All Stories

  1. Photocatalytic oxidation technology for indoor environment air purification: The state-of-the-art
  2. Removal of pharmaceuticals from water by homo/heterogonous Fenton-type processes-A review
  3. Optimization approaches in district heating and cooling thermal network
  4. Mechanochemical Synthesis of CPM-5: A Green Method
  5. Modeling and analysis of renewable heat integration into non-domestic buildings - The case of biomass boilers: A whole life asset-supply chain management approach
  6. A new multiple regression model for predictions of urban water use
  7. Removal of pharmaceuticals and endocrine disrupting compounds from water by zinc oxide-based photocatalytic degradation: A review
  8. A Review of District Heating Systems: Modeling and Optimization
  9. Impact of design parameters on the performance of non-thermal plasma air purification system
  10. Exergy analysis of single effect absorption refrigeration systems: The heat exchange aspect
  11. A Comparative Study on Metal Organic Frameworks for Indoor Environment Application: Adsorption Evaluation
  12. Integration of storage and renewable energy into district heating systems: A review of modelling and optimization
  13. An efficient multi-layer model for pier scour computations
  14. Advances and challenges in building engineering and data mining applications for energy-efficient communities
  15. Wastewater Treatment and Reclamation: A Review of Pulp and Paper Industry Practices and Opportunities
  16. Thermal Energy Storage for Building Load Management: Application to Electrically Heated Floor
  17. Deactivation and ultraviolet C-induced regeneration of photocatalytic oxidation air filters
  18. Urban neighborhood characteristics influence on a building indoor environment
  19. Expanding Heisler chart to characterize heat transfer phenomena in a building envelope integrated with phase change materials
  20. Integration of PCM in domestic hot water tanks: Optimization for shifting peak demand
  21. Heat and cold storage using phase change materials in domestic refrigeration systems: The state-of-the-art review
  22. Editorial – IEA-ECES Annex 31 Special Issue on Thermal Energy Storage
  23. Investigating the Effect of Control Strategy on the Shift of Energy Consumption in a Building Integrated with PCM Wallboard
  24. Control strategies for integration of thermal energy storage into buildings: State-of-the-art review
  25. Photocatalytic air cleaners and materials technologies – Abilities and limitations
  26. Evaluation of nano-titanium dioxide (TiO2) catalysts for ultraviolet photocatalytic oxidation air cleaning devices
  27. Wastewater treatment in the pulp-and-paper industry: A review of treatment processes and the associated greenhouse gas emission
  28. Competitive Adsorption Behaviour of Binary Mixtures on Titanium Dioxide
  29. A Comparative Study of Leakage Characteristics between an Under Floor Air Distribution System and an Over Head Air Distribution System
  30. Particle Loading Time and Humidity Effects on the Efficiency of an N95 Filtering Facepiece Respirator Model under Constant and Inhalation Cyclic Flows
  31. Seasonal thermal energy storage with heat pumps and low temperatures in building projects—A comparative review
  32. Evaluation of ultraviolet–photocatalytic oxidation of light alcohols at sub-parts per million concentrations
  33. Using physical–chemical properties of reactants to estimate the performance of photocatalytic oxidation air cleaners
  34. Modeling of gas-phase filter model for high- and low-challenge gas concentrations
  35. A bridge pier scour model with non-uniform sediments
  36. Numerical analysis of a thermally enhanced domestic hot water tank
  37. Phase change materials in hot water tank for shifting peak power demand
  38. Evaluation of Gas-Phase Filter Performance for a Gas Mixture
  39. Impact of phase change materials types and positioning on hot water tank thermal performance: Using measured water demand profile
  40. Indoor thermal condition in urban heat island: Comparison of the artificial neural network and regression methods prediction
  41. Efficient non-hydrostatic modelling of flow and bed shear stress in a pier scour hole
  42. Gas-phase filters breakthrough models at low concentration – Effect of relative humidity
  43. Plasma-Based Indoor Air Cleaning Technologies: The State of the Art-Review
  44. Development and systematic validation of an adsorption filter model
  45. Designing building envelope with PCM wallboards: Design tool development
  46. Thermal energy storage with phase change material—A state-of-the art review
  47. Photocatalytic oxidation air cleaner: Identification and quantification of by-products
  48. Evaluation of N95 Filtering Facepiece Respirator Efficiency with Cyclic and Constant Flows
  49. Assessing long-term performance of centralized thermal energy storage system
  50. Contribution of Breathing Frequency and Inhalation Flow Rate on Performance of N95 Filtering Facepiece Respirators
  51. Predicting gas-phase air-cleaning system efficiency at low concentration using high concentration results: Development of a framework
  52. Performance of ultraviolet photocatalytic oxidation for indoor air applications: Systematic experimental evaluation
  53. Centralized latent heat thermal energy storage system: Model development and validation
  54. Experimental performance evaluation and comparative analyses of heat pipe and direct flow augmented solar collectors
  55. Greenhouse gas emission by wastewater treatment plants of the pulp and paper industry – Modeling and simulation
  56. Greenhouse Gas Emission and Energy Consumption in Wastewater Treatment Plants: Impact of Operating Parameters
  57. Impact of design parameters on the performance of ultraviolet photocatalytic oxidation air cleaner
  58. Ultraviolet photocatalytic oxidation for indoor environment applications: Experimental validation of the model
  59. Extracting knowledge from building-related data — A data mining framework
  60. Reductions in greenhouse gas (GHG) generation and energy consumption in wastewater treatment plants
  61. Adsorption performance of titanium dioxide (TiO2) coated air filters for volatile organic compounds
  62. Quantification of uncertainty in predicting building energy consumption: A stochastic approach
  63. Application of dynamic models to estimate greenhouse gas emission by wastewater treatment plants of the pulp and paper industry
  64. Indoor thermal condition in urban heat Island – Development of a predictive tool
  65. Contaminant transport through the garage – House interface leakage
  66. Modeling of phase change materials for applications in whole building simulation
  67. Contaminant source identification within a building: Toward design of immune buildings
  68. Impact of two particle measurement techniques on the determination of N95 class respirator filtration performance against ultrafine particles
  69. A novel methodology for knowledge discovery through mining associations between building operational data
  70. A procedure to quantify the impact of mitigation techniques on the urban ventilation
  71. Modeling and validation of a photocatalytic oxidation reactor for indoor environment applications
  72. A methodology for identifying and improving occupant behavior in residential buildings
  73. Airflow and heat transfer in double skin facades
  74. Measuring chemical emissions from wet products—Development of a new measurement technique
  75. A systematic procedure to study the influence of occupant behavior on building energy consumption
  76. Impact of non-uniform urban surface temperature on pollution dispersion in urban areas
  77. Effect of Process Parameters on Greenhouse Gas Generation by Wastewater Treatment Plants
  78. Pollution removal effectiveness of the pedestrian ventilation system
  79. Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications
  80. Approaches to study Urban Heat Island – Abilities and limitations
  81. A decision tree method for building energy demand modeling
  82. Energy performance assessment of double-skin façade with thermal mass
  83. CFD Analysis of Turbulent Natural Ventilation in Double-Skin Façade: Thermal Mass and Energy Efficiency
  84. A novel approach to enhance outdoor air quality: Pedestrian ventilation system
  85. A software framework for model predictive control with GenOpt
  86. Development of Artificial Neural Network based heat convection algorithm for thermal simulation of large rectangular cross-sectional area Earth-to-Air Heat Exchangers
  87. Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network
  88. Estimation of greenhouse gas generation in wastewater treatment plants – Model development and application
  89. Airflow and Heat Transfer in Sustainable Building Components: Double-Skin Facades
  90. Assessing the performance of air cleaning devices – A full-scale test method
  91. Performance of Mechanical Filters and Respirators for Capturing Nanoparticles ―Limitations and Future Direction
  92. Convective heat transfer prediction in large rectangular cross-sectional area Earth-to-Air Heat Exchangers
  93. Simple model and control strategy of earth-to-air heat exchangers
  94. Impact of process design on greenhouse gas (GHG) generation by wastewater treatment plants
  95. An Experimental Study for Examining the Effects of Environmental Conditions on Diffusion Coefficient of VOCs in Building Materials
  96. Optimization of ventilation systems in office environment, Part II: Results and discussions
  97. Evaluation of Modeling and Measurement Techniques of Ultraviolet Germicidal Irradiation Effectiveness — Towards the Design of Immune Buildings
  98. Optimization of ventilation system design and operation in office environment, Part I: Methodology
  99. Estimation of Greenhouse Gas Emissions by the Wastewater Treatment Plant of a Locomotive Repair Factory in China
  100. Evaluation of various activated carbons for air cleaning – Towards design of immune and sustainable buildings
  101. Analysis and Design of a New Roof Monitor for Day and Night Illumination of a Large Volume Room
  102. Physically Based Modelling of the Material and Gaseous Contaminant Interactions in Buildings: Models, Experimental Data and Future Developments
  103. Modeling ventilated double skin façade—A zonal approach
  104. Physically Based Modelling of the Material and Gaseous Contaminant Interactions in Buildings: Models, Experimental Data and Future Developments
  105. Modeling the combined conduction—Air infiltration through diffusive building envelope
  106. Zonal Modeling for Simulating Indoor Environment of Buildings: Review, Recent Developments, and Applications
  107. Improving HVAC system performance: towards the design of sustainable and immune buildings
  108. Thermal Behaviour of the Diffusive Building Envelope: State-of-the-Art Review
  109. Evaluation of Building Materials Individually and in Combination Using Odour Threshold
  110. Conjugate Mass Transfer Modeling for VOC Source and Sink Behavior of Porous Building Materials: When to Apply It?
  111. Volatile organic compound (VOC) adsorption on material: influence of gas phase concentration, relative humidity and VOC type
  112. A study on VOC source and sink behavior in porous building materials - analytical model development and assessment
  113. A Learning Machine Approach for Predicting Thermal Comfort Indices
  114. Building materials VOC emissions—a systematic parametric study
  115. Integrated IAQ model for prediction of VOC emissions from building material
  116. The impact of VOC mixture, film thickness and substrate on adsorption/desorption characteristics of some building materials
  117. Correlation based models for the simulation of energy performance of screw chillers
  118. Impact of varying area of polluting surface materials on perceived air quality
  119. Moisture Transport Across Interfaces Between Autoclaved Aerated Concrete and Mortar
  120. Modelling of volatile organic compounds emission from dry building materials
  121. Modelling of volatile organic compounds emission from dry building materials
  122. Modelling of a Hybrid-Ventilated Building – Using ESP-r
  123. Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure
  124. Sorption Isotherms of Acetone on Various Building Materials
  125. Sorption Isotherms of Acetone on Various Building Materials
  126. Development and validation of a zonal model — POMA
  127. Identification of empirical transfer function coefficients for a hollow tile based on detailed models of coupled heat transfers
  128. A systematic approach to describe the air terminal device in CFD simulation for room air distribution analysis
  129. Modelling air infiltration due to wind fluctuations—a review
  130. Impact of psycho-social factors on perception of the indoor air environment studies in 12 office buildings
  131. Modelling of emission of volatile organic compounds from building materials—estimation of gas-phase mass transfer coefficient
  132. Graduate Education and Training in Indoor Air Science — A Canadian Approach
  133. Measurement of Thermal Comfort and Indoor Air Quality Aboard 43 Flights on Commercial Airlines
  134. Measurement of Thermal Comfort and Indoor Air Quality Aboard 43 Flights on Commercial Airlines
  135. Material emission rates: Literature review, and the impact of indoor air temperature and relative humidity
  136. Energy-Storing Wallboard: Flammability Tests
  137. Using plastic waste as thermal insulation for the slab-on-grade floor and basement of a building
  138. The impact of surface air movement on material emissions
  139. Ventilation Performance and Indoor Air Quality in Workstations under Different Supply Air Systems: A Numerical Approach
  140. A Comprehensive Validation of Two Airflow Models - COMIS and CONTAM
  141. The Influence of Office Furniture, Workstation Layouts, Diffuser Types and Location on Indoor Air Quality and Thermal Comfort Conditions at Workstations
  142. Airflow and Air Quality in a Large Enclosure
  143. The Impact of Ventilation Rate and Partition Layout on the VOC Emission Rate: Time-Dependent Contaminant Removal
  144. Conventional vs CO2 demand-controlled ventilation systems
  145. Ventilation Effectiveness in a Partitioned Office with Displacement Ventilation Determined by Computer Simulation
  146. Control and Regulation of Indoor Air Quality in Canada
  147. Windows and Environmental Satisfaction: A Survey Study of an Office Building
  148. Emissions of Indoor Pollutants from Building Materials—State of the Art Review
  149. A procedure for sensitivity analysis of airflow in multi-zone buildings
  150. Numerical study of double-diffusive natural convection in a square cavity
  151. Thermal Comfort Aspect of Three Different Heating Systems
  152. Relationship between Occupant Discomfort as Perceived and as Measured Objectively
  153. Thermal comfort and indoor air quality in a partitioned enclosure under mixed convection
  154. Air Movement in Buildings Using Computational Fluid Dynamics
  155. A CFD Analysis of Ventilation Effectiveness in a Partitioned Room
  156. Computer-aided building ventilation system design — a system-theoretic approach
  157. The influence of turbulent wind on air change rates—a modelling approach
  158. A procedure for calculating thermal response factors of multi-layer walls—State space method
  159. Influence of air infiltration on airflow in a ventilated isothermal two-zone enclosure
  160. PERFORMANCE MODELLING OF AN AIR HEATING SOLAR COLLECTOR
  161. A procedure for measurement of ventilation effectiveness in residential buildings
  162. Air infiltration and indoor air quality models—a review
  163. Comparison between time domain and frequency domain computer program for building energy analysis
  164. A systematic approach for derivation of transfer function coefficients of buildings from experimental data
  165. Numerical simulation of the performance of an air heating solar collector
  166. A predictive stochastic model for indoor air quality
  167. Improved control strategy for forced flow solar water heating systems
  168. Long-term storage of chilled water in cisterns in hot, arid regions
  169. Analytical and inter-program validation of a building thermal model
  170. Experimental Procedures for Determination of Dynamic Response Using System Identification Techniques
  171. Thermal behaviour of buildings under random conditions
  172. System-Theoretic Models for Building Thermal Analysis
  173. Thermal performance of adobe structures with domed roofs and moist internal surfaces
  174. SYSTEM-THEORETIC APPROACH OF STOCHASTIC MODELLING OF PASSIVE BUILDING THERMAL PERFORMANCE
  175. Weekly storage of coolness in heavy brick and adobe walls
  176. Stochastic Modeling of Transient Heat Flow Through Walls
  177. Passive cooling in hot, arid regions in developing countries by employing domed roofs and reducing the temperature of internal surfaces
  178. A Small Air Velocity-Controlled Test Chamber for Emission Studies
  179. Aircraft Cabin Indoor Air Environment Requirements