All Stories

  1. Recyclable deep eutectic solvent for the production of cationic nanocellulose s

    Article • Carbohydrate Polymers, November 2018, Elsevier

    Dr Juho Antti Sirviö

  2. Effect of plasticizers on the mechanical and thermomechanical properties of cellulose-based biocomposite films

    Article • Industrial Crops and Products, October 2018, Elsevier

    Dr Juho Antti Sirviö

  3. Sonication-assisted surface modification method to expedite the water removal from cellulose nanofibers for use in nanopapers and paper making

    Article • Carbohydrate Polymers, October 2018, Elsevier

    Dr Juho Antti Sirviö

  4. A fast method to prepare mechanically strong and water resistant lignocellulosic nanopapers

    Article • Carbohydrate Polymers, September 2018, Elsevier

    Dr Juho Antti Sirviö

  5. Stereoselectively water resistant hybrid nanopapers prepared by cellulose nanofibers and water-based polyurethane

    Article • Carbohydrate Polymers, July 2018, Elsevier

    Dr Juho Antti Sirviö

  6. Cationization of lignocellulosic fibers with betaine in deep eutectic solvent: facile route to charge stabilized cellulose and wood nanofibers

    Article • Carbohydrate Polymers, June 2018, Elsevier

    Dr Juho Antti Sirviö

  7. UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol

    Article • Macromolecules, February 2018, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  8. Carboxymethyl Chitosan and Its Hydrophobically Modified Derivative as pH-Switchable Emulsifiers

    Article • Langmuir, February 2018, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  9. Sodium salt of oleoyl carboxymethyl chitosan: A sustainable adsorbent in the oil spill treatment

    Article • Journal of Cleaner Production, January 2018, Elsevier

    Dr Juho Antti Sirviö

  10. Rapid preparation of all-cellulose composites by solvent welding based on the use of aqueous solvent

    Article • European Polymer Journal, December 2017, Elsevier

    Dr Juho Antti Sirviö

  11. Water resistant nanopapers prepared by lactic acid modified cellulose nanofibers

    Article • Cellulose, November 2017, Springer Science + Business Media

    Dr Juho Antti Sirviö

  12. Nanofibrillation of deep eutectic solvent-treated paper and board cellulose pulps

    Article • Carbohydrate Polymers, August 2017, Elsevier

    Dr Juho Antti Sirviö

  13. Mechanical fabrication of high-strength and redispersible wood nanofibers from unbleached groundwood pulp

    Article • Cellulose, July 2017, Springer Science + Business Media

    Dr Juho Antti Sirviö

  14. Effectiveness of N,O-carboxymethyl chitosan on destabilization of Marine Diesel, Diesel and Marine-2T oil for oil spill treatment

    Article • Carbohydrate Polymers, July 2017, Elsevier

    Dr Juho Antti Sirviö

  15. The pH sensitive properties of carboxymethyl chitosan nanoparticles cross-linked with calcium ions

    Article • Colloids and Surfaces B Biointerfaces, May 2017, Elsevier

    Dr Juho Antti Sirviö

  16. Castor oil-based biopolyurethane reinforced with wood microfibers derived from mechanical pulp

    Article • Cellulose, April 2017, Springer Science + Business Media

    Dr Juho Antti Sirviö

  17. Sustainable stabilization of oil in water emulsions by cellulose nanocrystals synthesized from deep eutectic solvents

    Article • Cellulose, February 2017, Springer Science + Business Media

    Dr Juho Antti Sirviö

  18. Cationic nanocelluloses in dewatering of municipal activated sludge

    Article • Journal of Environmental Chemical Engineering, February 2017, Elsevier

    Dr Juho Antti Sirviö

  19. Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments

    Article • ACS Applied Materials & Interfaces, January 2017, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  20. Anionic wood nanofibers produced from unbleached mechanical pulp by highly efficient chemical modification

    Article • Journal of Materials Chemistry A, January 2017, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  21. Soluble cellulose by mild chemical modification

    Article • ChemSusChem, December 2016, Wiley

    Dr Juho Antti Sirviö

  22. Anionically Stabilized Cellulose Nanofibrils through Succinylation Pretreatment in Urea-Lithium Chloride Deep Eutectic Solvent

    Article • ChemSusChem, October 2016, Wiley

    Dr Juho Antti Sirviö

  23. Novel and sustainable fabrication of nanosized cellulose

    Article • Biomacromolecules, August 2016, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  24. Mineral flotation with nanocellulose

    Article • Chemical Engineering Science, April 2016, Elsevier

    Dr Juho Antti Sirviö

  25. Nanoparticle emulsifiers based on bifunctionalized cellulose nanocrystals as marine diesel oil–water emulsion stabilizers

    Article • Chemical Engineering Journal, March 2016, Elsevier

    Dr Juho Antti Sirviö

  26. Environmental friendly and sustainable gas barrier on porous materials: Nanocellulose coatings prepared using spin- and dip-coating

    Article • Materials & Design, March 2016, Elsevier

    Dr Juho Antti Sirviö

  27. Weighing the factors behind enzymatic hydrolyzability of pretreated lignocellulose

    Article • Green Chemistry, January 2016, Royal Society of Chemistry

    Dr Juho Antti Sirviö, Dr Ville Juhani Pihlajaniemi

  28. Amino-modified cellulose nanocrystals with adjustable hydrophobicity from combined regioselective oxidation and reductive amination

    Article • Carbohydrate Polymers, January 2016, Elsevier

    Dr Juho Antti Sirviö

  29. Interactions between aminated cellulose nanocrystals and quartz: Adsorption and wettability studies

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, January 2016, Elsevier

    Dr Juho Antti Sirviö

  30. Nanocellulose with UV-absorbing and reinforcement properties

    Article • Journal of Materials Chemistry A, January 2016, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  31. Water purification with crosslinked chitosan

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  32. Water purification with nanocellulose

    Article • Cellulose, November 2015, Springer Science + Business Media

    Dr Juho Antti Sirviö

  33. Phosphonated nanocelluloses from sequential oxidative–reductive treatment—Physicochemical characteristics and thermal properties

    Article • Carbohydrate Polymers, November 2015, Elsevier

    Dr Juho Antti Sirviö

  34. A cross-linked 2,3-dicarboxylic acid cellulose nanofibril network: A nanoporous thin-film layer with tailored pore size for composite membranes

    Article • Separation and Purification Technology, November 2015, Elsevier

    Dr Juho Antti Sirviö

  35. Use of aldehyde-functionalized nanocellulose

    Article • ACS Applied Materials & Interfaces, August 2015, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  36. High-consistency milling of oxidized cellulose for preparing microfibrillated cellulose films

    Article • Cellulose, July 2015, Springer Science + Business Media

    Dr Juho Antti Sirviö

  37. Butylamino-functionalized cellulose nanocrystal films: barrier properties and mechanical strength

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  38. Simple and non-derivatizing pre-treatment method for nanocellulose production

    Article • Green Chemistry, January 2015, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  39. Use of Chemically Modified Nanocelluloses in Flotation of Hematite and Quartz

    Article • Industrial & Engineering Chemistry Research, December 2014, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  40. Optimization of dicarboxylic acid cellulose synthesis: Reaction stoichiometry and role of hypochlorite scavengers

    Article • Carbohydrate Polymers, December 2014, Elsevier

    Dr Juho Antti Sirviö

  41. Strong, Self-Standing Oxygen Barrier Films from Nanocelluloses Modified with Regioselective Oxidative Treatments

    Article • ACS Applied Materials & Interfaces, August 2014, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  42. Cationic wood cellulose films with high strength and bacterial anti-adhesive properties

    Article • Cellulose, July 2014, Springer Science + Business Media

    Dr Juho Antti Sirviö

  43. Amphiphilic Cellulose Nanocrystals from Acid-Free Oxidative Treatment: Physicochemical Characteristics and Use as an Oil–Water Stabilizer

    Article • Biomacromolecules, June 2014, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  44. Biocomposite cellulose-alginate films: Promising packaging materials

    Article • Food Chemistry, May 2014, Elsevier

    Dr Juho Antti Sirviö

  45. Fabrication of cationic cellulosic nanofibrils through aqueous quaternization pretreatment and their use in colloid aggregation

    Article • Carbohydrate Polymers, March 2014, Elsevier

    Dr Juho Antti Sirviö

  46. Porous thin film barrier layers from 2,3-dicarboxylic acid cellulose nanofibrils for membrane structures

    Article • Carbohydrate Polymers, February 2014, Elsevier

    Dr Juho Antti Sirviö

  47. Regeneration and Recycling of Aqueous Periodate Solution in Dialdehyde Cellulose Production

    Article • Journal of Wood Chemistry and Technology, December 2013, Taylor & Francis

    Dr Juho Antti Sirviö

  48. High-Strength Nanocellulose–Talc Hybrid Barrier Films

    Article • ACS Applied Materials & Interfaces, November 2013, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  49. Sulfonated cellulose nanofibrils obtained from wood pulp through regioselective oxidative bisulfite pre-treatment

    Article • Cellulose, January 2013, Springer Science + Business Media

    Dr Juho Antti Sirviö

  50. Sustainable packaging materials based on wood cellulose

    Article • RSC Advances, January 2013, Royal Society of Chemistry

    Dr Juho Antti Sirviö

  51. Use of nanoparticular and soluble anionic celluloses in coagulation-flocculation treatment of kaolin suspension

    Article • Water Research, May 2012, Elsevier

    Dr Juho Antti Sirviö

  52. Enhancement of the Nanofibrillation of Wood Cellulose through Sequential Periodate–Chlorite Oxidation

    Article • Biomacromolecules, April 2012, American Chemical Society (ACS)

    Dr Juho Antti Sirviö

  53. Flocculation performance of a cationic biopolymer derived from a cellulosic source in mild aqueous solution

    Article • Bioresource Technology, October 2011, Elsevier

    Dr Juho Antti Sirviö

  54. Synthesis of highly cationic water-soluble cellulose derivative and its potential as novel biopolymeric flocculation agent

    Article • Carbohydrate Polymers, August 2011, Elsevier

    Dr Juho Antti Sirviö

  55. Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation

    Article • Carbohydrate Polymers, August 2011, Elsevier

    Dr Juho Antti Sirviö

  56. Characterization of highly accessible cellulose microfibers generated by wet stirred media milling

    Article • Carbohydrate Polymers, February 2011, Elsevier

    Dr Juho Antti Sirviö

  57. Study of the ways to improve the periodate oxidation of cellulose

    Article • Carbohydrate Polymers, January 2011, Elsevier

    Dr Juho Antti Sirviö