All Stories

  1. High Temperature Tribology of A413/B4C Nanocomposites under Dry Sliding Contact

    Article • Materials Performance and Characterization, January 2020, ASTM International

    Professor Prasanta Sahoo

  2. Finite element based study of radially elastically graded cylindrical contact against a rigid flat under plane stress condition

    Article • January 2019, American Institute of Physics

    Professor Prasanta Sahoo, Dr. Tamonash Jana

  3. Tribological behavior of electroless Ni–B–W coating at room and elevated temperatures

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2018, SAGE Publications

    Professor Prasanta Sahoo

  4. Friction analysis at elastic-plastic contact of rough surfaces using n-point asperity model

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2016, SAGE Publications

    Professor Prasanta Sahoo

  5. Evaluation and effect of loss of constraint on master curve reference temperature of 20MnMoNi55 steel

    Article • Engineering Fracture Mechanics, March 2015, Elsevier

    Professor Prasanta Sahoo

  6. Tribology Measurements

    Article • February 2015, Wiley

    Professor Prasanta Sahoo

  7. Optimization of WEDM Process Parameters for MRR and Surface Roughness using Taguchi-Based Grey Relational Analysis

    Article • International Journal of Materials Forming and Machining Processes, January 2015, IGI Global

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  8. Wear Characteristics Optimization of Al-7.5%Sic Metal Matrix Composite Using Taguchi Method

    Article • International Journal of Advanced Materials Manufacturing and Characterization, August 2014, Griet Publications

    Professor Prasanta Sahoo

  9. Parametric optimization of corrosion and wear of electroless Ni-P-Cu coating using grey relational coefficient coupled with weighted principal component analysis

    Article • International Journal of Mechanical and Materials Engineering, August 2014, Springer Science + Business Media

    Professor Prasanta Sahoo

  10. Effect of Process Parameters on Tribological Properties of Ni‒P‒Al2O3 Composite Coatings

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Professor Prasanta Sahoo

  11. Optimization of Tribological Properties of Electroless Ni-P Coatings under Lubrication Using WPCA

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Professor Prasanta Sahoo

  12. Effect of Process Parameters on Microhardness of Ni-P-Al2O3 Composite Coatings

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  13. Optimization Studies on Electroless Nickel Coatings:

    Article • International Journal of Manufacturing Materials and Mechanical Engineering, January 2014, IGI Global

    Professor Prasanta Sahoo

  14. Wear Behavior of Electroless Ni-P Coatings in Brine Solution and Optimization of Coating Parameters

    Article • Procedia Technology, January 2014, Elsevier

    Professor Prasanta Sahoo

  15. Optimization of Wear of Electroless Ni-P-Cu Coating Using Artificial Bee Colony Algorithm

    Article • Procedia Technology, January 2014, Elsevier

    Professor Prasanta Sahoo

  16. Finite Element Based Contact Analysis of Fractal Surfaces – Effect of Varying Elastic Modulus

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Prasanta Sahoo

  17. Friction performance of electroless Ni-P coatings in alkaline medium and optimization of coating parameters

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Prasanta Sahoo

  18. Influence of Process Parameters on Multiple Roughness Characteristics of Ni–P–TiO2 Composite Coatings

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Prasanta Sahoo

  19. Properties of Electroless Nickel at Elevated Temperature-a Review

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Prasanta Sahoo

  20. Comparative Study of Tribological Properties of Ni-P Coatings under Dry and Lubricated Conditions

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  21. A Study of Elastic-plastic Contact of Rough Surfaces Using N-point Asperity Model

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  22. Optimization of Electroless Ni–P–Al2O3 Composite Coatings based on Multiple Surface Roughness Characteristics

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  23. An Experimental Approach for Optimizing Coating Parameters of Electroless Ni-P-Cu Coating Using Artificial Bee Colony Algorithm

    Article • International Scholarly Research Notices, January 2014, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  24. Optimization of Surface Roughness and MRR in Electrochemical Machining of EN31 Tool Steel Using Grey-taguchi Approach

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  25. Application of Artificial Bee Colony Algorithm for Optimization of MRR and Surface Roughness in EDM of EN31 Tool Steel

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  26. Study of Mechanical Properties of Wood Dust Reinforced Epoxy Composite

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  27. Optimisation of EDM process parameters using grey-Taguchi technique

    Article • International Journal of Machining and Machinability of Materials, January 2014, Inderscience Publishers

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  28. Optimization of MRR and Surface Roughness in PAC of EN 31 Steel Using Weighted Principal Component Analysis

    Article • Procedia Technology, January 2014, Elsevier

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  29. Investigation on Electrochemical Machining of EN31 Steel for Optimization of MRR and Surface Roughness Using Artificial Bee Colony Algorithm

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  30. Optimization of Process Parameters in Plasma arc Cutting of EN 31 Steel Based on MRR and Multiple Roughness Characteristics Using Grey Relational Analysis

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Prasanta Sahoo

  31. Nonlinear Vibration Analysis of Simply Supported Stiffened Plate by a Variational Method

    Article • Mechanics of Advanced Materials and Structures, May 2013, Taylor & Francis

    Professor Prasanta Sahoo

  32. Estimation and comparative study of JIC using different methods for 20MnMoNi55 steel

    Article • Materials & Design (1980-2015), April 2013, Elsevier

    Professor Prasanta Sahoo

  33. Tribology Measurements

    Article • January 2013, Wiley

    Professor Prasanta Sahoo

  34. Tribology of Ceramics and Ceramic Matrix Composites

    Article • January 2013, Springer Science + Business Media

    Professor Prasanta Sahoo

  35. Finite Element based Parametric Study of Elastic-plastic Contact of Fractal Surfaces

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Prasanta Sahoo

  36. Friction Performance Optimization of Chemically Deposited Ni-P-W Coating Using Taguchi Method

    Article • ISRN Tribology, January 2013, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  37. Finite-Element-Based Multiple Normal Loading-Unloading of an Elastic-Plastic Spherical Stick Contact

    Article • ISRN Tribology, January 2013, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  38. Finite Element Based Unloading of an Elastic Plastic Spherical Stick Contact for Varying Tangent Modulus and Hardening Rule

    Article • International Journal of Surface Engineering and Interdisciplinary Materials Science, January 2013, IGI Global

    Professor Prasanta Sahoo

  39. Tribological Performance Optimization of Al-7.5% SiCp Composites Using the Taguchi Method and Grey Relational Analysis

    Article • Journal of Composites, January 2013, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  40. Friction Performance of Al-10%SiCp Reinforced Metal Matrix Composites Using Taguchi Method

    Article • ISRN Tribology, January 2013, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  41. Fracture Behaviour of 20MnMoNi55 Steel in DBT Region under Corrosive Environment

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Prasanta Sahoo

  42. Optimization of Electroless Ni-P-W Coatings for Minimum Friction and Wear Using Grey-Taguchi Method

    Article • Journal of Coatings, January 2013, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  43. Optimization of Material Removal Rate in EDM Using Taguchi Method

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor Prasanta Sahoo, Dr. KAUSHIK KUMAR

  44. ANN modelling of fractal dimension in machining

    Article • January 2012, Elsevier

    Professor Prasanta Sahoo

  45. Potentiodynamic Polarization Behaviour of Electroless Ni-P-W Coatings

    Article • ISRN Corrosion, January 2012, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  46. Experimental Investigation of Static Deflection and Loaded Natural Frequencies of Stiffened Plates

    Article • January 2012, ACTA Press

    Professor Prasanta Sahoo

  47. Effect of Strain Hardening on Elastic-Plastic Contact of a Deformable Sphere against a Rigid Flat under Full Stick Contact Condition

    Article • Advances in Tribology, January 2012, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  48. Optimization of Multiple Roughness Characteristics of Chemically Deposited Ni-P-W Coating Using Weighted Principal Component Analysis

    Article • ISRN Mechanical Engineering, January 2012, Hindawi Publishing Corporation

    Professor Prasanta Sahoo

  49. Dynamic Analysis of Rotating Annular Disk of Variable Thickness under Uniform Axial Pressure

    Article • International Journal for Computational Methods in Engineering Science and Mechanics, January 2012, Taylor & Francis

    Professor Prasanta Sahoo

  50. Large-amplitude dynamic analysis of stiffened plates with free edges

    Article • Journal of Mechanics of Materials and Structures, December 2011, Mathematical Sciences Publishers

    Professor Prasanta Sahoo

  51. Tribology of electroless nickel coatings – A review

    Article • Materials & Design (1980-2015), April 2011, Elsevier

    Professor Prasanta Sahoo

  52. Tribological characteristics of electroless Ni–B coating and optimization of coating parameters using Taguchi based grey relational analysis

    Article • Materials & Design (1980-2015), April 2011, Elsevier

    Professor Prasanta Sahoo

  53. Optimisation of tribological performance of electroless Ni–B coating using Taguchi method and grey relational analysis

    Article • Tribology - Materials Surfaces & Interfaces, March 2011, Taylor & Francis

    Professor Prasanta Sahoo

  54. Fractal Analysis in Machining

    Article • January 2011

    Professor Prasanta Sahoo

  55. Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method

    Article • International Journal of Manufacturing Materials and Mechanical Engineering, January 2011, IGI Global

    Professor Prasanta Sahoo

  56. Fractal Analysis in CNC Turning

    Article • January 2011, Springer Science + Business Media

    Professor Prasanta Sahoo

  57. Fractal Analysis in EDM

    Article • January 2011, Springer Science + Business Media

    Professor Prasanta Sahoo

  58. Fractal Analysis in Cylindrical Grinding

    Article • January 2011, Springer Science + Business Media

    Professor Prasanta Sahoo

  59. Fractal Analysis in CNC End Milling

    Article • January 2011, Springer Science + Business Media

    Professor Prasanta Sahoo

  60. Fundamental Consideration

    Article • January 2011, Springer Science + Business Media

    Professor Prasanta Sahoo

  61. Large Amplitude Forced Vibration Analysis of Stiffened Plates Under Harmonic Excitation

    Article • International Journal of Manufacturing Materials and Mechanical Engineering, January 2011, IGI Global

    Professor Prasanta Sahoo

  62. Fractal characterisation of electroless Ni-B coating and optimisation of coating parameters

    Article • International Journal of Computational Materials Science and Surface Engineering, January 2011, Inderscience Publishers

    Professor Prasanta Sahoo

  63. A parametric investigation of the friction performance of electroless Ni-B coatings

    Article • Lubrication Science, December 2010, Wiley

    Professor Prasanta Sahoo

  64. A Finite Element Study of Elastic-Plastic Hemispherical Contact Behavior against a Rigid Flat under Varying Modulus of Elasticity and Sphere Radius

    Article • Engineering, January 2010, Scientific Research Publishing, Inc,

    Professor Prasanta Sahoo

  65. Dynamic analysis of non-uniform taper bars in post-elastic regime under body force loading

    Article • Applied Mathematical Modelling, November 2009, Elsevier

    Professor Prasanta Sahoo, Debabrata Das

  66. Out-of-plane free vibration analysis of rotating tapered beams in post-elastic regime

    Article • Materials & Design (1980-2015), September 2009, Elsevier

    Professor Prasanta Sahoo, Debabrata Das

  67. An experimental study on transverse vibration of tapered bars in elasto-plastic regime

    Article • Journal of Sound and Vibration, July 2009, Elsevier

    Professor Prasanta Sahoo, Debabrata Das

  68. Dynamic analysis of non-uniform taper bars in post-elastic regime under uniform axial loading

    Article • Materials & Design (1980-2015), June 2009, Elsevier

    Professor Prasanta Sahoo, Debabrata Das

  69. Wear behaviour of electroless Ni–P coatings and optimization of process parameters using Taguchi method

    Article • Materials & Design (1980-2015), April 2009, Elsevier

    Professor Prasanta Sahoo

  70. Elastic–plastic adhesive contact of rough surfaces using n -point asperity model

    Article • Journal of Physics D Applied Physics, February 2009, Institute of Physics Publishing

    Professor Prasanta Sahoo

  71. Optimization of electroless NiP coatings based on multiple roughness characteristics

    Article • Surface and Interface Analysis, October 2008, Wiley

    Professor Prasanta Sahoo

  72. Elastic-plastic adhesive contact of non-Gaussian rough surfaces

    Article • Sadhana, August 2008, Springer Science + Business Media

    Professor Prasanta Sahoo

  73. Elasto-plastic strain analysis by a semi-analytical method

    Article • Sadhana, August 2008, Springer Science + Business Media

    Professor Prasanta Sahoo, Debabrata Das

  74. Large-amplitude dynamic analysis of simply supported skew plates by a variational method

    Article • Journal of Sound and Vibration, June 2008, Elsevier

    Professor Prasanta Sahoo, Debabrata Das

  75. Friction performance optimization of electroless Ni–P coatings using the Taguchi method

    Article • Journal of Physics D Applied Physics, April 2008, Institute of Physics Publishing

    Professor Prasanta Sahoo

  76. Fractal characterization and optimization of electroless Ni–P coatings

    Article • Journal of Physics D Applied Physics, January 2008, Institute of Physics Publishing

    Professor Prasanta Sahoo

  77. Elastic-Plastic Adhesive Contact of Rough Surfaces with Soft Coatings

    Article • Tribology Online, January 2008, Japanese Society of Tribologists

    Professor Prasanta Sahoo

  78. Optimization of Electroless Ni-P Coatings Based on Surface Roughness

    Article • Tribology Online, January 2008, Japanese Society of Tribologists

    Professor Prasanta Sahoo

  79. Tribological testing and optimisation of electroless Ni-P coatings based on Taguchi method and grey relational analysis

    Article • Tribotest, January 2008, Wiley

    Professor Prasanta Sahoo

  80. Tribological Performance Optimization of Electroless Ni–P Coatings Using the Taguchi Method and Grey Relational Analysis

    Article • Tribology Letters, August 2007, Springer Science + Business Media

    Professor Prasanta Sahoo

  81. Finite element contact analysis of fractal surfaces

    Article • Journal of Physics D Applied Physics, June 2007, Institute of Physics Publishing

    Professor Prasanta Sahoo

  82. Adhesive friction for elastic–plastic contacting rough surfaces considering asperity interaction

    Article • Journal of Physics D Applied Physics, June 2006, Institute of Physics Publishing

    Professor Prasanta Sahoo

  83. Adhesive friction for elastic–plastic contacting rough surfaces using a scale-dependent model

    Article • Journal of Physics D Applied Physics, February 2006, Institute of Physics Publishing

    Professor Prasanta Sahoo

  84. Asperity interaction in adhesive contact of metallic rough surfaces

    Article • Journal of Physics D Applied Physics, November 2005, Institute of Physics Publishing

    Professor Prasanta Sahoo

  85. Asperity interaction in elastic–plastic contact of rough surfaces in presence of adhesion

    Article • Journal of Physics D Applied Physics, August 2005, Institute of Physics Publishing

    Professor Prasanta Sahoo

  86. Design and Selection of Chemically Deposited Ni-P-W Coatings for Optimum Tribological Behavior

    Article • IGI Global

    Professor Prasanta Sahoo

  87. Large Amplitude Forced Vibration Analysis of Stiffened Plates under Harmonic Excitation

    Article • IGI Global

    Professor Prasanta Sahoo

  88. Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method

    Article • IGI Global

    Professor Prasanta Sahoo