All Stories

  1. Shape memory behavior and physical properties of peroxide X-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites

    Article • January 2023, American Institute of Physics

    Dr Mehmet Kodal, Professor Guralp Ozkoc

  2. Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour”

    Article • January 2020, American Institute of Physics

    Professor Guralp Ozkoc

  3. Preparation, characterization, and in vitro evaluation of chicken feather fiber-thermoplastic polyurethane composites

    Article • Journal of Applied Polymer Science, June 2017, Wiley

    Professor Guralp Ozkoc

  4. Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites

    Article • Polymer Composites, April 2017, Wiley

    MUSTAFA ÖZGÜR BORA, Professor Guralp Ozkoc

  5. Non-isothermal crystallization kinetics and dynamic mechanical properties of poly(Butylene succinate) nanocomposites with different type of carbonaceous nanoparticles

    Article • Polymer Composites, November 2016, Wiley

    Professor Guralp Ozkoc, Dr Mehmet Kodal

  6. Non-isothermal crystallization kinetics of PEG plasticized PLA/G-POSS nanocomposites

    Article • Polymer Composites, July 2015, Wiley

    Professor Guralp Ozkoc

  7. Dual effect of chemical modification and polymer precoating of flax fibers on the properties of short flax fiber/poly(lactic acid) composites

    Article • Journal of Applied Polymer Science, July 2015, Wiley

    Professor Guralp Ozkoc

  8. Mechanical and Morphological Properties of Buckminster Fullerene (C60) Added Glass Fiber Reinforced Polyamide 66 Multiscale Composites

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Professor Guralp Ozkoc, Ikilem Gocek

  9. Effect of Fiber Content on Failure Modes of Glass Fiber Reinforced Injection Molded Polyamide 66 Composites

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Professor Guralp Ozkoc, Ikilem Gocek

  10. Effects of halloysite nanotubes on the performance of plasticized poly(lactic acid)-based composites

    Article • Polymer Composites, April 2015, Wiley

    Professor Guralp Ozkoc

  11. The influence of POSS type on the properties of PLA

    Article • Polymer Composites, November 2014, Wiley

    Professor Guralp Ozkoc

  12. The Effects of Thermomechanical Cycles on the Properties of PLA/TPS Blends

    Article • Advances in Polymer Technology, August 2014, Wiley

    Professor Guralp Ozkoc, Dr Basak Tuna

  13. Properties of talc/wollastonite/polyamide 6 hybrid composites

    Article • Polymer Composites, April 2014, Wiley

    Professor Guralp Ozkoc, Dr Mehmet Kodal

  14. Effects of screw speed on the properties of plasticized PLA/POSS composites

    Article • January 2014, American Institute of Physics

    Professor Guralp Ozkoc

  15. Fracture toughness analysis of O-POSS/PLA composites assessed by essential work of fracture method

    Article • Composites Part B Engineering, January 2014, Elsevier

    Professor Guralp Ozkoc

  16. Reactive compatibilization of PLA/TPU blends with a diisocyanate

    Article • Journal of Applied Polymer Science, December 2013, Wiley

    Professor Guralp Ozkoc

  17. POSS reinforced PET based composite fibers: “Effect of POSS type and loading level”

    Article • Composites Part B Engineering, October 2013, Elsevier

    Professor Guralp Ozkoc

  18. Thoughening of poly(lactic acid) with silicone rubber

    Article • Polymer Engineering & Science, September 2013, Wiley

    Professor Guralp Ozkoc

  19. Properties of modified ethylene terpolymer/poly(lactic acid) blends based films

    Article • Fibers and Polymers, September 2013, Springer Science + Business Media

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  20. A modified method for processing and characterization of organoclay-based poly(ethylene terephthalate) nanocomposite fibers

    Article • Polymer Composites, May 2013, Wiley

    Professor Guralp Ozkoc

  21. Effects of reactive and nonreactive POSS types on the mechanical, thermal, and morphological properties of plasticized poly(lactic acid)

    Article • Polymer Engineering & Science, March 2013, Wiley

    Professor Guralp Ozkoc

  22. Effects of a diisocyanate compatibilizer on the properties of citric acid modified thermoplastic starch/poly(lactic acid) blends

    Article • Polymer Engineering & Science, February 2013, Wiley

    Professor Guralp Ozkoc

  23. Micro and Nanofillers in Rubbers

    Article • January 2013, Springer Science + Business Media

    Professor Guralp Ozkoc

  24. Use of Halloysite Nanotubes for the Production of Poly (lactic acid) Nanocomposites

    Article • MRS Proceedings, January 2013, Cambridge University Press

    Professor Guralp Ozkoc

  25. Investigation of erosive wear behavior and physical properties of SGF and/or calcite reinforced ABS/PA6 composites

    Article • Composites Part B Engineering, January 2013, Elsevier

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  26. Plasticized and unplasticized PLA/organoclay nanocomposites: Short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior

    Article • Journal of Applied Polymer Science, September 2011, Wiley

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  27. Effects of POSS particles on the mechanical, thermal, and morphological properties of PLA and Plasticised PLA

    Article • Journal of Applied Polymer Science, February 2011, Wiley

    Professor Guralp Ozkoc

  28. Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites

    Article • Journal of Polymers and the Environment, August 2010, Springer Science + Business Media

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  29. Properties of thermally conductive micro and nano size boron nitride reinforced silicon rubber composites

    Article • Thermochimica Acta, February 2010, Elsevier

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  30. Morphology, biodegradability, mechanical, and thermal properties of nanocomposite films based on PLA and plasticized PLA

    Article • Journal of Applied Polymer Science, November 2009, Wiley

    Professor Guralp Ozkoc

  31. Interfacial strength in short glass fiber reinforced acrylonitrile‐butadiene‐styrene/polyamide 6 blends

    Article • Polymer Composites, February 2009, Wiley

    Professor Cevdet Kaynak, Professor Guralp Ozkoc

  32. Thermally conductive boron nitride/SEBS/EVA ternary composites: “Processing and characterization”

    Article • Polymer Composites, January 2009, Wiley

    Professor Guralp Ozkoc, Prof.Dr Ayse Aytac

  33. Production of poly(lactic acid)/organoclay nanocomposite scaffolds by microcompounding and polymer/particle leaching

    Article • Polymer Composites, January 2009, Wiley

    Professor Guralp Ozkoc

  34. Impact essential work of fracture toughness of ABS/polyamide-6 blends compatibilized with olefin based copolymers

    Article • Journal of Materials Science, February 2008, Springer Science + Business Media

    Professor Guralp Ozkoc

  35. Microcompounding of organoclay–ABS/PA6 blend-based nanocomposites

    Article • Polymer Composites, January 2008, Wiley

    Professor Guralp Ozkoc

  36. Effects of olefin-based compatibilizers on the morphology, thermal and mechanical properties of ABS/polyamide-6 blends

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Guralp Ozkoc

  37. Effects of microcompounding process parameters on the properties of ABS/polyamide-6 blends based nanocomposites

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Guralp Ozkoc

  38. Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene)

    Article • Journal of Adhesion Science and Technology, January 2007, Taylor & Francis

    Professor Guralp Ozkoc

  39. Short glass fiber reinforced ABS and ABS/PA6 composites: Processing and characterization

    Article • Polymer Composites, January 2005, Wiley

    Professor Guralp Ozkoc

  40. Effects of polyamide 6 incorporation to the short glass fiber reinforced ABS composites: an interfacial approach

    Article • Polymer, December 2004, Elsevier

    Professor Guralp Ozkoc

  41. Processing and Characterization of Short Glass Fiber/ABS/Polyamide-6 Composites

    Article • MRS Proceedings, January 2004, Cambridge University Press

    Professor Guralp Ozkoc

  42. Improvement Of Adhesion Between Poly(tetrafluoroethylene) And Poly(Ethylene Terephthalate) Films

    Article • Brill

    Professor Guralp Ozkoc