All Stories

  1. Daylight performance of classroom design in academic universities - The case of the University of Sharjah

    Article • January 2023, American Institute of Physics

    Professor Abdul Hai Alami, Emad Mushtaha

  2. Synthesis and testing of cobalt leaf-like nanomaterials as an active catalyst for ethanol oxidation

    Article • International Journal of Hydrogen Energy, July 2020, Elsevier

    Professor Abdul Hai Alami

  3. Materials and logistics for carbon dioxide capture, storage and utilization

    Article • The Science of The Total Environment, May 2020, Elsevier

    Professor Abdul Hai Alami

  4. Investigating Various Permutations of Copper Iodide/FeCu Tandem Materials as Electrodes for Dye-Sensitized Solar Cells with a Natural Dye

    Article • Nanomaterials, April 2020, MDPI AG

    Professor Abdul Hai Alami

  5. Compressed air for light vehicle propulsion

    Article • February 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdul Hai Alami

  6. Comparison among various energy management strategies for reducing hydrogen consumption in a hybrid fuel cell/supercapacitor/battery system

    Article • International Journal of Hydrogen Energy, December 2019, Elsevier

    Professor Abdul Hai Alami

  7. Low-cost dye-sensitized solar cells with ball-milled tellurium-doped graphene as counter electrodes and a natural sensitizer dye

    Article • International Journal of Energy Research, June 2019, Wiley

    Professor Abdul Hai Alami

  8. Investigating various copper oxides-based counter electrodes for dye sensitized solar cell applications

    Article • Energy, May 2019, Elsevier

    Professor Abdul Hai Alami

  9. A cost-effective nanoparticle-gap-film SERS sensor using graphene nanospacer by one-step transfer-free mechanical milling

    Article • Journal of Applied Physics, February 2019, American Institute of Physics

    Professor Abdul Hai Alami, Lougouman Bichara

  10. Facile preparation of graphene coated copper electrodes via centrifugal milling for capacitive deionization applications

    Article • Desalination, November 2018, Elsevier

    Professor Abdul Hai Alami

  11. Experimental study of carbon dioxide as working fluid in a closed-loop compressed gas energy storage system

    Article • Renewable Energy, November 2018, Elsevier

    Professor Abdul Hai Alami

  12. Bulk turbostratic graphene deposition on aluminum substrates via high-pressure graphite blasting

    Article • Applied Nanoscience, August 2018, Springer Science + Business Media

    Professor Abdul Hai Alami

  13. Enhancement of spectral absorption of solar thermal collectors by bulk graphene addition via high-pressure graphite blasting

    Article • Energy Conversion and Management, January 2018, Elsevier

    Professor Abdul Hai Alami

  14. Experiments on surface hardening of aluminum components by high-energy centrifugal milling

    Article • The International Journal of Advanced Manufacturing Technology, December 2017, Springer Science + Business Media

    Professor Abdul Hai Alami

  15. Low pressure, modular compressed air energy storage (CAES) system for wind energy storage applications

    Article • Renewable Energy, June 2017, Elsevier

    Professor Abdul Hai Alami

  16. Experiments on polymer welding via concentrated solar energy

    Article • The International Journal of Advanced Manufacturing Technology, May 2017, Springer Science + Business Media

    Professor Abdul Hai Alami

  17. Assessment of silver nanowires infused with zinc oxide as a transparent electrode for dye-sensitized solar cell applications

    Article • Proceedings of the Institution of Civil Engineers - Energy, April 2017, Elsevier

    Professor Abdul Hai Alami

  18. One-step synthesis and deposition of few-layer graphene via facile, dry ball-free milling

    Article • MRS Advances, January 2017, Cambridge University Press

    Professor Abdul Hai Alami

  19. Facile and Cost-Effective Synthesis and Deposition of a YBCO Superconductor on Copper Substrates by High-Energy Ball Milling

    Article • Metallurgical and Materials Transactions A, September 2016, Springer Science + Business Media

    Professor Abdul Hai Alami

  20. Synthetic clay as an alternative backing material for passive temperature control of photovoltaic cells

    Article • Proceedings of the Institution of Civil Engineers - Energy, August 2016, Elsevier

    Professor Abdul Hai Alami

  21. Fe‐Cu metastable material as a mesoporous layer for dye‐sensitized solar cells

    Article • Energy Science & Engineering, February 2016, Wiley

    Professor Abdul Hai Alami

  22. Influence of Magnetic Field on the Mesoporous Structure of Fe-Cu Compounds in Dye-Sensitized Photovoltaic Cells

    Article • Metallurgical and Materials Transactions E, February 2016, Springer Science + Business Media

    Professor Abdul Hai Alami

  23. Assessment of Al-Cu-Fe compound for enhanced solar absorption

    Article • International Journal of Energy Research, December 2015, Wiley

    Professor Abdul Hai Alami

  24. The Fe-Cu Metastable Nano-scale Compound for Enhanced Absorption in the UV–Vis and NIR Ranges

    Article • Metallurgical and Materials Transactions E, November 2015, Springer Science + Business Media

    Professor Abdul Hai Alami

  25. Synthesis and optical properties of electrodeposited crystalline Cu2O in the Vis–NIR range for solar selective absorbers

    Article • Renewable Energy, October 2015, Elsevier

    Professor Abdul Hai Alami

  26. Synthesis and Microstructural and Optical Characterization of Fe-Cu Metastable Alloys for Enhanced Solar Thermal Absorption

    Article • Energy Procedia, August 2015, Elsevier

    Professor Abdul Hai Alami

  27. Experimental assessment of compressed air energy storage (CAES) system and buoyancy work energy storage (BWES) as cellular wind energy storage options

    Article • Journal of Energy Storage, June 2015, Elsevier

    Professor Abdul Hai Alami

  28. Experimental investigation of the effect of variously-shaped ribs on local heat transfer on the outer wall of the turning portion of a U-channel inside solar air heater

    Article • Heat and Mass Transfer, April 2015, Springer Science + Business Media

    Professor Abdul Hai Alami

  29. Modelling and verification of an acrylic adhesive as a hyperelastic material

    Article • Advances in Materials and Processing Technologies, April 2015, Taylor & Francis

    Professor Abdul Hai Alami

  30. Microstructural, optical and thermal characterization of synthetic clay as a passive cooling medium

    Article • Energy Conversion and Management, December 2014, Elsevier

    Professor Abdul Hai Alami

  31. Microstructural and optical studies of CuO thin films prepared by chemical ageing of copper substrate in alkaline ammonia solution

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Professor Abdul Hai Alami

  32. Size-dependent capacitance of NiO nanoparticles synthesized with cathodic contact glow discharge electrolysis

    Article • Journal of Power Sources, September 2014, Elsevier

    Professor Abdul Hai Alami

  33. Assessment of Using Secondary Concentrators for Nonferrous Material Removal Applications

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Professor Abdul Hai Alami

  34. Experimental investigation on paraboloid solar concentrator with a conical secondary concentrator

    Article • International Journal of Energy Research, April 2014, Hindawi Publishing Corporation

    Professor Abdul Hai Alami

  35. Design and analysis of a compact solar-driven constant-torque reaction steam turbine

    Article • Energy Conversion and Management, March 2014, Elsevier

    Professor Abdul Hai Alami

  36. Analytical and experimental evaluation of energy storage using work of buoyancy force

    Article • Journal of Renewable and Sustainable Energy, January 2014, American Institute of Physics

    Professor Abdul Hai Alami

  37. Effects of evaporative cooling on efficiency of photovoltaic modules

    Article • Energy Conversion and Management, January 2014, Elsevier

    Professor Abdul Hai Alami

  38. Experimental Evaluation of a Buoyancy Driven Energy Storage Device

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Abdul Hai Alami

  39. Investigation in utilizing paraboloid concentrators for thermal perforation of metals

    Article • Renewable Energy, August 2013, Elsevier

    Professor Abdul Hai Alami

  40. Experiments on unfired masonry clay bricks mixed with palm fronds and date pits for thermal insulation applications

    Article • Journal of Renewable and Sustainable Energy, March 2013, American Institute of Physics

    Professor Abdul Hai Alami

  41. Design and Construction of a Green, Controlled-Environment Dwelling in Jordan

    Article • International Journal of Thermal and Environmental Engineering, December 2010, International Association for Sharing Knowledge and Sustainability

    Professor Abdul Hai Alami

  42. Experiments on solar absorption using a greenhouse-effect gas in a thermal solar collector

    Article • Journal of Renewable and Sustainable Energy, September 2010, American Institute of Physics

    Professor Abdul Hai Alami

  43. Experiments on Olive Husk-Addition to Masonry Clay Bricks on their Mechanical Properties, and their Application and Manufacturability as an Insulating Material

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Professor Abdul Hai Alami

  44. Using Laminated Metal Tooling (LMT) in die manufacturing for clay moulding

    Article • May 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdul Hai Alami