All Stories

  1. Selection of Parameters for Optimized WAAM Structures for Civil Engineering Applications

    Article • Materials, July 2023, MDPI AG

    Dr Norbert Enzinger

  2. Influence of Beam Figure on Porosity of Electron Beam Welded Thin-Walled Aluminum Plates

    Article • Materials, May 2022, MDPI AG

    Dr Norbert Enzinger

  3. Tailoring the alloy composition for wire arc additive manufacturing utilizing metal-cored wires in the cold metal transfer process

    Article • Materials & Design, March 2022, Elsevier

    Dr Norbert Enzinger

  4. Investigation of Al-B4C Metal Matrix Composites Produced by Friction Stir Additive Processing

    Article • Metals, December 2021, MDPI AG

    Dr Norbert Enzinger

  5. Local changes in the microstructure, mechanical and electrochemical properties of friction stir welded joints from aluminium of varying grain size

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Norbert Enzinger

  6. Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique

    Article • Materials, July 2020, MDPI AG

    Dr Norbert Enzinger

  7. Fatigue crack growth in full-scale railway axles – Influence of secondary stresses and load sequence effects

    Article • International Journal of Fatigue, March 2020, Elsevier

    Dr Norbert Enzinger

  8. Similar and dissimilar welds of ultrafine grained aluminium obtained by friction stir welding

    Article • Materials Science and Engineering A, March 2020, Elsevier

    Dr Norbert Enzinger

  9. Basic alloy development of low-transformation-temperature fillers for AISI 410 martensitic stainless steel

    Article • Science and Technology of Welding & Joining, October 2019, Taylor & Francis

    Dr Norbert Enzinger, Seyed Ali Hosseini

  10. CMT Additive Manufacturing of a High Strength Steel Alloy for Application in Crane Construction

    Article • Metals, June 2019, MDPI AG

    Dr Norbert Enzinger

  11. Microstructure development of molybdenum during rotary friction welding

    Article • Materials Characterization, May 2019, Elsevier

    Dr. Ricardo Henrique Buzolin, Dr Norbert Enzinger

  12. Methods for the measurement of ferrite content in multipass duplex stainless steel welds

    Article • Welding in the World, April 2019, Springer Science + Business Media

    Dr Norbert Enzinger

  13. Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials

    Article • Journal of Material Science and Technology, March 2019, Elsevier

    Dr Norbert Enzinger

  14. Influence of the focus wobbling technique on the integrity and the properties of electron beam welded MarBN steel

    Article • Welding in the World, January 2019, Springer Science + Business Media

    Dr Norbert Enzinger

  15. Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection

    Article • MATEC Web of Conferences, January 2019, EDP Sciences

    Dr Norbert Enzinger

  16. Powerful analytical solution to heat flow problem in welding

    Article • International Journal of Thermal Sciences, January 2019, Elsevier

    Dr Norbert Enzinger

  17. Hydrogen-induced plasticity in nanoporous palladium

    Article • Beilstein Journal of Nanotechnology, December 2018, Beilstein Institut

    Dr Norbert Enzinger

  18. Improving the integrity and the microstructural features of electron beam welds of a creep-resistant martensitic steel by local (de-)alloying

    Article • Welding in the World, December 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  19. An analytical solution for temperature distribution in fillet arc welding based on an adaptive function

    Article • Welding in the World, October 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  20. Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels

    Article • Journal of Materials Engineering and Performance, October 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  21. Thermo-mechanical testing of TiO2 functional coatings using friction stir processing

    Article • Materials Testing, September 2018, De Gruyter

    Dr Norbert Enzinger

  22. Thermo-metallurgically coupled numerical simulation and validation of multi-layer gas metal arc welding of high strength pearlitic rails

    Article • Welding in the World, August 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  23. Electron beam welding of copper using plasma spraying for filler metal deposition

    Article • Welding in the World, August 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  24. The influence of process parameters in linear friction welded 30CrNiMo8 small cross-section: a modelling approach

    Article • Science and Technology of Welding & Joining, July 2018, Taylor & Francis

    Dr Norbert Enzinger

  25. Rotary friction welding of molybdenum components

    Article • International Journal of Refractory Metals and Hard Materials, June 2018, Elsevier

    Dr Norbert Enzinger

  26. Residual stresses in 18CrNiMo7-6 linear friction welded high strength steel chains

    Article • The International Journal of Advanced Manufacturing Technology, March 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  27. Welding of S960MC with undermatching filler material

    Article • Welding in the World, March 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  28. Surface treatment for effective bonding in the sports industry

    Article • Materials Testing, February 2018, De Gruyter

    Dr Norbert Enzinger

  29. Wire-based additive manufacturing using an electron beam as heat source

    Article • Welding in the World, January 2018, Springer Science + Business Media

    Dr Norbert Enzinger

  30. Influence of static strength on the fatigue resistance of welds

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Norbert Enzinger

  31. 3D Modelling of Flash Formation in Linear Friction Welded 30CrNiMo8 Steel Chain

    Article • Metals, October 2017, MDPI AG

    Dr Norbert Enzinger

  32. Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steels

    Article • Welding in the World, May 2017, Springer Science + Business Media

    Dr Norbert Enzinger

  33. Modelling the flash formation of linear friction welded 30CrNiMo8 high strength steel chains

    Article • The International Journal of Advanced Manufacturing Technology, April 2017, Springer Science + Business Media

    Dr Norbert Enzinger

  34. Toughness evaluation of EB welds

    Article • Welding in the World, February 2017, Springer Science + Business Media

    Dr Norbert Enzinger

  35. Effect of tempering time on the mechanical properties of P91 flux cored wire weld metal

    Article • Welding in the World, November 2016, Springer Science + Business Media

    Dr Norbert Enzinger

  36. Increasing of toughness of brittle type S690 HSS weld metal by application of reversible temper embrittlement (RTE)

    Article • Welding in the World, November 2016, Springer Science + Business Media

    Dr Norbert Enzinger

  37. Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  38. Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  39. Electron Beam Welding of TZM Sheets

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  40. Systematic Investigation of the Temperature Field in Atmospheric Plasma Processing (APP)

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  41. Temperature Field Evolution during Flash Butt Welding of Railway Rails

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  42. Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Norbert Enzinger

  43. In situ characterization of hydrogen absorption in nanoporous palladium produced by dealloying

    Article • Beilstein Journal of Nanotechnology, August 2016, Beilstein Institut

    Dr Norbert Enzinger

  44. Experimental and numerical investigations on the punching failure of carbon fiber-reinforced plastics

    Article • Materials Testing, July 2016, De Gruyter

    Dr Norbert Enzinger

  45. Electron beam welding of thick-walled copper components

    Article • Science and Technology of Welding & Joining, July 2016, Taylor & Francis

    Dr Norbert Enzinger

  46. Fracture analysis of a low pressure steam turbine blade

    Article • Case Studies in Engineering Failure Analysis, April 2016, Elsevier

    Dr Norbert Enzinger

  47. Influence of Surface Roughness in Electron Beam Welding

    Article • IOP Conference Series Materials Science and Engineering, March 2016, Institute of Physics Publishing

    Dr Norbert Enzinger

  48. FRACTURE ANGLE SEARCH WITH PUCK'S 3D INTERFIBER FRACTURE CRITERION USING THE DAMPED NEWTON'S METHOD

    Article • Composites Mechanics Computations Applications An International Journal, January 2016, Begell House

    Dr Norbert Enzinger

  49. Adhesive tensile testing of atmospheric plasma sprayed zinc coating on a 1.4301 substrate

    Article • Materials Testing, August 2015, De Gruyter

    Dr Norbert Enzinger

  50. Evaluation of the factors influencing the strength of HSLA steel weld joint with softened HAZ

    Article • Welding in the World, August 2015, Springer Science + Business Media

    Dr Norbert Enzinger

  51. Development, Experiences and Qualification of Steel Grades for Hydro Power Conduits

    Article • WASSERWIRTSCHAFT, April 2015, Springer Science + Business Media

    Dr Norbert Enzinger

  52. Dissimilar welding of the creep resistant steels CB2 and P92 with flux cored wires

    Article • Welding in the World, March 2015, Springer Science + Business Media

    Dr Norbert Enzinger

  53. Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

    Article • BHM Berg- und Hüttenmännische Monatshefte, June 2014, Springer Science + Business Media

    Dr Norbert Enzinger

  54. Creep investigation and simulation of CB2 joints using similar rutile CB2 flux-cored wire

    Article • Welding in the World, June 2014, Springer Science + Business Media

    Dr Norbert Enzinger

  55. Electron beam surface structuring of AA6016 aluminum alloy

    Article • Welding in the World, May 2014, Springer Science + Business Media

    Dr Norbert Enzinger

  56. Calculation of hardness distribution in the HAZ of micro-alloyed steel

    Article • Welding in the World, May 2014, Springer Science + Business Media

    Dr Norbert Enzinger

  57. Properties of a creep resistant 9Cr-1.5Mo-1Co cast steel joint welded with a matching flux-cored wire

    Article • Welding in the World, May 2014, Springer Science + Business Media

    Dr Norbert Enzinger

  58. Friction Stir Welding of Aluminum Metal Matrix Composite Containers for Electric Components

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Dr Norbert Enzinger

  59. Dissimilar Electron Beam Welding of Nickel Base Alloy 625 and 9% Cr Steel

    Article • Procedia Engineering, January 2014, Elsevier

    Dr Norbert Enzinger

  60. Development, experience and qualification of steel grades for hydropower conduits

    Article • Steel Construction, November 2013, Wiley

    Dr Norbert Enzinger

  61. Mechanical Testing of Flow Drill Screw Joints Between Fibre-Reinforced Plastics and Metals

    Article • Materials Testing, October 2013, Carl Hanser Verlag

    Dr Norbert Enzinger

  62. FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

    Article • Welding in the World, July 2013, Springer Science + Business Media

    Dr Norbert Enzinger

  63. Physical and Numerical Simulations of the Microstructure Evolution in AA6082 during Friction Stir Processing by Means of Hot Torsion and FEM

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Dr Norbert Enzinger

  64. Study of Physical and Mechanical Properties of Aluminum 6092/SiC25p/t6 friction Stir Welded Plate

    Article • Asian Journal of Scientific Research, June 2013, Science Alert

    Dr Norbert Enzinger

  65. Influences on Arc Stability in Welding of Aluminum Pin-Structures

    Article • September 2012, Wiley

    Dr Norbert Enzinger

  66. Electron Beam Welding Of Atmcp Steel With 700 Mpa Yield Strength

    Article • Welding in the World, September 2012, Springer Science + Business Media

    Dr Norbert Enzinger

  67. Influence of the Soft Zone on The Strength of Welded Modern Hsla Steels

    Article • Welding in the World, May 2012, Springer Science + Business Media

    Dr Norbert Enzinger

  68. Friction stir welding of multilayered steel

    Article • Science and Technology of Welding & Joining, April 2012, Taylor & Francis

    Dr Norbert Enzinger

  69. Analysis of Plastic Flow during Friction Stir Spot Welding Using Finite Element Modelling

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Dr Norbert Enzinger

  70. Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

    Article • Metallurgical and Materials Transactions A, November 2011, Springer Science + Business Media

    Dr Norbert Enzinger

  71. Investigation of Friction Stir Welding of Stainless Steel Using a Stop-Action-Technique

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Dr Norbert Enzinger

  72. Characterisation of interface of steel/magnesium FSW

    Article • Science and Technology of Welding & Joining, January 2011, Taylor & Francis

    Dr Norbert Enzinger

  73. Vibration Stress Relief Treatment of welded high-strength martensitic steel

    Article • Welding in the World, January 2011, Springer Science + Business Media

    Dr Norbert Enzinger

  74. Joining of Aluminum and Steel in Car Body Manufacturing

    Article • Physics Procedia, January 2011, Elsevier

    Dr Norbert Enzinger

  75. The estimation of the contact interface temperature during resistance spot welding of zinc coated steels using numerical technique

    Article • Materialwissenschaft und Werkstofftechnik, November 2010, Wiley

    Dr Norbert Enzinger

  76. Thermo-Mechanical Investigations during Friction Stir Spot Welding (FSSW) of AA6082-T6

    Article • Welding in the World, May 2010, Springer Science + Business Media

    Dr Norbert Enzinger

  77. Microstructural and mechanical characterisation of friction stir welded 15-5PH steel

    Article • Science and Technology of Welding & Joining, April 2009, Taylor & Francis

    Dr Norbert Enzinger

  78. Investigation of Watergas Welded Joints for Future Decisions Concerning Old Hydropower Stations

    Article • Welding in the World, March 2009, Springer Science + Business Media

    Dr Norbert Enzinger

  79. Friction Stir Spot Welds between Aluminium and Steel Automotive Sheets: Influence of Welding Parameters on Mechanical Properties and Microstructure

    Article • Welding in the World, January 2009, Springer Science + Business Media

    Dr Norbert Enzinger

  80. Untersuchung der wassergasgeschweißten Druckrohrleitung Kaprun

    Article • Materials Testing, September 2008, Carl Hanser Verlag

    Dr Norbert Enzinger

  81. Optical 2D Displacement and Strain Sensor for Creep Testing of Material Samples in Transparent Fluids

    Article • May 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Norbert Enzinger

  82. Influence of plastic anisotropy on the mechanical behavior of clinched joint of different coated thin steel sheets

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Dr Norbert Enzinger

  83. Fracture mechanical investigation of steel grade S890 used in Cleuson–Dixence hydropower plant shaft

    Article • Science and Technology of Welding & Joining, July 2006, Taylor & Francis

    Dr Norbert Enzinger

  84. Investigation of cracks in original material of Cleuson-Dixence shaft

    Article • Science and Technology of Welding & Joining, May 2006, Taylor & Francis

    A K Bhaduri, Dr Norbert Enzinger