All Stories

  1. Densification behavior and microstructure of spark plasma sintered alumina–mullite nano-composite
  2. Origin of dielectric loss in Ba(Co1/3 Nb2/3 )O3 microwave ceramics
  3. Effect of polyethylenimine addition and washing on stability and electrophoretic deposition of Co3 O4 nanoparticles
  4. Effect of annealing time on structural and microwave dielectric characteristics of Li2ZnTi3O8 ceramics
  5. Preparation and characterization of multilayer mesoporous γ-alumina membrane obtained via sol-gel using new precursors
  6. Microwave sintering of nanopowder ZnNb2O6: Densification, microstructure and microwave dielectric properties
  7. Sintering behavior and microwave dielectric properties of nano zinc niobate powder
  8. Micro-porous silica–yttria membrane by sol–gel method: Preparation and characterization
  9. A new temperature stable microwave dielectric ceramic with low-sintering temperature in Li2TiO3–Li2Zn3Ti4O12 system
  10. Crystallization kinetics and growth mechanism of Pb(Zr0.52·Ti0.48)O3 nanopowders
  11. RETRACTED: Microstructure development and phase evolution of alumina–mullite nanocomposite
  12. A comparative study of ZnNb2O6 nanoceramics synthesized by high energy ball milling and subsequent conventional and microwave annealing
  13. Reaction sintering of nano-sized ZnO–Nb2O5 powder mixture: sintering, microstructure and microwave dielectric properties
  14. Fabrication and dielectric properties of Pb(Zr0.52Ti0.48)O3 nanofibers-cement composites
  15. Microwave dielectric properties of Li2ZnTi3O8 ceramics prepared by reaction-sintering process
  16. Phase analysis and improvement of quality factor of Li2ZnTi3O8 ceramics by annealing treatment
  17. The effects of nanoscale expansive agents on the mechanical properties of non-shrink cement-based composites: The influence of nano-MgO addition
  18. Role of Nano- and Micron-Sized Particles of TiO2Additive on Microwave Dielectric Properties of Li2ZnTi3O8- 4 wt% TiO2Ceramics
  19. Low temperature cofirable Li2Zn3Ti4O12 microwave dielectric ceramic with Li2O–ZnO–B2O3 glass additive
  20. Synthesis and characterization of alumina supported sub-nanoporous SiO2–10wt%TiO2 membrane for nitrogen separation
  21. Polyacrylamide gel synthesis and sintering of Mg2SiO4:Eu3+nanopowder
  22. Synthesis of nano- alumina powder from impure kaolin and its application for arsenite removal from aqueous solutions
  23. In-situ fabrication of Al2O3–SiC nanocomposites using B2O3 as sintering aid
  24. Tunable Wettability and Rewritable Wettability-Gradient in Self-Cleaning Composites Containing Nanoscale Photocatalysts
  25. Synthesis and characterization of PB(ZR0.52, TI0.48)O3 nanofibers by electrospinning, and dielectric properties of PZT-Resin composite
  26. Mechanical properties and wear behavior of Al–2wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion
  27. Nano encapsulation of hematite into silica matrix as a red inclusion ceramic pigment
  28. Effect of Sm2O3 on the microstructure and electrical properties of SnO2-based varistors
  29. Pressureless sintering of B4C–TiB2 composites with Al additions
  30. Hot Extrusion Process Effect on Mechanical Behavior of Stir Cast Al Based Composites Reinforced with Mechanically Milled B4C Nanoparticles
  31. Investigation of Mechanical Behavior of Stir Casted Al Based Composites Reinforced With B4C Nanoparticles
  32. Effect of Milling and B4C Nanoparticles on the Mechanical Properties of Nanostructured Aluminum Composite Produced by Mechanical Milling and Hot Extrusion
  33. Preparation and investigation of Al–4 wt % B4C nanocomposite powders using mechanical milling
  34. Wear Behavior of Nanostructured Al and Al–B4C Nanocomposites Produced by Mechanical Milling and Hot Extrusion
  35. The Compaction, Sintering, and Mechanical Properties of Al2O3-CeO2Composite Nanopowders
  36. (Co, Nb, Sm)-Doped Tin Dioxide Varistor Ceramics Sintered Using Nanopowders Prepared by Coprecipitation Method
  37. Synthesis of high surface area Al2O3–CeO2 composite nanopowder via inverse co-precipitation method
  38. A comparative study of microstructural development in the sol–gel derived alumina–mullite nanocomposites using colloidal silica and tetraethyl orthosilicate
  39. Precursor content assessment and its influence on the optical interference of a nano-sized mica-hematite pearlescent pigment
  40. Modeling and optimization of densification of nanocrystalline Al2O3 powder prepared by a sol–gel method using response surface methodology
  41. Compressibility and sinterability of Al2O3–YAG nanocomposite powder synthesized by an aqueous sol–gel method
  42. In situ preparation of Al2O3–SiC nanocomposites via sol–gel method followed by pressureless sintering
  43. Synthesis of nanosized (Co, Nb, Sm)-doped SnO2 powders using co-precipitation method
  44. Sol–gel synthesis and characterization of Al2O3–CeO2 composite nanopowder
  45. Properties of sol–gel derived Al2O3–15wt.% ZrO2 (3mol% Y2O3) nanopowders using two different precursors
  46. Pressureless sintering of boron carbide
  47. Effect of cobalt oxide on the sintering and grain growth of Al2O3-YAG composite nanopowder
  48. Economical synthesis of Al2O3 nanopowder using a precipitation method
  49. Gelcasting of alumina–zirconia–yttria nanocomposites with Na-alginate system
  50. Pressureless Sintering of Apatite/Wollastonite-Phlogopite Glass-Ceramics
  51. Gelcasting of alumina nanopowders based on gelation of sodium alginate
  52. Effect of Al addition on pressureless sintering of B4C
  53. The effect of zirconia content on properties of Al2O3–ZrO2 (Y2O3) composite nanopowders synthesized by aqueous sol–gel method
  54. Effect of yttria on crystallization and microstructure of an alumina–YAG fiber prepared by aqueous sol–gel process
  55. An alumina–YAG nanostructured fiber prepared from an aqueous sol–gel precursor: Preparation, rheological behavior and spinnability
  56. Effects of Milling and Calcination Temperature on the Compressibility and Sinterability of a Nanocrystalline Al2O3-Y3Al5O12Composite Powder
  57. Economical synthesis of nano alumina powder using an aqueous sol–gel method
  58. An in situ (W,Ti)C–Ni composite fabricated by SHS method
  59. Optimization of the synthesis of a nano-sized mica-hematite pearlescent pigment
  60. Synthesis of an alumina–YAG nanopowder via sol–gel method
  61. Effective factors on synthesis of the hematite–silica red inclusion pigment
  62. Effect of B2O3 on crystallization behavior and microstructure of MgO–SiO2–Al2O3–K2O–F glass–ceramics
  63. Production of boron carbide powder by carbothermic reduction from boron oxide and petroleum coke or carbon active
  64. An alumina mat with a nano microstructure prepared by centrifugal spinning method
  65. Preparation and characterisation of zinc yellow pigment for low temperature ceramic glaze – Part II: the effects of reaction temperature and thermal treatment
  66. Synthesis of boron carbide powder by a carbothermic reduction method
  67. An in situ WC–Ni composite fabricated by the SHS method
  68. Effect of ethylene–vinyl acetate copolymer on the rheological behaviour of alumino-silicate/polyethylene wax suspensions
  69. Fabrication and analysis of in situ formed boride/Al composites by reactive spontaneous infiltration
  70. Fabrication and analysis of an in situ TiB2Al composite by reactive spontaneous infiltration
  71. Fabrication of an AlN particulate aluminium matrix composite by a melt stirring method