All Stories

  1. Erratum to: Visualization of osseointegration of maxilla and mandible dental implants

    Article • International Journal of Computer Assisted Radiology and Surgery, April 2015, Springer Science + Business Media

    Professor James C. Earthman

  2. Finite Element Analysis of Quantitative Percussion Diagnostics for Evaluating the Strength of Bonds Between Composite Laminates

    Article • February 2015, Wiley

    Professor James C. Earthman

  3. Static stretch affects neural stem cell differentiation in an extracellular matrix-dependent manner

    Article • Scientific Reports, February 2015, Springer Science + Business Media

    Professor James C. Earthman

  4. Finite Element Analysis of Quantitative Percussion Diagnostics for Evaluating the Strength of Bonds Between Composite Laminates

    Article • January 2015, DEStech Publications

    Professor James C. Earthman

  5. Corrigendum to “Inverse Hall–Petch behavior in diamantane stabilized bulk nanocrystalline aluminum” [Acta Mater. 60 (2012) 5850–5857]

    Article • Acta Materialia, October 2014, Elsevier

    Professor James C. Earthman

  6. An in vitro comparison of quantitative percussion diagnostics with a standard technique for determining the presence of cracks in natural teeth

    Article • Journal of Prosthetic Dentistry, August 2014, Elsevier

    Professor James C. Earthman

  7. Analysis of “Kiss” Bonds Between Composite Laminates

    Article • JOM, April 2014, Springer Science + Business Media

    Professor James C. Earthman

  8. Fatigue Crack Nucleation Studies on Sulfuric Acid Anodized 7075-T73 Aluminum

    Article • Journal of Materials Engineering and Performance, April 2014, Springer Science + Business Media

    Professor James C. Earthman

  9. Spark production by abrasion of titanium alloys in golf club heads

    Article • Fire and Materials, February 2014, Wiley

    Professor James C. Earthman

  10. Development of Percussion Diagnostics in Evaluating ‘Kiss’ Bonds between Composite Laminates

    Article • January 2014, Wiley

    Professor James C. Earthman

  11. Stress relaxation behavior of tessellated cartilage from the jaws of blue sharks

    Article • Journal of the Mechanical Behavior of Biomedical Materials, January 2014, Elsevier

    Professor James C. Earthman

  12. Closed-Loop Sidestreams for Investigating Corrosion Control Using Regenerative Biofilms (CCURB) in Service Water Systems

    Article • October 2013, Wiley

    Professor James C. Earthman

  13. Analysis of percussion response of dental implants: An in vitro study

    Article • Materials Science and Engineering C, July 2013, Elsevier

    Professor James C. Earthman

  14. Evaluation of Fatigue Life of Asphalt Mixture with High RAP Content Utilizing Innovative Scanning Method

    Article • June 2013, American Society of Civil Engineers (ASCE)

    Professor James C. Earthman

  15. Quantitative Percussion Diagnostics and Bone Density Analysis of the Implant-Bone Interface in a Pre- and Postmortem Human Subject

    Article • The International Journal of Oral & Maxillofacial Implants, January 2013, Quintessence Publishing

    Professor James C. Earthman

  16. In Vivo Evaluation of Quantitative Percussion Diagnostics for Determining Implant Stability

    Article • The International Journal of Oral & Maxillofacial Implants, January 2013, Quintessence Publishing

    Professor James C. Earthman

  17. Scanning Laser Detection System Used to Measure Propagation of Fatigue Damage of Asphalt Mixes

    Article • Transportation Research Record Journal of the Transportation Research Board, December 2012, Transportation Research Board

    Professor James C. Earthman

  18. Inverse Hall–Petch behavior in diamantane stabilized bulk nanocrystalline aluminum

    Article • Acta Materialia, September 2012, Elsevier

    Professor James C. Earthman

  19. Thermal stability of cryomilled nanocrystalline aluminum containing diamantane nanoparticles

    Article • Journal of Materials Science, November 2011, Springer Science + Business Media

    Professor James C. Earthman

  20. A comparison of the marginal adaptation of cathode-arc vapor-deposited titanium and cast base metal copings

    Article • Journal of Prosthetic Dentistry, June 2011, Elsevier

    Professor James C. Earthman

  21. Composite model of the shark's skeleton in bending: A novel architecture for biomimetic design of functional compression bias

    Article • Materials Science and Engineering C, October 2010, Elsevier

    Professor James C. Earthman

  22. Influence of electrical discharged machining and surface defects on the fatigue strength of electrodeposited nanocrystalline Ni

    Article • International Journal of Fatigue, March 2010, Elsevier

    Professor James C. Earthman

  23. Grain Structure at Crack Path in Fatigued Nano-Crystalline Ni

    Article • Microscopy and Microanalysis, July 2009, Cambridge University Press

    Professor James C. Earthman

  24. Fractographs of Bending Fatigued Electrodeposited Nano-Crystalline Ni

    Article • Microscopy and Microanalysis, August 2008, Cambridge University Press

    Professor James C. Earthman

  25. Possible origin of superior corrosion resistance for electrodeposited nanocrystalline Ni

    Article • Scripta Materialia, August 2008, Elsevier

    Professor James C. Earthman

  26. Corrosion of Type 7075-T73 Aluminum in a 10% HNO3 + Fe2(SO4)3 Deoxidizer Solution

    Article • Journal of Materials Engineering and Performance, July 2008, Springer Science + Business Media

    Professor James C. Earthman

  27. Design and Evaluation of Bioepoxy-Flax Composites for Printed Circuit Boards

    Article • IEEE Transactions on Electronics Packaging Manufacturing, July 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor James C. Earthman

  28. Encrustation of nanostructured Ti in a simulated urinary tract environment

    Article • Materials Science and Engineering C, April 2008, Elsevier

    Professor James C. Earthman

  29. Surface Characterization of 7075-T73 Aluminum Exposed to Anodizing Pretreatment Solutions

    Article • Journal of Materials Engineering and Performance, March 2008, Springer Science + Business Media

    Professor James C. Earthman

  30. Biological Functionalization of a Sol–Gel Coating for the Mitigation of Microbial-induced Corrosion

    Article • Advanced Functional Materials, January 2008, Wiley

    Professor James C. Earthman

  31. The Effect of Electrical Discharge Machining on Electro-Deposited Nano-Crystalline Ni Sheet

    Article • Microscopy and Microanalysis, August 2007, Cambridge University Press

    Professor James C. Earthman

  32. Renewable-resource Printed Wiring Board Design using Natural Fibers and a Bio-based Thermosetting Matrix

    Article • May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor James C. Earthman

  33. In Vivo Monitoring of Osseointegration

    Article • January 2007, ASME International

    Professor James C. Earthman

  34. Effect of bone density on the damping behavior of dental implants: An in vitro method

    Article • Materials Science and Engineering C, September 2006, Elsevier

    Professor James C. Earthman

  35. Review of Protein Status and Body Composition After Gastric Bypass Surgery and Very-Low-Calorie Diet Therapy

    Article • Bariatric Nursing and Surgical Patient Care, September 2006, Mary Ann Liebert Inc

    Professor James C. Earthman

  36. Reconstructive Materials and Bone Tissue Engineering in Implant Dentistry

    Article • Dental Clinics of North America, April 2006, Elsevier

    Professor James C. Earthman

  37. Evaluation of reflected time-energy profile for determination of damping capacity

    Article • The Journal of the Acoustical Society of America, January 2006, Acoustical Society of America (ASA)

    Professor James C. Earthman

  38. Instrumentation for Determining the Local Damping Capacity in Honeycomb Sandwich Composites

    Article • Journal of Testing and Evaluation, January 2006, ASTM International

    Professor James C. Earthman

  39. Percussion Probe Analysis of Implant Stability and Structural Defects in Biological Tissues

    Article • January 2006, ASME International

    Professor James C. Earthman

  40. Production and Characterization of Aluminium NbAl3 Composite by Mechanical Alloying and In Situ - A Process Comparison

    Article • November 2005, CrossRef Test Account

    Professor James C. Earthman, Dr Severino Urtiga Filho

  41. Production and Characterization of Aluminium NbAl3 Composite by Mechanical Alloying and In Situ - A Process Comparison

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor James C. Earthman, Dr Severino Urtiga Filho

  42. Lithium fluoride material properties as applied on the NIRCam instrument

    Article • August 2005, SPIE

    Professor James C. Earthman

  43. Light scattering diagnostics for metal fatigue detection and life estimation

    Article • August 2005, SPIE

    Professor James C. Earthman

  44. Corrosion evaluation of wear tested nitinol wire

    Article • Materials Science and Engineering C, May 2005, Elsevier

    Professor James C. Earthman

  45. Laser scanning technique for fatigue damage evolution detection

    Article • February 2005, SPIE

    Professor James C. Earthman

  46. Tissue engineering in dentistry

    Article • Clinics in Plastic Surgery, October 2003, Elsevier

    Professor James C. Earthman

  47. The Effect of Heat Treatment on the Corrosion Resistance of 440C Stainless Steel in 20% HNO3 + 2.5% Na2Cr2O7 Solution

    Article • Journal of Materials Engineering and Performance, April 2003, Springer Science + Business Media

    Professor James C. Earthman

  48. Microbiologically Influenced Corrosion

    Article • February 2003, Wiley

    Professor James C. Earthman

  49. Synthesis of Diamond Reinforced Al-Mg Nanocrystalline Composite Powder Using Ball Milling

    Article • Materials Science Forum, February 2003, Trans Tech Publications

    Professor James C. Earthman, Dr Severino Urtiga Filho

  50. The colonization of mild steel surfaces by a certain strain of bacteria can reduce corrosion rates.

    Article • CORROSION, May 2002, NACE International

    Professor James C. Earthman

  51. Creep rupture mechanisms in annealed and overheated 7075 Al under multiaxial stress states

    Article • Metallurgical and Materials Transactions A, November 2000, Springer Science + Business Media

    Professor James C. Earthman

  52. Fatigue and Stress Analysis of a Novel Test Coupon Geometry Developed for Hydraulic Pressure Impulse Testing

    Article • Journal of Testing and Evaluation, January 2000, ASTM International

    Professor James C. Earthman

  53. The influence of bacteria on the passive film stability of 304 stainless steel

    Article • Electrochimica Acta, September 1999, Elsevier

    Professor James C. Earthman

  54. Fatigue properties of 2024-T3, 7075-T6 aluminum alloys modified using plasma-enhanced ion beams

    Article • Theoretical and Applied Fracture Mechanics, July 1999, Elsevier

    Professor James C. Earthman

  55. Formation of cavity stringers during superplastic deformation

    Article • Acta Materialia, June 1998, Elsevier

    Professor James C. Earthman

  56. Finite element analysis of cavitating facet interaction in a fully lamellar titanium aluminide alloy under creep conditions

    Article • Metallurgical and Materials Transactions A, March 1998, Springer Science + Business Media

    Professor James C. Earthman

  57. Finite element analysis of cavitating facet interaction in a fully lamellar titanium aluminide alloy under creep conditions

    Article • Metallurgical and Materials Transactions A, March 1998, Springer Science + Business Media

    Professor James C. Earthman

  58. Dislocation fiber interactions in short fiber reinforced metal matrix composites during creep and during thermal cycling

    Article • Scripta Materialia, December 1997, Elsevier

    Professor James C. Earthman

  59. Numerical models of creep cavitation in single phase, dual phase and fully lamellar titanium aluminide

    Article • Acta Materialia, November 1997, Elsevier

    Professor James C. Earthman

  60. Mechanisms of high temperature deformation and rupture under multiaxial loading conditions. Final progress report, July 1, 1996--June 30, 1997

    Article • October 1997, Office of Scientific and Technical Information (OSTI)

    Professor James C. Earthman

  61. Compressive creep behavior of spray-formed gamma titanium aluminide

    Article • Metallurgical and Materials Transactions A, September 1997, Springer Science + Business Media

    Professor James C. Earthman

  62. Characterization of Low-cycle Fatigue Damage in Inconel 718 by Laser Light Scanning

    Article • Journal of Materials Research, August 1997, Cambridge University Press

    Professor James C. Earthman

  63. Axenic aerobic biofilms inhibit corrosion of SAE 1018 steel through oxygen depletion

    Article • Applied Microbiology and Biotechnology, July 1997, Springer Science + Business Media

    Professor James C. Earthman

  64. Importance of biofilm formation for corrosion inhibition of SAE 1018 steel by axenic aerobic biofilms

    Article • Journal of Industrial Microbiology & Biotechnology, June 1997, Springer Science + Business Media

    Professor James C. Earthman

  65. Numerical models of creep and boundary sliding mechanisms in single-phase, dual-phase, and fully lamellar titanium aluminide

    Article • Metallurgical and Materials Transactions A, April 1997, Springer Science + Business Media

    Professor James C. Earthman

  66. High-temperature crack growth in 304 stainless steel under mixed-mode loading conditions

    Article • Metallurgical and Materials Transactions A, March 1997, Springer Science + Business Media

    Professor James C. Earthman

  67. High-temperature crack growth in 304 stainless steel under mixed-mode loading conditions

    Article • Metallurgical and Materials Transactions A, March 1997, Springer Science + Business Media

    Professor James C. Earthman

  68. Corrosion inhibition by aerobic biofilms on SAE 1018 steel

    Article • Applied Microbiology and Biotechnology, January 1997, Springer Science + Business Media

    Professor James C. Earthman

  69. Abstracts

    Article • Implant Dentistry, January 1997, Wolters Kluwer Health

    Professor James C. Earthman

  70. Tooth intrusion in implant-assisted prostheses

    Article • Journal of Prosthetic Dentistry, January 1997, Elsevier

    Professor James C. Earthman

  71. High temperature rupture of an SiC particulate reinforced Al composite under multiaxial stress states

    Article • Materials Science and Engineering A, August 1996, Elsevier

    Professor James C. Earthman

  72. Two dimensional modeling of momentum and thermal behavior during spray atomization of γ-TiAl

    Article • Acta Materialia, June 1996, Elsevier

    Professor James C. Earthman

  73. Foreword

    Article • Metallurgical and Materials Transactions A, April 1996, Springer Science + Business Media

    Professor James C. Earthman

  74. Effect of Fe on ductility and cavitation in the superplastic Zn-22 Pct Al eutectoid

    Article • Metallurgical and Materials Transactions A, April 1996, Springer Science + Business Media

    Professor James C. Earthman

  75. Damage mechanics approach for predicting high-temperature crack growth under mixed-mode loading conditions

    Article • Materials Science and Engineering A, November 1995, Elsevier

    Professor James C. Earthman

  76. Elevated-temperature deformation mechanisms in Ni3Al

    Article • Materials Science and Engineering A, February 1995, Elsevier

    Professor James C. Earthman

  77. Development of a scanning laser crack detection technique for corrosion fatigue testing of fine wire

    Article • Journal of Materials Research, February 1995, Cambridge University Press

    Professor James C. Earthman

  78. Development of a Novel Specimen Geometry for Fatigue Testing of Fine Wire

    Article • Journal of Testing and Evaluation, January 1995, ASTM International

    Professor James C. Earthman

  79. Creep characteristics of single crystalline Ni3Al(Ta,B)

    Article • Metallurgical and Materials Transactions A, November 1994, Springer Science + Business Media

    Professor James C. Earthman

  80. Effect of grain shape and texture on equi-biaxial creep of stress relieved and recrystallized zircaloy-4

    Article • Acta Metallurgica et Materialia, November 1994, Elsevier

    Professor James C. Earthman

  81. Cavitation and cavity-induced fracture during superplastic deformation

    Article • Journal of Materials Science, November 1994, Springer Science + Business Media

    Professor James C. Earthman

  82. The effect of impurities on ductility and cavitation in the superplastic Zn-22%Al alloy

    Article • Materials Science and Engineering A, November 1994, Elsevier

    Professor James C. Earthman

  83. Effects of grain-shape anisotropy and texture on balanced-biaxial creep of Ti and Zr alloys

    Article • JOM, October 1994, Springer Science + Business Media

    Professor James C. Earthman

  84. Novel instrumentation for quantitative determination of energy damping in materials and structures

    Article • Scripta Metallurgica et Materialia, August 1994, Elsevier

    Professor James C. Earthman

  85. Microstructure and cavitation in the superplastic Zn-22 wt% Al alloy: Effect of solution heat treatment

    Article • Philosophical Magazine Letters, July 1994, Taylor & Francis

    Professor James C. Earthman

  86. Effect of Cd on superplastic flow in the Pb-62 wt% Sn eutectic

    Article • Philosophical Magazine A, June 1994, Taylor & Francis

    Professor James C. Earthman

  87. Effect of particulate type on fatigue crack propagation in AlLi based spray deposited metal matrix compositesGupta, M., Bowo, K., Lavernia, E.J. and Earthman, J.C. Scr Metall Mater (1 May 1993) 28 (9), 1053–1058

    Article • International Journal of Fatigue, June 1994, Elsevier

    Professor James C. Earthman

  88. Effect of environment on the rupture behavior of alloys 909 and 718

    Article • Materials Science and Engineering A, April 1994, Elsevier

    Professor James C. Earthman

  89. High temperature deformation and fracture mechanisms in a dendritic Ni3Al alloy

    Article • Acta Metallurgica et Materialia, March 1994, Elsevier

    Professor James C. Earthman

  90. Numerical Model of Primary Creep Deformation in a Novel Double Shear Specimen

    Article • Journal of Testing and Evaluation, January 1994, ASTM International

    Professor James C. Earthman

  91. Natural tooth intrusion and reversal in implant-assisted prosthesis: Evidence of and a hypothesis for the occurrence

    Article • Journal of Prosthetic Dentistry, December 1993, Elsevier

    Professor James C. Earthman

  92. High temperature creep transitions in single crystalline Ni3Al(Ta, B)

    Article • Journal of Materials Research, October 1993, Cambridge University Press

    Professor James C. Earthman

  93. Effect of particulate type on fatigue crack propagation in AlLi based spray deposited metal matrix composites

    Article • Scripta Metallurgica et Materialia, May 1993, Elsevier

    Professor James C. Earthman

  94. On the mechanism of grain formation during spray atomization and deposition

    Article • Acta Metallurgica et Materialia, November 1992, Elsevier

    Professor James C. Earthman

  95. Grain boundary sliding in Ni3Al(Ta,B) bicrystals

    Article • Scripta Metallurgica et Materialia, October 1992, Elsevier

    Professor James C. Earthman

  96. Mechanisms of intergranular cavity growth in Ni3Al (Zr, B)

    Article • Acta Metallurgica et Materialia, August 1992, Elsevier

    Professor James C. Earthman

  97. High temperature creep behavior of polycrystalline Ni3Al(Zr,B)

    Article • Scripta Metallurgica et Materialia, June 1992, Elsevier

    Professor James C. Earthman

  98. A comparison of techniques for determining the volume fraction of particulates in metal matrix composites

    Article • Materials Characterization, June 1992, Elsevier

    Professor James C. Earthman

  99. Primary dendrite arm spacings and tip radii in directionally solidified Ni3Al

    Article • Materials Science and Engineering A, May 1992, Elsevier

    Professor James C. Earthman

  100. Microstructure and elevated temperature behavior of a spray-atomized and co-deposited Ni3Al/SiC/TiB2 intermetallic matrix composite

    Article • Materials Science and Engineering A, May 1992, Elsevier

    Professor James C. Earthman

  101. Directional solidification of Ni3Al

    Article • Acta Metallurgica et Materialia, April 1992, Elsevier

    Professor James C. Earthman

  102. Primary dendrite arm spacings and tip radii in directionally solidified Ni3Al

    Article • January 1992, Elsevier

    Professor James C. Earthman

  103. Microstructure and elevated temperature behavior of a spray-atomized and co-deposited Ni3Al/SiC/TiB2 intermetallic matrix composite

    Article • January 1992, Elsevier

    Professor James C. Earthman

  104. High-temperature rupture of microstructurally unstable 304 stainless steel under uniaxial and triaxial stress states

    Article • November 1991, Springer Science + Business Media

    Professor James C. Earthman

  105. Characterization of small crack growth in 12% CrMoV steel under high temperature, low cycle fatigue conditions

    Article • Materials Science and Engineering A, February 1991, Elsevier

    Professor James C. Earthman

  106. A Novel Specimen Geometry for Double Shear Creep Experiments

    Article • Journal of Testing and Evaluation, January 1991, ASTM International

    Professor James C. Earthman

  107. Mechanical Behavior and Cavitation in Commercial and High Purity Zn-22% Al

    Article • MRS Proceedings, January 1990, Cambridge University Press

    Professor James C. Earthman

  108. Creep crack growth and cavitation damage in a 12% CrMoV steel

    Article • Acta Metallurgica, October 1989, Elsevier

    Professor James C. Earthman

  109. The principal facet stress as a parameter for predicting creep rupture under multiaxial stresses

    Article • Acta Metallurgica, April 1989, Elsevier

    Professor James C. Earthman

  110. Deformation and damage processes in a 12%CrMoV steel under high temperature low cycle fatigue conditions in air and vacuum

    Article • Materials Science and Engineering A, March 1989, Elsevier

    Professor James C. Earthman

  111. Microstructural study of creep rupture in a 12% chromium ferritic steel

    Article • Acta Metallurgica, January 1989, Elsevier

    Professor James C. Earthman

  112. Simulations of stable crack propagation based on cavity growth by coupled diffusional and creep processes

    Article • Acta Metallurgica, July 1987, Elsevier

    Professor James C. Earthman

  113. Characterizations of high temperature crack growth in copper and Cu + 1 wt% Sb under different loading conditions

    Article • Acta Metallurgica, February 1987, Elsevier

    Professor James C. Earthman

  114. High temperature intergranular crack growth processes in copper and copper with 1 wt% antimony

    Article • Acta Metallurgica, May 1985, Elsevier

    Professor James C. Earthman

  115. Fatigue damage precursor detection and monitoring with laser scanning technique

    Article • Springer Science + Business Media

    Professor James C. Earthman

  116. Optical Detection and Discrimination of Fatigue and Damage in Engineering Materials

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Professor James C. Earthman

  117. Use of Computer Systems in High-Temperature Crack Growth Studies

    Article • ASTM International

    Professor James C. Earthman