All Stories

  1. Modification of ultrafiltration membrane with nanoscale zerovalent iron layers for humic acid fouling reduction
  2. Pre-coagulation on the submerged membrane fouling in nano-scale: Effect of sedimentation process
  3. Enhanced removal of manganese in organic-rich surface water by combined sodium hypochlorite and potassium permanganate during drinking water treatment
  4. Dependence of floc properties on coagulant type, dosing mode and nature of particles
  5. Application of Fe(II)/K2MnO4 as a pre-treatment for controlling UF membrane fouling in drinking water treatment
  6. Comparison of iron (III) and alum salt on ultrafiltration membrane fouling by alginate
  7. Pre-treatment for ultrafiltration: effect of pre-chlorination on membrane fouling
  8. Investigation of pre-coagulation and powder activate carbon adsorption on ultrafiltration membrane fouling
  9. Effect of low dosage of coagulant on the ultrafiltration membrane performance in feedwater treatment
  10. Investigation of the property of kaolin–alum flocs at acidic pH
  11. Effect of iron/aluminum hydrolyzed precipitate layer on ultrafiltration membrane
  12. The pre-treatment of submerged ultrafiltration membrane by coagulation—Effect of polyacrylamide as a coagulant aid
  13. Effect of humic acid on coagulation performance during aggregation at low temperature
  14. Membrane fouling by Fe-Humic cake layers in nano-scale: Effect of in-situ formed Fe(III) coagulant
  15. Comparison of submerged coagulation and traditional coagulation on membrane fouling: Effect of active flocs
  16. Aggregation of nano-sized alum–humic primary particles
  17. Effect of dosage strategy on Al-humic flocs growth and re-growth
  18. Breakage and re-growth of flocs: Effect of additional doses of coagulant species
  19. Influence of flocs breakage process on submerged ultrafiltration membrane fouling
  20. Effect of enhanced coagulation by KMnO4 on the fouling of ultrafiltration membranes
  21. Effect of two-stage coagulant addition on coagulation-ultrafiltration process for treatment of humic-rich water
  22. The role of mixing conditions on floc growth, breakage and re-growth
  23. Characterization of organic membrane foulants in a submerged membrane bioreactor with pre-ozonation using three-dimensional excitation–emission matrix fluorescence spectroscopy
  24. The effect of additional coagulant on the re-growth of alum–kaolin flocs
  25. Breakage and Regrowth of Al-Humic Flocs - Effect of Additional Coagulant Dosage
  26. Breakage and re-growth of flocs formed by charge neutralization using alum and polyDADMAC
  27. Effect of Coagulation and Applied Breakage Shear on the Regrowth of Kaolin Flocs
  28. Breakage and re-growth of flocs formed by alum and PACl