi Hu

  23. Applications of Boundary Effect Model to Quasi-Brittle Fracture of Concrete and Rock

    Article • Journal of Advanced Concrete Technology, January 2005, Japan Concrete Institute

    Professor Xiaozhi Hu

  24. Application of Essential Work of Fracture Methodology to Polymer Fracture

    Article • January 2004, Elsevier

    Professor Xiaozhi Hu

  25. Boundary effect on concrete fracture and non-constant fracture energy distribution

    Article • Engineering Fracture Mechanics, November 2003, Elsevier

    Professor Xiaozhi Hu

  26. Cracking of porcelain coatings bonded to metal substrates of different modulus and hardness

    Article • Journal of Materials Research, May 2001, Cambridge University Press

    Professor Xiaozhi Hu

  27. Contact damage in porcelain/Pd-alloy bilayers

    Article • Journal of Materials Research, March 2000, Cambridge University Press

    Professor Xiaozhi Hu

  28. Size effect on toughness induced by crack close to free surface

    Article • Engineering Fracture Mechanics, January 2000, Elsevier

    Professor Xiaozhi Hu

  29. Time-dependent fracture of a two-phase brittle material

    Article • Philosophical Magazine A, August 1992, Taylor & Francis

    Professor Xiaozhi Hu

  30. Crack-Resistance Curve and Cyclic Fatigue in Ceramic Materials

    Article • January 1992, Springer Science + Business Media

    Professor Xiaozhi Hu

  31. Compliance analysis of a bridged crack under monotonic and cyclic loading

    Article • Journal of the European Ceramic Society, January 1992, Elsevier

    Professor Xiaozhi Hu

  32. Crack Tip Shielding in Ceramic and Cementitious Materials Subjected to Monotonic and Cyclic Loading

    Article • Applied Mechanics Reviews, January 1992, ASME International

    Professor Xiaozhi Hu

  33. An analytical method to determine the bridging stress transferred within the fracture process zone: I, general theory

    Article • Cement and Concrete Research, November 1991, Elsevier

    Professor Xiaozhi Hu

  34. Fracture process zone in cementitious materials

    Article • International Journal of Fracture, September 1991, Springer Science + Business Media

    Professor Xiaozhi Hu

  35. Fracture process zone in cementitious materials

    Article • January 1991, Springer Science + Business Media

    Professor Xiaozhi Hu

  36. A statistical theory of time-dependent fracture for cementitious materials subjected to cyclic loading

    Article • Journal of Materials Science, September 1989, Springer Science + Business Media

    Professor Xiaozhi Hu