All Stories

  1. Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber–reinforced polypropylene composites
  2. Analysis on drilling of woven glass fibre reinforced aluminium sandwich laminates
  3. Optimization of squeeze cast process parameters on mechanical properties of Al2O3/SiC reinforced hybrid metal matrix composites using taguchi technique
  4. Mechanical Properties Evaluation of Unidirectional Glass Fibre Reinforced Aluminium Sandwich Laminate
  5. Influence of drilling process parameters on hybrid vinyl ester composite
  6. Influence of carbon nano tubes on mechanical, metallurgical and tribological behavior of magnesium nanocomposites
  7. Nanoclay Addition and Core Materials Effect on Impact and Damage Tolerance Capability of Glass Fiber Skin Sandwich Laminates
  8. Investigation on mechanical properties of woven alovera/sisal/kenaf fibres and their hybrid composites
  9. Dynamic Analysis of OMMT Nanoparticle Reinforced Polyester Resin GFR-PS Foam Sandwich Laminates
  10. Evaluation of Mechanical and Interfacial Properties of Sisal/Jute/Glass Hybrid Fiber Reinforced Polymer Composites
  11. Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels
  12. The Hybride dual matrix reinforcement and study sintered MWCNT&B4c with AL
  13. Influence of fiber orientation and fiber content on properties of sisal-jute-glass fiber-reinforced polyester composites
  14. Mechanical Properties Evaluation of the Carbon Fibre Reinforced Aluminium Sandwich Composites
  15. Experimental Investigation of Machining Parameters during Turning of AISI 316L Stainless Steel Using Nano Cutting Environment
  16. Synthesis and characterization of dual particle (MWCT+B4C) reinforced sintered hybrid aluminum matrix composites
  17. Comparison of the Wear Properties of Polymer Composites Having CNT With and Without Glass Fiber Reinforcement
  18. Study of sandwich effect on nanoclay modified polyester resin GFR face sheet laminates
  19. Tensile Property of Glass Fiber Reinforced Plastic and Aluminium Stack
  20. Tensile Properties of Natural Fiber Reinforced Polymers: An Overview
  21. Tensile and Flexural Properties of Glass Fibre Reinforced Nano Polymer Composite Panels
  22. Synthesis and Characterization of Multi Wall Carbon Nanotube (MWCNT) Filled Hybrid Banana-Glass Fiber Reinforced Composites
  23. Sensitivity Analysis of Friction Welding Process Parameters on Tensile Properties of ASS304L Alloy
  24. Roundness Error Evaluation in Drilling of Glass Fiber Reinforced Polypropylene (GFR/PP) Composites Using Box Behnken Design (BBD)
  25. Processing and Mechanical Property Evaluation of Kenaf-Glass Fiber Reinforced Polymer Composites
  26. Processing and Mechanical Property Evaluation of Flax-Glass Fiber Reinforced Polymer Composites
  27. Predicting the Best Tensile Strength of Banana-Bamboo-Glass Fiber Reinforced Natural Fiber Composites Using Taguchi Method
  28. Predicting the Best Flexural Strength of Banana-Bamboo-Glass Fiber Reinforced Natural Fiber Composites Using Taguchi Method
  29. Modeling of Surface Roughness in Drilling of MDF Panels
  30. Modeling and Analysis of Cutting Force in Turning of AISI 316L Stainless Steel (SS) under Nano Cutting Environment
  31. Mechanical Characteristics of Woven Banana and Glass Fiber Epoxy Composites
  32. Mechanical & Thermal Properties of Sisal Epoxy/Banana Epoxy Composites - A Review
  33. Material Characteristics of Fabricated Resin Carbon Nanotube Reinforced and Resin Glass Fiber Carbon Nanotube Reinforced Composites
  34. Influence of Process Parameter on Microstructural Characteristics and Tensile Properties of Friction Welded ASS304L Alloy
  35. Hard Turning of AISI D2 Steel by Polycrystalline Cubic Boron Nitride (PCBN)
  36. Fuzzy Modeling of Surface Roughness Parameters in Machining Ti-6Al-4V Alloy
  37. Flexural and Impact Properties of 2D and 3D Jute/GF/Epoxy Hybrid Composite Materials
  38. Effect of Volume Fraction on Surface Roughness in Turning of Hybrid Metal Matrix (A6061 A1+SiC+Graphite) Composites
  39. Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Hybrid Composites – A Review
  40. Developing the Empirical Relationship to Predict the Minimum Microhardness of AISI 1020 Grade Low Carbon Steel Joints
  41. Cutting Force Analysis in Drilling of Al6061/Mica Particulate Composite
  42. aluminium metal matrix composites
  43. Properties of AMMC before and after heat treatment
  44. Synthesis and Characterization of Multi Wall Carbon Nanotubes (MWCNT) Reinforced Sintered Magnesium Matrix Composites
  45. Influence of Cutting Parameters in Machining of Titanium Alloy
  46. Analysis of friction welding parameters on the mechanical metallurgical and chemical properties of AISI 1035 steel joints
  47. Thrust Force Analysis in Drilling Glass Fiber Reinforced/Polypropylene (GFR/PP) Composites
  48. Surface Roughness Optimization in Machining of Titanium Alloy (Ti-6Al-4V)
  49. Tensile Property Evaluation of Carbon Fiber Reinforced Aluminium Sandwich Composites
  50. Worn Surface Analysis of Hybrid Metal Matrix Composite
  51. Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods
  52. The Microhardness Analysis of Friction Welded AISI 52100 Grade Carbon Steel Joints
  53. Influence of Process Parameters on Delamination of Drilling of (GF/PC) Glass Fiber Reinforced Polycarbonate Matrix Composites
  54. Experimental Investigation and Analysis on Hard Turning of AISI D2 Steel Using Coated Carbide Insert
  55. Effect of Hardness on the Wear Behavior of Hybrid Metal Matrix Composites
  56. Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods
  57. Experimental investigation and analysis of thrust force in drilling cast hybrid metal matrix (Al–15%SiC–4%graphite) composites
  58. Analysis of AISI 1035 Grade Joints Welded Frictionally with Varying Forging Pressure
  59. Developing Empirical Relationships to Predict Tensile Properties of Friction Welded AISI 52100 Grade Steel Rods
  60. Impact Behaviour Analysis of Sisal/Jute and Glass Fiber Reinforced Hybrid Composites
  61. Analysis on influence of machining parameters on thrust force in drilling GFRP-armor steel sandwich composites
  62. Synthesis and characterization of sintered hybrid aluminium matrix composites reinforced with nanocopper oxide particles and microsilicon carbide particles
  63. Effect of nanomodified polyester resin on hybrid sandwich laminates
  64. Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design
  65. Surface Roughness Analysis in Turning of Titanium Alloy by Nanocoated Carbide Insert
  66. Influence of Tool Materials on Thrust Force and Delamination in Drilling Sisal-glass Fiber Reinforced Polymer (S-GFRP) Composites
  67. Influence of Thrust Force in Drilling of Glass Fiber Reinforced Polycarbonate (GFR/PC) Thermoplastic Matrix Composites Using Box-behnken Design
  68. Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels
  69. Dry Sliding Wear Behaviour of AA6061-T6 Reinforced SiC and Al2O3 Particulate Hybrid Composites
  70. Experimental Investigation and Surface roughness Analysis on Hard turning of AISI D2 Steel using Coated Carbide Insert
  71. Fuzzy rule-based modeling of machining parameters for surface roughness in turning carbon particle-reinforced polyamide
  72. Mechanical Properties of AISI 316L Austenitic Stainless Steels Welded by GTAW
  73. Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites
  74. Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite
  75. Evaluation of mechanical and wear properties of hybrid aluminium matrix composites
  76. Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites
  77. Synthesis and characterization of nano filled carbon fiber reinforced composites
  78. Application of Artificial Neural Network for the Prediction of Surface Roughness in Drilling GFRP Composites
  79. Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites
  80. Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition
  81. Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites
  82. Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites
  83. Measurement and analysis of thrust force in drilling of particle board (PB) composite panels
  84. Analysis of delamination in drilling glass fiber reinforced polyester composites
  85. Investigation on the Turning Parameters for Surface Roughness using Taguchi Analysis
  86. Electrical discharge machining: study on machining characteristics of WC/Co composites
  87. Simulation Analysis of Combustion Parameters and Emission Characteristics of CNG Fueled HCCI Engine
  88. Influence of Machining Parameters on Delamination in Drilling of GFRP-armour Steel Sandwich Composites
  89. Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites
  90. Influence of Nano Particle on Flexural and Impact Properties of Sandwich Structures
  91. Delamination in Drilling of GFR/High Impact Polystyrene Omposites
  92. Thrust Force Studies in Drilling of Medium Density Fiberboard Panels
  93. Influence of Machining Parameters on Diameter Error in Drilling of GFRP – Armour Steel Sandwich Composites
  94. Influence of Cutting Parameters on Torque in Drilling of Al-15%SiC-4% Graphite Metal Matrix Composites
  95. Experimental Studies on Surface Roughness in Drilling MDF Composite Panels using Taguchi and Regression Analysis Method
  96. Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites
  97. Effect of Electrical Discharge Machining on strength and reliability of WC–30%Co composite
  98. Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)
  99. Optimization of machining parameters in drilling hybrid aluminium metal matrix composites
  100. Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics
  101. Modeling and analysis of performances in drilling hybrid metal matrix composites using D-optimal design
  102. Optimization of Machining Parameters for Surface Roughness and Burr Height in Drilling Hybrid Composites
  103. Analysis on Drilling of Glass Fiber–Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis
  104. Analyzing surface quality in machined composites
  105. Turning CFRP Composites with Ceramic tool for Surface Roughness Analysis
  106. Thrust force evaluation in drilling medium density fibre (MDF) panels using design of experiments
  107. Surface Roughness Evaluation in Drilling Hybrid Metal Matrix Composites
  108. Optimizing the Machining Parameters for Minimum Burr Height in Drilling of Hybrid Composites
  109. Optimization of Machining Parameters in Electrical Discharge Machining (EDM) of 304 Stainless Steel
  110. Modelling and Analysis of Thrust Force in Drilling of GFRP Composites Using Response Surface Methodology (RSM)
  111. Modeling of Thrust Force in Drilling of Plain Medium Density Fiberboard (MDF) Composite Panels Using RSM
  112. Experimental investigation and optimisation in drilling of GFRP composites
  113. Experimental studies on machining characteristics of hybrid aluminium metal matrix composite and carbon nano tubes added hybrid aluminium metal matrix composite
  114. Experimental investigation and analysis in turning of CFRP composites
  115. Modeling and analysis of roundness error in friction drilling of aluminum silicon carbide metal matrix composite
  116. Optimization of machining parameters for multi-performance characteristics in drilling hybrid metal matrix composites
  117. Modeling and analysis of surface roughness on machining of Nimonic C-263 alloy by PVD coated carbide insert
  118. Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills
  119. Assessment of Factors Influencing Tool Wear on the Machining of Nimonic C-263 Alloy with PVD Coated Carbide Inserts
  120. MODELING AND OPTIMIZATION OF PROCESS PARAMETERS FOR DELAMINATION IN DRILLING GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITES
  121. Flow stress modeling of AZ91 magnesium alloys at elevated temperature
  122. Influence of drill geometry on thrust force in drilling GFRP composites
  123. Application of fuzzy logic for modeling surface roughness in turning CFRP composites using CBN tool
  124. Surface roughness analysis on machining of nimonic C-263 alloy using ANN and RSM techniques
  125. Experimental investigation on roundness error in friction drilling and mechanical properties of Al/SiCp-MMC composites
  126. Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al<sub>2</sub>O<sub>3</sub>)
  127. Modeling for prediction of surface roughness in drilling MDF panels using response surface methodology
  128. Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites
  129. A mathematical model to predict thrust force in drilling hybrid metal matrix composites
  130. Characteristics of re-inforced Carbon-Carbon
  131. Prediction of surface roughness parameters in drilling of MDF composite panel using Box-Behnken experimental design (BBD)
  132. Modeling of thrust force in drilling of CFRP composites using adaptive neuro fuzzy inference system
  133. Influence of silicon carbide particulate reinforcement on the Fracture toughness of Al 6061 alloy composites produced by stir casting method
  134. Influence of machining parameters on surface roughness and material removal rate in machining carbon fiber reinforced polymer material
  135. Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool
  136. Studies on Mechanical Characterization of Polypropylene/Na<sup>+</sup>-MMT Nanocomposites
  137. Experimental Investigation and Analysis on Delamination in Drilling of Wood Composite Medium Density Fiber Boards
  138. Delamination Analysis in Drilling of CFRP Composites Using Response Surface Methodology
  139. Prediction of the flow stress of 6061 Al–15% SiC – MMC composites using adaptive network based fuzzy inference system
  140. Multiple performance optimization in machining of GFRP composites by a PCD tool using non-dominated sorting genetic algorithm (NSGA-II)
  141. Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach
  142. Experimental study on machining of titanium alloy (Ti64) by CVD and PVD coated carbide inserts
  143. Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools
  144. Application of goal programming technique for Electro Discharge Machining (EDM) characteristics of cemented carbide (WC/Co)
  145. SURFACE ROUGHNESS PARAMETERS OPTIMIZATION IN MACHINING A356/SiC/20pMETAL MATRIX COMPOSITES BY PCD TOOL USING RESPONSE SURFACE METHODOLOGY AND DESIRABILITY FUNCTION
  146. Evaluation of Delamination in Drilling GFRP Composites
  147. Influence of Drill Point Angle in High Speed Drilling of Glass Fiber Reinforced Plastics
  148. Analysis of surface roughness parameters in turning of FRP tubes by PCD tool
  149. Wear Mechanism of Glass Fiber Reinforced Epoxy Composites Under Dry Sliding Using Fuzzy Clustering Technique
  150. Influence of process parameters on electric discharge machining of WC/30%Co composites
  151. Surface Roughness Model for Machining Glass Fiber Reinforced Plastics by PCD Tool using Fuzzy Logics
  152. Statistical Analysis of Delamination in Drilling Glass Fiber-Reinforced Plastics (GFRP)
  153. Surface Roughness Parameters Evaluation in Machining GFRP Composites by PCD Tool using Digital Image Processing
  154. Fuzzy Modeling and Analysis of Machining Parameters in Machining Titanium Alloy
  155. Chatter Suppression in Boring Operation Using Magnetorheological Fluid Damper
  156. Modeling of Machining Parameters to Predict Surface Roughness in Machining Al/SiC Particulate Composites by Carbide Insert
  157. Modeling and Analysis of Cutting Force in Turning of GFRP Composites by CBN Tools
  158. Surface Roughness Analysis in Machining of Titanium Alloy
  159. Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool
  160. Application of Probablistic Neural Network for the Development of Wear Mechanism Map for Glass Fiber Reinforced Plastics
  161. Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)
  162. Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites
  163. Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology
  164. Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites
  165. Optimization of machining parameters in turning GFRP composites using a carbide (K10) tool based on the taguchi method with fuzzy logics
  166. OPTIMAL MACHINING CONDITIONS FOR TURNING OF PARTICULATE METAL MATRIX COMPOSITES USING TAGUCHI AND RESPONSE SURFACE METHODOLOGIES
  167. Multiple Performance Optimization of Machining Parameters on the Machining of GFRP Composites Using Carbide (K10) Tool
  168. Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling
  169. Cutting Parameters Optimization for Surface Roughness in Machining of GFRP Composites using Taguchi’s Method
  170. Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites
  171. Mathematical Model to Predict the Surface Roughness on the Machining of Glass Fiber Reinforced Polymer Composites
  172. Optimal Machining Parameters for Achieving Minimal Tool Wear in Turning Of GFRP Composites
  173. 8 Application of response surface method and desirability function for the optimization of machining parameters of hybrid metal matrix (Al/SiC/Al2O3) composites
  174. 6. Drilling of high impact polystyrene composites materials
  175. Application of Taguchi Method with Grey Fuzzy Logic for the Optimization of Machining Parameters in Machining Composites