Current affiliation: University of MalayaSubject: Engineering & TechnologyPrimary location: Malaysia
Published in:CLEAN - Soil Air WaterPublication date:2014-07-28
Preventing Nutrients Build-up Using Water Hyacinth and Water Lettuce
Published in:MeasurementPublication date:2013-11-01
In this study, the application of DLV method on damage detection of 3D frame structure was conducted. Some factors like the number of measured DOFs...
Published in:MeasurementPublication date:2012-06-01
The objective of the study was to propose a technique to determine the location and severity of honeycomb damage in a reinforced concrete beam usin...
Published in:Topics in Modal Analysis II, Volume 6Publication date:2012-01-01
Published in:MeasurementPublication date:2012-07-01
The objective of the study was to propose an effective, simple and reliable technique to determine the location of triple-crack damage in a simply-...
Published in:Safety SciencePublication date:2012-03-01
The objective of the study was to determine the influential safety factors that governed the success of a safety management system for construction...
Published in:International Journal of the Physical SciencesPublication date:2011-12-23
Published in:Safety SciencePublication date:2013-01-01
An analysis of accident cycle in sea transportation of petroleum over the last 44 years.
Published in:MeasurementPublication date:2011-12-01
A new method, namely Impact-Synchronous Modal Analysis (ISMA) utilising the modal extraction techniques commonly used in EMA but performed in the p...
Published in:Scientific Research and EssaysPublication date:2011-12-30
Published in:CLEAN - Soil Air WaterPublication date:2012-10-26
This study examined the factors related to the steps taken to clean-up and rehabilitate Melaka River and deduce by utilizing factor analysis the mo...
Published in:MeasurementPublication date:2014-04-01
Published in:MeasurementPublication date:2013-04-01
Determination of material properties of orthotropic plates with general elastic boundary supports using the Inverse method is presented..
Published in:MeasurementPublication date:2013-12-01
Published in:New Trends and Developments in Automotive IndustryPublication date:2011-01-08
Published in:Proceedings of the 18th Southeast Asian Geotechnical Conference (18SEAGC) & Inaugural AGSSEA Conference (1AGSSEA)Publication date:2013-01-01
Published in:Advanced Materials ResearchPublication date:2011-05-01
Published in:MeasurementPublication date:2013-02-01
Time-lapse electrical resistivity tomography (TLERT) was used to determine the freshwater-lens morphology in local scale at Carey Island, Selangor,...
Published in:Applied Mechanics and MaterialsPublication date:2013-12-01
Published in:IEEE Sensors JournalPublication date:2013-09-01
Published in:MeasurementPublication date:2014-09-01
Published in:MeasurementPublication date:2014-05-01
Examining the causes of off-shore drilling accidents and measures to reduce them
Published in:MeasurementPublication date:2014-01-01
Published in:MeasurementPublication date:2011-01-01
Modal analysis was performed to study the effect dynamic characteristics of rotor dynamic systems, namely natural frequencies, damping and mode sha...
Published in:Structural Health Monitoring, Volume 5Publication date:2014-01-01
Published in:Computer-Aided Civil and Infrastructure EngineeringPublication date:2013-06-03
Geometrical optimization of biconical tapered fiber sensors
In this article, a geometrical optimization procedure using biconical tapered fiber sensors is proposed for monitoring the early-age curing tempera...
Published in:CLEAN - Soil Air WaterPublication date:2013-06-17
Relative Adequacy of Landfills for Solid Waste Disposal
The relative adequacy of active landfills between states in Malaysia was studied by examining the percentages of closed landfills and the accessib...
This paper discussed the heavy metal pollution levels and the clean-up activities to improve the Gombak and Penchala River water quality in Kuala L...
Published in:JOURNAL OF MECHANICAL ENGINEERING AND SCIENCESPublication date:2014-06-30
Published in:Applied Mechanics and MaterialsPublication date:2014-10-01
This study examined the environmental performance and economic efficiency of global operations of selected companies in the petroleum industry by a...
Published in:MeasurementPublication date:2015-01-01
Designing more comfortable furniture and appliances
Published in:Journal of Bridge EngineeringPublication date:2012-11-01
The study proposed a technique to reduce the limitations of modal identification in damage detection using reduced field data for nondestructive st...
Published in:Archives of Civil EngineeringPublication date:2012-01-01
Published in:Engineering StructuresPublication date:2006-09-01
This paper describes the determination of the location of damage due to single cracks and due to honeycombs in RC beams using mode shape derivative...
Published in:Archives of Civil and Mechanical EngineeringPublication date:2011-01-01
A new index for detecting the damage severity in structural elements by combining modal parameters is proposed. The index is based on the combined ...
Published in:Experimental TechniquesPublication date:2012-04-04
A practical method to nondestructively locate and estimate the severity of a crack in terms of its damage index by measuring the changes in natural...
Published in:Experimental Heat TransferPublication date:2013-11-05
Published in:Wärme- und StoffübertragungPublication date:2013-01-31
Published in:Wärme- und StoffübertragungPublication date:2012-01-31
Published in:Applied Thermal EngineeringPublication date:2012-06-01
Published in:Journal of Food EngineeringPublication date:2012-01-01
Published in:Advances in AgriculturePublication date:2014-01-01
Published in:The Scientific World JOURNALPublication date:2014-01-01
Published in:International Journal of Impact EngineeringPublication date:2014-01-01
A methodology utilising Operating Deflection Shape (ODS) analysis, Frequency Response Function (FRF) measurement and pseudo-inverse method to evalu...
Published in:Materials Research InnovationsPublication date:2014-12-05
Published in:Energy ProcediaPublication date:2014-01-01
Published in:Journal of Earthquake and TsunamiPublication date:2015-09-01
Published in:Journal of Water and Land DevelopmentPublication date:2015-01-01
Published in:MeccanicaPublication date:2015-06-25
Published in:Journal of Earthquake and TsunamiPublication date:2015-06-01
Published in:SensorsPublication date:2015-09-09
Published in:Advances in Structural EngineeringPublication date:2015-11-01
This paper aims to identify damage locations as well as quantification of damage extent utilizing a vibration-based method. Damage indices called s...
Published in:Water Air & Soil PollutionPublication date:2008-09-28
An overview of heavy metal removal from industrial effluents with emphasis on biological methods is given