All Stories

  1. Microalloying Additions to Commodity C-Mn Structural Steels: Fundamental Strengthening Mechanisms Leading to Improvements in Mechanical Properties, Alloy Optimization, Reduced Alloy Costs and Robustness of Hot Rolling Processing

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe, Dr Pello Uranga

  2. Challenges of Nb Application in Thermomechanical Processes of Steels for Long Products

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  3. Evaluating Strengthening and Impact Toughness Mechanisms for Ferritic and Bainitic Microstructures in Nb, Nb-Mo and Ti-Mo Microalloyed Steels

    Article • Metals, February 2017, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  4. Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  5. Effect of the Time between Last Deformation Pass and Accelerated Cooling on the Mechanical Properties in Nb and Nb-Mo Microalloyed Steels

    Article • Key Engineering Materials, October 2016, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  6. Evaluation of Toughness Characteristics of API Grade Pipeline Steel Produced on Compact Strip Production (CSP) Line

    Article • September 2016, ASME International

    Professor Jose M. Rodriguez-Ibabe

  7. Some Metallurgical Issues Concerning Austenite Conditioning in Nb-Ti and Nb-Mo Microalloyed Steels Processed by Near-Net-Shape Casting and Direct Rolling Technologies

    Article • Metallurgical and Materials Transactions A, August 2016, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  8. Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels

    Article • Materials Science and Engineering A, January 2016, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  9. Modelling of Static Recrystallization Behavior of High Manganese Austenitic Steels with Different Alloying Contents

    Article • ISIJ International, January 2016, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  10. Through-Thickness Homogenization in Thin Slab Direct Rolling of NB Microalloyed Steels

    Article • November 2015, Wiley

    Professor Jose M. Rodriguez-Ibabe

  11. Influence of DIT Parameters on the Cementite Spheroidization in a Low-Alloy Medium Carbon Steel

    Article • Metallurgical and Materials Transactions A, October 2015, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  12. Carbide size refinement by controlling the heating rate during induction tempering in a low alloy steel

    Article • Materials & Design (1980-2015), October 2014, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  13. Microstructural Features Intervening in Hot Workability of Free Cutting Steels

    Article • Materials Science Forum, May 2014, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  14. Influence of Prior Warm Deformation on Cementite Spheroidization Process in a Low-Alloy Medium Carbon Steel

    Article • Metallurgical and Materials Transactions A, October 2013, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  15. Role of Mo on Static Recrystallization Kinetics in Coarse Grained Nb Microalloyed Steels

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  16. Study of Recrystallization in High Manganese Steels by Means of the EBSD Technique

    Article • Materials Science Forum, March 2013, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  17. Austenite Grain Refinement in Direct Charging Based Thermomechanical Processes

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  18. Some Aspects Regarding Microstructural Heterogeneities during Steel Processing

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  19. New Trends and Technologies in Thin-Slab Direct Rolling: Improved Microstructure & Mechanical Behavior

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  20. Recrystallisation and grain growth in hot working of steels

    Article • January 2012, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  21. Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  22. Effect of deformation temperature on microstructure and mechanical behaviour of warm working vanadium microalloyed steels

    Article • Journal of Materials Science, January 2011, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  23. Thermomechanical Processing and Role of Microalloying in Eutectoid Steels

    Article • January 2011, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  24. Effect of Coiling Temperature on Microstructure and Mechanical Properties of a Nb-V Microalloyed Steel

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  25. Relevance of Static and Dynamic Recrystallizations on Austenite Grain Refinement in Nb-Mo Microalloyed Steels

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  26. Influence of Thermomechanical Processing on the Austenite–Pearlite Transformation in High Carbon Vanadium Microalloyed Steels

    Article • ISIJ International, January 2010, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  27. Microalloying and austenite evolution during hot working in near net shape processed steels

    Article • Materials Science and Technology, September 2009, Taylor & Francis

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  28. Role of carbon and nitrogen content on microstructural homogeneity in thin slab direct rolled microalloyed steels

    Article • Ironmaking & Steelmaking, April 2009, Taylor & Francis

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  29. Role of Vanadium Microalloying in Austenite Conditioning and Pearlite Microstructure in Thermomechanically Processed Eutectoid Steels

    Article • ISIJ International, January 2009, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  30. Additional grain refinement in recrystallization controlled rolling of Ti-microalloyed steels processed by near-net-shape casting technology

    Article • Materials Science and Engineering A, June 2008, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  31. Improved Model of Kinetics of Strain Induced Precipitation and Microstructure Evolution of Nb Microalloyed Steels during Multipass Rolling

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  32. Evaluation of Physical Parameters in Modelling Softening-Precipitation Interaction in Hot Worked Nb Microalloyed Austenite

    Article • March 2007, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  33. Evaluation of Physical Parameters in Modelling Softening-Precipitation Interaction in Hot Worked Nb Microalloyed Austenite

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  34. Microstructural Modelling of Nb Microalloyed Steels during Thin Slab Direct Rolling Processing

    Article • steel research international, March 2007, Wiley

    Professor Jose M. Rodriguez-Ibabe, Dr Pello Uranga

  35. Effect of Mo on Dynamic Recrystallization Behavior of Nb-Mo Microalloyed Steels

    Article • ISIJ International, January 2007, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  36. Optimization of Rolling Conditions in Nb Microalloyed Steel Processed by Thin Slab Casting and Direct Rolling Route: Processing Maps

    Article • November 2005, CrossRef Test Account

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  37. Thin Slab Direct Rolling of Microalloyed Steels

    Article • November 2005, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  38. Influence of Ti on Static Recrystallization in Near Net Shape Steels

    Article • November 2005, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  39. Modeling Ferrite Grain Size Distributions during the Transformation of Hot Worked Austenite

    Article • November 2005, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  40. Ferrite Grain Size Refinement in Vanadium Microalloyed Structural Steels

    Article • November 2005, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  41. Influence of Vanadium Microaddition on the Microstructure and Mechanical Properties of High Strength Large Diameter Wire-Rods

    Article • November 2005, CrossRef Test Account

    Professor Jose M. Rodriguez-Ibabe

  42. Optimization of Rolling Conditions in Nb Microalloyed Steel Processed by Thin Slab Casting and Direct Rolling Route: Processing Maps

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  43. Thin Slab Direct Rolling of Microalloyed Steels

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  44. Influence of Ti on Static Recrystallization in Near Net Shape Steels

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  45. Modeling Ferrite Grain Size Distributions during the Transformation of Hot Worked Austenite

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  46. Ferrite Grain Size Refinement in Vanadium Microalloyed Structural Steels

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  47. Influence of Vanadium Microaddition on the Microstructure and Mechanical Properties of High Strength Large Diameter Wire-Rods

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  48. Toughness and fatigue behaviour of eutectic and hypereutectic Al–Si–Cu–Mg alloys produced through lost foam and squeeze casting

    Article • Materials Science and Technology, December 2004, Taylor & Francis

    Professor Jose M. Rodriguez-Ibabe

  49. Study of Nucleation Mechanisms during Dynamic Recrystallization of a Coarse Nb Microalloyed Austenite

    Article • Materials Science Forum, October 2004, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  50. Evolution of the main intermetallic phases in Al-Si-Cu-Mg casting alloys during solution treatment

    Article • Journal of Materials Science, February 2004, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  51. Modeling of Austenite Grain Size Distribution in Nb Microalloyed Steels Processed by Thin Slab Casting and Direct Rolling (TSDR) Route

    Article • ISIJ International, January 2004, Iron and Steel Institute of Japan

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  52. Cleavage micromechanisms on microalloyed steels. Evolution with temperature of some critical parameters

    Article • Scripta Materialia, January 2004, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  53. Caracterización microestructural y mecánica de la aleación de Al-Si A357 producida mediante rheocasting

    Article • Revista de Metalurgia, December 2003, Departmento de Publicaciones del CSIC

    Professor Jose M. Rodriguez-Ibabe

  54. Wear behaviour of eutectic and hypereutectic Al–Si–Cu–Mg casting alloys tested against a composite brake pad

    Article • Materials Science and Engineering A, December 2003, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  55. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steels

    Article • Materials Science and Engineering A, November 2003, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  56. Austenite Evolution Modeling in Nb Microalloyed Steels during Thin Slab Direct Rolling

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  57. Study of Grain Boundary Ferrite Nucleation in V Microalloyed Steels by EBSD

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  58. Microstructural Changes during Stress Relaxation of a Deformed Nb-V Microalloyed Austenite

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  59. The role of grain size in brittle particle induced fracture of steels

    Article • Materials Science and Engineering A, April 2003, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  60. Thixoforming of an automotive part in A390 hypereutectic Al–Si alloy

    Article • Journal of Materials Processing Technology, April 2003, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  61. Transition between static and metadynamic recrystallization kinetics in coarse Nb microalloyed austenite

    Article • Materials Science and Engineering A, March 2003, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  62. Static recrystallization mechanisms in a coarse-grained Nb-microalloyed austenite

    Article • Metallurgical and Materials Transactions A, October 2002, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  63. Characterization of the dissolution of the Al2Cu phase in two Al–Si–Cu–Mg casting alloys using calorimetry

    Article • Materials Characterization, July 2002, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  64. Modeling of partially recrystallized microstructures for a coarse initial Nb microalloyed Austenite

    Article • Scripta Materialia, June 2002, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  65. Effect of composition and processing route on the wear behaviour of Al–Si alloys

    Article • Scripta Materialia, March 2002, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  66. Static recrystallization kinetics in warm worked vanadium microalloyed steels

    Article • Materials Science and Engineering A, May 2001, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  67. Interaction between Recrystallization and Precipitation during Multipass Rolling in a Low Carbon Niobium Microalloyed Steel.

    Article • ISIJ International, January 2001, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  68. Static Recrystallization Behaviour of a Wide Range of Austenite Grain Sizes in Microalloyed Steels.

    Article • ISIJ International, January 2000, Iron and Steel Institute of Japan

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  69. Fracture Static Mechanisms on Fatigue Crack Propagation in Microalloyed Forging Steels

    Article • Journal of Engineering Materials and Technology, January 2000, ASME International

    Professor Jose M. Rodriguez-Ibabe

  70. Influence of vanadium on static recrystallization in warm worked microalloyed steels

    Article • Scripta Materialia, December 1999, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  71. Brittle fracture micromechanisms in bainitic and martensitic microstructures in a C-Mn-B steel

    Article • Scripta Materialia, June 1999, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  72. Relationship between the austenite recrystallized fraction and the softening measured from the interrupted torsion test technique

    Article • Scripta Materialia, February 1999, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  73. Determination of energetic parameters controlling cleavage fracture in a Ti-V microalloyed ferrite-pearlite steel

    Article • Scripta Materialia, January 1999, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  74. The Role of Microstructure in Toughness Behaviour of Microalloyed Steels

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  75. Warm Forging of a Vanadium Microalloyed Steel

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  76. Cleavage Fracture Micromechanisms in Ti, Ti-V and C-Mn-B Microalloyed Bainitic Steels

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  77. Effect of Coarse γ Grain Size on the Dynamic and Static Recrystallisation during Hot Working in Microalloyed Nb and Nb-Ti Steels

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  78. Efecto del vanadio en la forja en tibio de un acero con contenido medio de carbono

    Article • Revista de Metalurgia, May 1998, Departmento de Publicaciones del CSIC

    Professor Jose M. Rodriguez-Ibabe

  79. Improvement of mechanical properties in structural steels by development of acicular ferrite microstructures

    Article • Journal of Constructional Steel Research, April 1998, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  80. DETERMINATION OF THE ENERGETIC PARAMETERS CONTROLLING CLEAVAGE FRACTURE INITIATION IN STEELS

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 1997, Wiley

    Professor Jose M. Rodriguez-Ibabe

  81. Influence of the amount and morphology of retained austenite on the mechanical properties of an austempered ductile iron

    Article • Metallurgical and Materials Transactions A, May 1997, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  82. A mechanistic approach to the life prediction of 316L stainless steel under combined creep/fatigue cycling Rodriguez-Ibabe, J.M., Martin-Meizoso, A., Martinez-Esnaola, J.M. and Fuentes, M. Mater. Sci. Engng A (1 Apr. 95) 194 (1), 25–33

    Article • International Journal of Fatigue, May 1997, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  83. Comportamiento a tracción a temperaturas ambiente y elevadas de nuevos composites basados en aleaciones hipereutécticas de Al-Si

    Article • Revista de Metalurgia, February 1997, Departmento de Publicaciones del CSIC

    Professor Jose M. Rodriguez-Ibabe

  84. Influence of Microstructure on Mechanical Properties of Hypereutectic Al-Si Alloys

    Article • Key Engineering Materials, November 1996, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  85. Conformado de aleaciones en estado semisólido. Aplicación a aleaciones hipereutécticas de Al-Si

    Article • Revista de Metalurgia, August 1996, Departmento de Publicaciones del CSIC

    Professor Jose M. Rodriguez-Ibabe

  86. Influencia de la microestructura en la fractura de aceros microaleados de forja

    Article • Revista de Metalurgia, June 1996, Departmento de Publicaciones del CSIC

    Professor Jose M. Rodriguez-Ibabe

  87. Semi-solid processing of novel MMCs based on hypereutectic aluminium-silicon alloys

    Article • Acta Materialia, May 1996, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  88. Strength and toughness of semi-solid processed hypereutectic AlSi alloys

    Article • Scripta Materialia, February 1996, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  89. Characterization of low-cycle fatigue and creep-fatigue induced damage in a 316L stainless steel (Characterisierung von durch niedrigperiodische Ermudung und durch schleichende Ermudung verursachte Schaden im Falle von Nichtrostendem Stahl A 316) Simon...

    Article • International Journal of Fatigue, January 1996, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  90. A mechanistic approach to the life prediction of 316L stainless steel under combined creep/fatigue cycling

    Article • Materials Science and Engineering A, April 1995, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  91. Cleavage fracture of microalloyed forging steels

    Article • Scripta Metallurgica et Materialia, February 1995, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  92. Comparison between brittle fracture micromechanisms at 77K in precracked specimens and in notched specimens

    Article • International Journal of Fracture, January 1995, Springer Science + Business Media

    Professor Jose M. Rodriguez-Ibabe

  93. Low cycle fatigue and creep fatigue behaviour of a 316L stainless steelSimon, S., Ibabe, J.M.R. and Fuentes, M. Z. Metallk. (Oct. 1993) 84(10), 708–715

    Article • International Journal of Fatigue, January 1994, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  94. Improvement of fracture toughness of forging steels microalloyed with titanium by accelerated cooling after hot working

    Article • Scripta Metallurgica et Materialia, November 1993, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  95. Influence of the microstructure on the fracture toughness and fracture mechanisms of forging steels microalloyed with titanium with ferrite-pearlite structures

    Article • Scripta Metallurgica et Materialia, August 1993, Elsevier

    Professor Jose M. Rodriguez-Ibabe

  96. Influence of Composition and Thermal History on the Dynamic Recrystallisation and Subsequent Hot Ductility of Mild Steels.

    Article • ISIJ International, January 1993, Iron and Steel Institute of Japan

    Professor Jose M. Rodriguez-Ibabe

  97. Influence of Composition on the Dynamic Recrystallization and Subsequent Hot Ductility of Mild Steels

    Article • Materials Science Forum, January 1993, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe

  98. Influence of heat treatments on microstructure and toughness of austempered ductile iron

    Article • Materials Science and Technology, March 1992, Taylor & Francis

    Professor Jose M. Rodriguez-Ibabe

  99. Influence of heat treatments on microstructure and toughness of austempered ductile iron

    Article • Materials Science and Technology, March 1992, Maney Publishing

    Professor Jose M. Rodriguez-Ibabe

  100. Influence of dynamic recrystallisation on hot ductility of aluminium killed mild steel

    Article • Materials Science and Technology, December 1989, Taylor & Francis

    Professor Jose M. Rodriguez-Ibabe

  101. Influence of dynamic recrystallisation on hot ductility of aluminium killed mild steel

    Article • Materials Science and Technology, December 1989, Maney Publishing

    Professor Jose M. Rodriguez-Ibabe

  102. FATIGUE CRACK PATH IN MEDIUM-HIGH CARBON FERRITE-PEARLITE STRUCTURES

    Article • January 1984, Elsevier

    Professor Jose M. Rodriguez-Ibabe